Manufacturing Engineer Job Vacancies in Maharashtra

Department: R&D / Production / Technical ServicesLocation: Vile-Bhagad MIDC, Tal: Mangaon, Dist: Raigad, MaharashtraSalary: Best in the IndustryExperience: Minimum 3-8 Years (preferred in rubber compounding and product development)Qualification: B.Tech / B.E. in Polymer Engineering / Rubber Technology / Chemical Engineering / Mechanical Engineering (with Rubber Industry experience)Role Objective:Lead end-to-end rubber product development, process standardization, production consistency, quality improvement, and cost optimization while ensuring customer and manufacturing requirements are achieved.Key Requirements:- Degree/Diploma in Rubber Technology / Polymer Engineering / Chemical Engineering or equivalent.- Experience in rubber compounding, formulation development, and manufacturing process control.- Hands-on experience in developing products from: Concept, Compound formulation, Prototype, Validation, Production scale-up, Commercial manufacturing.- Strong knowledge of: Natural Rubber (NR), EPDM, Development of sponge items viz. Gaskets etc.- Understanding of: Mixing and compounding, Extrusion, Compression molding, Vulcanization / curing systems.- Experience in compound optimization for performance and cost reduction.Key Responsibilities:Product Development:- Develop new rubber compounds and finished products as per customer requirements.- Optimize formulation for performance, manufacturability, and commercial viability.- Conduct trials, validation, and product qualification.Production Consistency:- Ensure consistent production output through process monitoring and standardization.- Control batch-to-batch variation and improve process capability.- Establish manufacturing parameters and process controls.Cost Saving & Continuous Improvement:- Drive cost reduction through compound optimization, alternative raw material qualification, yield improvement, waste and rejection reduction, and productivity enhancement.- Lead value engineering initiatives.Quality & Testing:- Define acceptance criteria and quality standards.- Analyze product failures and implement corrective actions.- Review and approve inspection and test reports.Employment Type: Full-Time

We are looking for a Senior Quality Engineer with 5 to 10 years of experience to enhance our quality assurance processes. This role is based in Solapur, India, and requires a proactive approach to ensure product quality and compliance with industry standards.Key Responsibilities:- **Quality Assurance Planning**: Develop and implement quality assurance plans to ensure that products meet specified standards and requirements.- **Testing and Evaluation**: Conduct comprehensive testing, including system audits and process evaluations, to identify and resolve quality issues effectively.- **Collaboration**: Work closely with cross-functional teams, including production and engineering, to ensure quality expectations are met throughout the product lifecycle.- **Documentation and Reporting**: Maintain precise documentation of testing procedures, results, and compliance standards, and prepare detailed reports for management review.- **Continuous Improvement**: Drive continuous improvement initiatives by analyzing quality metrics and recommending corrective actions to prevent recurrence of defects.Required Skills and Expectations:Candidates should hold a graduate degree and possess strong analytical, problem-solving, and project management skills. A working knowledge of quality tools and methodologies such as Six Sigma or ISO standards is essential. The ideal candidate should also have excellent communication skills, be detail-oriented, and be able to work collaboratively within a team. We are seeking a dedicated individual who is committed to maintaining high-quality standards and passionate about contributing to continuous enhancement of our product quality.

Production Engineer manages and optimizes the manufacturing of precision electric motors and motion control solutions. This involves tracking operational efficiency, allocating manpower, ensuring quality control, and driving continuous shop-floor improvements.Key Responsibilities:-Production Planning: Allocate manpower, balance assembly lines, and plan daily/weekly schedules to meet delivery commitments. Efficiency Monitoring: Track operation cycle times, identify production bottlenecks, and minimize machine downtime. Data Analysis: Record and analyze daily production data, specifically monitoring output, rework, scrap, and rejection rates. Quality Control: Ensure all manufactured parts meet strict engineering tolerances and standard operating procedures (SOPs).Shop-Floor Management: Enforce 5S, safety protocols, and waste reduction methods. Maintenance: Coordinate preventive and breakdown maintenance for production machinery. Cross-Functional Coordination: Collaborate with the Quality, Stores, and Maintenance departments to maintain a smooth production flow.Candidate Requirements Education: Diploma or B.E./ B.Tech in Mechanical or Production Engineering. Experience: Typically ranges from 2 to 8 years in the manufacturing sector, with some entry-level roles available. Technical Skills: Hands-on experience with CNC machines, plastic moulding, machine shops, and manufacturing operations. Continuous Improvement: Familiarity with lean manufacturing tools such as Kaizen, Poka-Yoke, and waste elimination

We are looking for a Senior Engineer Manufacturing to join our team in Nashik. In this role, you will be responsible for improving manufacturing processes and ensuring high-quality production standards.**Key Responsibilities:**- **Process Improvement**: Analyze current manufacturing processes and propose improvements to enhance efficiency and productivity. This includes identifying bottlenecks and implementing solutions.- **Quality Assurance**: Collaborate with the quality control team to establish and monitor quality standards in manufacturing. Your goal will be to minimize defects and maintain top-notch product quality.- **Technical Support**: Provide technical assistance to the manufacturing team during production runs. You will help troubleshoot equipment issues and ensure smooth operations.- **Documentation**: Prepare and maintain documentation related to manufacturing processes, quality checks, and improvements. This will help in tracking progress and compliance with industry standards.- **Collaboration**: Work closely with cross-functional teams, including design and supply chain, to ensure that manufacturing aligns with product specifications and delivery schedules.**Required Skills and Expectations:**- A Bachelors degree in Engineering (B.E) is required for this position.- You should have 0 to 3 years of experience in manufacturing or a related field.- Strong analytical and problem-solving skills are essential to develop effective solutions.- Good communication and teamwork skills are necessary for collaboration with diverse teams.- Familiarity with manufacturing technologies and methodologies will be advantageous. Your contributions will play a vital role in our manufacturing success, and we look forward to having you on our team.

A Mechanical Engineer Researches, Designs, Develops, Tests, and Oversees the Manufacturing of Mechanical/thermal Devices, Including Tools, Engines, and Machines. They Analyze Problems, Create Solutions Using Cad Technology, and Ensure Systems are Safe and Efficient. Key Roles Involve Product Prototyping, Testing, and Managing Projects from Concept to Completion Across Industries like Automotive, Aerospace, and Manufacturingkey Responsibilitiesdesign & Development: Creating Blueprints for Mechanical Systems, Components, and Tools Using Cad Software.testing & Analysis: Developing Prototypes, Conducting Experiments, and Analyzing Data to Refine Designs.project Management: Managing Budgets, Timelines, and Technical Documentation.manufacturing & Maintenance: Overseeing Production Processes and Repairing/modifying Equipment.collaboration: Working with other Engineers and Suppliers to Ensure Compliance with Safety and Technical Standards.

Job Description Senior Design EngineerDepartment: Design & EngineeringIndustry: Metal Manufacturing / Sheet Metal / FabricationJob PurposeTo lead and execute design activities for metal components and assemblies, optimize designs for manufacturability, and drive continuous improvement using AutoCAD and Kaizen methodologies.Key ResponsibilitiesCreate and review detailed AutoCAD drawings for metal parts and assemblies.Design sheet metal, fabrication, welding, and machined components.Lead design reviews and ensure manufacturability and cost optimization.Coordinate with production, quality, purchase, and sales teams.Handle customer drawings, RFQs, and technical discussions.Implement Kaizen initiatives to improve design efficiency, reduce waste, and optimize processes.Support tooling development, jigs, and fixtures.Guide and mentor junior design engineers.Ensure compliance with quality, safety, and industry standards.Required SkillsStrong proficiency in AutoCAD (2D & basic 3D preferred).In-depth knowledge of metal manufacturing processes.Strong understanding of GD&T, tolerances, and BOMs.Practical knowledge of Kaizen, lean manufacturing, and continuous improvement tools.Problem-solving and analytical skills.Leadership and team coordination skills.QualificationsBE / BTech in Mechanical or Production Engineering.Experience510 years in design engineering within the metal manufacturing industry.

A Mechanical Design Engineer designs, develops, and tests mechanical systems and products (like robotics, tools, appliances) using physics & engineering, creating CAD models, prototypes, and technical docs, ensuring functionality, performance, and manufacturability from concept to production, involving research, calculations, and collaboration with manufacturing teams. Key tasks include problem-solving, CAD modeling (SolidWorks, Inventor), design validation, and project management. Key Responsibilities:Design & Development: Create new mechanical designs and modify existing ones for improved efficiency or performance, from concept to physical product.CAD & Documentation: Develop detailed 2D/3D CAD models, technical drawings, and specifications.Analysis & Testing: Perform simulations, conduct tests, and analyze feasibility/performance of designs.Prototyping: Oversee the creation and testing of physical prototypes.Technical Support: Provide guidance to manufacturing, maintenance, and installation teams, writing operational manuals.Project Management: Manage technical aspects of projects, meeting timelines and objectives. Essential Skills & Qualifications:Education: Bachelor's degree in Mechanical Engineering.CAD Software: Proficiency in tools like SolidWorks, Inventor, Catia, AutoCAD.Engineering Principles: Strong grasp of mechanical/thermal principles, physics, and design calculations.Problem-Solving & Analysis: Excellent critical thinking and analytical skills.Communication: Strong written and verbal skills for technical documentation and team collaboration.Technical Skills: Understanding of manufacturing processes, materials, and project management.

Company: Leading automotive engineering company in PuneJob description: Co-ordination between internal teams, vendors and end customers Day to day update to HOD regarding new and current on-going projects Support BD for RFQ study for any missing details and relevant previous project data and practices Internal target dates assigning and final time plan preparation & submission to customer CFT formation for new projects. Arrange for review & kick-off sessions accordingly BOP & Polymer developments for new products. Other existing products implementation for effective productivity & cost reduction Sound knowledge of Checking Fixture development, Jigs, SPMs Follow-ups with vendors for moulds, fixtures & BOP Plan and Manage tool trials, collect trial feedback and implement/review with internal departments Project Scope Change validation and execution with team Timely update to customer about project progress and issues Final CAD sign-off with customer, polymer finalisation, confirmation, DVP sign-off if any Alerting internal teams for any delay/go-slow/further continuation of the project after receiving the clearances/intimation Timely and proper generation of MIS reports about project developments, plans, budgets, risk, ECR, etcEducational Qualification: BE mechanical /Production with MBATechnical Skills: Catia V5, 3D CAD Engineering knowledge of PPC, Mfg. Engg, painting, et, Contemporary / relevant AutoCAD packages 2D/3DSoft Skills: Communications skills, team building, customer interaction skills Good interpersonal skills, communication and behavioural mind-setExperience: 4-5 years of experience with 3-4 years in automotive manufacturing and proven experience in end to end project management

Job: Quality EngineerPosition: 04Location Vasai EastEngineering Manufacturing CompanyKey Responsibilities: Perform in-process and final quality inspections during production. Inspect raw materials, semi-finished, and finished goods. Document and report quality issues and non-conformities. Ensure products meet company and customer quality standards. Support in identifying root causes and implementing corrective actions. Assist with quality audits and compliance checks. Maintain daily reports, quality checklists, and test records. Knowledge of Measuring Instruments. Production planning. Additional works as instructed. Maintain documentation of inspections and test results. Documentation works related to Quality.Key Skills Required: Strong attention to detail. Basic knowledge of quality control methods. Willingness to work as per work. Ability to read basic technical drawings. Good communication and reporting skills. Team player with a positive attitude. Basic computer skills for documentation. Multi-tasking.Additional Information: On-the-job training will be provided. Candidates must be physically fit and willing to work in a manufacturing environment. Immediate joiners preferred.Role: Quality EngineerIndustry Type: ManufacturingDepartment: QualityEmployment Type: Full Time, PermanentRole Category: Quality - Other

Company: Leading automotive engineering company in PuneJob description: Co-ordination between internal teams, vendors and end customers Day to day update to HOD regarding new and current on-going projects Support BD for RFQ study for any missing details and relevant previous project data and practices Internal target dates assigning and final time plan preparation & submission to customer CFT formation for new projects. Arrange for review & kick-off sessions accordingly BOP & Polymer developments for new products. Other existing products implementation for effective productivity & cost reduction Sound knowledge of Checking Fixture development, Jigs, SPMs Follow-ups with vendors for moulds, fixtures & BOP Plan and Manage tool trials, collect trial feedback and implement/review with internal departments Project Scope Change validation and execution with team Timely update to customer about project progress and issues Final CAD sign-off with customer, polymer finalisation, confirmation, DVP sign-off if any Alerting internal teams for any delay/go-slow/further continuation of the project after receiving the clearances/intimation Timely and proper generation of MIS reports about project developments, plans, budgets, risk, ECR, etcEducational Qualification: BE mechanical /Production with MBATechnical Skills: Catia V5, 3D CAD Engineering knowledge of PPC, Mfg. Engg, painting, et, Contemporary / relevant AutoCAD packages 2D/3DSoft Skills: Communications skills, team building, customer interaction skills Good interpersonal skills, communication and behavioural mind-setExperience: 6-9 years of experience with 4-6 years in automotive manufacturing and proven experience in end to end project management

Company: Leading automotive engineering company in PuneJob description: Co-ordination between internal teams, vendors and end customers Day to day update to HOD regarding new and current on-going projects Support BD for RFQ study for any missing details and relevant previous project data and practices Internal target dates assigning and final time plan preparation & submission to customer CFT formation for new projects. Arrange for review & kick-off sessions accordingly BOP & Polymer developments for new products. Other existing products implementation for effective productivity & cost reduction Sound knowledge of Checking Fixture development, Jigs, SPMs Follow-ups with vendors for moulds, fixtures & BOP Plan and Manage tool trials, collect trial feedback and implement/review with internal departments Project Scope Change validation and execution with team Timely update to customer about project progress and issues Final CAD sign-off with customer, polymer finalisation, confirmation, DVP sign-off if any Alerting internal teams for any delay/go-slow/further continuation of the project after receiving the clearances/intimation Timely and proper generation of MIS reports about project developments, plans, budgets, risk, ECR, etcEducational Qualification: BE mechanical /Production with MBATechnical Skills: Catia V5, 3D CAD Engineering knowledge of PPC, Mfg. Engg, painting, et, Contemporary / relevant AutoCAD packages 2D/3DSoft Skills: Communications skills, team building, customer interaction skills Good interpersonal skills, communication and behavioural mind-setExperience: 4-5 years of experience with 3-4 years in automotive manufacturing and proven experience in end to end project management

Key ResponsibilitiesProcess Improvement: Assist in designing and implementing efficient manufacturing processes. Identify bottlenecks and suggest improvements to reduce cycle time.Production Support: Provide real-time technical support to the production team to resolve machine breakdowns or assembly line issues.Documentation: Create and maintain Standard Operating Procedures (SOPs), Work Instructions, and Process Flow Charts.Quality Control: Collaborate with the Quality department to monitor rejection rates and implement corrective actions (CAPA) for manufacturing defects.Tooling & Jigs: Assist in the design and procurement of jigs, fixtures, and specialized tools required for assembly or machining.Data Analysis: Collect and analyze production data (OEE - Overall Equipment Effectiveness) to track performance against targets.Required Technical SkillsDesign Software: Basic proficiency in AutoCAD or SolidWorks for reading and modifying engineering drawings.Lean Manufacturing: Knowledge of 5S, Kaizen, and Six Sigma principles.ERP/Systems: Familiarity with SAP or Tally for logging production entries and material consumption.Technical Literacy: Ability to interpret GD&T (Geometric Dimensioning and Tolerancing) symbols on blueprints.

Key ResponsibilitiesProduction Planning: Developing and managing production schedules to ensure on-time delivery of orders.Process Optimization: Identifying bottlenecks in the manufacturing line and implementing improvements to increase Throughput.Resource Management: Supervising shop-floor staff, including operators and technicians, to ensure high productivity.Quality Assurance: Collaborating with the Quality Control (QC) team to monitor product specifications and reduce Rejection Rates.Equipment Maintenance: Coordinating with the Maintenance department for preventive maintenance of CNC, VMC, or specialized assembly machines.Documentation: Maintaining Daily Production Reports (DPR), material consumption logs, and ISO/IATF documentation.

Responsibilities:Understanding Project Requirements: Collaborate with stakeholders to understand project objectives, functional requirements, and design specifications.Conceptual Design and Development: Generate innovative design concepts and solutions that meet project requirements, considering factors such as functionality, cost-effectiveness, manufacturability, and safety.Detailed Design and Drafting: Create detailed 2D and 3D models, drawings, and Bill of Materials (BOM) using CAD software ([Specify CAD Software - e.g., AutoCAD, SolidWorks, CATIA]).Engineering Calculations and Analysis: Perform necessary engineering calculations, simulations, and analyses (e.g., stress analysis, thermal analysis) to validate designs and ensure performance.Material Selection: Select appropriate materials based on design requirements, performance criteria, and cost considerations.Design Optimization: Continuously evaluate and optimize designs for improved performance, efficiency, and manufacturability.Prototyping and Testing Support: Collaborate with the manufacturing and testing teams during the prototyping and testing phases, providing design modifications and support as needed.Documentation: Prepare and maintain comprehensive design documentation, including drawings, specifications, calculations, and test reports.Collaboration with Cross-Functional Teams: Work closely with engineers from other disciplines (e.g., manufacturing, quality, production), as well as project managers and suppliers, to ensure seamless product development.Adherence to Standards: Ensure that designs comply with relevant industry standards, regulations, and company guidelines.Problem Solving: Investigate and resolve design-related issues that may arise during development or production.Continuous Improvement: Stay updated with the latest design trends, technologies, and software to enhance design capabilities and efficiency.

We are seeking a dedicated Production Engineer to join our team in Chakan, Pune. The ideal candidate will have 2 to 5 years of experience and a graduate degree, and should be ready to collaborate in a dynamic environment to enhance production efficiency.Key Responsibilities:1. **Production Planning**: Develop and implement effective production schedules to meet customer demands while ensuring optimal use of resources and minimizing waste.2. **Process Improvement**: Analyze current manufacturing processes and suggest improvements to enhance efficiency, quality, and safety standards across the production floor.3. **Quality Control**: Monitor production timelines and quality metrics, ensuring that all products meet strict quality specifications before they reach customers.4. **Collaboration**: Work closely with other departments, such as design and quality assurance, to ensure seamless production flow and address any issues that may arise.5. **Documentation**: Maintain clear and accurate records of production procedures, adjustments, and outcomes to support continuous improvement initiatives.Required Skills and Expectations:Candidates must have strong analytical and problem-solving skills, along with a solid understanding of manufacturing processes. Excellent communication and teamwork abilities are essential for collaborating effectively with cross-functional teams. The ideal applicant will show initiative and take ownership of projects, driving them to completion while maintaining high standards. Experience in a similar role will be an advantage, and a proactive approach to learning and adapting in a fast-paced work environment is expected.

Knowledge of experience in - Design and Development Costing, Gear machine shop, Gear HOBBING. We are seeking a Costing Engineer with 2 to 5 years of experience to join our team in Chakan, Pune. The ideal candidate will have a background in engineering and a strong understanding of cost analysis to help ensure our projects are financially viable.Key Responsibilities:1. **Cost Estimation**: Prepare detailed cost estimates for projects by analyzing specifications, blueprints, and other relevant documentation to provide accurate forecasts.2. **Budget Management**: Monitor project budgets and expenses throughout the lifecycle of projects, ensuring adherence to financial targets and identifying cost-saving opportunities.3. **Data Analysis**: Use Excel and other software tools to analyze production costs and pricing, helping to develop strategies for competitive pricing and enhanced profitability.4. **Collaboration**: Work closely with project managers, engineers, and other stakeholders to gather necessary information for effective costing and ensure alignment on financial goals.5. **Reporting**: Create regular reports detailing cost performance metrics and present findings to management for informed decision-making.Required Skills and Expectations:The successful candidate should hold a relevant engineering degree and possess strong analytical skills to interpret data effectively. Proficiency in costing tools and software, particularly Excel, is essential. Strong communication abilities and a collaborative attitude are necessary to work well within teams. The candidate should be detail-oriented, motivated, and able to meet tight deadlines in a fast-paced work environment. Being proactive and adaptable to changes will contribute to success in this role.

We are looking for a Moulding Engineer based in Chakan, Pune, with 2 to 5 years of experience in the moulding process. The ideal candidate will be responsible for ensuring the effective operation and maintenance of moulding machines used in manufacturing.Key responsibilities include:1. **Mould Design and Development**: Collaborate with the design team to create and improve mould designs that enhance production efficiency and product quality.2. **Process Optimization**: Monitor and analyze the moulding process to identify areas for improvement and implement changes to reduce defects and waste.3. **Machine Operation and Maintenance**: Operate and maintain moulding machines, ensuring they function optimally and adhere to safety standards.4. **Quality Control**: Conduct regular inspections of moulded products to ensure they meet the required specifications and quality standards.5. **Troubleshooting and Problem-Solving**: Identify and resolve any production issues related to moulding processes quickly to minimize downtime and maintain productivity.Required skills and expectations include a strong understanding of moulding technologies, excellent analytical abilities for process improvements, and good communication skills to work effectively with cross-functional teams. Candidates must possess a high level of attention to detail and be capable of operating machinery safely and effectively. A graduate degree in engineering or a related field is required, and only male candidates will be considered for this full-time office-based position.

URGENT OPENINGPurchase Executive (Engineering Materials)In anEngineering Manufacturing CompanyJob Location:Ghatkopar West, Mumbai, MaharashtraQualifications: Experience 5-6 years in the Manufacturing Engineering Industry. Qualifications: Any Graduate or Diploma in Mechanical Engineering Salary 25k to 28k per month Immediate Joining

Job Description: Position: Project Engineer Job Location: Goregaon East (Mumbai) Maharashtra Qualification: B.E. / B. Tech Chemical Engineering Experience: 5- 10 yearsJob Description: Preparation and Review of PFDs, P&IDs, Line List Plant Layouts, Piping GA & Isometric drawings,Fabrication drawings and technical specification sheets. Drawing checking & approval as perrequirements. Coordinate with Detail engineering consultants for timely deliverables. Budget and Cost estimation preparation. Generation of Bill of Material as per requirement for plant equipment, piping & structures etc. Float inquiry & selection of required material as per process requirements & correspondencewith supplier. Indents, Work orders preparation & finalization with detailed scope & technicalrequirements. Technical comparison preparation & finalization of the same with the purchasing department. Preparation of detailed equipment technical specifications, requisition for purchase, technical bidanalysis, quality assurance plan Approving the Equipment fabrication drawings Visit the vendor's manufacturing workshops for expediting the manufacturing and follow up withsuppliers for the timely delivery of equipment at the site Coordination & Follow-ups with various contract agencies to completion of project work withinTargeted time frame. Attending progress review meetings with contractorsTesting and Commissioning of installed equipment & piping system with the pneumatic test, hydrotest, spark test, trial run, vacuum test etc. Participate in the HAZOP study.

Urgent RequirementQA Documentation AssociatesEngineering Manufacturing CompanyVillage Mahim, BIDCO Road, Palghar, West MaharashtraExperience: 3 to 6 YearsEducation: Diploma/Degree in Production EngineeringImmediate Joining is required The candidate will handle the total quality-related documentation They should know about the ISO, Quality Department, Instruments