Jobs in Chakan, Pune

Need to handle Chakan plant for Shot Blasting and Painting process.1) Need to possess following knowledge related to Painting Process Aware of surface preparation and painting related international standards like ASTM, NACE, ISO and SSPC etc. Familiar with Aramco/ ADNOC painting specifications is preferred. Aware of requirements for surface preparation by blasting for CS, SS and Al and tests for the same. Aware of climatic conditions requirements during blasting, surface preparation and painting. Aware of air quality requirements Aware of primer for Al and two main types of primers for carbon steel and their pros and cons. Aware the function of MIOs. Aware of various types of primers, paints and their pros and cons. Aware of paint preparation and application requirements. Aware of how paint coverage is achieved on sharp corners and edges. Aware of post painting tests. Aware of how the gloss of paint film can be improved Preparation of painting quality records at different stages from surface preparation to post painting. Prepare SOPs, WI, QAP and ITP for complete blasting and painting process. Propose painting scheme as per customers requirements of corrosion protection. Monitor surface preparation, painting process. Aware of how to do paint patch work (at paint damage portion) which will aesthetically also looks good. Monitoring inspection of all tests from surface preparation to post painting. Aware of air less painting. Analysis of painting rejection and rework and CAPA for the same. Monitoring of shelf life of primer and paints. Qualification of new paint cycles. Train painters for good quality painting and work efficiency. Handling of TPI. Exposure to 7 tank pre treatment, powder coating, fire proof coating is preferred. Development and auditing of Painting and Powder coating vendors. Carry out kaizen projects for cost reduction and better work efficiency. Monitor 5S and housekeeping of paint shop Prepare QMS and EHS documents, records for internal, external audit.2) Need to possess following knowledge related to Shot Blasting Processa) Equipment related Abrasive recovery system/ Dust collection system/ Blast cabinet and Work handling systemb) Operational parameters relatedMedia velocity/ Media selection (size, hardness, density)/ Impact angle/ Flow rate/ Air Qualityc) Surface cleanliness standardSA2.5/ SA3.0d) Health, Safety and Environment relatedPPEs/ Regulatory compliances/ Pre-processing requirements3) Manage Shot Blasting and Paint Shop by planning the workload on daily basis. Have handled the workers.4) Chakan plant has spring cartridge assembly facility, which involves, robot welding set up.The candidate need to oversee spring cartridge assembly also.5) Good Verbal and written communication skill.Education ------ Dip Mech/ BE Mech/ Dip in Paint Technology and NACE Level 2 qualification for Painting Process is must.Experience ----- Around 9 years.CTC -------------- To suit qualifications, experience.

We are looking for a friendly and organized Front Desk Receptionist to join our team in Chakan Pune. In this role, you will be the first point of contact for our visitors, providing excellent customer service and support to ensure smooth operations.Key Responsibilities:1. Greet Visitors: Welcome guests warmly and professionally, making them feel comfortable and valued.2. Manage Phone Calls: Answer incoming calls, direct them to the appropriate department, and take accurate messages when needed.3. Schedule Appointments: Assist in organizing meetings and appointments, coordinating schedules for staff and clients.4. Maintain Records: Keep the reception area tidy and organized, ensuring all documents and materials are in order.5. Provide Information: Respond to inquiries from guests and clients about services, company policies, and general information.Required Skills and Expectations:Candidates should possess strong communication skills and a positive attitude towards customer service. A high school diploma (10th Pass) is required, and candidates with 0 to 2 years of experience in a similar role are encouraged to apply. Proficiency in basic computer skills is essential, as you will be using software for scheduling and record-keeping. We expect you to be reliable, punctual, and able to handle multiple tasks in a busy environment while maintaining professionalism and a friendly demeanor.

Job Title: Quality HeadLocation: Chakan, PuneExperience: 7-12 years in manufacturing quality (preferably automotive, electrical, or industrial fabrication)Role OverviewThe Quality Head will lead quality assurance and control across Assembly, Machining parts, Aluminium Casting, Zinc Casting, Aluminium Extrusion, Powder Coating / Surface finishing, and Packaging operations. The role demands strong technical depth, customer interface capability, and supplier development skills to ensure consistent product quality and continuous improvement.Key Responsibilities: Implement and sustain quality management systems across all production stages. Oversee powder coating and surface finishing quality thickness, adhesion, gloss, curing, and visual standards. Ensure compliance with ISO 9001 / IATF 16949 / VDA 6.3 and customer-specific requirements. Conduct incoming, in-process, and final inspection for castings, extrusions, and coated assemblies. Lead root cause analysis (RCA) and corrective/preventive actions (CAPA) for internal and supplier issues. Guide suppliers on process capability improvement, coating parameter control, and defect prevention. Maintain cordial relationships with domestic and overseas customers, ensuring timely communication and resolution. Review and approve PPAP, FMEA, Control Plans, and MSA documentation. Drive continuous improvement projects using tools like 5 Why, Fishbone, Pareto, SPC, and Poka-Yoke. Collaborate with production and design teams to ensure DFM/DFA and coating feasibility. Supervise packaging quality corrugated box integrity, labeling, and export readiness. Prepare and present monthly quality performance dashboards and customer feedback summaries.Desired Skills & Competencies Strong knowledge of machining tolerances, casting defects, extrusion finish, and powder coating process control. Familiarity with surface finishing techniques such as anodizing, plating, buffing, and polishing. Hands-on experience with CMM/VMM, coating thickness gauges, gloss meters, and adhesion testers. Excellent communication and customer handling skills (domestic & overseas). Leadership ability to train and mentor quality engineers and inspectors. Analytical mindset with proficiency in Excel-based dashboards and trend analysis.Education B.E. / B.Tech in Mechanical / Production / Metallurgy Certification in Quality Management Systems preferred (ISO Lead Auditor, Six Sigma Green Belt)Mahima Consultancy

Hiring Purchase Engineer (Casting) for Manufacturing company at Chakan Pune.Education ------ BE in Mech or Production EnggExperience ---- Around 6-7 Years. Need to possess following attributes / skills1) Hands on in Material Procurement Planning.- Need to be very good in xcel (V Look up and Pivot Table)- Knowledge of Micros is added advantage- Knowledge of SAP is added advantage2) Good verbal and written communication skills.Good coordinator with Design, Stores, QA and Production.3) Responsible for procurement of following category of partsSteel Castings - SG Iron and Investment castingsAl Castings - PDC and Low Gravity Die CastingAl ExtrusionsMachining of Castings and Extrusions - Involves HMC, VMCMachining of Shafts, Tube - Involves CNC Turning, Milling, Grinding and Honing.Welding of Carbon Steel and SS parts (welding done by certified welder having WPS/ PQR)Cold and Hot Rolled Springs upto 70 mm wire diaLaser cuttingPickling, Passivation, Plating, Painting etcInjection moulded parts/ Rubber SealsVarious Bought outs like Motors, Pumps, Accumulators, Hydraulic Cylinders and Valves.Electrical, Oil/ Grease, Hardwares and Packing materials.4) Knowledgeable in Vendor Development of SG Iron Castings/ Investment Castings and its machining.- Pattern manufacturing/ Casting process/ Machining of Castings- Vendors for above processes around Pune/ Ahmadabad/ Sangli/ Kolhapur/ Rajkot.5) Knowledgeable in Vendor Development of Low Pressure Die Casting/ PDC and its machining 6) Good exposure to Import formalities.7) Good in negotiation skills and related commercial aspects. 8) Need to be able toa) get quality components (first time right)b) develop suppliers having lowest lead time of supply.c) control the inventoryd) reduce the cost of procurement.Shall report to Purchase Manager/ Plant Head.

We are looking for a Quality Engineer to join our team in Chakan. The ideal candidate will have 1 to 3 years of experience and a Bachelors degree in Engineering. This full-time role requires working on-site to ensure our products meet the highest quality standards.Key Responsibilities:- Quality Inspection: Conduct inspections on raw materials and finished products to ensure they meet specific quality criteria. This helps identify any defects early in the production process.- Develop Quality Control Procedures: Create and implement procedures for quality control. These procedures will guide the team in maintaining consistent quality standards throughout production.- Analyze Data: Gather and analyze data related to product quality. This involves using statistical tools to identify trends and areas for improvement, leading to better quality control.- Collaborate with Teams: Work closely with manufacturing and engineering teams to resolve quality issues. Effective communication will help ensure that all departments work towards the same quality goals.- Documentation: Maintain accurate records of inspections, tests, and quality assessments. Proper documentation is essential for tracking quality performance over time and for compliance with regulations.Required Skills and Expectations:- Strong understanding of quality management systems and methodologies.- Proficiency in using quality inspection tools and software.- Good analytical skills to interpret data and draw conclusions.- Excellent communication and teamwork abilities to collaborate effectively across departments.- Detail-oriented mindset to identify and resolve quality issues accurately.

We are looking for a dedicated Purchase Engineer to join our team in Chakan. This role is ideal for individuals who have recently graduated or have a few years of experience. The primary focus of this position is to manage procurement activities effectively while maintaining high standards of quality and cost efficiency.Key Responsibilities:- Supplier Management: Identify and evaluate suppliers to ensure they meet quality and cost criteria, establishing positive relationships for ongoing support.- Procurement Coordination: Collaborate with various departments to understand their procurement needs and ensure timely delivery of materials and services.- Cost Analysis: Monitor and analyze market trends to achieve the best pricing and terms for purchased goods, ensuring budget compliance.- Quality Assurance: Inspect incoming materials and ensure they meet company standards before they are accepted into inventory.- Documentation Management: Maintain accurate records of purchases, supplier agreements, and inventory levels to facilitate smooth operations.Required Skills and Expectations:- A Bachelor's degree in Engineering (B.E) is essential, providing a strong technical foundation.- Strong analytical skills to evaluate suppliers and negotiate contracts effectively.- Excellent communication skills, both verbal and written, to liaise with suppliers and team members.- Basic knowledge of procurement processes and materials management is preferred.- Ability to work independently and as part of a team, demonstrating problem-solving skills and attention to detail.The successful candidate will be proactive, organized, and eager to learn within a dynamic work environment.

Job Title: Accounts AssistantLocation: Chakan,PuneReports To: Accounts HeadQualifications & Experience* Graduate with Minimum 1-4 years of experience in accounting and finance* Strong knowledge of Indian accounting standards, taxation, and ERP systems (e.g., SAP, Tally 9, Oracle) & MS Excel* Experience in manufacturing or engineering industries preferred.Key Responsibilities Oversees all accounting operations including general ledger, accounts payable/receivable, payroll, and taxation. Ensure timely and accurate preparation of financial statements in compliance with statutory requirements. Lead budgeting, forecasting, and variance analysis processes. Monitor cash flow, working capital, and fund management. Implement and maintain robust internal controls and risk management systems. Coordinate with auditors for statutory, internal, and tax audits. Ensure compliance with GST, TDS, Income Tax, and other applicable laws. Drive process improvements and automation in financial operations. Collaborate with supply chain, production, and commercial teams for cost optimization. Mentor and develop the finance team to build a high-performance culture.If interested please share your updated Resume on mahimaconsultancy05@gmail.com with below mentioned details.Mahima Consultancy, Nagpur.Contact: 9096446948 / 9881581617www.mahimaconsultancy.com