B.E./B.tech Job Vacancies in Dombivli

Design Solar Power Systems (rooftop and Ground-mounted) Based On Customer Requirements and Site Conditions.perform Detailed Electrical, Mechanical, and Structural Design of Solar Pv Systems.conduct Feasibility Studies, Site Surveys, and Energy Audits.develop and Optimize Designs to Ensure Maximum Energy Generation and Efficiency.design Documentation:prepare and Review Technical Design Documentation, Including Layouts, Single-line Diagrams (slds), Electrical Schematics, and System Specifications.ensure Designs Meet Local Codes, Regulations, and Industry Standards.create Bills of Materials (bom) and Procurement Lists for Project Implementation.software Tools:use Solar Design Software Tools (solar Lab, Pvsyst, Helioscope, Autocad Etc) for System Modeling and Simulation.perform Shading Analysis, and Energy Production Estimation, and Select Appropriate Components (panels, Inverters, Etc.).project Coordination:collaborate with Project Managers, Electrical Engineers, and Installation Teams to Ensure Designs are Implemented Accurately.provide Technical Support During the Installation and Commissioning Phases.review and Optimize System Performance During Operation and Suggest Modifications When Required.customer Interaction:provide Pre-sales Support By Working with Clients to Understand Their Energy Needs and Presenting Tailored Solar Solutions.communicate with Clients and Stakeholders to Address Design-related Queries and Offer Solutions.prepare Technical Proposals and Reports for Customer Presentations.research & Development:stay Up-to-date with Advancements in Solar Technology, Materials, and Industry Trends.continuously Seek Ways to Improve Design Efficiency and Reduce System Costs.key Requirements:educational Qualification:bachelors Degree in Electrical Engineering, Renewable Energy, Mechanical Engineering, or a Related Field.experience:minimum 6 Months-3 Years of Experience in Solar System Design, Including Hands-on Experience with Design Software.previous Experience in Designing Residential, Commercial, or Industrial Solar Power Systems is Preferred.technical Skills:proficient in Using Solar Design Software (pvsyst, Helioscope, Autocad, or Equivalent).strong Understanding of Solar Energy Principles, Electrical Systems, and Mechanical Design.knowledge of Electrical Standards, Codes, and Regulations (such as Is, Iec, Etc.).ability to Perform Site Assessments and Generate Detailed System Designs.soft Skills:strong Problem-solving and Analytical Skills.good Communication and Interpersonal Skills to Collaborate Effectively with Customers, Engineers, and Project Teams.attention to Detail and Ability to Meet Deadlines in a Fast-paced Environment.other Skills:familiarity with Project Management Tools is a Plus.ability to Work Independently and Manage Multiple Projects Simultaneously.preferred Qualifications:certification in Solar Pv Design (e.g., Nabcep, or Equivalent) is a Plus.experience with Grid-connected and Off-grid Systems.knowledge of Energy Storage Systems and Hybrid Solar Solutions.

PROJECT HANDLE INDEPENDENTLY

1. Detailed study of commercial terms & technical scope of Product/Project enquiry document received from sales/support team. 2. Prepare & Send the Request for quotation (RFQ) to obtain the offers from concerned vendors. 3. Review the obtained offers from vendors & prepare technical bid evaluation. Arrange & carry out the Techno-commercial discussion with vendors.4. Prepare & send techno-commercial bid to sales/support team.5. Material procurement support Technical clearance, drawing approvals, Negotiation with vendors & material follow-up for timely deliveries.6. To check the material technically through IMIR (Incoming Material Inspection Report) and receive purchased materials forwarded by the receiving department7. Support function for Project Execution, Project Co-Ordination, and Technical Problem Solving for Product/Projects.8. Reports collections from Estimation Engineers and share the same with management / sales head.9. Discussion with sales head for entire planning, prioritizing, execution of inquiries and purchase orders10. Discuss with engineering department for service related job.11. Coordinating with other estimation engineers on daily basis for entire planning and execution of enquiries received from sales.12. Ensure all Estimation Engineers updating all inquiry details in ERP software (Focus)13. Daily reporting to management.

Job Responsibilities-Produce engineering documents.Produce test procedures, reports and manuals.Contact suppliers for technical support to project managers.Analyse and solve technical problems and provide solutions in a timely manner.Investigate new technologies or existing technologiesRelease production order on SAP.Keep up to date record of 3D drawings with BOM, Manufacturing drawings for Production file release.To study the feedback received from the production department andtake corrective and timely action.Skills RequiredBE Degree in Mechanical Engineering.Sound knowledge of design tools like 3D software Solid Edge / Solid Works, Autocad etc.Knowledge of ERP software.Experience 3 YearsDesired Skills and ExperienceProduct Design, Product Testing, Mechanical Engineering, Engineering, Adjustments, Design, Computer-Aided Design (CAD)Interested candidate can share their resume-hrshivangi770@gmail.com

Electrician ITI/Diploma Job Description / Job Requirements: Installing, maintaining, and repairing electrical control, wiring, and lighting systems HT& LT panels. Reading technical diagrams and blueprints. Performing general electrical maintenance. Repairing and replacing equipment, electrical wiring, and fixtures. Inspecting transformers, circuit breakers, and other electrical components. Troubleshooting electrical issues using appropriate testing devices. Repairing and replacing equipment, electrical wiring, and fixtures. Performing circuit breaker corrective maintenance. Maintaining good knowledge of heating and air conditioning systems as well as various testing equipment Install, maintain, modify and repair all electrical distribution systems and associated electrical equipment Complete work orders and record material utilized on jobs Survey electrical systems, circuits and plansPWD electrical supervisor license is must.Diploma or Bachelors degree in Electrical Engineering.Minimum 3 to 5 years of experience required.Offshore experience would be an additional advantage.Good analytical communication and interpersonal skills required.Salary 35 to 50,000 Plus offshore allowance

Post Personal DriverLocation : Vashi Navi MumbaiShift : General 6 days work Qualification max 12th Passed Skill : A valid driving licenseKnowledge of traffic rules and regulationsSound judgement and decision-makingExcellent driving skillsProficiency in using navigational software to map routesTime management and organizational skillsAbility to communicate with passengers and clients

Generate new leads and direct clients within mobile and digital technologies.Negotiate contract rates with clients, with a focus on company profitability goals and objectives.Engage with C-level, VP, and Director-level contacts of mid-size and large companies. Must be interested in cold calling, pitching to the right person, and fixing appointments for corporate presentations.Talk to influencers and decision-makers involved in procuring IT/software & development.Qualify prospects and identify potential opportunities.Regular follow-ups with the prospects that have been identified as potential clients and who have shown interest to use our services.Preparing Quotation for the clients

Job TitleSales engineerIndustry of the EmployerManufacturing , engineering , oil and gas , FMGCFunctional Area : Sales BDSales engineer (Spray Nozzles )- Present solutions to clients and secure sales contracts.- Forecast target by searching the market needs and to develop the business and promote our products.- Responsible of Market Research, Visiting recent and new customers.- Knowledge of and past experience in sales of Spray Nozzle and Instrumentation industry is desired.- Ability to quickly assimilate technical and market knowledge across product line and communicate to a broad set of customers in several vertical segments.- Self-starter, well organized with a passion to win is a must.Able to build great relationship with customers.Experience of influencing and managing customer relationships in a technical community environment.Analytical and strategic-thinking abilities, customer orientation, networking abilities, understanding of global consumer and commercial markets, and strong teamwork skills.Marketing & Sales of Spray Nozzle and familiarity with emerging market.Product understanding and Techno commercial selling.Meeting monthly sales targets.The candidate will lead company in marketing and sales pan India. Identify objectives, strategies and action plans to improve short- and long-term sales. Establish, maintain and expand customer base.Should be very strong and dynamic in marketing and acquiring new accounts.Should be in position to work independently and develop customer-focused solutions.Adapts and executes quickly to changing business conditions.Only candidates with experience in core marketing of Spray Nozzle, business development and customer acquisition may apply.Qualification : B.TECH , DIPLOMA ( MACHANICAL ENGINEER )Experience : 3 YEAR TO 5 YEARLocation : THANE , NAVI MUMBAI

The candiate must have good communication skills. She need to attend the parents & students in a effective satisfactory manner. She must have good manners & etiquettes to facilitate the smooth interaction with the parents & students. Able to make correspondence through email in English, Hindi & Marathi effectively , precisely. . Able to prepare the students with all necessary documentation & procedural aspects for their education in abroad universities.. Prepare their details in excel spreadsheet & keep ready for master counsellor .

we have urgent requirement for production engineerjob description -Plan and coordinate production engineering processes on daily basis to produce high quality products.Execute production schedule for achieving planned production planning timely & accurately along with optimum utilization of resources.Acting efficiently on schedule of Work order and Raw Materials.Ensure accuracy in production as per the specifications of design of products.Ensure least breakdown time for the Machines.Monitor product standards and implementing quality-control programs.Planning of tools and Accessories, and Monitoring Machines Maintenance.Accurate and timely reporting to the management.Ensure that health & safety guidelines are followed properly.Maintain Daily / Weekly / Monthly Production Reports and MIS.Supervise and motivate team members to meet production targets.Ensure proper housekeeping of the premises by the team.Executes lean and 5S standards for existing production lines as per the guidelinesDrive root cause analysis and improvement proposals.qualification - diploma or be mechanical exp- min 2 to 8 yrs job locations - thane , navi mumbai ,mumbai ,bhiwandi , asangaon , panvel , vasai , khopoli

Job Description: Piping Stress Engineer Experience: between 2-7 yearsLocation- Mumbai.Work Experience & Education: Piping Engineering/ Piping Draughtsman Minimum 2- 5 years relevant experience in piping designingJob Responsibilities: 1) CAESAR II Modelling.2) Load Case Formation.3) Stress Analysis of critical lines like Pump Suction and Discharge lines, Distillation column lines, Horizontal and Vertical Vessels lines, etc.4) Code Compliance.5) Flange Leakage test using Pressure Equivalent Method.6) WRC 107 Testing of Pressurized Vessels.7) Node Marking.8) Support Marking.9) Documentation.10) GS-23-1 REVIVAL OF MONOPOD PLATFORM- Topside piping stress analysis.11) Preparation of Purchase Specifications.12) Preparation of Piping Stress Design Basis.13) Preparation of Pipe Support Standards.14) Piping GAD Checking, Isometric CheckingKey Skills Required:1. Familiarity with Autocad and proficiency in MS Office.2. Preparation of Study layout3. Awareness of Piping material specifications4. Awareness of Valve and specialty data sheets.5. Awareness of 3D modelling especially with CAESAR II & Autocad software.6. Understanding of equipment layouts,7. Prepare of Piping layouts and Isometrics

Sr. Electrical EngineerPosition: - Project Engineering Manager Job Responsibilities: Basic and detail electrical engineering for different types of ships Preparation of basic and detail engineering drawing for Marine/ Offshore applications Preparation of MTO for electrical and instrumentation system Preparation of electrical and instrument layout drawings 3D Model review for electrical System Perspective. Review of P & ID for Electrical & Instrumentation Part. Understanding Existing system & recommending System Upgradation with detailed drawings. Onsite inspection for Projects in Marine/ Offshore industry. Study of Short Circuit Calculation & Updating the calculation for retrofit. Liasing with Clients/ Class / Internal multi discipline teams for Design execution. Managing the Electrical team and Project planning responsible for all electrical Project deliverables. Project Communication internal & external Preferred Experiences Design of All Ship System Basic & Detail Engineering Understanding Class, IMO & SOLAS regulations and implementation in design Experience in Load flow Analysis. Experience in Short Circuit Calculation & Coordination study for Ship Power System. Experience in Preparation of Power SLDs & power Distribution System Experience in Preparation of Control Circuit Diagram from Client documents Understanding and Preparation of Ships safety systems like Fire detection, Gas sampling etc. Understanding of Cable Selection & Breaker Selection Understanding Relays, Starter Panel & Sequential Logic circuit Experience in Liasing with Class & Clients Basic Understanding of PLC & Programming Experience in BWTS & Scrubber Design (Electrical Part) is proffered. Shall be able to read and understand electrical Circuit diagrams, SLD etc. and related calculation. Positive working attitude, willing to learn, ability to cohesively work as a team and take up new skill sets. Able to work independently & in Team

Job Title : Civil EngineerExperience 10-15 yearsMin Age - 39Job Overview - Job Will Involve Total Handling of Site Including Site Checking, Reporting, Maintaining Records, Coordination Etc.Education/ Formal Qualification - BE / B Tech / DIPLOMASkills (Technical / Computer / Soft skills etc.)- Must have computer skills excel, word etc.- Must have construction management and project management skillKnowledge and Experience - (Total work experience and job related relevant experience)- Excellent Communication Skill- Site Execution, Mall project executions - Retail project execution, Finishing workResponsibilities Plan the work front and give clear instructions to the civil team and ensure timelines and deadlines are met To control and monitor the preventive maintenance carried out as per schedule. To take care of the civil maintenance as well as finishing work, both internal and external to the buildings Preparation of BOM for civil work.. Drive the team to achieve superior quality, minimize wastage and timely delivery Coordinate with various consultants such as architects, structure consultants, other consultants to understand the drawings and guide the team accordingly Prepare estimate of entire quantities for finalizing schedule of paymentWorking conditions Daily reporting: Reporting to the management regarding of ENG module DPR reports and Reporting of material module at weekly basis likewise Stock summery, issue reports & GRN register. Working Condition : Monday to Saturday, Weekends Off Location : Kalyan Preference : Male

Sr. mechanical EngineersBachelor or Diploma degree with a specialization in the mechanical all type of fabrication work and can present a working experience of at least 5 years. Good communication and interpersonal skills.Knowledge and experience in the oil and gas industry are an advantage. Job Responsibilities and Duties: Analyze root causes for all fabrication issues and resolve same and implement new process tools according to required order. Coordinate with technicians and provide support to various teams and maintain the quality of the work processes in systems. Manage all communication with supervisors and ensure the efficiency of the fabrication process and resolve issues for processes. Design various ideas for pressure vessels, heat exchangers etc and prepare detailed drawings for all fabrication processes. Prepare estimates and quotes for supply materials and assist to fabricate and weld the products. Plan materials for new products and ensure optimal utilization of the resources and administer product orders and ensure compliance with the timeframe for the various fabricated products. Coordinate with the engineering team and prepare products. Assist the production manager and prepare reports on a regular basis after final inspections. Manage and reconcile work orders with help of vendors and prepare required drawings and evaluate welding joints. Maintain quality for fabrication from conceptualization to implementation and perform an inspection for welding, painting and sandblast. Collaborate with the work team and assist in the delivery of projects. Review of WPS & PQR & Welder Qualification prior to welding. Verification of Raw Materials plates, pipes, fittings, structural sections and review of Test Certificates. Structural Fabrication NDT Level II in RT, UT, PT, MT.

Designation: Relay Engineerexperience: 3 Years Experience in [oil & Gas Preffered]qualification: (be/b.tech/diploma -electrical/instrumental/automation)responsibilities: relevant Experience in Testing, Commissioning & Programming of Numerical and Electromechanical Relays & Knowledge of Relay Coordination (any Make and Type). proficient in Using Relay Testing Kits like Omicron or Eqv. extensive Experience in Testing Critical Relays such as (mp) Motor Protection, (fp)feeder Protection, Transformer & Its (dp)differential Protection, (gp)generator Protection and Distance Protection. Capable of Independently Handling and Leading Site Operations, Troubleshooting Relay Problems, and Preparing/modifying Logic, Retrofitting.requirements:only Suitable Candidates with Relevant Experience Should Apply.note: Please Ensure that Your Resume Clearly Demonstrates the Required Experience and Skills Mentioned Above.job Type: Full-time

Job Description:Major responsibilities involve to plan and conduct work in team, apply good engineeringpractices and techniques, prepare or modify drawings, specifications, calculations,reports. Assist the project team in managing the design, engineering, procurement &contractors for the ongoing projects and to monitor work for compliance to applicablecodes, accepted engineering practices and client standards.Position requires experience in process design, working knowledge of relevant industry,good understanding of various unit operations and exposure to the project environment.Project engineers will contribute in various stages of the project and will have overallresponsibility for design, documentation, installation and commissioning.Roles and Responsibilities:Conceptual design, Electrical system design involvingMV / LV Panels / Relays testing, retrofitting/ Distribution Board / AMPF / Capacitor Bank / Transformer/ Cables/ BusDucts / Generator / Auto Synchronization panels / Lightning protector / Earthing SystemPreparation of feeder list and SLDsCable sizing, Cable routing and terminationSelection of electrical components and systemPrepare equipment specifications, data sheets, and bid evaluations.Prepare User Requirement Specifications (URS).Supervise onsite installation .Manage Subcontractors on site and conduct quality checksAssist project managers to complete relevant project tasks.Qualification:Electrical engineering graduate or Diploma holder with 6-8 years of experience in therequired industry and good communications skills.ORCandidate with practical knowledge and good working experience in the relevant industryand good communications skillsPreference:Position requires experience in process design, working knowledge of the beverageand healthcare industry and good understanding of project management.Experience working MS Project , AutoCADUnderstanding of project management techniques and procedures involved.