Quality Manager Graduate Experience Jobs in Nashik

Key Responsibilities1. Quality Strategy & Systems ManagementEstablish & Maintain QMS: Develop, implement, and upgrade the Quality Management System (QMS) in alignment with international standards (such as ISO 9001, IATF 16949 for automotive, or ISO 13485 for medical devices, depending on the industry).Audit Readiness: Lead internal and external quality audits, serve as the primary point of contact for regulatory bodies, and ensure swift closure of any non-compliance findings.Standard Operating Procedures (SOPs): Review, approve, and enforce SOPs across the receiving, in-process, and final inspection stages.2. Operations & ControlDefect Prevention: Implement advanced quality tools like FMEA (Failure Mode and Effects Analysis), SPC (Statistical Process Control), and MSA (Measurement Systems Analysis) to predict and prevent defects.Root Cause Analysis: Lead complex investigations into product failures or customer complaints using 8D, 5-Why, and Fishbone (Ishikawa) methodologies to implement permanent corrective actions (CAPA).Vendor Quality Management: Collaborate with the procurement team to evaluate supplier quality, establish incoming material standards, and conduct supplier audits.3. Continuous Improvement & MetricsKPI Tracking: Monitor and report on key quality metrics, including COPQ (Cost of Poor Quality), PPM (Parts Per Million) defect rates, FTR (First Time Right), and customer return rates.Lean Practices: Drive continuous improvement initiatives using Lean Six Sigma methodologies to eliminate waste and optimize process efficiency.4. Leadership & Team ManagementTeam Development: Lead, mentor, and build the capability of the quality engineering and inspection teams (QA/QC Engineers, Programmers, Inspectors).Culture Shift: Foster a plant-wide Quality First mindset by training production operators and floor staff on quality standards.

JD - Sr. Manager/ Chief ManagerLocation: Gonde, NashikExperience: 12-15 Years of experience in similar type of industry, Pharmaceutical or Perfume glass Bottle Manufacturing industryQualification: B.E/ B.Tech, Graduate from science background with MBA from reputed university.Role & Responsibilities Review performance against operating plans and approve necessary improvements or corrective actions. Production Planning, Scheduling &Control. Oversee the entire production cycle, from raw material management to finished goods. Enhance in the targeted percentage of glass-to-glass yield & OEE over the last year. Minimize the Production losses, monitor yield, Improvement projects and ensure adherence to established production stan monitor Sops, and best practices. Review and approve departmental budgets, ensuring effective control of spending. Optimize labor, material utilization, and engineering efficiency. Ensure availability and maintenance of required production resources and equipment. Develop, implement, and maintain reporting systems related to production performance and metrics. Provide timely and accurate reports on production activities, deviations, and achievements. Ensure strict compliance with GMP, safety regulations, and good housekeeping standards. Monitor adherence to all company policies, procedures, and regulatory requirements. Drive a safety-focused culture across the production team. Improve product quality and quantity within planned schedule while maintaining cost. Define duties, responsibilities, and accountability for all direct subordinatesMaintain effective communication within the department and with cross-functional stakeholders. Support the implementation of manufacturing and organizational plans aligned with the Operations Master Plan. Collaborate effectively with internal managers and external stakeholders to meet production goals. Lead continuous improvement initiatives to enhance productivity, reduce waste, and improve operational efficiency Perform additional duties as assigned with flexibility and willingness.Important Competencies Production Planning Execution Implementation of TPM & GMP lean manufacturing implementation by using of TPM Kaizen 5S Project ManagementKey Skills Strategic Production Planning SAP- S 4 HANA Team Management Proficient in Excel Time Management & analytical skillsProcess Knowledge

Recruitment of new candidates as per the requirements, Follow up on documentation of new candidates before joining and inform to HR team on priorityVerification of newly hired employeeMaintain discipline in office as well as on the field processProvide Guidance/Training of COC, Company Policies, Guidelines to team members for development in their official skills and knowledgeDiscuss Monthly performance evaluation and review of the teamProper Communication/Coordination with executive, team leader, telecaller and Back office departmentDiscuss about the allocation with respective product managerDiscuss with team about last month PTPs and Flows casesTake regular feedback from telecaller and executives for targetsField Visits with FOS in problematic casesAsk for KYC of Shifted and address not found cases to the managersDiscuss about Targets and Milestone of every month with the teamTake follow up of dedupe reports & ID Card from respective Bank Managers

Hiring for 1 Quality Manager Job in Nashik with minimum 8 Years Experience,Required Educational Qualification is : B.Pharma with Good knowledge in Quality Control,Quality Management etc.

Production Planning and controlling, Control Inventory Calculate and Improvise OEE, ROTA and VAPCO Manage daily operations in our plant facility and Improve Skill Matrix . Ensure safety and efficiency of the facility Analyze and issue production and performance reports Test and monitor plant processes Customer complaints handling Maintain all administrative records Control costs to achieve company budget goals Develop and implement a comprehensive preventative maintenance program Create annual budget Minimize rejection and rework Overall improvement and development of production department

The candidate should be from Rubber & Plastic background . should know Production , Planning QA , Plant Maint , Improvement ,activities , Budgeting , Finance , MIS, General Administration , Union Mgmt , Agreements etc

Key ResponsibilitiesOperational Leadership & Production Target Mastery:Direct and manage daily plant operations for production, quality control, maintenance, and shipping/receiving.Plan and execute production schedules to ensure timely delivery to clients while optimizing resource utilization.Monitor operation expenses and research ways to reduce costs while maintaining or improving product quality.Process Optimization & Lean Manufacturing:Implement and champion continuous improvement strategies (such as Lean Manufacturing, Six Sigma, 5S, and Kaizen) to reduce waste and eliminate bottlenecks.Analyze workforce utilization, equipment downtime, and material scrap trends to increase Overall Equipment Effectiveness (OEE).Quality Assurance & Maintenance:Collaborate with the Quality department to ensure all finished products strictly comply with company and customer standards.Oversee preventive and breakdown maintenance schedules for plant machinery to minimize production disruptions.Compliance, Safety & Industrial Relations:Ensure the facility operates in strict compliance with all local statutory laws (Factory Act, pollution control norms, labor laws, and industrial safety regulations).Maintain a safe and clean working environment, driving a Zero Accident culture on the shop floor.Manage labor and industrial relations smoothly, resolving grievances and fostering high workforce morale.Budgeting & Reporting:Prepare, manage, and present annual operational budgets, Capital Expenditure (CAPEX) requirements, and monthly MIS reports to executive leadership.

Job Title:HOD - Quality Assurance (QA) & Management Representative (MR)Job Summary:The Head of Department - Quality Assurance & Management Representative is responsible for establishing, implementing, maintaining, and continually improving the organisations Quality Management System (QMS) in line with applicable standards such as ISO 9001 / IATF / ISO 14001 / ISO 45001 (as applicable). The role ensures compliance with statutory, customer, and regulatory requirements while acting as the key liaison between top management, certification bodies, customers, and internal departments on quality matters.Key Responsibilities:Quality Assurance (HOD - QA):Lead and manage the Quality Assurance department and quality personnel.Develop, implement, and monitor quality policies, objectives, SOPs, and work instructions.Ensure compliance with customer specifications, statutory requirements, and industry standards.Review and approve quality plans, inspection procedures, and control plans.Monitor product quality, analyse nonconformities, and drive root cause analysis (RCA) and corrective & preventive actions (CAPA).Handle customer complaints, quality audits, and qualityrelated communications.Ensure effective calibration, inspection, testing, and quality records management.Drive continuous improvement initiatives such as Kaizen, 5S, Lean, Six Sigma (if applicable).Management Representative (MR):Act as the Management Representative as per applicable ISO standards.Ensure the QMS conforms to standard requirements and is effectively implemented.Report QMS performance, audit results, risks, and improvement opportunities to Top Management.Plan, conduct, and close internal audits and coordinate external / certification audits.Ensure timely management review meetings and followup of action points.Promote awareness of customer requirements and quality culture across the organisation.Coordinate with certification bodies, regulatory authorities, and customers for audits and inspections.Required Qualifications:Bachelors degree in Engineering / Science or relevant discipline.Formal training in ISO 9001 (Lead Auditor preferred).Strong knowledge of Quality Management Systems and documentation control.Experience:8-15 years of experience in Quality Assurance / Quality Management.Minimum 3-5 years in a leadership or HOD role.Handson experience in handling internal and external audits.Key Skills & Competencies:Strong leadership and people management skills.Excellent knowledge of QMS standards and compliance requirements.Analytical and problemsolving skills.Effective communication and coordination abilities.Documentation, reporting, and audit management expertise.Customerfocused and continuous improvement mindset.Preferred (Optional):Experience in manufacturing / pharma / engineering industry.Knowledge of additional standards such as ISO 14001, ISO 45001, IATF 16949, GMP.Six Sigma Green/Black Belt certification.Reporting To:Top Management / Plant Head / Director

Key Responsibilities1. Plant Operations ManagementOversee end-to-end manufacturing operations and ensure smooth production processesPlan, organize, and manage production schedules to meet business demandsEnsure optimal utilization of manpower, machinery, and materials2. Production & EfficiencyMonitor production performance and implement improvements for efficiency and cost reductionMinimize downtime and ensure preventive maintenance of equipmentTrack KPIs such as output, waste reduction, and productivity3. Quality AssuranceEnsure adherence to quality standards and regulatory requirementsImplement quality control processes and monitor product qualityAddress and resolve production or quality issues promptly4. Health, Safety & ComplianceEnsure strict compliance with health, safety, and environmental regulationsPromote a safety-first culture and conduct safety auditsImplement policies to reduce workplace hazards and incidents5. Team Leadership & DevelopmentLead, motivate, and manage plant staff including supervisors and workersConduct training and performance evaluationsFoster a positive and productive work environment6. Budget & Cost ManagementPrepare and manage the plant budgetControl operational expenses and optimize production costsIdentify areas for cost savings and efficiency improvements7. Inventory & Supply Chain CoordinationOversee inventory management of raw materials and finished goodsCoordinate with procurement and logistics teamsEnsure timely availability of materials for production8. Continuous ImprovementDrive lean manufacturing, Six Sigma, or Kaizen initiativesImplement process improvements and innovation strategiesAnalyze performance data and recommend enhancementsKey Performance Indicators (KPIs)Production output and efficiency levelsCost per unit and budget adherenceProduct quality and defect ratesSafety compliance and incident ratesDowntime reduction and equipment effectiveness (OEE)