362

Maintenance Engineer Job Vacancies in Maharashtra

Filters

  • 0 - 6 yrs
  • 30.0 Lac/Yr
  • Mumbai
Aircraft Maintenance Engineer Aircraft Engineer Aircraft Maintenance Technician Aircraft Mechanic Aircraft Technician Aircraft Maintenance Aviation Aviation Trainer Avionics Avionics Technician Avionics Engineer Aerospace Engineer Aerospace Engineering Aeronautics Aeronautical Engineer Aeronautical Engineering
Job SummaryAn Aircraft Maintenance Engineer (AME) is responsible for inspecting, maintaining, repairing, troubleshooting, and certifying aircraft to ensure they are safe, airworthy, and compliant with aviation regulations. The role involves carrying out scheduled and unscheduled maintenance on aircraft systems, engines, avionics, electrical components, hydraulic systems, landing gear, and structural components while adhering to the standards established by aviation authorities.Key ResponsibilitiesAircraft Inspection & MaintenancePerform routine, preventive, scheduled, and unscheduled aircraft maintenance.Conduct daily, transit, weekly, A-check, B-check, C-check, and heavy maintenance inspections.Inspect aircraft structures, fuselage, wings, landing gear, flight controls, and engines.Diagnose and rectify aircraft defects using approved maintenance procedures.Replace, repair, and overhaul defective aircraft components.Ensure all maintenance tasks are completed according to the Aircraft Maintenance Manual (AMM).Troubleshooting & RepairsIdentify mechanical, hydraulic, electrical, pneumatic, and avionics faults.Use specialized diagnostic tools and testing equipment.Repair aircraft systems while maintaining manufacturer specifications.Coordinate with engineering teams for complex technical issues.Perform functional tests after repairs to verify serviceability.Engine & Component MaintenanceInspect aircraft engines for wear, leaks, corrosion, and damage.Perform engine servicing, oil changes, filter replacement, and component inspections.Maintain propellers, Auxiliary Power Units (APU), and fuel systems.Monitor engine performance and recommend corrective actions.Avionics & Electrical SystemsInspect communication and navigation systems.Maintain radar, autopilot, cockpit instrumentation, and electrical wiring.Test aircraft electronic systems for operational reliability.Ensure compliance with avionics maintenance procedures.Documentation & ComplianceComplete maintenance logs, inspection reports, and defect records.Maintain aircraft technical documentation accurately.Ensure compliance with aviation regulatory authorities.Certify aircraft for return to service after maintenance (where appropriately licensed).Follow company maintenance policies and quality assurance procedures.Safety & Quality AssuranceFollow all aviation safety regulations and standard operating procedures.Maintain clean and organized work areas.Ensure proper use of Personal Protective Equipment (PPE).Report safety hazards and technical discrepancies immediately.Participate in safety audits and quality inspections.Team CoordinationWork closely with pilots, technicians, quality inspectors, and operations staff.Coordinate maintenance schedules with flight operations.Assist junior technicians with technical guidance and training.Participate in emergency aircraft recovery and AOG (Aircraft on Ground) support.Required QualificationsDiploma or Bachelor's Degree in Aircraft Maintenance Engineering, Aeronautical Engineering, Mechanical Engineering, or Aerospace Engineering.DGCA-approved AME qualification or equivalent aviation authority certification is preferred.Valid Aircraft Maintenance Engineer License (where applicable).Type rating on specific aircraft is an advantage.Relevant experience in aircraft maintenance is preferred.Required SkillsStrong knowledge of aircraft systems and maintenance procedures.Excellent troubleshooting and fault diagnosis skills.Knowledge of aviation regulations and airworthiness standards.Ability to interpret aircraft maintenance manuals and engineering drawings.Strong analytical and problem-solving abilities.Excellent attention to detail.Good communication and teamwork skills.Ability to work under pressure and meet strict deadlines.Computer proficiency in maintenance management software.Good technical documentation skills.Technical KnowledgeAircraft StructuresGas Turbine EnginesHydraulic SystemsPneumatic SystemsElectrical SystemsAvionics SystemsFlight Control SystemsLanding Gear SystemsFuel SystemsAircraft DocumentationMaintenance PlanningAircraft Safety StandardsPreferred CertificationsDGCA Aircraft Maintenance Engineer LicenseEASA Part-66 License (preferred internationally)ICAO-compliant aviation trainingHuman Factors TrainingSafety Management System (SMS) TrainingFuel Tank Safety TrainingEWIS (Electrical Wiring Interconnection System) TrainingAircraft Type Rating CertificationWorking ConditionsAirport hangars, maintenance bases, and line maintenance stations.Rotational shifts including nights, weekends, and public holidays.Outdoor work in varying weather conditions.Physically demanding work involving standing, climbing, bending, and lifting equipment.Exposure to aircraft noise, fuels, lubricants, and hydraulic fluids while following strict safety procedures.Salary Range (India)Fresher: 3.5 - 6 LPA2-5 Years: 6 - 10 LPA5-10 Years: 10 - 18 LPALicensed/Type-Rated AME: 15 - 30+ LPA (depending on airline, aircraft type, and experience)
View all details
  • 1 - 3 yrs
  • 3.5 Lac/Yr
  • Bhosari Pune
Technician Activities Machine Maintenance Utility Maintenance Service Engineer Diploma Engineer
Job Profile & Key Responsibilities:-A Service Engineer at Calitron Calibration Laboratory (OPC) Pvt. Ltd. is responsible for the installation, maintenance, testing, and field or lab calibration of electrical, electronics, mechanical, thermal, and flow instrumentation. On-Site & In-Lab Service: Handle both internal lab duties in Bhosari, Pune, and field-based service visits to customer sites for equipment inspection and maintenance (travel within city/country as required). Installation & Troubleshooting: Install, diagnose, and troubleshoot industrial test and measurement equipment. Documentation & Compliance: Maintain calibration certificates, service reports, logbooks, and trace measurement data accurately to ensure regulatory compliance. Customer Support: Coordinate with clients for equipment servicing, technical queries, and turnaround support.
View all details
  • 3 - 8 yrs
  • 4.0 Lac/Yr
  • Turbhe Midc Navi Mumbai
Predictive and Breakdown Maintenance. Engineer Vendor Development Coordinate With Production QA-quality Assurance
Urgent OpeningMaintenance Engineer(Procurement of Pharmaceuticals- (In a Pharmaceutical Company)Turbhe, Navi MumbaiOffice Timing: 9:30 AM to 6 PMWeekly Off: SundayQualification: Diploma / B.E. / B. Tech preferred, but qualification is not mandatoryfor candidates with strong relevant hands-on experienceExperience: 3-8 years in pharmaceutical manufacturing/production equipment maintenanceA hands-on Maintenance Engineer / Technician with relevant pharmaceutical industryexperience who can independently handle AHU/HVAC systems and pharmaceutical production equipment, particularly RMG, Sifter, Multi Mill, Compression Machine, Coating Pan, FBD, etc.Key ResponsibilitiesHandle day-to-day maintenance of pharmaceutical manufacturing and production equipment.Carry out preventive, predictive and breakdown maintenance.Troubleshoot mechanical, electrical, pneumatic and hydraulic issues.Minimise equipment downtime and ensure timely breakdown resolution.Maintain preventive maintenance schedules and equipment history.Coordinate with Production, QA and other departments.Ensure maintenance activities comply with GMP, SOP and safety requirements.Handle equipment installation, commissioning, qualification and modification activities.Coordinate with external vendors and service engineers.& Motors/Air Compressors/Compressed Air Systems/Boilers / Steam SystemsOther pharmaceutical plant utilities
View all details
  • 0 - 6 yrs
  • 25.0 Lac/Yr
  • Pune
Aircraft Maintenance Aircraft Maintenance Engineer Aircraft Engineer Aircraft Mechanic Aircraft Technician Aircraft Maintenance Technician Aircraft Handling Aircraft Handling Staff Aircraft Servicing Aviation Aviation Trainer Avionics Avionics Technician Avionics Engineer
Job TitleAircraft Maintenance Engineer (AME)DepartmentAircraft Maintenance / EngineeringLocationsPuneMumbaiNagpurNashikShirdiGoaAmravatiAurangabadKolhapurNavi MumbaiSolapurJob SummaryAn Aircraft Maintenance Engineer (AME) is responsible for inspecting, maintaining, repairing, troubleshooting, and certifying aircraft to ensure they are safe, airworthy, and compliant with aviation regulations. The role involves carrying out scheduled and unscheduled maintenance on aircraft systems, engines, avionics, electrical components, hydraulic systems, landing gear, and structural components while adhering to the standards established by aviation authorities.Key ResponsibilitiesAircraft Inspection & MaintenancePerform routine, preventive, scheduled, and unscheduled aircraft maintenance.Conduct daily, transit, weekly, A-check, B-check, C-check, and heavy maintenance inspections.Inspect aircraft structures, fuselage, wings, landing gear, flight controls, and engines.Diagnose and rectify aircraft defects using approved maintenance procedures.Replace, repair, and overhaul defective aircraft components.Ensure all maintenance tasks are completed according to the Aircraft Maintenance Manual (AMM).Troubleshooting & RepairsIdentify mechanical, hydraulic, electrical, pneumatic, and avionics faults.Use specialized diagnostic tools and testing equipment.Repair aircraft systems while maintaining manufacturer specifications.Coordinate with engineering teams for complex technical issues.Perform functional tests after repairs to verify serviceability.Engine & Component MaintenanceInspect aircraft engines for wear, leaks, corrosion, and damage.Perform engine servicing, oil changes, filter replacement, and component inspections.Maintain propellers, Auxiliary Power Units (APU), and fuel systems.Monitor engine performance and recommend corrective actions.Avionics & Electrical SystemsInspect communication and navigation systems.Maintain radar, autopilot, cockpit instrumentation, and electrical wiring.Test aircraft electronic systems for operational reliability.Ensure compliance with avionics maintenance procedures.Documentation & ComplianceComplete maintenance logs, inspection reports, and defect records.Maintain aircraft technical documentation accurately.Ensure compliance with aviation regulatory authorities.Certify aircraft for return to service after maintenance (where appropriately licensed).Follow company maintenance policies and quality assurance procedures.Safety & Quality AssuranceFollow all aviation safety regulations and standard operating procedures.Maintain clean and organized work areas.Ensure proper use of Personal Protective Equipment (PPE).Report safety hazards and technical discrepancies immediately.Participate in safety audits and quality inspections.Team CoordinationWork closely with pilots, technicians, quality inspectors, and operations staff.Coordinate maintenance schedules with flight operations.Assist junior technicians with technical guidance and training.Participate in emergency aircraft recovery and AOG (Aircraft on Ground) support.Required QualificationsDiploma or Bachelor's Degree in Aircraft Maintenance Engineering, Aeronautical Engineering, Mechanical Engineering, or Aerospace Engineering.DGCA-approved AME qualification or equivalent aviation authority certification is preferred.Valid Aircraft Maintenance Engineer License (where applicable).Type rating on specific aircraft is an advantage.Relevant experience in aircraft maintenance is preferred.Required SkillsStrong knowledge of aircraft systems and maintenance procedures.Excellent troubleshooting and fault diagnosis skills.Knowledge of aviation regulations and airworthiness standards.Ability to interpret aircraft maintenance manuals and engineering drawings.Strong analytical and problem-solving abilities.Excellent attention to detail.Good communication and teamwork skills.Ability to work under pressure and meet strict deadlines.Computer proficiency in maintenance management software.Good technical documentation skills.Technical KnowledgeAircraft StructuresGas Turbine EnginesHydraulic SystemsPneumatic SystemsElectrical SystemsAvionics SystemsFlight Control SystemsLanding Gear SystemsFuel SystemsAircraft DocumentationMaintenance PlanningAircraft Safety StandardsPreferred CertificationsDGCA Aircraft Maintenance Engineer LicenseEASA Part-66 License (preferred internationally)ICAO-compliant aviation trainingHuman Factors TrainingSafety Management System (SMS) TrainingFuel Tank Safety TrainingEWIS (Electrical Wiring Interconnection System) TrainingAircraft Type Rating CertificationWorking ConditionsAirport hangars, maintenance bases, and line maintenance stations.Rotational shifts including nights, weekends, and public holidays.Outdoor work in varying weather conditions.Physically demanding work involving standing, climbing, bending, and lifting equipment.Exposure to aircraft noise, fuels, lubricants, and hydraulic fluids while following strict safety procedures.Salary Range (India)Fresher: 3.5 - 6 LPA2-5 Years: 6 - 10 LPA5-10 Years: 10 - 18 LPALicensed/Type-Rated AME: 15 - 30+ LPA (depending on airline, aircraft type, and experience)
View all details

Get Personalized Job Matches

Based on your experience, skills, interests, and career goals to help you find the most relevant opportunities faster. Register Now!
  • 0 - 1 yrs
  • 2.5 Lac/Yr
  • Lonavala Pune
Basic Welding Safety Procedures Problem-solving Troubleshooting Quality Control Preventive Maintenance Time Management Blueprint Reading Electrical Knowledge Team Collaboration Technical Aptitude Equipment Maintenance Hand Tool Proficiency Mechanical Skills Adaptability Communication Skills Computer Literacy Attention to Detail Analytical Skills Documentation Skills
1. Job PurposeResponsible for ensuring maximum availability and reliability of plant machinery, furnaces, electrical systems, utilities and other production equipment through preventive, predictive and breakdown maintenance.2. Key ResponsibilitiesMechanical Maintenance Maintenance of aluminium melting furnaces, holding furnaces and associated equipment. Maintenance of pumps, motors, gearboxes, conveyors, compressors, hydraulic and pneumatic systems. Handle breakdown maintenance and ensure minimum production downtime. Conduct preventive maintenance as per defined schedules. Identify recurring failures and implement permanent corrective actions. Maintain critical spare parts and recommend spares for procurement.Electrical Maintenance Maintenance of HT/LT electrical systems, MCC/PCC panels, control panels and distribution systems. Maintenance of motors, starters, VFDs, sensors and electrical control systems. Ensure proper functioning of DG sets, transformers and power distribution systems. Troubleshoot electrical breakdowns safely and quickly. Ensure electrical safety, earthing and compliance with applicable standards.Furnace & Process Equipment Ensure reliable operation of melting and alloy production equipment. Monitor furnace-related mechanical/electrical equipment. Coordinate with production during furnace breakdowns and shutdowns. Monitor critical parameters and identify early signs of equipment failure.Preventive Maintenance Prepare and execute daily, weekly, monthly and annual PM schedules. Maintain equipment history and breakdown records. Track MTBF, MTTR and machine availability. Analyse repeated breakdowns and implement RCA/CAPA.Utilities Maintenance of compressors, cooling-water systems, pumps, ventilation systems and other plant utilities. Monitor utility equipment performance and energy consumption.Safety & Compliance Follow LOTO and all plant safety procedures. Ensure maintenance work is carried out with proper PPE and safety permits. Ensure electrical and mechanical equipment are maintained in safe operating condition. Support statutory inspections and safety audits.3. QualificationEssential: Diploma / B.E. / B.Tech in Mechanical or Electrical Engineering. ITI with strong industrial maintenance experience may also be considered for Technician/Senior Technician positions.4. Required Skills Strong breakdown troubleshooting capability. Knowledge of preventive and predictive maintenance. Knowledge of PLC/VFD and industrial electrical systems. Knowledge of hydraulic and pneumatic systems. Ability to read electrical/mechanical drawings. Good knowledge of MS Excel and maintenance documentation. Strong team-handling and vendor-management skills. Ability to work in shifts and during emergency breakdowns.5. Preferred Candidate ProfilePriority should be given to candidates from:1. Aluminium alloy / aluminium recycling plants2. Foundry / melting plants3. Die-casting industries4. Automotive component manufacturing5. Steel / non-ferrous metal plants6. Heavy engineering manufacturing
View all details
  • 0 - 2 yrs
  • 3.0 Lac/Yr
  • Nashik
CATIA Autocad Mechanical Design Mechanical Designer Mechanical Maintenance Drafting Drawing AutoCAD Mechanical Plastic Product Design Sheet Metal Design
Key ResponsibilitiesProduct Design & Development: Conceptualize, design, and detail mechanical parts, mechanisms, and assemblies using 3D CAD software (e.g., SolidWorks, Creo, CATIA, or AutoCAD).Prototyping & Testing: Build functional prototypes, define test plans, and conduct rigorous validation and durability testing to ensure designs meet performance, safety, and reliability standards.Engineering Analysis: Perform structural, thermal, and kinematic analyses (using hand calculations or FEA/CFD simulation tools) to optimize designs for weight, strength, and cost.Design for Manufacturing (DFM/DFA): Collaborate with manufacturing partners and suppliers to ensure designs are optimized for mass production, assembly efficiency, and cost reduction.Documentation: Create and maintain comprehensive engineering documentation, including 2D manufacturing drawings, Bill of Materials (BOMs), assembly instructions, and Engineering Change Orders (ECOs).Cross-Functional Collaboration: Work alongside electrical, firmware, quality assurance, and project management teams to resolve technical challenges throughout the product lifecycle.
View all details
  • 0 - 6 yrs
  • 15.0 Lac/Yr
  • Mumbai
Aircraft Maintenance Aircraft Engineer Aircraft Technician Aircraft Mechanic Aircraft Maintenance Engineer Aircraft Maintenance Technician Aircraft Maintenance Engineering Electrical Engineer Aerospace Engineer Aviation Trainer Avionics Technician Avionics Engineer
An Aircraft Maintenance Engineer (AME) is responsible for ensuring that aircraft are safe, airworthy, and ready for flight. They inspect, repair, maintain, and certify aircraft systems in compliance with aviation safety standards. Key ResponsibilitiesPerform routine inspections before and after flightsDiagnose and troubleshoot aircraft mechanical/electrical issuesRepair and replace faulty components (engines, hydraulics, avionics)Conduct scheduled maintenance checks (A, B, C, D checks)Maintain accurate maintenance logs and documentationEnsure compliance with aviation authorities like DGCACertify aircraft as airworthy for operationWork closely with pilots and ground staff Skills RequiredStrong knowledge of aircraft systems & engineering principlesAttention to detail and safety awarenessProblem-solving and troubleshooting skillsTechnical proficiency with tools and diagnostic equipmentTeamwork and communication skills Educational QualificationAME Course approved by DGCAOR Diploma/Degree in Aeronautical EngineeringLicensing is mandatory (Category B1/B2) Work EnvironmentAirports, hangars, maintenance basesShift-based work (including nights & weekends)Physically demanding and safety-critical role Salary (India Approx.)Fresher: 3 - 5 LPAExperienced: 6 - 15+ LPA
View all details
  • 1 - 6 yrs
  • 2.5 Lac/Yr
  • Goregaon West Mumbai Suburban
Medical Equipment After Sales Service Mechanical Work Experience Machine Maintenance
We are seeking a dedicated Service Engineer with 1 to 6 years of experience to join our team in Goregaon West, Mumbai. The ideal candidate will provide exceptional service and support, ensuring our systems function optimally.Key Responsibilities:1. Installation and Maintenance: Install, test, and maintain equipment to ensure it operates effectively. Troubleshoot any issues that arise to minimize downtime.2. Customer Support: Provide technical support and guidance to clients, addressing their concerns and assisting with equipment operation.3. Reporting: Document service activities and report any major issues to the management. This helps in tracking performance and improving service quality.4. Training: Train customers on equipment usage and best practices to enhance their experience and satisfaction.5. Collaboration: Work closely with other teams to ensure all customer needs are met efficiently. Good communication is vital in this role.Required Skills and Expectations:Candidates should have a background in I.T.I. and possess strong technical skills related to machinery or equipment. Good problem-solving abilities and attention to detail are essential. Familiarity with customer service practices will be important as the role involves constant interaction with clients. The candidate should be a male, comfortable working in a full-time office setting, and be willing to learn continuously to keep up with technological advancements in the industry. Time management and organizational skills are essential for meeting deadlines and maintaining productivity.
View all details
  • 1 - 7 yrs
  • Mumbai
Electrical Site Engineer Budget Management Electrical Maintenance Technical Detailing Project Management PLC Breakdown Maintenance Site Planning
Electrical Equipment Installation and MaintenanceSupervise and coordinate the installation, commissioning, maintenance, repair, and upkeep of various electrical equipment and installations used in Indian Railways.Possess working knowledge of different types of railway electrical systems, equipment, components, and associated accessories.Ensure proper functioning, operational reliability, and safety of all electrical installations and equipment.Identify electrical faults, troubleshoot technical issues, and ensure timely corrective and preventive maintenance.2. Inspection, Testing and Quality ControlConduct inspections and testing of electrical equipment at the time of installation, commissioning, and during regular usage.Ensure equipment performance, operational efficiency, and compliance with applicable railway standards and safety procedures.Maintain records of inspections, testing results, faults identified, repairs undertaken, and corrective actions.Monitor equipment condition and recommend repairs, replacements, or upgrades wherever necessary.3. Spares and Inventory ManagementManage the identification, procurement requirements, storage, and availability of electrical spares, consumables, tools, and accessories.Establish and maintain inventories for different categories of electrical equipment and spare parts.Conduct periodic physical stock verification and reconcile inventory records.Monitor stock levels, identify critical spares, and ensure timely replenishment to avoid equipment downtime.Maintain proper documentation of material movement, consumption, replacement, and stock balances.4. Annual Maintenance Contracts (AMC)Coordinate and monitor AMCs for various electrical equipment and installations.Ensure timely servicing, preventive maintenance, breakdown repairs, and scheduled inspections by AMC service providers.Track AMC validity, renewal dates, service schedules, pending complaints, and service-level commitments.Liaise with vendors and service agencies to ensure timely resolution of equipment-related issues.Verify service reports and ensure satisfactory completion of maintenance activities.5. Preventive and Breakdown MaintenanceDevelop and implement preventive maintenance schedules for electrical equipment and installations.Investigate recurring electrical faults and recommend suitable corrective and preventive measures.Minimise equipment downtime through systematic maintenance planning and timely intervention.Ensure proper maintenance records, equipment history logs, and service documentation are maintained.6. Team, Vendor and Coordination ManagementCoordinate with railway departments, technical teams, contractors, vendors, and maintenance agencies as required.Supervise technicians and maintenance personnel involved in electrical installation, repair, and upkeep activities.Follow up on pending maintenance issues, material requirements, equipment failures, and service requests.Prepare periodic maintenance reports and provide updates on equipment performance and operational issues.7. Safety and ComplianceEnsure adherence to applicable Indian Railways electrical safety standards, procedures, and technical specifications.Ensure appropriate safety precautions are followed during installation, inspection, testing, and maintenance activities.Maintain records of safety inspections, maintenance compliance, and equipment testing.Ensure that work is carried out by appropriately authorised personnel wherever required.Essential Skills and Competencies10-15 years of relevant experience working with Indian Railways electrical equipment and installations.Strong practical knowledge of electrical installation, maintenance, repair, testing, and troubleshooting.Experience in managing electrical equipment, spare parts, inventories, and maintenance documentation.Knowledge of AMC administration, vendor coordination, and preventive maintenance planning.Ability to identify technical problems and implement effective solutions.Good organisational, coordination, reporting, and team management skills.Familiarity with railway electrical safety procedures and applicable technical standards.Preferred Candidate ProfileCandidates with direct experience in Indian Railways projects, railway electrical maintenance, installations, or equipment management will be preferred.Experience handling multiple types of railway electrical equipment, associated spares, and maintenance requirements.A practical, hands-on professional capable of independently coordinating maintenance, inventory control, testing, and AMC-related activities
View all details
  • 3 - 5 yrs
  • 4.3 Lac/Yr
  • Mumbai
Field Technician Elevators Maintenance Engineer Installation Engineer
JOB DESCRIPTION :Execute the installation of new and modernized units applying the methods established by Schindler ensuring the achievement of performance targets.Perform all works according to Schindler standards, including quality and safety policies.Keep the supervisor informed regarding the progress of work, hours spent and any non-compliance.Stay in communication with the customer and the supervisor to ensure the satisfaction of the customer needs.REQUIREMENT :Experience : 3+ years of experience in end to end Installation (Elevator Industry preferred)Education: ITI or NCTVT Completed (Electrician, Fitter, Mechanical, Lift Mechanic)
View all details
  • 0 - 2 yrs
  • 5.0 Lac/Yr
  • Chakan Pune
Electrical Maintenance Engineer
We are hiring for the position of Electrical Engineer Freshers Well verse with Electrical Drawing (Electrical Reading).Should have knowledge of DG Set Operation.Must be able do the Control panel components assembly amp; testing.Able to do the In-house Machine Maintenance.Qualification- B.E- Electrical Job Location- Chakan Pune Contact Person- Deepak- 7757087059
View all details

Hiring Electrical Engineer For Pune

Vishwas Electric Services

  • 5 - 8 yrs
  • 7.0 Lac/Yr
  • Pune
Electrical Maintenance Engineer Electrical Safety & Safe Isolation Practices HT Panels Cable Laying
We are looking for an experienced Electrical Engineer to join our team in Pune, India. The successful candidate will address technical challenges, provide troubleshooting solutions, and manage project-related documentation.Key responsibilities include:- Addressing ongoing technical challenges: Troubleshoot issues effectively to ensure smooth project execution.- Preparing and obtaining approval for Technical Queries (TQ): Use SAPE to formalize and submit queries for project clarity and direction.- Preparing material take-out lists: Compile comprehensive lists of manpower and materials required to meet project specifications.The ideal candidate should have a degree in Electrical Engineering and 5 to 8 years of relevant work experience. Strong analytical and problem-solving skills are essential for addressing technical issues efficiently. Proficiency in using SAPE for document management and technical queries is required. The ability to work collaboratively with team members and communicate effectively is important.This is a full-time position, requiring office attendance in Pune. The role might involve fieldwork, though specifics of travel are not detailed. Candidates must be prepared to handle physical tasks as per project needs. The working schedule consists of standard office hours with weekends typically off.Join us to contribute to innovative electrical engineering projects while advancing your professional career.
View all details

Hiring For Tool Room Engineer-Nashik

Career Club Consultancy and Management Services

  • 3 - 5 yrs
  • 4.0 Lac/Yr
  • Ambad Nashik
Tool Room Technician Tool Room Engineer Tool & Die Maker Tool Maintenance
The Tool Room Engineer-Nashik is responsible for the design and manufacturing of press tools. Working from the office in Ambad, Nashik, you will apply your technical expertise to develop effective tooling solutions.Key responsibilities include:- Tool Design: Involve in designing press tools, ensuring they meet appropriate specifications and performance criteria.- Manufacturing Support: Collaborate with the production team for the effective manufacturing of tools, ensuring optimal functionality and quality.- Problem-Solving: Address design-related challenges that may arise during the production process, implementing appropriate solutions.- Documentation: Maintain accurate records of tooling designs and modifications, ensuring compliance with industry standards.The ideal candidate must possess a diploma in Tool Design and Manufacturing from NTTF, RTC, GTTC, or IGTR. A minimum of 2 years of experience in press tool design is essential. Essential skills and expectations include:- Proficiency in tool design software and related applications.- Strong analytical skills to identify and resolve design challenges.- Effective communication skills for collaboration with team members.- Attention to detail and a commitment to maintaining high-quality standards.This full-time role requires a male candidate who is comfortable working onsite. Please apply if you are ready to contribute to a dynamic team focused on innovative tool solutions.
View all details
  • 0 - 2 yrs
  • Mumbai
Technician Activities Machine Maintenance Preventive Maintenance Medical Equipment After Sales Service
We are seeking a Service Engineer to join our team in Mumbai. This role requires the individual to visit customer sites for service calls, ensuring customer satisfaction and operational efficiency.As a Service Engineer, your key responsibilities will include:1. Site Visits: Traveling to customer locations within Mumbai to provide on-site technical support and service for electrical, electronic, or refrigeration equipment.2. Troubleshooting: Diagnosing and resolving technical issues promptly to minimize downtime and meet customer needs effectively.3. Maintenance: Performing regular maintenance checks on equipment to ensure optimal performance and reliability.4. Customer Interaction: Communicating effectively with customers to understand their requirements and provide solutions tailored to their needs.The ideal candidate should have a degree from I.T.I. or a diploma in Electrical, Electronic, or Refrigeration fields. With 0-2 years of experience, you will gain valuable knowledge in the service domain. Male candidates are preferred for this position. We expect the candidate to possess strong problem-solving skills, effective communication abilities, and a willingness to travel for fieldwork. Additional requirements include a valid driving license and familiarity with basic technical tools. The role involves full-time office work with field visits.You will be required to have means of transportation and a mobile device for communication purposes. Travel within various locations in Mumbai is necessary for fulfilling customer service commitments.
View all details
  • 6 - 9 yrs
  • Pune
Industrial Automation Service Engineering PLC HMI VFD Servo SCADA Sensors Control Systems Electrical Troubleshooting Installation Commissioning Preventive Maintenance Field Service Customer Support
Service Engineer - Automation Industrial AutomationExperience: 6-9 YearsLocation: PuneHiring Company: Talent Zone ConsultantBrief JD:We are hiring a Service Engineer - Automation with strong experience in industrial automation equipment and control systems. The role involves installation, commissioning, troubleshooting, preventive maintenance and providing technical support to customers at site.Key Responsibilities:Install, commission and service automation systems.Troubleshoot PLC, HMI, VFD, servo and control system issues.Conduct preventive and corrective maintenance.Provide onsite technical support and resolve customer issues.Coordinate with engineering and project teams.Prepare service reports and technical documentation.Travel to customer sites as required.Relevant Skillset:Industrial Automation, Service Engineering, PLC, HMI, VFD, Servo, SCADA, Sensors, Control Systems, Electrical Troubleshooting, Installation, Commissioning, Preventive Maintenance, Field Service, Customer Support
View all details

Hiring For Maintenance Engineer

Baker Gauges Ind Pvt Ltd

  • 1 - 5 yrs
  • 3.5 Lac/Yr
  • Viman Nagar Pune
Mechanical Maintenance Machine Maintenance Technician Activities Breakdown Preventive Maintenance Electrical Maintenance Foreman Activities Electronics Maintenance Utility Maintenance
We are looking for a Maintenance Engineer to join our team in Viman Nagar, Pune. The ideal candidate will have 1 to 5 years of experience and hold a diploma in a relevant field. This role requires a male candidate and will involve working in the office.Key Responsibilities:1. Equipment Maintenance: Regularly inspect and maintain machinery and equipment to ensure they are operating efficiently. This will involve troubleshooting and repairing any faults.2. Preventive Maintenance: Implement a preventive maintenance schedule to minimize downtime. You will identify potential issues before they become serious problems, ensuring smooth operation.3. Documentation: Maintain accurate records of maintenance activities and repairs. This will help track maintenance history and assist in future planning.4. Collaboration: Work closely with other engineers and team members to enhance maintenance processes and share best practices. Effective communication is key to ensuring tasks are completed on time.5. Compliance: Ensure all maintenance work complies with safety standards and regulations. This is crucial for maintaining a safe workplace.Required Skills and Expectations:Candidates should have a solid understanding of mechanical and electrical systems. Strong problem-solving skills are necessary to diagnose and fix issues quickly. Good communication skills are important for teamwork. Candidates should be detail-oriented and organized, capable of managing multiple tasks in a fast-paced environment. A proactive attitude toward learning and adapting to new technologies is also expected.
View all details

Electrical Engineer Fresher

Vijaya Management Services

  • Fresher
  • 4.0 Lac/Yr
  • Chakan Pune
Electrical Maintenance Breakdown Maintenance
We are looking for a dedicated Electrical Engineer to join our team in Chakan. This is a full-time position ideal for fresh graduates holding a Bachelor's degree in Engineering. - Design Electrical Systems: You will create electrical designs for various projects, ensuring they meet safety and efficiency standards.- Conduct Testing: You will conduct tests on electrical systems and components to verify their performance and functionality.- Troubleshoot Issues: When problems arise, you will analyze and resolve electrical faults in systems, making recommendations for improvements when necessary.- Collaborate with Teams: You will work closely with other engineers and project teams to ensure successful project execution and adherence to timelines.- Document Processes: You will maintain clear and detailed documentation of electrical designs, test results, and system specifications for future reference.To succeed in this role, candidates should have strong problem-solving skills and the ability to analyze complex systems. A good understanding of electrical principles and technologies is essential. Attention to detail is crucial to ensure safety and quality standards are met. Communication skills are also important for collaborating with colleagues and presenting technical information clearly. Candidates should be willing to work in an office environment and contribute positively to team goals. As a fresh graduate, a proactive approach to learning and growing in the position will be highly valued.
View all details

Electrical Site Engineer - Mumbai

The Supreme Consultancy

  • 1 - 3 yrs
  • Mumbai
Autocad Electrical Maintenance Electrical Installation Testing Commissioning Engineer Electrical Drawing Site Supervision MEP Coordinator Troubleshooting Cable Laying Electrical Safety Panel Testing Contractor
We are looking for an Electrical Site Engineer to join our team in Mumbai. The ideal candidate should have 1 to 3 years of experience and an education background in I.T.I. or Diploma in Electrical Engineering.Key Responsibilities:- Site Supervision: Oversee electrical installation and construction activities on-site to ensure compliance with design specifications and safety standards.- Project Coordination: Collaborate with other engineers and contractors to ensure smooth operations and timely completion of electrical works.- Quality Control: Conduct regular inspections of electrical systems and components to maintain high-quality standards and identify potential issues early.- Documentation Management: Maintain accurate records of project drawings, design changes, and site progress reports for project tracking and compliance purposes.- Troubleshooting: Identify electrical issues and provide effective solutions or corrective measures to keep the project on schedule.- Safety Compliance: Ensure that all electrical work adheres to safety regulations and best practices to protect personnel and equipment.Required Skills and Expectations:- Strong understanding of electrical systems, installation techniques, and safety standards.- Proficient in using electrical design software and tools.- Good communication skills for effective collaboration with team members and stakeholders.- Ability to read and interpret electrical blueprints, schematics, and technical documents.- Detail-oriented approach with problem-solving skills to address challenges on-site.- Willingness to work in a dynamic environment and manage multiple tasks efficiently.
View all details
  • 1 - 4 yrs
  • Nashik
Electrical Maintenance Breakdown Maintenance PLC EEE
We are looking for an enthusiastic Electrical Engineer to join our team in Nashik. The ideal candidate will work closely with a team to design, develop, and maintain electrical systems and components.Key Responsibilities:- Design Electrical Systems: Create and develop electrical system designs for projects, ensuring all specifications meet industry standards and project requirements.- Troubleshoot and Repair: Diagnose electrical issues in existing systems and implement effective solutions to repair and enhance their performance.- Testing and Quality Assurance: Conduct tests on electrical systems and components to ensure reliability and safety, documenting results and making necessary adjustments.- Project Collaboration: Work with other engineers and project managers to ensure timely completion of projects while adhering to budget constraints.- Technical Documentation: Prepare detailed technical documents and reports that outline system designs, tests, and modifications for future reference.Required Skills and Expectations:Candidates should possess a Bachelors degree in Electrical Engineering (B.E) and have 1 to 4 years of relevant experience. Strong problem-solving skills and the ability to work well in a team environment are essential. Familiarity with electrical design software and tools is an advantage. Good communication skills are necessary to collaborate with team members effectively. The applicant must be willing to work from our office in Nashik and should be comfortable with tasks that may involve hands-on electrical work.
View all details
  • 0 - 2 yrs
  • 2.5 Lac/Yr
  • Butibori Nagpur
Degree Engineers Chemical Engineer BE Mechanical Mech Maint
We are looking for a Production Maintenance Engineer to join our team based in Butibori. The ideal candidate will oversee the maintenance of production machinery and ensure processes run smoothly. Key Responsibilities:- Equipment Maintenance: Regularly perform inspections and preventive maintenance on production machinery to minimize downtime and ensure operational efficiency.- Troubleshooting Issues: Identify and resolve mechanical problems in equipment promptly to maintain production schedules and meet targets.- Technical Support: Provide technical assistance and support to the production team, ensuring they understand proper machinery operation.- Documentation: Maintain accurate records of maintenance activities, repairs, and inventory of spare parts, ensuring compliance with company standards.- Collaboration: Work closely with other departments to coordinate maintenance activities and support production demands seamlessly.Required Skills and Expectations:Candidates should have a degree or diploma in engineering, ideally with a focus on maintenance or mechanical engineering. A solid understanding of machinery and experience in troubleshooting is essential. Good communication skills are necessary for effective teamwork.Attention to detail and problem-solving abilities are crucial for this role. Candidates must be able to work independently and exhibit a proactive attitude towards learning and improvement. A willingness to work a full-time schedule is expected, along with the ability to thrive in a fast-paced work environment.
View all details
  • 5 - 10 yrs
  • 6.5 Lac/Yr
  • Pune
Mechanical Systems Electrical Systems Analytical Thinking Diagnostic Tools Installation Project Management Technical Documentation Testing Procedures Repair Techniques Field Service Equipment Maintenance
Job Profile & Key Responsibilities:-A Service Engineer at Calitron Calibration Laboratory (OPC) Pvt. Ltd. is responsible for the installation, maintenance, testing, and field or lab calibration of electrical, electronics, mechanical, thermal, and flow instrumentation. On-Site & In-Lab Service: Handle both internal lab duties in Bhosari, Pune, and field-based service visits to customer sites for equipment inspection and maintenance (travel within city/country as required). Installation & Troubleshooting: Install, diagnose, and troubleshoot industrial test and measurement equipment. Documentation & Compliance: Maintain calibration certificates, service reports, logbooks, and trace measurement data accurately to ensure regulatory compliance. Customer Support: Coordinate with clients for equipment servicing, technical queries, and turnaround support.
View all details
  • 0 - 1 yrs
  • 2.5 Lac/Yr
  • Navi Mumbai
Electrical Maintenance Process Automation Plant Automation Electrical Installation
Job for BE / BTech , diploma holder (Electrical)Candidate job profile :-Floating engineer This includes traveling.As a Engineer with a specialization in Electrical Engineering, you'll be responsible for maintaining and improving electrical systems. Your role will involve troubleshooting issues, performing regular maintenance, and ensuring systems operate efficiently and safely. This position requires on-site support, technical expertise, and strong problem-solving skills.Responsibilities:-Troubleshoot and resolve electrical system issues.Perform regular maintenance and inspections of electrical systems.Ensure compliance with safety and regulatory standards.Collaborate with other engineers and technicians to improve efficiency.Document service and maintenance activities accurately.Provide on-site technical support as needed.Manage and prioritize a schedule of multiple service tasks.Job location india Salary- 15k + 3k(Travel allowance)If you interested please share your update resume my email id info@maanarmadafoundation.co.in
View all details
  • 0 - 2 yrs
  • 2.5 Lac/Yr
  • Vasai Palghar
Electrical Maintenance Panel Wiring Signalling Wiring Harness Electrical Installation Electrical Engineer
Installs, Calibrates, Maintains, and Repairs Industrial Weighing Equipment, Including Load Cells, Weighbridges, and Electronic Scales. They Troubleshoot Faulty Systems, Perform On-site Repairs, and Provide Technical Customerkey Responsibilitiesinstallation & Calibration: Fit, Install, and Calibrate Electronic Weighing Scales, Benches, and Heavy-duty Load Cell Modules.maintenance & Repair: Diagnose, Maintain, and Repair Faulty Electronic Components, Circuitry, Load Cells, and Weighing Systems.technical Support: Provide Troubleshooting, Service Support (on-site or Telephone), and Training to Customers On Proper Equipment Use.documentation: Produce Service Reports, Maintenance Logs, and Technical Reports.assembly: Assemble Electrical Components in Production Settings.
View all details
  • 2 - 3 yrs
  • 3.8 Lac/Yr
  • Kamptee Road Nagpur
Mechanical Maintenance Pharmaceutical Industry Mech Maint Plant Maintenance
We are Hiring Maintenance Engineer for Pharmaceutical Company in Nagpur!!!Job Role : Maintenance EngineerEducation: B.E. Mechanical BranchExperience: 3-5 YearsJob Location: Nagpur, MaharashtraPay: 25,000.00 - 35,000.00 per monthPosition OverviewThe Mechanical Maintenance Engineer is responsible for ensuring the reliable operation, maintenance, and repair of mechanical systems and equipment in a pharmaceutical manufacturing facility. This role involves performing preventive and corrective maintenance, troubleshooting equipment issues, and supporting compliance with regulatory standards to maintain production efficiency and safety.Key ResponsibilitiesEquipment Maintenance: Perform routine preventive maintenance, inspections, and repairs on mechanical systems, including HVAC, pumps, compressors, conveyors, and other pharmaceutical manufacturing equipment.Troubleshooting & Repairs: Diagnose mechanical failures, identify root causes, and implement corrective actions to minimize downtime and ensure operational continuity.Compliance & Documentation: Ensure all maintenance activities comply with Good Manufacturing Practices (GMP), FDA, and other regulatory standards. Maintain accurate records of maintenance activities, including work orders and equipment logs.Installation & Commissioning: Assist in the installation, testing, and commissioning of new mechanical equipment and systems, ensuring alignment with operational and regulatory requirements.Spare Parts Management: Monitor inventory of spare parts, recommend procurement, and ensure availability of critical components to support maintenance schedules.Collaboration: Work closely with production teams, quality assurance, and other engineering disciplines to optimize equipment performance and support manufacturing goals.Safety & Risk Management: Adhere to safety protocols, conduct risk assessments, and implement measures to maintain a safe working environment.Continuous Improvement: Identify opportunities for process and equipment improvements, implement modifications, and support lean manufacturing initiatives.QualificationsEducation: Bachelors degree in Mechanical Engineering or a related field.Experience: Minimum of 3-5 years of experience in mechanical maintenance, preferably in a pharmaceutical or regulated manufacturing environment.Technical Skills:Proficiency in maintaining and troubleshooting mechanical systems such as HVAC, pumps, motors, and pneumatic systems.Knowledge of GMP, FDA regulations, and other pharmaceutical industry standards.Familiarity with Computerized Maintenance Management Systems (CMMS).Soft Skills:Strong problem-solving and analytical skills.Excellent communication and teamwork abilities.Ability to work under pressure and manage multiple priorities.BenefitsCompetitive salary and performance-based bonuses.Health, dental, and vision insurance.Paid time off and holidays.Opportunities for professional development and career advancement.Note: This job description is intended to convey information essential to understanding the scope of the position and is not exhaustive. Duties and responsibilities may evolve based on organizational needs.
View all details
  • 3 - 5 yrs
  • 3.5 Lac/Yr
  • Mangaon Raigad
Maintenance Engineer Electrical Engineer Mechanical Engineer Generator Maintenance
Urgent OpeningMaintenance Engineer(Generator & Electrical Equipment)Job Location: Mangaon Education & Experience Degree: Bachelors or Diploma in Electrical Engineering. Experience: 3 to 5 years in industrial or commercial electrical maintenance. Licensure: Valid government electrical supervisor license or competency certificate preferred. Key ResponsibilitiesGenerator Maintenance Execute routine testing, including regular load bank testing and battery checks. Troubleshoot mechanical and electrical faults on diesel/gas generators and alternators. Manage fuel systems, oil changes, filter replacements, and coolant levels. Oversee synchronisation panels and Automatic Transfer Switches (ATS).Electrical Equipment Maintenance Maintain high-voltage and low-voltage distribution boards, switchgear, and transformers. Inspect Uninterruptible Power Supply (UPS) systems and central battery banks regularly. Calibrate electrical protection relays, circuit breakers, and motor control centres (MCC). Diagnose electrical failures using multimeters, infrared thermography, and insulation testers. Compliance & Safety Enforce strict Lockout/Tagout (LOTO) procedures during all maintenance activities. Ensure compliance with national electrical codes, local regulations, and safety standards. Maintain accurate logs of maintenance schedules, equipment failures, and repair costs.
View all details
  • 2 - 4 yrs
  • 3.5 Lac/Yr
  • Mangaon Raigad
Maintenance Engineer Generator Mechanic Electric Mechanic Service Eengineer
Urgent OpeningMaintenance EngineerDiploma in Mechanical/Electrical EngineeringJob Location: MangaonWorkplace: RESORTAccommodation & Food-FREEEducation: Diploma in Electrical/Mechanical Engineering
View all details
  • 2 - 8 yrs
  • 5.0 Lac/Yr
  • Palghar Thane
Diploma in Mechanical Engineering Diploma in Electrical Engineering
Urgent OpeningMaintenance ExecutivePharmaceutical CompanyPalghar East PalgharSalary: Rs. 2 LPA to 5 LPAExperience: 2 Years to 8 YearsImmediate Joining shall be preferredEducation: Diploma in Mechanical/Electrical Engineering
View all details
  • 0 - 6 yrs
  • 30.0 Lac/Yr
  • Mumbai
Aircraft Maintenance Aircraft Maintenance Engineer Aircraft Maintenance Technician Aircraft Mechanic Aircraft Technician Aircraft Engineer Aircraft Maintenance Engineering Aviation Aviation Trainer Avionics Avionics Technician Avionics Engineer Aerospace Engineer Aerospace Aerospace Engineering
An Aircraft Maintenance Engineer (AME) is responsible for inspecting, maintaining, repairing, troubleshooting, and certifying aircraft to ensure they are safe, airworthy, and compliant with aviation regulations. The role involves carrying out scheduled and unscheduled maintenance on aircraft systems, engines, avionics, electrical components, hydraulic systems, landing gear, and structural components while adhering to the standards established by aviation authorities.Key ResponsibilitiesAircraft Inspection & MaintenancePerform routine, preventive, scheduled, and unscheduled aircraft maintenance.Conduct daily, transit, weekly, A-check, B-check, C-check, and heavy maintenance inspections.Inspect aircraft structures, fuselage, wings, landing gear, flight controls, and engines.Diagnose and rectify aircraft defects using approved maintenance procedures.Replace, repair, and overhaul defective aircraft components.Ensure all maintenance tasks are completed according to the Aircraft Maintenance Manual (AMM).Troubleshooting & RepairsIdentify mechanical, hydraulic, electrical, pneumatic, and avionics faults.Use specialized diagnostic tools and testing equipment.Repair aircraft systems while maintaining manufacturer specifications.Coordinate with engineering teams for complex technical issues.Perform functional tests after repairs to verify serviceability.Engine & Component MaintenanceInspect aircraft engines for wear, leaks, corrosion, and damage.Perform engine servicing, oil changes, filter replacement, and component inspections.Maintain propellers, Auxiliary Power Units (APU), and fuel systems.Monitor engine performance and recommend corrective actions.Avionics & Electrical SystemsInspect communication and navigation systems.Maintain radar, autopilot, cockpit instrumentation, and electrical wiring.Test aircraft electronic systems for operational reliability.Ensure compliance with avionics maintenance procedures.Documentation & ComplianceComplete maintenance logs, inspection reports, and defect records.Maintain aircraft technical documentation accurately.Ensure compliance with aviation regulatory authorities.Certify aircraft for return to service after maintenance (where appropriately licensed).Follow company maintenance policies and quality assurance procedures.Safety & Quality AssuranceFollow all aviation safety regulations and standard operating procedures.Maintain clean and organized work areas.Ensure proper use of Personal Protective Equipment (PPE).Report safety hazards and technical discrepancies immediately.Participate in safety audits and quality inspections.Team CoordinationWork closely with pilots, technicians, quality inspectors, and operations staff.Coordinate maintenance schedules with flight operations.Assist junior technicians with technical guidance and training.Participate in emergency aircraft recovery and AOG (Aircraft on Ground) support.Required QualificationsDiploma or Bachelor's Degree in Aircraft Maintenance Engineering, Aeronautical Engineering, Mechanical Engineering, or Aerospace Engineering.DGCA-approved AME qualification or equivalent aviation authority certification is preferred.Valid Aircraft Maintenance Engineer License (where applicable).Type rating on specific aircraft is an advantage.Relevant experience in aircraft maintenance is preferred.Required SkillsStrong knowledge of aircraft systems and maintenance procedures.Excellent troubleshooting and fault diagnosis skills.Knowledge of aviation regulations and airworthiness standards.Ability to interpret aircraft maintenance manuals and engineering drawings.Strong analytical and problem-solving abilities.Excellent attention to detail.Good communication and teamwork skills.Ability to work under pressure and meet strict deadlines.Computer proficiency in maintenance management software.Good technical documentation skills.Technical KnowledgeAircraft StructuresGas Turbine EnginesHydraulic SystemsPneumatic SystemsElectrical SystemsAvionics SystemsFlight Control SystemsLanding Gear SystemsFuel SystemsAircraft DocumentationMaintenance PlanningAircraft Safety StandardsPreferred CertificationsDGCA Aircraft Maintenance Engineer LicenseEASA Part-66 License (preferred internationally)ICAO-compliant aviation trainingHuman Factors TrainingSafety Management System (SMS) TrainingFuel Tank Safety TrainingEWIS (Electrical Wiring Interconnection System) TrainingAircraft Type Rating CertificationWorking ConditionsAirport hangars, maintenance bases, and line maintenance stations.Rotational shifts including nights, weekends, and public holidays.Outdoor work in varying weather conditions.Physically demanding work involving standing, climbing, bending, and lifting equipment.Exposure to aircraft noise, fuels, lubricants, and hydraulic fluids while following strict safety procedures.Salary Range (India)Fresher: 3.5 - 6 LPA2-5 Years: 6 - 10 LPA5-10 Years: 10 - 18 LPALicensed/Type-Rated AME: 15 - 30+ LPA (depending on airline, aircraft type, and experience)
View all details
  • 0 - 1 yrs
  • 3.0 Lac/Yr
  • Nashik
Electrical Engineer Electrical Site Engineer Electrical Maintenance Engineer Electrical Commissioning Engineer Electrical Project Engineer Assistant Electrical Engineer
Key Responsibilities & DutiesElectrical Design & SLD Evaluation:Prepare and interpret Single Line Diagrams (SLDs), control schematics, cable schedules, and panel layout drawings using AutoCAD Electrical or similar design software.Select appropriate switchgear (ACBs, MCCBs, MCBs, Contactors, Relays), busbars, transformers, VFDs, and PLCs based on system load and short-circuit fault calculations.Prepare detailed Bill of Materials (BOMs) and technical specifications for procurement and estimation teams.Assembly, Execution & Site Supervision:Oversee electrical panel wiring, busbar fabrication, transformer/DG setup, and cable tray installation to ensure strict alignment with technical layouts.Conduct insulation testing, continuity checks, high-voltage (HV/LV) testing, and relay calibration prior to commissioning.Supervise field electricians and contractors to ensure execution meets safety standards and project timelines.Maintenance & Troubleshooting:Diagnose, troubleshoot, and rectify electrical faults, trip conditions, power quality issues, and equipment failures promptly.Plan and execute preventive maintenance programs for plant utilities, electrical substations, control panels, and motor control centers (MCC).Enforce electrical safety standards (LOTO - Lockout/Tagout), earthing protocols, and Indian Electricity (IE) rules across the shop floor or site.
View all details
  • 0 - 1 yrs
  • 1.5 Lac/Yr
  • Nashik
Offshore Drilling CATIA Mechanical Design Mechanical Maintenance Rigger AutoCAD Mechanical Offshore Platforms Diploma Mechanical Engineer Diploma Mechanical BE Mechanical Quality Engineering Mechanical Production Petrol Mechanic
Key Responsibilities & DutiesDesign, Modeling & Technical Documentation:Create precise 3D models, assemblies, and 2D manufacturing drawings using CAD software (e.g., AutoCAD, SolidWorks, or Creo). Perform engineering calculations, stress analysis, and thermal/fluid evaluations to validate design performance and safety. Prepare Bill of Materials (BOMs), engineering specifications, and technical documentation for production and procurement teams. Manufacturing Support & Process Optimization:Oversee the fabrication, machining, assembly, and testing of mechanical parts or machinery to ensure strict adherence to design specifications. Apply Design for Manufacturability (DFM) and Lean/5S principles to reduce production waste, scrap, and manufacturing costs. Monitor equipment performance, identify root causes of mechanical failures, and implement corrective or preventive actions (CAPA). Testing, Quality & Maintenance:Plan and execute prototype testing, trial runs, and quality inspections using precision measuring instruments. Coordinate and supervise preventive and corrective maintenance schedules for plant machinery, utilities, and tools. Ensure 100% compliance with local factory rules, safety regulations (EHS), and ISO/ASME quality standards.
View all details
  • 0 - 1 yrs
  • 2.5 Lac/Yr
  • Nashik
Ability to Learn Quickly Analytical Thinking Basic Coding Skills Basic Design Skills Basic Electrical Knowledge Basic Engineering Knowledge Critical Thinking Documentation Skills Hands-on Experience Mathematical Skills Mechanical Aptitude Safety Awareness Team Collaboration Technical Problem-solving Time Management Troubleshooting Skills Equipment Maintenance Computer Literacy Attention to Detail Communication Skills
Key Responsibilities & DutiesTechnical Support & Operational Execution:Assist senior engineers in day-to-day shop-floor manufacturing, site operations, machinery setup, or chemical process monitoring.Prepare and update basic technical documentation, standard operating procedures (SOPs), production logbooks, and inspection reports.Perform quality checks, dimensional measurements using precision instruments (verniers, micrometers, gauges), or raw material sampling.Design, Drafting & Process Monitoring:Support engineering teams with basic 2D drafting, 3D CAD modeling updates, Bill of Materials (BOM) creation, or process flowcharts under supervision.Monitor equipment performance, record operational parameters, and report line breakdowns or process deviations promptly.Quality Control & Preventive Maintenance:Participate in 5S maintenance, Root Cause Analysis (RCA), and quality defect logging (8D/Kaizen activities).Assist maintenance personnel in carrying out routine preventive maintenance schedules for machines, tooling, or plant utilities.Safety & Compliance:Strictly follow plant safety guidelines, personal protective equipment (PPE) protocols, and environmental health and safety (EHS) policies.Attend all assigned technical training modules, safety drills, and skill development workshops.
View all details
  • 0 - 6 yrs
  • 12.0 Lac/Yr
  • Mumbai
Aircraft Maintenance Aircraft Engineer Aircraft Technician Aircraft Supervisor Aircraft Maintenance Engineer Electrical Engineer Mechanical Engineer Aerospace Engineering Aviation Trainer Aviation Avionics Avionics Engineer Aerospace
Aircraft Maintenance professionals are responsible for inspecting, repairing, and maintaining aircraft systems to ensure safety, airworthiness, and compliance with aviation regulations. They work on airframes, engines, electrical systems, and avionics. Key Responsibilities1. Inspection & MaintenanceConduct routine inspections before and after flightsPerform scheduled maintenance (A-check, B-check, C-check, D-check)Diagnose mechanical and technical faults2. Repair & TroubleshootingRepair or replace defective aircraft componentsTroubleshoot engine, hydraulic, and electrical issuesUse diagnostic tools and maintenance manuals3. Testing & Quality ControlTest aircraft systems after maintenanceEnsure all systems meet safety standardsPerform functional and operational checks4. DocumentationMaintain accurate maintenance logs and recordsEnsure compliance with aviation authoritiesReport defects and corrective actions5. Safety ComplianceFollow strict aviation safety regulationsUse proper tools and protective equipmentEnsure aircraft meets airworthiness standards Types of Aircraft MaintenanceLine Maintenance - Routine checks at airportsBase Maintenance - Major repairs in hangarsPreventive Maintenance - Scheduled servicingCorrective Maintenance - Fixing faults/issues Education & QualificationsDiploma/Degree in Aircraft Maintenance Engineering or Aerospace EngineeringCertification from aviation authorities like:DGCA IndiaFAAEASAAME License (mandatory for certifying engineers) Required SkillsStrong technical and mechanical knowledgeAttention to detailProblem-solving abilityKnowledge of aircraft systems and toolsAbility to work under pressureGood communication and teamwork Tools & Equipment UsedDiagnostic testing equipmentHand and power toolsAircraft maintenance softwareTechnical manuals and blueprints Working ConditionsShift-based work (including nights and weekends)Work in hangars, airports, or outdoor environmentsPhysically demanding (lifting, climbing, bending)Exposure to noise and chemicals Career OpportunitiesAircraft Maintenance TechnicianLicensed Aircraft Maintenance EngineerQuality InspectorMaintenance SupervisorMRO SpecialistTop aviation employers include airlines, defense organizations, and companies like Air India, IndiGo, and SpiceJet. Salary (India Approx.)Fresher: 2.5 - 4 LPAExperienced: 5 - 12+ LPALicensed AME: 10 - 25+ LPA
View all details
  • 0 - 6 yrs
  • 12.0 Lac/Yr
  • Mumbai
Aircraft Maintenance Aircraft Engineer Avionics Engineer Aerospace Engineer Aerospace Avionics Aircraft Technician Aircraft Mechanic Electrical Engineer Mechanical Engineer Electronics Engineer Project Engineer Aircraft Maintenance Technician
An Aircraft Maintenance Technician is responsible for inspecting, maintaining, troubleshooting, repairing, and servicing aircraft systems and components to ensure aircraft airworthiness, safety, and compliance with aviation regulations. The technician performs scheduled and unscheduled maintenance activities on aircraft structures, engines, avionics, hydraulic systems, and other critical equipment.Key ResponsibilitiesAircraft Inspection & MaintenancePerform routine, preventive, and scheduled maintenance on aircraft.Conduct pre-flight, transit, daily, weekly, and periodic inspections.Inspect aircraft structures, engines, landing gear, and mechanical systems.Ensure aircraft meet safety and airworthiness standards.Identify defects, wear, corrosion, or damage.Troubleshooting & RepairsDiagnose mechanical, electrical, hydraulic, and pneumatic faults.Repair or replace defective aircraft components.Troubleshoot aircraft systems using technical manuals and diagnostic equipment.Perform corrective maintenance and emergency repairs.Aircraft Systems MaintenanceMaintain aircraft engines and propulsion systems.Service hydraulic, fuel, pneumatic, and environmental control systems.Inspect and maintain landing gear and braking systems.Assist in avionics and electrical system maintenance.Perform lubrication and component servicing.Documentation & ComplianceRecord maintenance activities accurately in maintenance logs.Complete work orders, inspection reports, and service records.Ensure compliance with DGCA, FAA, EASA, and airline maintenance standards.Follow aircraft maintenance manuals and engineering procedures.Safety & Quality AssuranceFollow aviation safety regulations and company SOPs.Maintain a clean and organized work environment.Use Personal Protective Equipment (PPE) appropriately.Participate in safety audits and quality inspections.Report safety hazards and maintenance irregularities.Ground Support OperationsOperate aircraft servicing equipment and tools.Assist in aircraft towing and hangar operations.Coordinate with engineers, technicians, and flight operations staff.Support aircraft turnaround activities when required.Required SkillsAircraft maintenance and inspection knowledge.Mechanical and electrical troubleshooting skills.Knowledge of aircraft systems and components.Ability to read technical manuals and engineering drawings.Familiarity with aviation regulations and safety procedures.Problem-solving and analytical skills.Teamwork and communication abilities.Attention to detail and accuracy.Computer literacy and maintenance software knowledge.Educational QualificationsEssentialDiploma or Degree in Aircraft Maintenance Engineering, Aeronautical Engineering, Mechanical Engineering, or related field.PreferredDGCA-approved AME course.Aircraft Type Training Certification.Aviation maintenance certifications.Experience RequirementsFresherBasic knowledge of aircraft maintenance procedures.Practical training or apprenticeship experience preferred.Experienced1-5+ years of aircraft maintenance experience.Experience on commercial, cargo, or private aircraft.Knowledge of aircraft maintenance documentation systems.Working ConditionsAirport, hangar, workshop, and maintenance facilities.Rotational shifts including nights, weekends, and holidays.Exposure to aircraft noise and outdoor weather conditions.Physical work involving lifting, climbing, and working in confined spaces.Salary Range (India)Fresher: 25,000 - 30,000 per month1-3 Years Experience: 30,000 - 50,000 per month3-5 Years Experience: 50,000 - 80,000 per monthLicensed/Highly Skilled Technicians: 80,000+ per month
View all details

Hiring For Electrical Engineer

Vijaya Management Services

  • 2 - 5 yrs
  • 6.0 Lac/Yr
  • Pune
Electrical Maintenance PLC Breakdown Maintenance
We are requirement for the position of Electrical EngineerManufacturing Company Must have exp in electricalRequired that electrical license.Collaborate with other departments to ensure seamless project executionSupervise and coordinate electrical work activities to ensure compliance with safety standards and regulations3+ years of exp. in electricalQualification- Diploma or B.E- Electrical Contact person- Deepak- 7757087059
View all details
  • 1 - 5 yrs
  • 3.5 Lac/Yr
  • Viman Nagar Pune
Electrical Maintenance Breakdown Maintenance Wiring Problem
We are looking for an Electrical Engineer to join our team in Viman Nagar, Pune. The ideal candidate will have 1 to 5 years of experience and a diploma in electrical engineering. This role is primarily office-based.Key Responsibilities:- Design and Development: You will create electrical systems and components, ensuring they meet industry standards and project specifications. This involves using design software and tools for optimal results.- Testing and Troubleshooting: You will test electrical equipment and systems to ensure they function correctly. Identifying and fixing issues will be a crucial part of your work.- Collaboration with Teams: You will work closely with other engineers and project managers to ensure that projects are completed on time and meet client requirements. Good communication skills will help you share ideas and solutions effectively.- Project Documentation: You will be responsible for maintaining clear and detailed documentation of your designs and testing processes. This helps ensure transparency and future reference for ongoing work.Required Skills and Expectations:The ideal candidate should possess strong technical knowledge of electrical systems and be proficient in using related software tools. You should be detail-oriented with problem-solving skills and the ability to work independently as well as in a team. Strong communication skills and a proactive attitude are essential for success in this role. As this position is office-based, a commitment to working on-site is required.
View all details
  • 0 - 6 yrs
  • 9.0 Lac/Yr
  • Pune
Technical Troubleshooting Technical Skills Troubleshooting Skills Problem Solving Work Under Pressure Good Communication Teamwork Aircraft Maintenance Aircraft Maintenance Technician Avionics Aviation
An Aircraft Maintenance Engineer is responsible for inspecting, maintaining, repairing, and ensuring the airworthiness of aircraft systems and components. They ensure that aircraft meet safety regulations and are safe for flight operations by following aviation authority standards.Key ResponsibilitiesInspect aircraft systems, engines, and components before and after flights.Perform routine maintenance, repairs, and overhauls on aircraft.Diagnose mechanical and electrical faults in aircraft systems.Replace or repair defective aircraft parts and components.Ensure compliance with aviation safety standards and regulations.Maintain detailed maintenance records and technical documentation.Conduct troubleshooting on aircraft systems such as engines, landing gear, hydraulics, and avionics.Coordinate with pilots and ground crew regarding aircraft condition and maintenance issues.Test aircraft systems to ensure proper functioning after maintenance.Ensure all work is completed according to aviation authority guidelines.Required SkillsStrong knowledge of aircraft systems and engineering principlesMechanical and technical troubleshooting skillsAttention to detail and safety awarenessProblem-solving abilityAbility to work under pressure and in shiftsGood communication and teamwork skillsEducational QualificationDiploma or Degree in Aircraft Maintenance Engineering (AME) or Aeronautical Engineering.Certification or license from aviation authority (such as DGCA in India).ExperienceFreshers can work as Technicians or Trainees.Experienced engineers may work as Licensed Aircraft Maintenance Engineers.Work EnvironmentAirports and aircraft hangarsAviation maintenance organizationsAirlines and aircraft manufacturing companies
View all details
  • 0 - 6 yrs
  • 20.0 Lac/Yr
  • Pune
Aircraft Maintenance Aircraft Maintenance Engineer Aircraft Maintenance Technician Aircraft Engineer Aircraft Mechanic Aircraft Technician Aircraft Supervisor Electrical Engineer Mechanical Engineer Avionics Engineer Aerospace Engineering Project Engineer
We are seeking an Aircraft Maintenance Engineer to join our team in Pune. This role is suitable for candidates with 0 to 6 years of experience and a minimum education level of 12th pass. As an Aircraft Maintenance Engineer, you will play a crucial role in ensuring the safety and efficiency of aircraft.Key Responsibilities:- Conduct Inspections: Regularly inspect aircraft components and systems to identify any wear, damage, or required maintenance. This is vital for ensuring all aircraft meet safety regulations.- Perform Maintenance and Repairs: Execute scheduled and unscheduled maintenance tasks on aircraft according to manufacturer specifications, ensuring airworthiness and reliability.- Troubleshoot Issues: Analyze and diagnose mechanical and electrical issues in aircraft systems. Quick and accurate problem-solving is essential to minimize downtime.- Maintain Records: Keep detailed maintenance logs and reports of all inspections and repairs performed. Accurate documentation is necessary for compliance and safety audits.- Collaborate with Teams: Work closely with other engineers and technicians to coordinate maintenance activities and ensure effective communication regarding ongoing projects.Required Skills and Expectations:Candidates should have strong attention to detail and a commitment to safety. Good problem-solving skills are essential to address technical issues effectively. Being a team player is crucial, as you will work alongside other professionals in a fast-paced environment. A basic understanding of aircraft systems and proficiency in using maintenance tools and software will be advantageous. Strong communication skills are also important for collaborating with team members and reporting findings.
View all details

Maintenance Engineer || Freshers & Experienced

Career Club Consultancy and Management Services

  • 0 - 3 yrs
  • 2.0 Lac/Yr
  • Nashik
Maintenance Engineer Maintenance Incharge Mechanical Maintenance Engineer Walk in
Placement Charges ApplicableCareer club consultancy. NashikMaintenance Engineer BE Mechanical -MaleFreshers/ExperiencedSal -Upto 14 KNashik
View all details
View More Jobs

Apply to 362 Maintenance Engineer Job Vacancies in Maharashtra

  • Hyderabad Jobs
  • Ahmedabad Jobs
  • Bangalore Jobs
  • Mumbai Jobs
  • Pune Jobs
  • Chennai Jobs
  • Kolkata Jobs
  • Delhi Jobs