Maintenance Technician Job Vacancies in Bangalore

Job SummaryAn Aircraft Maintenance Engineer (AME) is responsible for inspecting, maintaining, repairing, troubleshooting, and certifying aircraft to ensure they are safe, airworthy, and compliant with aviation regulations. The role involves carrying out scheduled and unscheduled maintenance on aircraft systems, engines, avionics, electrical components, hydraulic systems, landing gear, and structural components while adhering to the standards established by aviation authorities.Key ResponsibilitiesAircraft Inspection & MaintenancePerform routine, preventive, scheduled, and unscheduled aircraft maintenance.Conduct daily, transit, weekly, A-check, B-check, C-check, and heavy maintenance inspections.Inspect aircraft structures, fuselage, wings, landing gear, flight controls, and engines.Diagnose and rectify aircraft defects using approved maintenance procedures.Replace, repair, and overhaul defective aircraft components.Ensure all maintenance tasks are completed according to the Aircraft Maintenance Manual (AMM).Troubleshooting & RepairsIdentify mechanical, hydraulic, electrical, pneumatic, and avionics faults.Use specialized diagnostic tools and testing equipment.Repair aircraft systems while maintaining manufacturer specifications.Coordinate with engineering teams for complex technical issues.Perform functional tests after repairs to verify serviceability.Engine & Component MaintenanceInspect aircraft engines for wear, leaks, corrosion, and damage.Perform engine servicing, oil changes, filter replacement, and component inspections.Maintain propellers, Auxiliary Power Units (APU), and fuel systems.Monitor engine performance and recommend corrective actions.Avionics & Electrical SystemsInspect communication and navigation systems.Maintain radar, autopilot, cockpit instrumentation, and electrical wiring.Test aircraft electronic systems for operational reliability.Ensure compliance with avionics maintenance procedures.Documentation & ComplianceComplete maintenance logs, inspection reports, and defect records.Maintain aircraft technical documentation accurately.Ensure compliance with aviation regulatory authorities.Certify aircraft for return to service after maintenance (where appropriately licensed).Follow company maintenance policies and quality assurance procedures.Safety & Quality AssuranceFollow all aviation safety regulations and standard operating procedures.Maintain clean and organized work areas.Ensure proper use of Personal Protective Equipment (PPE).Report safety hazards and technical discrepancies immediately.Participate in safety audits and quality inspections.Team CoordinationWork closely with pilots, technicians, quality inspectors, and operations staff.Coordinate maintenance schedules with flight operations.Assist junior technicians with technical guidance and training.Participate in emergency aircraft recovery and AOG (Aircraft on Ground) support.Required QualificationsDiploma or Bachelor's Degree in Aircraft Maintenance Engineering, Aeronautical Engineering, Mechanical Engineering, or Aerospace Engineering.DGCA-approved AME qualification or equivalent aviation authority certification is preferred.Valid Aircraft Maintenance Engineer License (where applicable).Type rating on specific aircraft is an advantage.Relevant experience in aircraft maintenance is preferred.Required SkillsStrong knowledge of aircraft systems and maintenance procedures.Excellent troubleshooting and fault diagnosis skills.Knowledge of aviation regulations and airworthiness standards.Ability to interpret aircraft maintenance manuals and engineering drawings.Strong analytical and problem-solving abilities.Excellent attention to detail.Good communication and teamwork skills.Ability to work under pressure and meet strict deadlines.Computer proficiency in maintenance management software.Good technical documentation skills.Technical KnowledgeAircraft StructuresGas Turbine EnginesHydraulic SystemsPneumatic SystemsElectrical SystemsAvionics SystemsFlight Control SystemsLanding Gear SystemsFuel SystemsAircraft DocumentationMaintenance PlanningAircraft Safety StandardsPreferred CertificationsDGCA Aircraft Maintenance Engineer LicenseEASA Part-66 License (preferred internationally)ICAO-compliant aviation trainingHuman Factors TrainingSafety Management System (SMS) TrainingFuel Tank Safety TrainingEWIS (Electrical Wiring Interconnection System) TrainingAircraft Type Rating CertificationWorking ConditionsAirport hangars, maintenance bases, and line maintenance stations.Rotational shifts including nights, weekends, and public holidays.Outdoor work in varying weather conditions.Physically demanding work involving standing, climbing, bending, and lifting equipment.Exposure to aircraft noise, fuels, lubricants, and hydraulic fluids while following strict safety procedures.Salary Range (India)Fresher: 3.5 - 6 LPA2-5 Years: 6 - 10 LPA5-10 Years: 10 - 18 LPALicensed/Type-Rated AME: 15 - 30+ LPA (depending on airline, aircraft type, and experience)

Job TitleAircraft Maintenance Engineer (AME)DepartmentAircraft Maintenance / EngineeringLocationsBangaloreMangaloreBelagaviBallariBidarHubliKalaburgiKoppalMysoreShivamoggaJob SummaryAn Aircraft Maintenance Engineer (AME) is responsible for inspecting, maintaining, repairing, troubleshooting, and certifying aircraft to ensure they are safe, airworthy, and compliant with aviation regulations. The role involves carrying out scheduled and unscheduled maintenance on aircraft systems, engines, avionics, electrical components, hydraulic systems, landing gear, and structural components while adhering to the standards established by aviation authorities.Key ResponsibilitiesAircraft Inspection & MaintenancePerform routine, preventive, scheduled, and unscheduled aircraft maintenance.Conduct daily, transit, weekly, A-check, B-check, C-check, and heavy maintenance inspections.Inspect aircraft structures, fuselage, wings, landing gear, flight controls, and engines.Diagnose and rectify aircraft defects using approved maintenance procedures.Replace, repair, and overhaul defective aircraft components.Ensure all maintenance tasks are completed according to the Aircraft Maintenance Manual (AMM).Troubleshooting & RepairsIdentify mechanical, hydraulic, electrical, pneumatic, and avionics faults.Use specialized diagnostic tools and testing equipment.Repair aircraft systems while maintaining manufacturer specifications.Coordinate with engineering teams for complex technical issues.Perform functional tests after repairs to verify serviceability.Engine & Component MaintenanceInspect aircraft engines for wear, leaks, corrosion, and damage.Perform engine servicing, oil changes, filter replacement, and component inspections.Maintain propellers, Auxiliary Power Units (APU), and fuel systems.Monitor engine performance and recommend corrective actions.Avionics & Electrical SystemsInspect communication and navigation systems.Maintain radar, autopilot, cockpit instrumentation, and electrical wiring.Test aircraft electronic systems for operational reliability.Ensure compliance with avionics maintenance procedures.Documentation & ComplianceComplete maintenance logs, inspection reports, and defect records.Maintain aircraft technical documentation accurately.Ensure compliance with aviation regulatory authorities.Certify aircraft for return to service after maintenance (where appropriately licensed).Follow company maintenance policies and quality assurance procedures.Safety & Quality AssuranceFollow all aviation safety regulations and standard operating procedures.Maintain clean and organized work areas.Ensure proper use of Personal Protective Equipment (PPE).Report safety hazards and technical discrepancies immediately.Participate in safety audits and quality inspections.Team CoordinationWork closely with pilots, technicians, quality inspectors, and operations staff.Coordinate maintenance schedules with flight operations.Assist junior technicians with technical guidance and training.Participate in emergency aircraft recovery and AOG (Aircraft on Ground) support.Required QualificationsDiploma or Bachelor's Degree in Aircraft Maintenance Engineering, Aeronautical Engineering, Mechanical Engineering, or Aerospace Engineering.DGCA-approved AME qualification or equivalent aviation authority certification is preferred.Valid Aircraft Maintenance Engineer License (where applicable).Type rating on specific aircraft is an advantage.Relevant experience in aircraft maintenance is preferred.Required SkillsStrong knowledge of aircraft systems and maintenance procedures.Excellent troubleshooting and fault diagnosis skills.Knowledge of aviation regulations and airworthiness standards.Ability to interpret aircraft maintenance manuals and engineering drawings.Strong analytical and problem-solving abilities.Excellent attention to detail.Good communication and teamwork skills.Ability to work under pressure and meet strict deadlines.Computer proficiency in maintenance management software.Good technical documentation skills.Technical KnowledgeAircraft StructuresGas Turbine EnginesHydraulic SystemsPneumatic SystemsElectrical SystemsAvionics SystemsFlight Control SystemsLanding Gear SystemsFuel SystemsAircraft DocumentationMaintenance PlanningAircraft Safety StandardsPreferred CertificationsDGCA Aircraft Maintenance Engineer LicenseEASA Part-66 License (preferred internationally)ICAO-compliant aviation trainingHuman Factors TrainingSafety Management System (SMS) TrainingFuel Tank Safety TrainingEWIS (Electrical Wiring Interconnection System) TrainingAircraft Type Rating CertificationWorking ConditionsAirport hangars, maintenance bases, and line maintenance stations.Rotational shifts including nights, weekends, and public holidays.Outdoor work in varying weather conditions.Physically demanding work involving standing, climbing, bending, and lifting equipment.Exposure to aircraft noise, fuels, lubricants, and hydraulic fluids while following strict safety procedures.Salary Range (India)Fresher: 3.5 - 6 LPA2-5 Years: 6 - 10 LPA5-10 Years: 10 - 18 LPALicensed/Type-Rated AME: 15 - 30+ LPA (depending on airline, aircraft type, and experience)

We are seeking a motivated Field Service Engineer to join our team in Bangalore. This entry-level position is ideal for candidates with an I.T.I. qualification who are eager to start their careers in the engineering field. The role involves ensuring that equipment is installed and maintained to meet customer satisfaction.Key Responsibilities:1. Installation and Setup: You will be responsible for setting up and installing equipment at client locations, ensuring everything is operational and meets quality standards.2. Maintenance and Repair: Conduct regular maintenance checks and perform necessary repairs on equipment to prevent malfunctions and extend the lifespan of devices.3. Customer Support: Provide excellent customer service, addressing any technical issues and answering client queries to ensure a smooth experience.4. Documentation: Maintain accurate records of service operations, including installation details and maintenance logs, to keep track of all activities.5. Collaboration: Work closely with your team and other departments to ensure that service goals and customer expectations are met.Required Skills and Expectations:Candidates should possess strong problem-solving abilities and technical skills related to equipment maintenance. Good communication skills are essential for interacting with clients and addressing their needs effectively. A willingness to learn and adapt to new technologies is important, as is the ability to work as part of a team. A clean driving record and readiness to travel for field service tasks may also be required.

An Aircraft Maintenance Engineer (AME) is responsible for inspecting, maintaining, repairing, troubleshooting, and certifying aircraft to ensure they are safe, airworthy, and compliant with aviation regulations. The role involves carrying out scheduled and unscheduled maintenance on aircraft systems, engines, avionics, electrical components, hydraulic systems, landing gear, and structural components while adhering to the standards established by aviation authorities.Key ResponsibilitiesAircraft Inspection & MaintenancePerform routine, preventive, scheduled, and unscheduled aircraft maintenance.Conduct daily, transit, weekly, A-check, B-check, C-check, and heavy maintenance inspections.Inspect aircraft structures, fuselage, wings, landing gear, flight controls, and engines.Diagnose and rectify aircraft defects using approved maintenance procedures.Replace, repair, and overhaul defective aircraft components.Ensure all maintenance tasks are completed according to the Aircraft Maintenance Manual (AMM).Troubleshooting & RepairsIdentify mechanical, hydraulic, electrical, pneumatic, and avionics faults.Use specialized diagnostic tools and testing equipment.Repair aircraft systems while maintaining manufacturer specifications.Coordinate with engineering teams for complex technical issues.Perform functional tests after repairs to verify serviceability.Engine & Component MaintenanceInspect aircraft engines for wear, leaks, corrosion, and damage.Perform engine servicing, oil changes, filter replacement, and component inspections.Maintain propellers, Auxiliary Power Units (APU), and fuel systems.Monitor engine performance and recommend corrective actions.Avionics & Electrical SystemsInspect communication and navigation systems.Maintain radar, autopilot, cockpit instrumentation, and electrical wiring.Test aircraft electronic systems for operational reliability.Ensure compliance with avionics maintenance procedures.Documentation & ComplianceComplete maintenance logs, inspection reports, and defect records.Maintain aircraft technical documentation accurately.Ensure compliance with aviation regulatory authorities.Certify aircraft for return to service after maintenance (where appropriately licensed).Follow company maintenance policies and quality assurance procedures.Safety & Quality AssuranceFollow all aviation safety regulations and standard operating procedures.Maintain clean and organized work areas.Ensure proper use of Personal Protective Equipment (PPE).Report safety hazards and technical discrepancies immediately.Participate in safety audits and quality inspections.Team CoordinationWork closely with pilots, technicians, quality inspectors, and operations staff.Coordinate maintenance schedules with flight operations.Assist junior technicians with technical guidance and training.Participate in emergency aircraft recovery and AOG (Aircraft on Ground) support.Required QualificationsDiploma or Bachelor's Degree in Aircraft Maintenance Engineering, Aeronautical Engineering, Mechanical Engineering, or Aerospace Engineering.DGCA-approved AME qualification or equivalent aviation authority certification is preferred.Valid Aircraft Maintenance Engineer License (where applicable).Type rating on specific aircraft is an advantage.Relevant experience in aircraft maintenance is preferred.Required SkillsStrong knowledge of aircraft systems and maintenance procedures.Excellent troubleshooting and fault diagnosis skills.Knowledge of aviation regulations and airworthiness standards.Ability to interpret aircraft maintenance manuals and engineering drawings.Strong analytical and problem-solving abilities.Excellent attention to detail.Good communication and teamwork skills.Ability to work under pressure and meet strict deadlines.Computer proficiency in maintenance management software.Good technical documentation skills.Technical KnowledgeAircraft StructuresGas Turbine EnginesHydraulic SystemsPneumatic SystemsElectrical SystemsAvionics SystemsFlight Control SystemsLanding Gear SystemsFuel SystemsAircraft DocumentationMaintenance PlanningAircraft Safety StandardsPreferred CertificationsDGCA Aircraft Maintenance Engineer LicenseEASA Part-66 License (preferred internationally)ICAO-compliant aviation trainingHuman Factors TrainingSafety Management System (SMS) TrainingFuel Tank Safety TrainingEWIS (Electrical Wiring Interconnection System) TrainingAircraft Type Rating CertificationWorking ConditionsAirport hangars, maintenance bases, and line maintenance stations.Rotational shifts including nights, weekends, and public holidays.Outdoor work in varying weather conditions.Physically demanding work involving standing, climbing, bending, and lifting equipment.Exposure to aircraft noise, fuels, lubricants, and hydraulic fluids while following strict safety procedures.Salary Range (India)Fresher: 3.5 - 6 LPA2-5 Years: 6 - 10 LPA5-10 Years: 10 - 18 LPALicensed/Type-Rated AME: 15 - 30+ LPA (depending on airline, aircraft type, and experience)

As an Aircraft Maintenance Engineer, you will play a vital role in ensuring the safety and reliability of aircraft. You will be responsible for performing maintenance, repairs, and inspections on various aircraft systems. Key Responsibilities:- Conduct Routine Inspections: Regularly check aircraft systems, engines, and structures to ensure they meet safety standards and operational requirements.- Perform Repairs: Diagnose and fix issues with aircraft components such as engines, electrical systems, and landing gear to maintain high operational performance.- Documentation: Maintain accurate records of all maintenance activities and inspections performed to comply with aviation regulations and standards.- Collaborate with Team: Work closely with other engineers and technicians to share knowledge and ensure that all maintenance tasks are completed efficiently and safely.- Adhere to Safety Regulations: Follow all safety protocols and guidelines to maintain a safe working environment for yourself and your colleagues.Required Skills and Expectations:A good candidate should have a keen attention to detail, as accuracy is critical in aviation. Effective communication and teamwork skills are essential to work well with other professionals in the field. The ability to problem-solve quickly and efficiently is important, especially when dealing with unexpected issues. Basic technical knowledge of aviation systems and a strong commitment to safety and compliance with regulations are crucial. Candidates with a background in engineering or a strong interest in aircraft maintenance will find this position rewarding.

We are looking for an ITI Electrician with 1 to 2 years of experience to join our team in Bangalore. This full-time position requires practical skills in electrical systems and a good understanding of safety protocols.Key Responsibilities:- Electrical Installation: You will install, maintain, and repair electrical systems and equipment. This includes wiring, lighting, and circuit breakers to ensure everything operates efficiently.- Troubleshooting: You will identify and resolve electrical issues. Using diagnostic tools, you will test electrical components to find faults and suggest effective solutions.- Maintenance: Regular checks and maintenance of electrical systems will be part of your duties. Keeping equipment in good condition minimizes breakdowns and enhances safety.- Safety Compliance: You will adhere to safety rules and regulations. Following safety protocols is essential to prevent accidents and ensure a safe working environment for yourself and others.Required Skills and Expectations:Candidates must have completed an I.T.I. course in electrical engineering or a related field. You should possess knowledge of electrical systems and be able to read technical drawings. Strong problem-solving skills are essential, as well as attention to detail. You must be able to work independently and in a team, and effective communication skills will help you to collaborate with colleagues efficiently. Punctuality and a reliable work ethic are crucial for this role.

As an Aircraft Engineer, you will play a vital role in ensuring the safety and performance of aircraft. Your primary responsibilities will include:- Aircraft Maintenance: Conduct regular inspections and maintenance checks on aircraft to ensure they are safe and fully operational, following industry standards and regulations.- Troubleshooting and Repair: Identify and fix technical issues and malfunctions in aircraft systems, ensuring timely repairs to avoid delays in operations.- Documentation: Maintain accurate records of inspections, repairs, and maintenance activities, which are crucial for compliance and safety audits.- Collaboration: Work closely with other engineers and maintenance staff to share knowledge and improve processes, enhancing overall efficiency in the workplace.- Continuous Learning: Stay updated with industry developments and new technologies related to aircraft systems, ensuring that your skills and knowledge remain relevant.To succeed in this role, you should have:- A background in aviation or engineering, ideally with relevant coursework or training.- Strong problem-solving skills and the ability to think critically under pressure.- Good attention to detail to ensure precision in maintenance and repairs.- Effective communication skills to relay technical information clearly to team members.- A commitment to safety, quality, and adherence to regulatory standards.This role is suitable for individuals with 0 to 6 years of experience who have completed at least their 12th grade education. You will be required to work from the office in Bangalore, collaborating with your team daily.

As an Aircraft Maintenance Technician, you will play a crucial role in ensuring the safety and efficiency of aircraft operations. Your primary responsibilities will include:- Inspecting Aircraft: Regularly examine aircraft to identify any repairs or maintenance needed. This involves checking engines, landing gear, and other critical components to ensure they meet safety standards.- Performing Repairs: Carry out necessary repairs on aircraft systems and structures. You will use tools and equipment to fix issues found during inspections and ensure aircraft are in top condition.- Conducting Maintenance Checks: Perform scheduled maintenance checks as per regulatory guidelines. You will follow established procedures to make sure that each aircraft complies with safety regulations and manufacturer recommendations.- Documenting Work: Maintain detailed records of repairs and maintenance performed. This documentation is essential for tracking maintenance history and ensuring compliance with aviation regulations.- Collaborating with Team Members: Work alongside other technicians and engineers in a team environment. Clear communication is vital to ensure that all tasks are completed efficiently and safely.To excel in this role, candidates should have a basic understanding of aircraft systems and maintenance practices. Attention to detail is key, as is the ability to work under pressure. Good communication skills are important for effective teamwork. A willingness to learn and adapt to new technologies in the aviation industry is also expected.

Key ResponsibilitiesPerform routine inspections (pre-flight, transit, daily, weekly).Troubleshoot mechanical, hydraulic, electrical, and avionics faults.Repair or replace defective components (engines, landing gear, control systems).Use diagnostic tools, manuals, and maintenance software.Complete and certify maintenance records and logbooks.Ensure compliance with airworthiness directives and safety standards.Coordinate with pilots, engineers, and ground staff.Maintain cleanliness and tool control in work areas.Types of Maintenance WorkLine maintenance quick checks and fixes between flights.Base/heavy maintenance detailed inspections, structural work, major overhauls.Component/shop maintenance repairing parts removed from aircraft.Skills & CompetenciesStrong mechanical and electrical knowledge.Ability to read technical manuals and schematics.Troubleshooting and analytical thinking.Attention to detail and safety awareness.Physical stamina; ability to work in shifts, nights, outdoors.Team coordination and communication.Educational QualificationAME/AMT diploma or degree in aircraft maintenance/aviation engineering.Licensing from aviation authorities (where required).Type rating on specific aircraft is a big advantage.Tools & Equipment UsedHand and power tools.Aircraft jacks and hydraulic rigs.Testing and calibration equipment.Digital maintenance tracking systems.Work EnvironmentAirport ramps.Maintenance hangars.Repair workshops.May involve noise, heights, and varied weather conditions.

Job Openings for 3 Electrical Engineer Jobs for Freshers in Bangalore, having Educational qualification of : Diploma, B.E, B.Tech with Good knowledge in EEE,ECE,Field Service,Electrical Maintenance,Sales,Marketing,Quality Inspector,Production Engineer,Product Promotion,Business Development etc.company will give good salary n others benifits also.

An Aircraft Technician is responsible for inspecting, maintaining, repairing, and testing aircraft systems and components to ensure safe and efficient aircraft operations. The technician works on mechanical, electrical, hydraulic, pneumatic, and avionics systems according to aviation safety standards and regulatory requirements.Aircraft Technicians perform scheduled maintenance, troubleshoot technical faults, replace defective parts, and certify aircraft readiness for flight under the supervision of licensed engineers when required.Key ResponsibilitiesAircraft Inspection & MaintenancePerform routine and scheduled aircraft maintenance checks.Inspect aircraft structures, engines, landing gear, and control systems.Conduct pre-flight, transit, daily, weekly, and periodic inspections.Identify defects, malfunctions, and mechanical issues.Repair & TroubleshootingDiagnose technical and mechanical faults in aircraft systems.Repair or replace damaged aircraft components and parts.Troubleshoot hydraulic, pneumatic, fuel, electrical, and engine systems.Use specialized testing and diagnostic equipment.Component InstallationInstall aircraft parts, instruments, wiring, and assemblies.Remove and replace aircraft engines or system components when required.Ensure all installations comply with aviation safety standards.Documentation & ReportingMaintain accurate maintenance logs and technical records.Complete inspection reports and work orders.Record all repairs, replacements, and maintenance activities.Ensure compliance with aviation authority regulations.Safety ComplianceFollow aviation safety procedures and maintenance manuals.Adhere to company policies and international aviation regulations.Ensure tools and equipment are properly calibrated and maintained.Maintain a clean and safe working environment.Team CoordinationWork closely with Aircraft Maintenance Engineers, pilots, and ground staff.Coordinate with technical supervisors and quality assurance teams.Assist during aircraft turnaround operations.Types of Aircraft Systems HandledAircraft EnginesHydraulic SystemsElectrical SystemsFuel SystemsBrake SystemsPneumatic SystemsLanding GearFlight Control SystemsCabin SystemsAvionics EquipmentRequired SkillsStrong mechanical and technical knowledgeTroubleshooting and problem-solving abilityKnowledge of aircraft systems and maintenance proceduresAbility to read technical manuals and engineering drawingsAttention to detail and accuracyGood communication and teamwork skillsTime management and multitasking abilitiesSafety awareness and compliance knowledgeEducational QualificationsDiploma or Degree in Aircraft Maintenance Engineering, Aeronautical Engineering, or Aerospace EngineeringAME (Aircraft Maintenance Engineering) certification preferredDGCA/FAA/EASA-approved training is an advantageTechnical vocational training in aviation maintenance may also be acceptedExperience RequirementsFresherBasic knowledge of aircraft maintenance proceduresInternship or training experience preferredExperienced Technician1-5+ years of aircraft maintenance experienceExperience on commercial or private aircraftFamiliarity with aviation maintenance software and toolsCertifications PreferredDGCA AME LicenseFAA A&P LicenseEASA Part-66 LicenseHuman Factors & Safety TrainingFuel Tank Safety CertificationAviation Safety Management TrainingWorking EnvironmentAirportsAircraft hangarsMaintenance workshopsAviation maintenance organizations (MRO)Airlines and private aviation companiesAircraft Technicians may work:Rotational shiftsNight shiftsWeekends and holidaysIn noisy and physically demanding environmentsPhysical RequirementsAbility to stand for long hoursClimb ladders and work at heightsLift heavy aircraft parts and toolsWork in confined spacesGood hand-eye coordination and physical fitnessSalary Range (Approx.)IndiaFresher: 20,000 - 35,000 per monthExperienced: 40,000 - 1,20,000+ per month