Diploma Engineer Job Vacancies in Maharashtra

Generator maintenance 24hrs power back up should be availableNever have to happend Power breakdown candidate must have knowlwge about generatorsmust have to kwon power backup candidates must have 4 to 5 years experiance in electrical engineer

Key ResponsibilitiesSystem Design & Layout: Design comprehensive hydraulic networks including domestic water supply, flushing water systems, water treatment plants (WTP/STP integration), internal/external drainage, storm-water harvesting, and hot water systems.Engineering Calculations: Perform precise engineering calculations for pipe sizing, pump head requirements, water demand estimation, storage tank capacities (UGWT/OHBR), and pressure drop analysis.Drafting & Modeling: Develop detailed 2D layouts, schematics, riser diagrams, and isometric drawings using AutoCAD. Coordinate 3D modeling and clash detection using Revit MEP where required.Firefighting System Design: Assist in designing basic fire protection infrastructure, including wet risers, sprinkler systems, and fire hydrant layouts in accordance with local fire safety norms.BOQ & Specification: Prepare comprehensive Bill of Quantities (BOQ), cost estimations, material specifications, and technical data sheets for tendering and procurement.Codes & Compliance: Ensure all plumbing and public health engineering designs strictly comply with the National Building Code (NBC), local municipal authorities (e.g., PMC/NMC guidelines), and international standards like IPC or UPC.Site Coordination: Review shop drawings submitted by contractors, respond to RFIs (Requests for Information), and occasionally visit project sites to resolve critical design queries or conduct compliance audits.

You have to Sales Electronic Products.

Role & responsibilities- Execution of construction work as per drawing from excavation till finishing- Site Supervision- Labor Handling- Monitoring Quality of material & workInterested candidates can call me on 7767008978 or whatsapp CV on 7767008977 or mail on ravisethi@winwinsolutions.in

Job description:We are looking for a skilled and customer-focused Electrical & Electronic Service Engineer to handle installation, commissioning, maintenance, troubleshooting, and after-sales service support for industrial electrical and electronic equipment. The ideal candidate should possess strong technical knowledge, problem-solving skills, and the ability to provide prompt service support to customers.Key Responsibilities / Job DescriptionInstall, commission, and test electrical and electronic equipment at customer sites.Perform preventive and breakdown maintenance activities.Diagnose and troubleshoot electrical, electronic, and control system faults.Provide timely technical support and service assistance to customers.Conduct site visits for inspections, repairs, and equipment evaluations.Read and interpret electrical drawings, wiring diagrams, and technical manuals.Coordinate with internal teams for spare parts, technical support, and service scheduling.Prepare service reports, maintenance records, and visit reports.Ensure equipment performance and customer satisfaction through effective service support.Train customers on equipment operation, maintenance, and safety procedures.Maintain regular communication with customers regarding service activities and updates.Follow company safety procedures and industry standards during service operations.Support installation and commissioning of new equipment and systems.Requirements2 to 5 years of experience in Electrical / Electronic Service Engineering.Diploma or Bachelor's Degree in Electrical Engineering, Electronics Engineering, Electrical & Electronics Engineering, or related field.Strong knowledge of electrical circuits, control panels, motors, sensors, and industrial equipment.Ability to read and understand electrical schematics and technical documents.Good communication and customer handling skills.Willingness to travel for site visits and service assignments.Proficiency in MS Excel, MS Word, and email communication.Skills RequiredElectrical TroubleshootingElectronic Equipment ServicingPreventive & Breakdown MaintenanceTechnical SupportInstallation & CommissioningCustomer Service ManagementProblem SolvingTechnical DocumentationCommunication SkillsTime ManagementPreferred Industry ExperienceHydraulic Tools IndustryPneumatic Tools IndustryIndustrial Products IndustryEngineering IndustryManufacturing IndustryIndustrial Automation IndustryWork LocationIn PersonBenefits:Cell phone reimbursementWork Location: In person

We are seeking a motivated and detail-oriented Electrical Engineer to join our team. In this role, you will be responsible for coordinating the design, planning, and implementation of various civil engineering projects. You will work closely with senior engineers and project managers to ensure that projects are completed on time, within budget, and to the required quality standards.Experience required: max 2-3 yearsImmediate Joiners preferred (Candidates from Pune Preferred)Responsibilities

An Erection & Commissioning Engineer is an engineer responsible for:Erection (Installation)Supervising installation of industrial equipment, machinery, pipelines, electrical systems, or plant structures.Ensuring equipment is assembled according to drawings and technical specifications.Coordinating with mechanical, electrical, civil, and instrumentation teams.CommissioningTesting and starting up systems after installation.Checking performance, safety, calibration, and operational readiness.Troubleshooting issues before handing over the plant/equipment to operations.

Hiring: Service Engineer (Mechanical / Electrical) We are looking for a skilled and motivated Service Engineer to join our team.Position: Service Engineer (Mechanical / Electrical)Location: Mumbai Experience Required: 2

We are looking for a Piping Design Engineer with 1 to 3 years of experience to join our team in Pune, India. The ideal candidate will have a diploma in engineering and will be responsible for designing piping systems for various projects.Key Responsibilities:- **Design and Development**: Create detailed piping designs by using software tools and engineering principles to ensure safety and efficiency in various projects.- **System Evaluation**: Analyze existing piping systems to identify areas for improvement and recommend modifications to enhance performance and compliance with standards.- **Collaboration**: Work closely with other engineers and project teams to ensure that design specifications are met and that all components work together effectively.- **Documentation**: Prepare and maintain accurate documentation of designs, calculations, and reports to support project requirements and facilitate clear communication among team members.

Job SummaryWe are looking for a dedicated and detail-oriented Site Engineer to oversee construction activities at project sites, ensure quality work execution, and coordinate with contractors, vendors, and project teams. The candidate will be responsible for site supervision, progress monitoring, and ensuring projects are completed within timelines and safety standards.Key Responsibilities:Supervise day-to-day site activities and construction work.Ensure work is executed as per approved drawings and specifications.Coordinate with contractors, subcontractors, architects, and consultants.Monitor project progress and prepare daily/weekly reports.Ensure adherence to safety regulations and quality standards at the site.Manage material requirements and inventory at the project site.Conduct site inspections and resolve technical issues.Verify measurements and prepare bills/work completion reports.Maintain proper documentation of site activities and project records.Ensure timely completion of assigned tasks within budget and schedule.

Perform system builds, software deployment, installation, configuration, and troubleshooting of applications. Install, configure, repair, and troubleshoot desktop/laptop hardware and local & network printers. Troubleshoot hardware issues (Dell / HP / Lenovo preferred). Coordinate with vendors for hardware repair, replacement, and warranty support. Maintain IT asset inventory for laptops, desktops, accessories, and peripherals. Maintain list of all IT assets and ensure proper inventory handling. Vendor management and coordination for IT procurement and support activities.

1. QC Documentation and Coordination EngrLocation - Shahapur MIDC Salary (gross) - Rs 2 to 3.6 lakhs pa + single accommodationAll Sundays offRequiredDiploma/ BE with min. 2 years experience in QC, Inspection, Production coordination in similar static process industriesNDT ASNT Level I or II certification preferred Practical experience and knowledge of ASNT codesProficient in MS Office (Word and Excel)Job profile: Prepare/Organise/maintain complete Documentation and Dossier of Equipments with respect to Material heat chartsPrepare lab challans and follow up with technical queries with Sub-vendor/Job Worker and Customers.Checking incoming materials, vendor product bought out items and inform its result/report to store and purchase dept. and clear the MRN in time.To carry out in-process inspection according to procedures and as per approved drawing. Prepare report and raise inspection callMaintaining all the records of TPI reports, Internal IR, Material Test Certificates, etc Update & maintain online/offine Material Register/ RT Register Day to day follow up with lab and any other supplier related to technical discussionOrganise and maintain lab/RT ReportHandle emails correspondence with Sub-vendors/customers etc.______________________________________________CO PROFILEEstablished and reputed mfr/ fabricator of FRP based static process equipmentProducts - pressure vessels, heat exchangers, storage tanks, reactors, columns etc_____________________If interested, pl mail or whatsapp (9820824647) following details immediately ..1. Updated Resume2. Present/ last salary3. Reasonable expected salary4. Willing to travel to/ relocate to Shahapur5. Joining period Mail or whatsapp details to 9820824647________________________Further details will follow as per your response with details as aboveCall/ contact urgentlySHOBANARank & File consultants9820824647

Key ResponsibilitiesElectrical System Design: Design internal and external electrical layouts, including High Voltage/Low Voltage (HV/LV) power distribution networks, sub-stations, transformer sizing, and DG (Diesel Generator) backup systems.Lighting & ELV Design: Create comprehensive indoor/outdoor lighting layouts, lux level calculations, emergency lighting networks, and Extra-Low Voltage (ELV) systems (including CCTV, fire alarms, PA systems, and data networks).Engineering Calculations: Perform precise technical calculations for cable sizing, voltage drop, short circuit analysis, capacitor bank requirements, and protective earthing/lightning protection networks.Drafting & Schematics: Develop detailed 2D electrical single-line diagrams (SLDs), power schematics, conduit routing layout plans, and panel schedules using AutoCAD.BOQ & Tendering: Prepare comprehensive Bill of Quantities (BOQ), detailed material specifications, cost estimations, and technical data sheets for vendor tendering and procurement.Codes & Compliance: Ensure all electrical engineering designs strictly conform to the National Electrical Code (NEC), National Building Code (NBC), Indian Electricity (IE) Rules, and local state electricity board regulations (e.g., MSEDCL guidelines).Site Coordination: Review shop drawings submitted by electrical contractors on-site, address technical queries (RFIs), and conduct periodic site inspections to ensure installation matches design specifications.

Key Responsibilities3D Modeling & 2D Drafting: Develop highly precise 3D part and assembly models using industry-standard CAD software. Convert these models into detailed, production-ready 2D manufacturing drawings with clear geometric dimensioning and tolerancing (GD&T).Structural & Simulation Analysis: Perform Finite Element Analysis (FEA) and Computational Fluid Dynamics (CFD) to simulate stress, thermal expansion, fatigue, and fluid flow. Use this data to validate designs before physical prototyping.DFM & DFA Implementation: Apply Design for Manufacturing (DFM) and Design for Assembly (DFA) principles. Ensure components can be realistically fabricated via CNC machining, injection molding, sheet metal stamping, or casting with minimal waste.Material & Component Selection: Evaluate and select appropriate metals, plastics, or composites based on environmental stress, weight constraints, lifecycle, and cost. Research and source standard off-the-shelf components like bearings, seals, and fasteners.Prototyping & Testing: Build, inspect, and physically test functional prototypes. Document component failures, analyze root causes, and iterate designs to rectify structural or functional flaws.BOM Management: Create and maintain comprehensive Bill of Materials (BOM), design change notices (ECN), and technical design files for smooth hand-off to the procurement and assembly floor teams.

Key ResponsibilitiesBusiness Development & Lead Generation: Identify, map, and pitch to potential industrial clients, OEMs, and corporate accounts. Actively build and maintain a robust sales pipeline through cold calling, networking, and industrial site visits.Consultative Selling: Understand customers' technical pain points, specifications, and performance requirements. Recommend optimal product configurations, custom modifications, or engineering services to fit their needs.Tendering & Quotation Management: Prepare detailed technical and commercial proposals, cost estimates, and official quotations. Review complex tender documents, Request for Quotations (RFQs), and client design drafts.Commercial Negotiation: Lead negotiations regarding pricing, payment terms, delivery schedules, and service level agreements (SLAs) to secure profitable business contracts.Market Intelligence & Marketing: Conduct market research to track competitor pricing, emerging technological trends, and shifting industry demands. Assist in designing technical brochures, participating in industrial expos, and driving digital B2B marketing campaigns.Cross-Functional Coordination: Collaborate directly with internal R&D, Design, and Production teams to ensure client technical requirements are accurately translated into the final manufactured product.Account Management & Retention: Provide post-sales support, handle client grievances regarding technical performance, and coordinate with the finance team for timely payment collection.

Manufacturing, soldering, programming, testing and site installations

To market multiple products individually in property, Chemicals, and Solar products, Executives and Engineers will be preferred

Candidates should have experience in HVAC estimation

We are seeking a dedicated Production Engineer to join our team in Navi Mumbai. The ideal candidate should have 2 to 8 years of experience and hold a relevant diploma. This full-time role requires male candidates who can work from the office.**Key Responsibilities:**- **Monitor Production Processes:** Oversee daily production activities to ensure efficiency and adherence to quality standards, making adjustments as needed.- **Troubleshoot Equipment Issues:** Identify and resolve any mechanical or operational issues in the production line to minimize downtime and maintain productivity.- **Implement Production Improvements:** Analyze production data and suggest improvements to enhance output and reduce waste, contributing to the overall efficiency of operations.- **Coordinate with Teams:** Collaborate with other departments, such as quality control and maintenance, to ensure smooth production flow and address any interdepartmental challenges.- **Maintain Documentation:** Keep detailed records of production outputs, machinery maintenance, and other essential processes to ensure compliance and facilitate improvements.**Required Skills and Expectations:**Candidates must have a strong understanding of production techniques and equipment. Effective problem-solving skills are essential, along with the ability to work under pressure. Strong attention to detail and a commitment to safety standards are expected. Good communication skills will help in working collaboratively with other team members. A proactive attitude and a willingness to learn and adapt to new technologies are also important for success in this role.

1. Updated resume2. Present salary3. Reasonable expected salary4. Willing to travel to Rabale5. Earliest joining periodCall/ contact urgentlyShobanaRank & File consultants9820824647________________________________________________________________CANDIDATE PROFILE:DME/ any graduate / ITIMin. 3 years experience in purchase coordination preferably in any engineering cos./ mfg industriesGood communication skillsExperience in supplier / vendor coordinationExperience in purchase of steel items for fabrication industries preferredAge profile 25 to 35 yearsWILLING TO LEARN JOB PROFILEVendor management and follow-upPurchase negotiations and order finalisationExpense planning and trackingVendor/supplier site visits/inspectionStock auditing_________________________________________________________________