Fresher Diploma Engineer Jobs

Greeting From Vishakan Placement Service!!! Hiring Junior Process OperatorPosition: Junior Process Operator - E-Waste Chemical RecoveryDepartment: Production / Process OperationsIndustry: E-Waste Chemical RecoveryFresher Candidate OnlyQualification: ITI / Diploma/B.E Chemical Engineering, B.E Mechanical Engineering & Bsc. Chemistry background preferred.Shift Timing: 8 Hrs Rotational 1- Rotational Week-Off Reports To: Shift In-Charge / Production SupervisorJD:Handle and charge processed e-waste/raw materials into leaching tanks as per SOP and batch requirements.Handle process chemicals safely and follow approved chemical addition procedures.Operate leaching tanks, agitators, pumps, valves and chemical dosing systems.Monitor and record process parameters such as pH, temperature, level, time and agitation.Operate filter press/filtration equipment and handle slurry and filtrate safely.Collect, segregate, weigh and transfer sludge/filter cake/residues to designated areas.Assist in metal recovery processes such as precipitation, cementation or electrowinning as per SOP.Collect process samples and coordinate with QC/Lab for analysis.Maintain batch sheets, chemical consumption, production, recovery and shift records.Perform basic equipment checks and immediately report leaks, blockages, breakdowns or abnormalities.Follow PPE, EHS, chemical handling, LOTO and emergency procedures at all times.Maintain good housekeeping, 5S and cleanliness around the process area.Qualification: ITI / Diploma / 12th Science; B.E Chemical Engineering, B.E Mechanical Engineering & Bsc. Chemistry background preferred.Key Skills: Safety awareness, SOP compliance, basic chemical/process knowledge, teamwork, documentation and willingness to work in shifts.Fixed Salary:20 K CTC + ESI+ PF + Medical Insurance Overtime (OT) Policy - OT eligibility and applicable OT rates 1.5 TimesAllowances - attendance allowance, Chemical AllowancesCab / Transportation Facility - based on the timing and pick up from dedicated pointsAccommodation - Near Kandigai / Oragadam ( Company Provided)Food Facility / Meal Allowance - BF, Lunch and Dinner based shift basis and We provided on subsidy for the foodNo of openings: 35 Male candidate only Interview Process: HR Round-Technical Round Immediate Joiner Must Work Location:, Oragadam, Ezhichur Village(Sriperumpudur Taluk,Kanchipuram(DT) - 603 204)If Candidate Interested For Job Please Call Immediately & share your Cvs Call/Whatsapp: Vishakan Placement Service HR Pradeep jobvpservice@gmail.com

We are looking for a Fabrication Engineer to join our team in Surat. This entry-level position is suitable for candidates with a diploma in engineering and requires a passion for fabrication processes and techniques.Key Responsibilities:- Design and Develop Fabrication Plans: Create detailed plans for various fabrication projects, ensuring they meet specifications and industry standards.- Conduct Material Selection: Choose appropriate materials for fabrication based on project requirements, considering factors like strength, durability, and cost-effectiveness.- Oversee Fabrication Processes: Monitor and assist in the manufacturing process, ensuring that all operations are carried out efficiently and safely.- Quality Control Checks: Perform regular inspections of fabricated items to ensure they meet quality standards and project specifications, making adjustments as necessary.- Collaboration and Communication: Work closely with other engineers and team members to discuss project progress and address any issues or challenges that arise.Required Skills and Expectations:The ideal candidate should have a diploma in engineering and some basic understanding of fabrication techniques and tools. You should be able to read technical drawings and specifications clearly. Strong problem-solving skills and attention to detail are essential, as youll need to manage multiple projects while maintaining high quality. Good communication skills are important for working effectively with your team. A willingness to learn and develop skills in fabrication processes is expected, along with the ability to work in a fast-paced, hands-on environment.

We are looking for a Civil Engineer to join our team in Bilaspur, Chhattisgarh. This role is ideal for fresh graduates with a diploma in civil engineering who are eager to start their careers in a dynamic environment.Key Responsibilities:- Design and Planning: Assist in creating plans and designs for various construction projects, ensuring they meet local and national standards.- Site Supervision: Help monitor construction sites to ensure that the work is being done according to specifications and timelines, providing support to senior engineers.- Material Management: Assist in selecting and sourcing construction materials, ensuring they meet quality standards and are used efficiently.- Project Documentation: Maintain accurate records of project progress, changes, and communications, which helps keep the project on track.- Collaboration: Work closely with architects, construction teams, and clients to ensure smooth project execution and address any issues that arise.The ideal candidate should have a diploma in civil engineering and a keen interest in building and construction. Strong communication skills are essential for collaborating with various teams, and basic knowledge of design software will be a plus. The candidate should be eager to learn, detail-oriented, and able to work well under supervision. This role requires commitment to deadlines and a proactive attitude toward problem-solving.

JOB TITLE: CMM PROGRAMMER Department: Quality Control / InspectionLocation: Hosur, Chennai, BangaloreJob Type: Full-timeExperience Required: 0 - 5 yearsReports To: Quality Manager Job Summary:We are seeking a skilled and detail-oriented CMM Programmer cum Operator to join our quality assurance team. The ideal candidate will be responsible for programming, setting up, and operating Coordinate Measuring Machines (CMM) to inspect precision components and ensure they meet design specifications and quality standards.Key Responsibilities:Create and modify CMM programs using software such as PC-DMIS / Calypso / Mitutoyo MCOSMOS (as applicable).Set up and operate CMM machines to inspect first articles, in-process, and final components.Interpret engineering drawings and GD&T (Geometric Dimensioning and Tolerancing) requirements.Analyze inspection results and generate detailed reports.Perform routine maintenance and calibration checks on CMM machines.Collaborate with engineering, production, and quality teams to resolve any inspection-related issues.Maintain proper documentation and ensure compliance with standards.Train and support junior inspectors/operators when required.Requirements:Diploma / Degree in Mechanical Engineering or a related field.Proven experience as a CMM Programmer and Operator.Strong knowledge of metrology, quality systems, and GD&T.Hands-on experience with CMM software (mention which one specifically if required).Familiarity with other inspection tools such as vernier calipers, micrometers, height gauges, etc.Good communication skills and ability to work independently and in a team.Strong attention to detail and analytical skills.Preferred Skills (Optional):Experience in aerospace/automotive/precision engineering industries.Basic knowledge of CNC machining or other manufacturing processes.Exposure to statistical process control (SPC) and quality improvement tools

SERVICE ENGINEERRole: Service EngineerLocation: RajapalayamEligibilityAge: 21-40 yearsQualification: ITI / Diploma / UG DegreeBike & Valid Driving License: MandatoryWillingness to learn and continuously upgrade technical skillsGood customer service and communication skillsKey ResponsibilitiesDiagnose and troubleshoot hardware and software issues.Perform service, repair and installation activities.Use diagnostic tools and follow service procedures.Identify and replace faulty parts.Maintain service reports and job records.Ensure customer satisfaction and timely service completion.Continuously update product and technical knowledge.Preferred SkillsTroubleshooting Electronics & PCB Basics Software/Firmware Diagnostic Tools Parts Knowledge Customer Handling Warranty & Service Process IoT/Smart DevicesOffice LocationSpot Care Engineering24C, Velayutham Road,Behind Lovely Offset,Near Karuppasamy Cutting,Sivakasi - 626123, Tamil Nadu, IndiaContact: 8344422258Email: info@spotcareengineering.comEmail: spotcareengineering@gmail.com

We are seeking a motivated and detail-oriented Junior Engineer Electrical to join our team in Coimbatore. This is an entry-level position ideal for fresh graduates or those with up to one year of experience.Key Responsibilities:- Assist in Electrical Projects: Support senior engineers in planning and executing electrical projects, helping ensure that all tasks are completed on time and within budget.- Perform Testing and Maintenance: Conduct routine tests and maintenance on electrical systems, identifying any issues early and ensuring smooth operation.- Prepare Technical Documentation: Create and maintain detailed reports, drawings, and specifications for electrical projects to ensure all information is accurately recorded.- Collaborate with Team Members: Work closely with engineers and other team members, sharing ideas and best practices to improve project outcomes.- Follow Safety Standards: Adhere to all safety regulations and protocols while working to maintain a safe working environment.Required Skills and Expectations:- Educational Background: A diploma in Electrical Engineering or a related field is required.- Technical Knowledge: Basic understanding of electrical systems, tools, and technologies, along with a willingness to learn more.- Problem-Solving Skills: Ability to troubleshoot and resolve electrical issues effectively.- Attention to Detail: Highly organized with a strong focus on accuracy and quality in work.- Team Player: Strong communication and interpersonal skills to work well within a team. Candidates should be ready for a full-time office environment and willing to grow and develop their skills in the electrical engineering field.

As a Civil Design Engineer intern, you will be responsible for assisting in the design and planning of various civil engineering projects. This role is suitable for candidates with a diploma in civil engineering and offers an excellent opportunity to gain practical experience in the field.Key Responsibilities:- Drafting Design Plans: Assist in creating detailed design plans using computer-aided design (CAD) software, ensuring accuracy and adherence to project specifications. - Site Analysis: Participate in site visits and analyze the conditions and requirements of construction sites to inform design decisions.- Collaboration with Teams: Work closely with senior engineers and other team members to develop effective design solutions and share ideas. - Preparation of Reports: Help prepare technical reports and documentation, summarizing design processes, findings, and recommendations for projects. - Compliance Checks: Conduct quality checks to ensure designs comply with relevant regulations, safety standards, and best practices in civil engineering. Required Skills and Expectations:Candidates should have a strong foundation in civil engineering principles. Familiarity with design software like AutoCAD is preferred. Good analytical and problem-solving skills are essential for assessing project requirements effectively. Additionally, interns must demonstrate excellent communication and teamwork abilities, as collaboration with various team members is crucial. A proactive approach to learning and completing tasks within deadlines will be highly valued in this role. Candidates should be open to feedback and eager to grow professionally within a supportive environment.

Required QualificationsBachelor's Degree in Computer Science, Information Technology, Electronics, or a related field.Basic knowledge of Windows/Linux operating systems.Understanding of networking concepts such as TCP/IP, DNS, DHCP, and LAN/WAN.Familiarity with hardware troubleshooting and system administration.Strong analytical and problem-solving skills.Good verbal and written communication skills.

Job Title: Production Trainee - Fresher (D.Pharm / B.Sc / Diploma Chemical) Pharmaceutical Company, Butibori MIDC, NagpurJob Role: Production TraineeLocation: Butibori MIDC, Nagpur, Maharashtra

We are looking for an enthusiastic Electrical Engineer to join our team in Tundla. This is a full-time position suitable for candidates with 0 to 2 years of experience, and a diploma in electrical engineering is required.Key Responsibilities:- Design Electrical Systems: Create and analyze electrical systems for various projects, ensuring they meet industry standards and safety regulations.- Conduct Testing: Perform tests on electrical components and systems to verify their performance, reliability, and efficiency.- Troubleshoot Issues: Identify and resolve electrical problems in existing systems, offering practical solutions to enhance functionality.- Collaborate with Teams: Work closely with other engineers and project teams to ensure integration of electrical components with overall project designs.- Document Findings: Keep detailed records of designs, tests, and issues, providing clear reports for team members and higher management.Required Skills and Expectations:- Technical Knowledge: A solid understanding of electrical engineering principles and practices, supported by a diploma.- Problem-Solving Skills: Ability to analyze issues critically and develop effective solutions in a timely manner.- Communication Skills: Strong verbal and written communication skills to interact with team members and document findings clearly.- Attention to Detail: Precision in designing systems and conducting tests to ensure error-free results.- Team Player: Willingness to collaborate with diverse teams and contribute positively to the work environment. The ideal candidate is motivated and eager to learn, ready to take on challenges in the electrical engineering field.

* Create and modify 2D & 3D mechanical designs using Creo Parametric.* Prepare detailed engineering drawings as per requirements.* Understand and apply basic GD&T.* Assist in product/tool design and development.* Make design modifications based on customer and production requirements.* Coordinate with Production and Quality teams for design-related issues.* Maintain design drawings, revisions and technical documentation.Required Skills:* Creo Parametric

Greeting From Vishakan Placement Service !!! Hiring Junior Process Operator Technician (Fresher Graduate)Position: Junior Process Operator Technician - E-Waste Chemical RecoveryDepartment: Production / Process OperationsIndustry: E-Waste Chemical RecoveryShift Timing: 8 Hrs Rotational 1- Rotational Week-Off Reports To: Shift In-Charge / Production SupervisorJD:Handle and charge processed e-waste/raw materials into leaching tanks as per SOP and batch requirements.Handle process chemicals safely and follow approved chemical addition procedures.Operate leaching tanks, agitators, pumps, valves and chemical dosing systems.Monitor and record process parameters such as pH, temperature, level, time and agitation.Operate filter press/filtration equipment and handle slurry and filtrate safely.Collect, segregate, weigh and transfer sludge/filter cake/residues to designated areas.Assist in metal recovery processes such as precipitation, cementation or electrowinning as per SOP.Collect process samples and coordinate with QC/Lab for analysis.Maintain batch sheets, chemical consumption, production, recovery and shift records.Perform basic equipment checks and immediately report leaks, blockages, breakdowns or abnormalities.Follow PPE, EHS, chemical handling, LOTO and emergency procedures at all times.Maintain good housekeeping, 5S and cleanliness around the process area.Qualification: ITI / Diploma / 12th Science; B.E Chemical Engineering, B.E Mechanical Engineering & Bsc. Chemistry background preferred.Experience: 0-4 years in chemical/process plants, metal recovery, e-waste recycling or related industries; freshers may be considered.Key Skills: Safety awareness, SOP compliance, basic chemical/process knowledge, teamwork, documentation and willingness to work in shifts.Fixed Salary:20 K CTC + ESI+ PF + Medical Insurance Overtime (OT) Policy - OT eligibility and applicable OT rates 1.5 TimesAllowances - attendance allowance, Chemical AllowancesCab / Transportation Facility - based on the timing and pick up from dedicated pointsAccommodation - Near Kandigai / Oragadam ( Company Provided)Food Facility / Meal Allowance - BF, Lunch and Dinner based shift basis and We provided on subsidy for the foodNo of openings: 35 Male candidate only Interview Process: HR Round-Technical Round Immediate Joiner Must Work Location:, Oragadam, Ezhichur Village(Sriperumpudur Taluk,Kanchipuram(DT) - 603 204)If Candidate Interested For Job Please Call Immediately & share your Cvs Call/Whatsapp: Vishakan Placement Service HR Pradeep jobvpservice@gmail.com

We are looking for an Engineer Trainee to join our team in Salem. This is a full-time, office-based role suitable for fresh diploma graduates or those with minimal work experience. The ideal candidate should be male, eager to learn, and ready to develop their engineering skills.Key Responsibilities:- Assist Senior Engineers: You will work closely with senior engineers to learn about project designs and implementations, gaining firsthand experience in the engineering field.- Participate in Testing: You will help conduct tests and experiments to ensure that products meet quality standards, enabling you to understand the practical applications of theoretical knowledge.- Document Findings: You will record test results and project statuses, which helps in maintaining organized records for analysis and future reference.- Support Project Development: You will assist in the development of engineering projects by providing necessary data and support, enhancing your project management skills.- Learn Engineering Software: You will be trained to use software tools relevant to the engineering tasks, which is essential for modern engineering practices.Required Skills and Expectations:- A diploma in engineering is mandatory, ensuring you have the foundational knowledge needed for this role.- Basic understanding of engineering principles and practices is essential.- Strong problem-solving skills will be critical to address challenges you may encounter.- Good communication skills are necessary to collaborate effectively with the team.- A willingness to learn and adapt in a fast-paced environment will help you grow in this role.

We are looking for a dedicated Production Engineer based in Shirwal. This is a full-time office position suitable for candidates with 0 to 2 years of experience in engineering. Ideal applicants should hold a diploma and be male.Key Responsibilities:- Oversee Production Processes: Monitor and optimize manufacturing processes to ensure efficiency and quality standards are met.- Troubleshoot Mechanical Issues: Identify and resolve technical problems that arise during production to minimize downtime and maintain workflow.- Collaborate with Team Members: Work closely with other engineers and workers to ensure smooth operations and to facilitate communication between departments.- Conduct Quality Control Checks: Implement regular checks and tests on products to maintain high-quality standards and compliance with safety regulations.- Document Production Data: Maintain accurate records of production metrics, issues, and improvements to help in future analysis and decision-making.Required Skills and Expectations:Candidates should have a solid understanding of production techniques and engineering principles. Proficiency in using standard engineering software and tools is essential. Good problem-solving skills are necessary for addressing production challenges quickly and efficiently. The ideal candidate should be a strong communicator, able to work well in a team, and possess a keen attention to detail for quality assurance. Willingness to learn and adapt to new technologies and processes is also important for success in this role.

We are looking for a Diploma Trainee Engineer to join our team in Bindayaka, Jaipur. This is an exciting opportunity for recent graduates or those with up to five years of experience who wish to develop their skills in a practical work environment. Key Responsibilities:1. Assisting in Projects: Support senior engineers in various projects, contributing to tasks such as planning, design, and execution to ensure project milestones are met on time.2. Learning Technical Skills: Gain hands-on experience with technical tools and software used in the engineering field, enhancing your knowledge and professional growth.3. Conducting Research: Participate in research activities to gather data and analyze information, helping the team to identify solutions to engineering problems.4. Documentation and Reporting: Maintain accurate records of project activities, prepare reports, and present findings to the team, ensuring transparent communication about progress.5. Quality Control: Assist in monitoring ongoing projects for compliance with engineering standards and specifications, helping to uphold quality in all processes.Required Skills and Expectations:Candidates should possess a Diploma in Engineering and have a strong foundation in core engineering principles. Good communication skills are essential for effective teamwork. A willingness to learn and adapt to new challenges is crucial. Applicants should also be detail-oriented and able to manage tasks efficiently in a dynamic work environment. The role is open to male candidates only.

Key ResponsibilitiesPlan and execute preventive, predictive, and breakdown maintenance activities.Diagnose equipment faults and implement corrective actions.Monitor machine performance and recommend improvements to enhance reliability.Maintain records of maintenance activities, repairs, and spare parts inventory.Coordinate with production teams to minimize downtime and optimize equipment utilization.Ensure timely servicing of plant machinery, utilities, and equipment.Manage spare parts procurement and inventory control.Implement TPM, 5S, and continuous improvement initiatives.Ensure compliance with safety standards and maintenance procedures.Support installation, commissioning, and modification of machinery and equipment.

Key ResponsibilitiesPlan and execute preventive, predictive, and breakdown maintenance activities.Diagnose equipment faults and implement corrective actions.Monitor machine performance and recommend improvements to enhance reliability.Maintain records of maintenance activities, repairs, and spare parts inventory.Coordinate with production teams to minimize downtime and optimize equipment utilization.Ensure timely servicing of plant machinery, utilities, and equipment.Manage spare parts procurement and inventory control.Implement TPM, 5S, and continuous improvement initiatives.Ensure compliance with safety standards and maintenance procedures.Support installation, commissioning, and modification of machinery and equipment.

Key ResponsibilitiesPrepare and revise 2D and 3D drawings using AutoCAD.Develop detailed engineering, manufacturing, architectural, or construction drawings as required.Interpret technical specifications, sketches, and design requirements.Coordinate with project teams to ensure drawing accuracy and compliance with standards.Prepare layouts, sectional views, and fabrication drawings.Maintain drawing records, revisions, and documentation.Conduct site measurements and incorporate changes into drawings when required.Ensure drawings comply with applicable codes, standards, and project specifications.Support project execution by providing technical drafting assistance.

As a CNC Operator, you will be responsible for operating and overseeing CNC machinery to create precision parts and products. This is a full-time position based in Tiruvallur.Key Responsibilities:- Set Up CNC Machines: Prepare machines for production by installing and aligning tools, fixtures, and workpieces according to specifications.- Read Technical Drawings: Examine blueprints and technical drawings to understand project specifications and ensure accurate production.- Monitor Machine Operations: Keep an eye on the performance of CNC machines during operation, making adjustments as needed to maintain quality.- Conduct Quality Checks: Use measuring tools to inspect finished products and ensure they meet required specifications and tolerances.- Maintain Equipment: Regularly clean and perform basic maintenance on machines to ensure they operate efficiently and safely.- Collaborate with Team: Communicate effectively with team members and supervisors to report issues, suggest improvements, and stay informed on project updates.Required Skills and Expectations:- A diploma in mechanical engineering or a related field is required, providing foundational knowledge for the role.- Familiarity with CNC machinery and tools is essential. Prior experience is a plus but not mandatory, as training will be provided.- Good attention to detail and precision to produce high-quality parts is crucial.- Basic problem-solving skills to troubleshoot minor machine issues are important.- Ability to work effectively in a team environment and communicate clearly with colleagues. Candidates should be eager to learn and adapt in a fast-paced manufacturing setting.

We are an authorized Channel Partner of Amara Raja Power Systems and are engaged in the Operation & Maintenance (O&M) of IPS (Integrated Power Supply) systems used for Railway Signalling applications. We are looking for suitable candidates for the position of IPS Maintenance & Operation Technician/Engineer.The candidate will be responsible for operation, routine maintenance, preventive maintenance, fault finding, troubleshooting, testing and servicing of IPS systems and associated signalling power supply equipment at railway installations. Candidates with experience in Railway Signalling, IPS, battery systems, electrical/electronic maintenance or power supply systems will be preferred.

Greeting From Vishakan Placement Service Hiring ITI- Diploma mechanical candidate For Quality Engineer & Quality Online Inspection (Dy.Technician) Position in our leading Automotive Industry Tiruvallur Industry:Automotive Industry,Sheet Metal, Machining and Manufacturing Industry- Automobile component manufacture Role : Quality Online Inspection(Dy.Technician) Qualification: ITI/Diploma/B.E-B.Tech Mechanical/AutomobileExperience : Quality Online Inspection (2-4 Yrs) Skills: Strong knowledge in Quality Online inspection knowledge, good attitude and behavior, willing to work rotational shift Fixed Salary: 15K-18k Inhand -Fresher #Quality Online Inspection-20 K-30 K CTC+ESI+PF Benefits(Experience)Shift Timing : 06.00 am to 2.30 pm - 1st shift02.00pm to 09.50 pm - 2nd shift 09.50pm to 06.00am - 3rd shift 09.00 am to 05.30 pm & General shift Sunday Week OffTransport Facilities: Thiruvallur Railway StationThiruninravur Railway stationNo of openings: 50+Interview Schedule : Monday - Saturday / 10 AM- 12 PM & 2 PM-4 PM Interview Timing Interview Process: Direct Walkin Interview- HR Round - Technical Round - MD Round Immediate Joiner Must Work Location : Tiruvallur Candidate Preferred Location: Thiruvallur,Thirumazhisai,Poonamallee,Veppampattu,Thiruniravur, Sriperumbudur, thirumudivakkam,nemili,manavalanagar.Interested Candidate For Job Please kindly call immediately HR Pradeep -Vishakan Placement Service

We are looking for a Production Maintenance Engineer to join our team based in Butibori. The ideal candidate will oversee the maintenance of production machinery and ensure processes run smoothly. Key Responsibilities:- Equipment Maintenance: Regularly perform inspections and preventive maintenance on production machinery to minimize downtime and ensure operational efficiency.- Troubleshooting Issues: Identify and resolve mechanical problems in equipment promptly to maintain production schedules and meet targets.- Technical Support: Provide technical assistance and support to the production team, ensuring they understand proper machinery operation.- Documentation: Maintain accurate records of maintenance activities, repairs, and inventory of spare parts, ensuring compliance with company standards.- Collaboration: Work closely with other departments to coordinate maintenance activities and support production demands seamlessly.Required Skills and Expectations:Candidates should have a degree or diploma in engineering, ideally with a focus on maintenance or mechanical engineering. A solid understanding of machinery and experience in troubleshooting is essential. Good communication skills are necessary for effective teamwork.Attention to detail and problem-solving abilities are crucial for this role. Candidates must be able to work independently and exhibit a proactive attitude towards learning and improvement. A willingness to work a full-time schedule is expected, along with the ability to thrive in a fast-paced work environment.

We are Hirring Junior Estimation Engineer Female Candidates for Pharma Company located in Nagpur, Maharashtra!!!Job role: Estimation Engineer/ Quotation ExecutiveEducation: Bachelors Degree in Electrical Engineering or Mechanical EngineeringExperience: Freshers are welcome (internship or project experience is an advantage)Salary: Rs.15,000 - Rs.22,000Job location: Kamptee road, NagpurNote: Female candidates required only for this job roleSkills Required:Basic knowledge of electrical / mechanical engineering concepts.Ability to read and understand basic engineering drawings.Good knowledge of MS Excel and MS Office.Strong willingness to learn costing, estimation, and quotation processes.Good communication and coordination skills.Key Responsibilities:Quotation & Estimation SupportAssist in preparing technical and commercial quotations based on RFQs and customer requirements. Help in preparing Bill of Quantities (BOQ) and cost sheets under guidance of senior engineers.Support cost estimation for materials, components, and basic labor. Technical UnderstandingStudy and understand electrical / mechanical drawings, layouts, and specifications.Assist in basic technical calculations and documentation.Ensure quotations meet technical and quality standards. Coordination & LearningCoordinate with Sales, Procurement, and Engineering teams for pricing and technical inputs.Communicate with vendors to collect basic quotations and datasheets.Learn about industry standards, codes, and best practices. Documentation & ReportingMaintain quotation files, cost records, and supporting documents.Update trackers and reports related to quotations and tenders.For more details call us on 7517361633