Diploma Engineer Job Vacancies in Chennai

Design EngineerQualif: DME / BE MechExp : 5 to 8 YearsExperience in Industry dealing with products such as Metaldoors, Rolling Shutters, Industrial Doors, Handrails, Balustrade,, SST Cladding,Location : Poonamalle, Chennaiapply to bindhu@simho.in

Greeting From Vishakan Placement Service !!!Walkin interview For Quality Management System (QMS) Manager PositionPosition: Quality Management System (QMS) ManagerExperience: Minimum 5 yearsIndustry: electrical component/Automotive / ManufacturingPosition SummarySharpwire is looking for an experienced QMS Manager to lead and strengthen our Quality Management System, ensure compliance with IATF 16949 requirements, and drive continuous improvement across manufacturing and quality processes.The ideal candidate must have a minimum of 5 years of hands-on IATF 16949 audit experience, with strong exposure to internal audits, customer audits, certification audits, corrective actions, defect reduction, and quality performance monitoring.Key ResponsibilitiesQMS & IATF 16949* Lead and maintain the companys IATF 16949 Quality Management System.* Ensure compliance with applicable customer-specific requirements and quality standards.* Plan and conduct internal QMS and process audits.* Lead preparation for IATF, customer, and certification-body audits.* Ensure timely closure and effectiveness verification of audit findings and non-conformities.* Maintain QMS documentation, procedures, work instructions, records, and quality objectives.Defect Reduction & Quality Improvement* Drive initiatives to reduce internal and external defects, rejection, rework, scrap, and customer complaints.* Monitor quality KPIs and identify areas requiring immediate corrective or preventive action.* Lead Root Cause Analysis, 8D, CAPA, 5-Why, Fishbone, and other problem-solving activities.* Establish and monitor defect-reduction targets for production and supporting functions.* Work closely with Production, Engineering, Maintenance, and Supply Chain teams to eliminate recurring quality issues.Quality Trend Analysis* Track quality defects and trends by product, process, machine, shift, customer, supplier, and defect type.* Develop and maintain Pareto analysis, trend charts, rejection reports, and quality dashboards.* Identify recurring and emerging quality trends and initiate preventive actions before issues become major problems.* Present quality performance, trends, risks, and improvement actions to management.* Use data-driven analysis to identify opportunities for continuous improvement and defect prevention.Customer Quality* Monitor and manage customer complaints and quality concerns.* Ensure effective and timely response to customer complaints, including 8D reports and corrective actions.* Track customer PPM, complaints, returns, and other customer quality indicators.* Work with relevant teams to prevent recurrence of customer issues.Continuous Improvement* Drive PDCA and continual improvement activities throughout the organization.* Establish quality improvement projects focused on defect reduction, process capability, and customer satisfaction.* Promote a strong zero-defect and prevention-oriented quality culture.* Monitor the effectiveness of corrective and preventive actions.Team & Cross-Functional Leadership* Lead and develop the Quality team.* Train employees on QMS requirements, quality procedures, problem-solving, and audit readiness.* Coordinate with cross-functional teams to resolve quality issues.* Ensure accountability for quality objectives and improvement actions across departments.Required Qualifications & Experience* Bachelors degree/Diploma in Mechanical, Electrical, Industrial Engineering, Quality, or related field.* Minimum 5 years of hands-on IATF 16949 audit experience - mandatory.* Strong experience in IATF 16949 QMS implementation, maintenance, and auditing.* Experience handling IATF certification audits, customer audits, and internal audits.* Strong knowledge of:* IATF 16949* ISO 9001* Core Tools - APQP, PPAP, FMEA, MSA, SPC* 8D / CAPA / Root Cause Analysis* Process and Product Auditing* Control Plans* Statistical and trend analysis* Proven track record of reducing defects, rejection, scrap, rework, and customer complaints.* Strong analytical and problem-solving skills.* Good communication and leadership skills.* Proficiency in Excel and quality data analysis/reporting.Preferred* Automotive manufacturing experience.* Experience with wire, cable, harness, metal forming, stamping, or related manufacturing processes.* Certified IATF 16949 Internal Auditor / Lead Auditor.* Experience with customer-specific requirements and major automotive customer audits.* Experience implementing measurable quality improvement projects.Key Performance Indicators (KPIs)The QMS Manager will be responsible for driving measurable improvement in:* Internal rejection / defect PPM* Customer PPM* Customer complaints* Scrap and rework* Repeat defects* Audit non-conformities* Corrective-action closure effectiveness* Process audit compliance* Supplier quality performance* Cost of Poor Quality (COPQ)* Overall QMS effectivenessSuccess in This RoleSuccess will be measured by the ability to maintain a robust IATF 16949 QMS, achieve strong audit performance, identify quality trends early, eliminate recurring defects, reduce overall rejection and customer complaints, and establish a culture of prevention and continuous improvement at Sharpwire.If you want, I can also make this more aggressive and KPI-driven for hiring, including specific targets such as 30% defect reduction, zero repeat customer complaints, audit score targets, and PPM reduction.Salary : As Per Company Standard Interview Round : Technical Round Job Shift : DAY (8.15AM -6.00PM) , NIGHT( 9.00PM -7.15AM)/ Sunday Week-offNo of openings: 3 Immediate Joiner must Work Location: THANDALAM MANNUR VILLAGE Papparapakkam Candidate nearby Location: Sriperumbedur, Kanchipuram, poonamallee,thirumazhisai Vellavedu,Veppampattu,Sevvapet,thiruninravur,poonamallee,Interested Candidate For Job Please Call immediately & Share your ResumePradeep HR +91 955 195 2508 (jobvpservice@gmail.com)

Greeting From Vishakan Placement ServiceHiring ITI - Diploma mechanical For Quality Engineer (Dy.Technician) /Quality Online Inspection (Dy.Technician)(Fresher & Experience) Position in our leading Automotive Industry Ambattur.Industry:Automotive Industry,Sheet Metal, Machining and Manufacturing Industry- Automobile component manufactureRole : Quality line inspector Quality Online Inspection(Dy.Technician)Qualification: ITI/Diploma/B.E-B.Tech Mechanical/AutomobileFresher candidate & Experience: Quality Online Inspection (2-4 Yrs)Skills: Strong knowledge in Quality Online inspection knowledge, good attitude and behavior, willing to work rotational shift.Fixed Salary: 18k Inhand (Fresher Candidate)/Quality Online Inspection-20 K-30 K CTC+ESI+PF Benefits (Experience)Shift Timing : 08.30 am-5pm (2hrs O.T)- General shift Sunday Week OffNo of openings: 50Interview Schedule : Monday - Saturday / 10 AM- 12 PM & 2 PM-4 PM Interview TimingInterview Process: Direct Walkin Interview- HR Round - Technical Round - MD Round Immediate Joiner MustWork Location : Ambattur Chennai Employment ServicesCandidate Preferred Location: Avadi, Pattabiram, Puzhal, Redhills,Thirumullaivoyal,Interested Candidate For Job Please kindly call immediately

We are looking for a qualified and experienced Site Engineer (Civil) to supervise and manage day-to-day construction activities at project sites. The candidate will be responsible for ensuring that work is carried out according to approved drawings, specifications, quality standards, safety requirements, and project schedules.

We are seeking a dedicated Civil Site Engineer to join our team in Chennai. This role is suitable for candidates with 0 to 6 years of experience and Diploma / Bachelor Degree in civil engineering. The Civil Site Engineer will play an essential role in overseeing construction projects from start to finish.Key Responsibilities:1. Site Supervision: Monitor daily construction activities to ensure compliance with project specifications and safety standards. You will work closely with workers and subcontractors to ensure timelines are met.2. Project Planning: Assist in the preparation of construction plans and schedules, ensuring that all phases of the project are efficiently coordinated to meet deadlines.3. Quality Control: Conduct regular inspections of materials and workmanship on-site. You will ensure all work is performed to the required quality and standards.4. Reporting: Maintain accurate records of site progress and report any issues or delays to the project manager. Clear communication is vital to keep the project on track.5. Collaboration: Work closely with architects, engineers, and other construction professionals to ensure smooth project execution and resolve any design-related concerns.Required Skills and Expectations:You should have a solid understanding of civil engineering principles and practices. Strong problem-solving abilities and attention to detail are crucial. Excellent communication skills are needed to effectively liaise with team members and stakeholders. A positive attitude and the ability to work in a team are essential for success in this role.

We are looking for an Electronics Engineer with 1 to 3 years of experience to join our team in Chennai. The ideal candidate will have a diploma in electronics and be eager to contribute to innovative projects.Should experience in PCB Board soldering Key Responsibilities:1. Design and Development: You will create and improve electronic circuits and systems, ensuring they meet design specifications and performance standards.2. Testing and Evaluation: Perform tests on electronic components and systems. You will analyze data and troubleshoot issues to guarantee functionality and reliability.3. Collaboration: Work closely with other engineers and teams to integrate electronic systems with software and mechanical parts, promoting effective product development.4. Documentation: Maintain clear and detailed records of design specifications, testing procedures, and project updates to ensure compliance and future reference.5. Technical Support: Provide assistance and guidance on electronic systems to staff and customers, resolving issues and answering queries to enhance user satisfaction.Required Skills and Expectations:The successful candidate should have a solid understanding of electronics principles and strong problem-solving skills. Familiarity with design software, testing equipment, and circuit analysis is essential. Excellent communication and teamwork abilities are crucial, as you will collaborate with diverse teams. Attention to detail and a proactive approach to learning new technologies will be highly regarded.

We are looking for an Estimation Engineer to join our team in Chennai. The ideal candidate will have 1 to 7 years of experience and a diploma in a relevant field. This is a full-time position, and work will be conducted from our office.Key Responsibilities:- Prepare Cost Estimates: Analyze project specifications and prepare detailed cost estimates to ensure accurate budgeting for projects.- Analyze Blueprints and Drawings: Review project plans, blueprints, and drawings to identify materials and labor required, ensuring all aspects of the project are covered.- Coordinate with Stakeholders: Communicate with project managers, architects, and clients to gather information that is crucial for preparing precise estimates.- Evaluate Subcontractor Quotes: Collect and assess quotes from subcontractors and suppliers to ensure competitive pricing and adherence to project specifications.- Maintain Documentation: Organize and maintain all estimation documents and reports, ensuring they are up to date and accessible for future reference.- Assess Risks: Identify potential risks and issues related to costs and provide recommendations to mitigate these risks.Required Skills and Expectations:Candidates should have strong analytical skills, enabling them to make accurate assessments of project costs. Excellent communication skills are essential for effective collaboration with various stakeholders. Proficiency in estimation software and tools is expected, along with a solid understanding of construction methods, materials, and regulations. Attention to detail is crucial, as minor errors can lead to significant budget implications. The candidate should be able to work independently while also thriving in a team-oriented environment.

We are looking for a dedicated Quality Checker to join our team in Padi, Chennai. The ideal candidate will be responsible for ensuring that products meet defined quality standards and specifications. Key Responsibilities: - Inspect Products: Regularly examine products during the manufacturing process to confirm they meet quality standards and specifications. - Document Findings: Keep accurate records of inspections, noting any defects or issues for tracking and reporting purposes. - Collaborate with Teams: Work closely with production teams to address quality concerns and suggest improvements. - Conduct Tests: Carry out tests and checks on products to verify functionality and compliance with safety regulations. - Maintain Cleanliness: Ensure that the workspace is clean and organized, promoting a safe and efficient working environment.Required Skills and Expectations: Candidates must hold a diploma and have 1-7 years of relevant experience in quality control or assurance. Familiarity with inspection tools and techniques is essential. Attention to detail and strong observational skills are crucial for identifying defects. The right candidate should be a team player, capable of communicating clearly with coworkers, and committed to maintaining high quality standards. This position is full-time and requires a male candidate to comply with specific company policies.

EHS Asst Manager Experienced EHS Leadership RoleJob DescriptionExperience: 5 to 8 yrsSalary: Based on Company NormsEducation: Diploma/BE in MechLocation: In And Around ChennaiYour Duties:Ownership of the EHS Management System: Manage and continuously improve the plant's ISO systems, write standard operating procedures, and lead the site through customer and external compliance registrar audits.Mould Change & Rigging Safety Auditing: Ensure that overhead cranes, hoist rings, and magnetic clamping platforms are audited, load-tested, and operated safely by supervising and approving safety criteria during high-risk tool changes.Hazard Identification & Risk Assessment: Oversee regular shop floor inspections and create thorough HIRA and Job Safety Analysis files for each injection molding workstation, material drying system, and post-molding assembly loop.Incident Investigation & Root-Cause Analysis: Lead the investigation panel for any occurrences involving property damage, minor injuries, or near-misses. Use Fishbone or 5-Why frameworks to implement effective corrective measures.Lockout/Tagout (LOTO) Program Governance: To ensure safe isolation during mechanical maintenance or heating band changes, create, audit, and rigidly enforce equipment-specific LOTO profiles for each injection molding machine and auxiliary unit.Upgrades for Industrial Ergonomics and Machine Guarding: To remove crush or burn risks, inspect machine safety gates, light curtains, emergency stop circuits, and mechanical interlocks across automated robot pick-and-place lines.Candidate Application:Full Name: Contact Number: Email Address: Current Location: Position Applied For: Qualification: Year of Passout: Candidate Category: Fresher / ExperiencedWillingness to Relocate: Yes / NoTotal Years of Experience: (If applicable) Current/Last Drawn Salary (Monthly/Annual): Notice Period:We invite you to apply and explore this exciting opportunity!Warm Regards,HR - Maria

Job Title: PEB Project EngineerLocation: Chennai / Site LocationExperience: 3-8 YearsIndustry: Pre-Engineered Buildings (PEB) / Structural SteelJob SummaryWe are looking for an experienced PEB Project Engineer to manage the execution of Pre-Engineered Building projects from site mobilization to project completion. The candidate should coordinate with clients, consultants, vendors, and site teams to ensure timely, safe, and quality project delivery.Key ResponsibilitiesPlan, execute, and monitor PEB erection activities.Coordinate with design, fabrication, logistics, and site teams.Prepare project schedules and monitor progress.Supervise site engineers, supervisors, and subcontractors.Ensure quality standards and safety regulations are followed.Verify drawings and resolve technical issues at site.Coordinate material receipt and inventory at site.Conduct daily progress meetings and prepare MIS reports.Monitor project costs and control material wastage.Handle client, consultant, and contractor coordination.Ensure timely project completion within budget.Prepare billing measurements and project documentation.Conduct inspections, punch point clearance, and project handover.Required SkillsStrong knowledge of PEB steel structures.Experience in structural steel erection.Ability to read fabrication and GA drawings.Knowledge of project planning and execution.Good leadership and team management skills.Strong communication and problem-solving abilities.Familiarity with MS Office, AutoCAD, and MS Project/Primavera is an advantage.QualificationB.E./B.Tech in Civil Engineering or Mechanical Engineering.

We are looking for a Design & Development Engineer to join our team in Padi. The ideal candidate will have a diploma and a passion for creating innovative designs. You will work full-time from the office and play a key role in product development and improvement.Key Responsibilities:- Product Design: Create and improve product designs based on project requirements, ensuring they are functional and meet quality standards.- Technical Documentation: Prepare detailed technical documents and reports that outline design specifications, processes, and methodologies for future reference.- Collaboration: Work closely with other engineers and team members to share ideas and solve design challenges effectively.- Prototyping: Develop prototypes to test and validate design concepts, ensuring they work as intended before moving into production.- Testing and Evaluation: Conduct testing on designs to ensure they meet performance and safety standards, making adjustments as needed.Required Skills and Expectations:The ideal candidate should have strong knowledge of design software and tools relevant to engineering. Good problem-solving skills, attention to detail, and the ability to work in a team are essential. A proactive attitude and willingness to learn new technologies and processes will be highly valued. Candidates must be able to communicate ideas clearly and effectively, both verbally and in writing. Experience in project handling and a systematic approach to work will be beneficial.

1.Implementation and follow up of system (IATF 16949:2016, & ISO14001:2015)2.Conducting Internal audit & NC Closure.3.Preparing PPAP (or) ISIR documents.4.Conducting Process & Product Audit as per plan5.Attending customer complaint and sorting out issues.6.Complaint sample analysis and 8D report preparation for customer complaint closure.7.Preparing monthly objective data and quality presentation.8.Monitoring of measuring instrument and calibration as per yearly plan.9.Carry out Supplier Evaluation Audit & supplier performance monitoring.

As a Supplier Quality Engineer, you will play a vital role in ensuring that the quality of materials and components from suppliers meets our company standards. You will collaborate with suppliers and internal teams to enhance processes and ensure high-quality products.Key Responsibilities:- Supplier Evaluation: Assess and select suppliers based on their quality performance, capabilities, and compliance with industry standards.- Quality Audits: Conduct regular audits at supplier locations to ensure adherence to quality standards and identify areas for improvement.- Quality Control Plans: Develop and implement quality control plans to ensure consistent quality of incoming materials.- Root Cause Analysis: Investigate quality issues that arise with supplier products and lead efforts to determine root causes and preventive measures.- Collaboration with Suppliers: Work closely with suppliers to provide quality feedback and guide them on improvement initiatives.- Documentation: Maintain accurate records of supplier quality performance, audit findings, and corrective actions taken.Required Skills and Expectations:Candidates should have a diploma in engineering or a related field, with 1-2 years of experience in quality engineering or supplier management. Strong analytical skills and attention to detail are essential for identifying issues and driving solutions. Effective communication skills are necessary for collaborating with suppliers and internal teams. A proactive approach to problem-solving and a commitment to maintaining high-quality standards will be critical in this role. Familiarity with quality tools and methodologies, such as Six Sigma or ISO standards, is a plus. This position is office-based in Ambattur Industrial Estate and is open to male candidates only.

Cost estimation and budgeting:Procurement and Tendering:Contract Administration:Cost Control and Value Engineering:Financial Reporting and Forecasting:Risk Management:Quality and Compliance Assurance:Client and Stakeholder Management:Documentation and Record Keeping:

Roles & Responsibilities:Perform incoming, in-process, and final quality inspections of products/components.Monitor production processes to ensure compliance with quality standards.Conduct visual, dimensional, and functional inspections using measuring instruments.Handle customer complaints and internal non-conformance issues.Prepare quality reports, inspection records, and documentation.Analyze defects, root causes, and implement corrective/preventive actions (CAPA).Ensure compliance with ISO standards, customer requirements, and company quality policies.Coordinate with production, design, and supplier teams for quality improvements.Perform calibration coordination for measuring instruments.Support audits (internal, external, and customer audits).Use tools such as 7 QC tools, Kaizen, 5 Why, Fishbone Analysis, etc.Monitor rejection, rework, and process deviation trends.Train operators and inspectors on quality procedures and standards.Ensure safety and housekeeping standards are followed.

A Mechanical Design Engineer develops mechanical systems, products, and components by creating 3D models and 2D drawings using CAD software (SolidWorks, AutoCAD, Creo). They take concepts from initial design through prototyping, testing, and final production, ensuring functionality, safety, manufacturability, and compliance with industry standards.

Greeting From Vishakan Placement Service Hiring Diploma Mechanical Candidate For Quality engineer (Online inspection-Line inspection) (Dy.Technician) Position in our leading Automotive Industry Tiruvallur Industry:Automotive Industry,Sheet Metal, Machining and Manufacturing Industry- Automobile component manufacture Role : (Quality Engineer) Qualification: Diploma/B.E-B.Tech Mechanical/Automobile Experience : Quality Online Inspection (1-3 Yrs) Skills: Strong knowledge in Quality Online inspection knowledge, good attitude and behavior, willing to work rotational shift Fixed Salary: Quality Online Inspection-15000 - 20000 CTC+ESI+PF BenefitsShift Timing : 06.00 am to 2.30 pm - 1st shift02.00pm to 09.50 pm - 2nd shift09.50pm to 06.00am - 3rd shift09.00 am to 05.30 pm - General shiftSunday Week OffTransport Facilities:Thiruvallur Railway Station-pickupThiruninravur Railway station-pickupNo of openings: 50+ Interview Schedule : Monday - Saturday / 10 AM- 12 PM & 2 PM-4 PM Interview Timing Interview Process: Direct Walkin Interview- HR Round - Technical Round - MD Round Immediate Joiner Must Work Location : Tiruvallur PapparapakkamCandidate Preferred Location: Thandalam,mannur village , Manavalanagar tiruvallur,Thiruvallur,Thirumazhisai,Poonamallee,Veppampattu,Thiruniravur , sevvapettai.Interested Candidate For Job Please kindly call immediately HR Pradeep -Vishakan Placement Service

As a CNC Operator, you will be responsible for operating and overseeing CNC machinery to create precision parts and products. This is a full-time position based in Tiruvallur.Key Responsibilities:- Set Up CNC Machines: Prepare machines for production by installing and aligning tools, fixtures, and workpieces according to specifications.- Read Technical Drawings: Examine blueprints and technical drawings to understand project specifications and ensure accurate production.- Monitor Machine Operations: Keep an eye on the performance of CNC machines during operation, making adjustments as needed to maintain quality.- Conduct Quality Checks: Use measuring tools to inspect finished products and ensure they meet required specifications and tolerances.- Maintain Equipment: Regularly clean and perform basic maintenance on machines to ensure they operate efficiently and safely.- Collaborate with Team: Communicate effectively with team members and supervisors to report issues, suggest improvements, and stay informed on project updates.Required Skills and Expectations:- A diploma in mechanical engineering or a related field is required, providing foundational knowledge for the role.- Familiarity with CNC machinery and tools is essential. Prior experience is a plus but not mandatory, as training will be provided.- Good attention to detail and precision to produce high-quality parts is crucial.- Basic problem-solving skills to troubleshoot minor machine issues are important.- Ability to work effectively in a team environment and communicate clearly with colleagues. Candidates should be eager to learn and adapt in a fast-paced manufacturing setting.

As a Tool Maker, you will be responsible for creating, repairing, and maintaining precision tools and molds used in the manufacturing process. Your work will ensure the smooth operation of production machinery and contribute to high-quality output.Key Responsibilities:- Tool Fabrication: You will design and build tools according to specifications, ensuring they meet the required standards for quality and precision.- Tools Maintenance: Regularly inspect and maintain tools to ensure they are in optimal working condition. This includes sharpening and repairing worn or damaged tools.- Blueprint Interpretation: Read and understand technical drawings and schematics to accurately create tools and molds that meet specific production needs.- Machinery Operation: Operate various machines such as lathes, milling machines, and grinding machines. Familiarity with these machines is essential for effective tool making.- Quality Control: Conduct tests to check the functionality and quality of produced tools, making necessary adjustments to meet quality standards.Required Skills and Expectations:- A Diploma in Mechanical Engineering or a related field is essential for this role.- You should have 2 to 8 years of relevant work experience in tool making.- Strong attention to detail and precision is crucial for producing high-quality tools.- Good problem-solving skills are necessary for identifying and fixing issues with tools or equipment.- Basic computer skills, particularly in design software, are advantageous for tool design tasks. We expect you to be a team player with effective communication skills and a strong work ethic. Your ability to work efficiently in a fast-paced environment is also important.

QMS Engineer Your keen eye to Detail Keeps Us Set for AuditsJob Description:Responsibilities:System Maintenance: Create and keep up the Standard Operating Procedures (SOPs), Work Instructions, and Quality Manuals that are part of the Quality Management System documentation.Audit Leadership: Serve as the main point of contact for external registrar audits (ISO/IATF) and lead and organize internal quality audits.Defect Analysis & CAPA: Use techniques such as 8D, 5-Whys, or Fishbone diagrams to look into the underlying causes of both internal and external non-conformities.Risk management: Conduct FMEA (Failure Mode and Effects Analysis) meetings to proactively find possible moulding process failure areas and put mitigation plans in place.Process Capability: To guarantee process stability, track and report on Key Performance Indicators (KPIs) such scrap rates, OEE, and CPK/PPK levels.Supplier Quality: Verify that incoming material quality satisfies production requirements by auditing raw material and masterbatch suppliers.Control the Engineering Change Note (ECN) procedure to make sure that any alterations to molds or procedures are recorded and verified without sacrificing quality.Training: Inform the QC and production teams on the value of data integrity, documentation procedures, and QMS standards.Experience: 3 to 5 yrsEducation: Diploma/BE in MechIf Interested Please do Send your CV along with you Informations as below to Mail infohrmaria04@gmail.comFull Name: Contact Number: Email Address: Current Location: Position Applied For: Qualification: Year of Passout: Candidate Category: Fresher / ExperiencedWillingness to Relocate: Yes / NoTotal Years of Experience: (If applicable) Current/Last Drawn Salary (Monthly/Annual): Notice Period:Warm regards,HR- Maria88708 33430

PED Engineer Cycle Time & Process ImprovementJob DescriptionExperience: 2 to 4 yrsSalary: Based on Company NormsEducation: Diploma/BE in MechLocation: In And Around ChennaiYour Duties:Process Design & Optimization: To guarantee a reliable and repeatable manufacturing window, establish and record scientific molding procedures.Mould Trial Leadership: Oversee To through T-Final trials for new molds; evaluate trial results to suggest process or tool changes.Design for Manufacturing: To avoid manufacturing problems, examine product designs and offer technical input on wall thickness, draft angles, and gate placements.Cycle Time Reduction: To cut cycle times by seconds without sacrificing part quality, perform time-motion studies and examine machine kinematics.Mould Flow Analysis: Make sure the mold design is ideal before steel is cut by using simulation software to forecast filling patterns, weld lines, and any air traps.Process validation: Create and carry out processes for installation, operation, and performance qualification, particularly for automotive or medical items.Candidate Application:Full Name: Contact Number: Email Address: Current Location: Position Applied For: Qualification: Year of Passout: Candidate Category: Fresher / ExperiencedWillingness to Relocate: Yes / NoTotal Years of Experience: (If applicable) Current/Last Drawn Salary (Monthly/Annual): Notice Period:We invite you to apply and explore this exciting opportunity!Warm Regards,HR - Mariaeight 8 seven 0 eight 3 three 4 three 0infohrmaria04@gmail.com

Build Smart Designs with Us Civil MEPS EngineerJob DescriptionExperience: 3 to 7 yrsSalary: Based on Previous ExperienceEducation: Diploma/BE in CIVIL EngineerDuties:Site Development: Develop comprehensive plans for paving, storm-water management, soil erosion control, and site grading.Utility Infrastructure: Create plans for subterranean utilities such as drainage systems, sanitary sewers, and water distribution.Clash Detection: To find and fix clashes between MEP building services and civil utilities, use Navisworks or comparable BIM software.Multidisciplinary Coordination: To guarantee that site-to-building transitions are precisely coordinated, collaborate with mechanical, electrical, and plumbing experts.Regulatory Approval: Verify that all designs adhere to ADA requirements, municipal rules, and environmental regulations.Permitting: Help prepare paperwork for utility provider approvals and municipal permits.BIM Coordination: Attend BIM coordination meetings to update models in response to project modifications.Site Visits: Make sporadic site visits to confirm current circumstances and make sure construction is in line with the design purpose.Ready to take the leapHR - Maria88708 33430infohrmaria04@gmail.com

1.PLC servicing and control circuit trouble shooting.2.DC and AC drive trouble shooting.3.Measuring and monitoring equipment's handling and troubleshooting.4.Machine wiring 5.DG and compressor maintenance.6.All type of hydraulic and pneumatic valves troubleshooting and servicing.7.Pcb boards and microchip controller servicing 8.Maintaining Engineering related ISO documents and well experience in preventive maintenance scheduling and execution.

We are looking for a PEB Engineer to join our team in Chennai. The ideal candidate will have a diploma and 1 to 5 years of relevant experience in Pre-Engineered Buildings (PEB). The position is full-time and requires the candidate to work from the office.Key Responsibilities:- Designing PEB Solutions: Create and develop efficient pre-engineered building designs based on project specifications and client needs. This involves using software tools and technical knowledge to optimize structures.- Project Coordination: Work closely with project managers and teams to ensure that all aspects of the design are correctly integrated and delivered on time. Communication is key to aligning goals and expectations.- Site Inspection: Conduct regular site visits to oversee construction progress and ensure that the implementation aligns with the designs. This helps identify any issues early in the process.- Quality Assurance: Ensure that all materials and methods used meet the industry standards and project requirements. This includes diligent checks of construction practices and final outputs.- Technical Support: Provide technical guidance and support to team members and contractors throughout the project lifecycle, assisting with problem-solving as needed.Skills and Expectations:The candidate should have strong analytical and problem-solving skills to effectively tackle engineering challenges. Proficiency in structural design software and a good understanding of relevant building codes is essential. Strong communication skills are necessary for collaboration with different teams. A proactive mindset, attention to detail, and the ability to work both independently and as part of a team will be important for success in this role.

Greeting From Vishakan Placement ServiceHiring ITI - Diploma mechanical For Quality Engineer (Dy.Technician) /Quality Online Inspection (Dy.Technician)(Fresher & Experience) Position in our leading Automotive Industry Ambattur.Industry:Automotive Industry,Sheet Metal, Machining and Manufacturing Industry- Automobile component manufactureRole : Quality line inspector Quality Online Inspection(Dy.Technician)Qualification: ITI/Diploma/B.E-B.Tech Mechanical/AutomobileFresher candidate & Experience: Quality Online Inspection (2-4 Yrs)Skills: Strong knowledge in Quality Online inspection knowledge, good attitude and behavior, willing to work rotational shift.Fixed Salary: 18k Inhand (Fresher Candidate)/Quality Online Inspection-20 K-30 K CTC+ESI+PF Benefits (Experience)Shift Timing : 08.30 am-5pm (2hrs O.T)- General shift Sunday Week OffNo of openings: 50Interview Schedule : Monday - Saturday / 10 AM- 12 PM & 2 PM-4 PM Interview TimingInterview Process: Direct Walkin Interview- HR Round - Technical Round - MD Round Immediate Joiner MustWork Location : Ambattur Chennai Employment ServicesCandidate Preferred Location: Avadi, Pattabiram, Puzhal, Redhills,Thirumullaivoyal,Interested Candidate For Job Please kindly call immediately

Greeting From Vishakan Placement Service Hiring ITI- Diploma mechanical candidate For Quality Engineer & Quality Online Inspection (Dy.Technician) Position in our leading Automotive Industry Tiruvallur Industry:Automotive Industry,Sheet Metal, Machining and Manufacturing Industry- Automobile component manufacture Role : Quality Online Inspection(Dy.Technician) Qualification: ITI/Diploma/B.E-B.Tech Mechanical/AutomobileExperience : Quality Online Inspection (2-4 Yrs) Skills: Strong knowledge in Quality Online inspection knowledge, good attitude and behavior, willing to work rotational shift Fixed Salary: 15K-18k Inhand -Fresher #Quality Online Inspection-20 K-30 K CTC+ESI+PF Benefits(Experience)Shift Timing : 06.00 am to 2.30 pm - 1st shift02.00pm to 09.50 pm - 2nd shift 09.50pm to 06.00am - 3rd shift 09.00 am to 05.30 pm & General shift Sunday Week OffTransport Facilities: Thiruvallur Railway StationThiruninravur Railway stationNo of openings: 50+Interview Schedule : Monday - Saturday / 10 AM- 12 PM & 2 PM-4 PM Interview Timing Interview Process: Direct Walkin Interview- HR Round - Technical Round - MD Round Immediate Joiner Must Work Location : Tiruvallur Candidate Preferred Location: Thiruvallur,Thirumazhisai,Poonamallee,Veppampattu,Thiruniravur, Sriperumbudur, thirumudivakkam,nemili,manavalanagar.Interested Candidate For Job Please kindly call immediately HR Pradeep -Vishakan Placement Service

We are looking for an Assembly Operator to join our team in Padi, Chennai. The ideal candidate should have between 1 to 7 years of experience and hold a diploma/ ITI or B.E in a relevant field.As an Assembly Operator, you will be responsible for assembling parts and components to create finished products according to specifications. You will read and interpret production drawings, instruction manuals, and quality standards to ensure accuracy in your work.Key responsibilities include:- Assembly of Components: You will use various tools and equipment to assemble products, ensuring each part fits correctly and meets our quality standards.- Quality Control: You will inspect assembled products for defects, and ensure they meet the required specifications, making adjustments as necessary.- Maintenance of Work Area: Keeping your work area clean and organized is essential to maintaining safety and efficiency, so you will be responsible for cleaning your workspace regularly.- Collaboration: Working as part of a team, you will communicate effectively with colleagues and supervisors to ensure production goals are met on time.Required skills include strong attention to detail and manual dexterity. Competence with hand tools and machinery is essential. You should be able to follow instructions carefully, work under pressure, and communicate effectively within a team. A commitment to quality and safety in the workplace is crucial for success in this role.

DescriptionWe are looking Roustabout & full crew for offshore jack up rig (No neededoffshore jack up rig experience CYBER)*POST- Roustabout -On Going vacancy for freshers candidates (Freshers Can also apply)*Only shortlisted candidates will get the call or mail from us.*SALARY PER MONTH IN:- 1200 to 1500 $ USDOffshore Documents REQ: BOSIET,HUET & H2S (Offshore Course Certificate)Education Documents REQ:10th,12th & Degree Certificate.Identity Documents REQ:Passport.