Systems Engineer Graduate Jobs in Pune

WE'RE HIRING Rotating Equipment Engineer - O&M Water TreatmentLocation: Gujarat, IndiaJob Type: Full-time, PermanentWe are looking for an experienced Rotating Equipment Engineer to lead the operation, maintenance, reliability and troubleshooting of rotating equipment across our water treatment and industrial/hazardous wastewater treatment plants.ROLES & RESPONSIBILITIESLead operation, maintenance, reliability and troubleshooting of rotating equipment in water and wastewater treatment plantsManage centrifugal, dosing/metering, positive displacement, sludge/screw and submersible pumps, blowers, compressors, mixers, agitators, aerators and centrifugesSupport clarifiers, DAF/CAF units, filter press and sludge dewatering equipment, RO high-pressure pumps, UF/MBR feed and backwash pumps, ozone and air systems, and cooling water pumpsPlan and execute preventive and predictive maintenance: vibration analysis, thermography, oil analysis, alignment and balancingTroubleshoot cavitation, seal and bearing failures, vibration, misalignment, overheating, corrosion, erosion and abnormal noisePerform root cause analysis (RCA) and propose corrective and preventive actions (CAPA) to improve reliability and reduce downtimeCoordinate repairs, overhauls, shutdowns and contractor/vendor activities; manage critical spares and inventoryWork with process and operations teams so equipment performance supports treatment efficiency and discharge complianceSupport motors, VFDs, couplings, gearboxes, mechanical seals and associated piping and valves with electrical and instrument teamsEvaluate and recommend equipment replacements, upgrades and modifications, including pump curve and performance assessmentSupport commissioning and startup, including mechanical completion checks, alignment and run testsPrepare and maintain equipment datasheets, maintenance plans, SOPs, equipment history records, CMMS data and technical reportsEnsure compliance with EHS, Permit-to-Work (PTW), lockout/tagout, confined space and chemical handling requirementsParticipate in risk assessments (RA), MSJSA reviews, MOC reviews, government inspections and customer auditsRecommend improvements to equipment reliability, energy efficiency and maintenance costQUALIFICATIONS & EXPERIENCEDiploma or Bachelor's degree in Mechanical Engineering or a related disciplineMinimum 5 years of experience in rotating equipment maintenance and reliability in water treatment, wastewater treatment or process industry plantsHands-on experience with pumps, blowers, compressors, mixers and sludge handling equipment, including mechanical seals and bearingsExperience in condition monitoring such as vibration analysis and alignment is preferredAble to read and interpret P&IDs, mechanical drawings, pump curves and equipment datasheetsFamiliar with CMMS and maintenance planning systemsStrong troubleshooting skills and ability to work independently under abnormal plant conditionsFamiliar with PTW, RA, MOC and relevant safety and environmental regulationsGood communication skills with operations, maintenance and management teamsStrong sense of responsibility and willingness to work on-site, including shifts and emergency call-outs when requiredHOW TO APPLYSend your CV to: planofabhosur@gmail.comPlease share this post with anyone who may be interested!

Industrial Robotics EngineerExperience: 8-11 YearsLocation: PuneWe are hiring an Industrial Robotics Engineer to design, program, integrate, and optimize robotic systems and motion-control solutions for industrial automation applications.Key ResponsibilitiesDesign and implement industrial robotic systems and automation solutions.Develop robot programs, motion-control logic, and control sequences.Integrate robots with PLCs, sensors, servo drives, and other automation equipment.Perform robot commissioning, troubleshooting, and performance optimization.Support robotic cell integration and production-line automation.Collaborate with mechanical, electrical, and controls engineering teams.Ensure safety standards, system reliability, and project delivery timelines.Relevant SkillsIndustrial Robotics, Robot Programming, Motion Control, PLC, Servo Drives, Robot Integration, Industrial Automation, ABB Robots, FANUC, KUKA, Siemens PLC, Robot Simulation, Safety Systems, Commissioning, Troubleshooting

Key Responsibilities & SkillsMinimum 2-3 years of experience in Salesforce Administration and L2 Application/System Support.Hands-on experience with Salesforce (SFDC) is mandatory.Strong understanding of Salesforce data models, with hands-on experience in Reports and Dashboards for data analysis.Ability to understand and analyze business logic and requirements.Experience managing Salesforce users, data, profiles, permissions, and security.Strong troubleshooting and problem-solving skills, especially in L2 support environments.Ability to analyze and resolve complex application issues quickly with strong attention to detail.Hands-on experience with Data Loader and other Salesforce data management tools.Good verbal and written communication skills.Anaplan exposure is a plus / good to have.

# Hiring: Field Engineer / Desktop Support EngineerCompany: Swaroop IT SolutionsLocation: Pune, MaharashtraJob Type: Full-time On-siteExperience: Fresher or up to 6 months### About the JobSwaroop IT Solutions is looking for a motivated and technically skilled Field Engineer / Desktop Support Engineer to join our team.This is a full-time field-based opportunity for candidates who have completed a Hardware & Networking course or have basic IT support knowledge.### Required Skills* Basic Computer / Laptop Hardware Knowledge* Desktop / Laptop Formatting and Windows Installation* Software Installation and Troubleshooting* Basic Networking Knowledge* LAN Cable Crimping and Network Troubleshooting* Printer Installation and Basic Troubleshooting* Basic Router / Switch Knowledge* CCTV / DVR Basic Knowledge is an added advantage### Job Responsibilities* Visit customer offices / sites for IT support.* Handle computer, laptop, printer and networking-related issues.* Perform hardware and software troubleshooting.* Provide on-site technical support to customers.* Travel to customer locations as required.### Salary & Benefits* Salary: 9,000 per month* Travelling Allowance: Separate, as per company policy* Opportunity to learn and grow in the IT support field.### Who Can Apply?* Freshers with Hardware & Networking knowledge* Candidates with up to 6 months of relevant experience* Candidates willing to work in the field* Candidates with good communication and troubleshooting skillsInterested candidates can share their resume. Contact: 9021864013Company: Swaroop IT Solutions

We are seeking an experienced and technically strong ELV / Security Systems Engineer with 35 years of hands-on experience in CCTV, Access Control, PA Systems, and LAN Networking. The role involves system design support, site execution, commissioning, troubleshooting, and coordination with clients and project teams.________________________________________Key Responsibilities Design, install, configure, test, and commission CCTV systems (IP/Analog cameras, NVR/DVR, VMS, storage, and monitoring). Handle Door Access Control Systems including biometric, card, face recognition devices, controllers, locks, and integrations. Design and execute PA Systems including amplifiers, speakers, microphones, zoning, and cabling. Plan and implement LAN Networking: structured cabling, switches, routers, patch panels, racks, and basic network configuration. Perform system integration, fault diagnosis, and advanced troubleshooting. Read, understand, and prepare drawings, layouts, BOQs, and wiring diagrams. Coordinate with clients, consultants, and internal teams to ensure timely project delivery. Supervise technicians and ensure work quality and safety compliance at sites. Conduct system testing, user training, and final handover documentation. Provide technical support and maintenance support when required.________________________________________Technical Skills & Requirements 35 years of field and project experience in ELV / Security systems. Strong knowledge of IP networking, TCP/IP, VLAN basics, and system integration. Experience with commissioning tools, testing equipment, and troubleshooting methods. Hands-on experience with leading brands such as Hikvision, Dahua, CP Plus, ESSL, Matrix, Bosch, or similar. Knowledge of electrical standards, earthing, and safety practices.________________________________________Qualifications Diploma / BE / BTech in Electronics, Electrical, IT, Networking, or related field. Relevant certifications in CCTV, Networking, or Security Systems will be an added advantage.________________________________________Soft Skills Good communication and documentation skills. Leadership and team-handling capability. Willingness to travel to project sites. Strong problem-solving and customer-oriented attitude.________________________________________Compensation & Benefits Annual salary: 3.6 L 6.0 L (based on experience and skills). Performance-based incentives as per company policy. Career growth opportunities on advanced security and networking projects

Key Responsibilities:1. Provide technical support: Assist users with troubleshooting and resolving hardware and software issues on their systems.2. Install and configure systems: Set up new computer systems, including operating systems, software, and hardware components.3. Monitor system performance: Keep an eye on system performance metrics and proactively address any issues to ensure smooth operation.4. Maintain system security: Implement security protocols, perform regular system updates, and conduct system audits to protect against cyber threats.5. Collaborate with IT team: Work closely with IT team members to coordinate system upgrades, implementations, and maintenance activities.Required Skills and Expectations:- Proficiency in troubleshooting hardware and software issues to provide timely technical support.- Knowledge of system installation and configuration processes to set up new systems efficiently.- Familiarity with monitoring tools and techniques to track system performance and identify areas for improvement.- Understanding of cybersecurity principles and best practices to maintain system security.- Strong communication skills to effectively collaborate with team members and provide support to end-users.

Job post summaryDate posted: 14 November 2025Pay: From 40,000.00 per monthJob Description:Golden Relief Resources Global Ltd is a Dubai based MNC having its presence in Central Africa, Gulf Areas and in India. In India it is known as Golden Relief Resources India Pvt Ltd and has presence at Delhi, Pune and Visakhapatnam.We are into Construction, Equipment Leasing, Trading and Supplies, Procuring to Military & Humanitarian Forces. For more details visit our website www.grrgl.com for more details. We have notable expertise in Construction. Adhering to our firms corporate culture is focused on client service, technical excellence and professional integrity.We are searching for a reliable Estimation Engineer MEP to join our capable team of professionals. The estimation engineer will be tasked with analyzing requirements, tendered documents, existing budgets and submission of tenders. To be successful as an Estimation Engineer you should have a methodical approach and superb interpersonal skills. Outstanding estimators are not only great at analyzing costs, but they also know how to read people and tailor their negotiation strategies to ensure the best possible outcome.Location : Pune (WFO)Responsibilities:Review MEP design plans, specifications, and technical documents to comprehend project requirements and scope.Identify and quantify materials, equipment, labor, and other resources needed for MEP installations. Preparation of BOQ accordingly.Utilize industry knowledge and databases to determine current market prices for MEP materials, equipment, and services.Calculate precise cost estimates for MEP systems, considering all expenses, including direct and indirect costs.Prepare comprehensive cost estimates, clearly delineating cost breakdowns for materials, labor, equipment, and contingencies.Maintain meticulous records of cost data, vendor quotes, and reference materials.Collaborate closely with MEP engineers, project managers, and clients to ensure alignment between cost estimates and project plans.Provide valuable insights on cost-related aspects during project meetings and discussions.Participate in value engineering initiatives to identify cost-effective alternatives and innovative solutions while maintaining MEP system performance.Assist in creating tender documents, including thorough cost estimates and MEP-related bid proposals.Analyze bid submissions and contribute insights on competitiveness and alignment with project requirements.Stay updated on MEP technologies, industry trends, and market conditions that might impact cost estimation accuracy.Contribute to the continuous enhancement of estimation processes and tools.Evaluate potential risks linked to MEP installations that could affect project costs, and offer recommendations for risk mitigation.Knowledge, Skills and Abilities Required:BE/BTech in Electrical preferred or Mechanical. Diplomas will not be considered.Experienced in between 3 to 7 years in same field or mostly from construction backgroundExperience in estimation of projects in India or OverseasExcellent Communication skill. Proficient in EnglishCandidate must know Tendering Process, Quantity Take Off, cost estimation, Rate Analysis, Electric Load Calculations, etcThis job consists of 60% electrical tasks, 40% Plumbing tasks & 10% Mechanical tasks.Thanks & RegardsJyoti Sarodehr2@grrgl.com/9637185563 ( Kindly whts up your resume or mail on the given mail ID)Job Types: Full-time, PermanentBenefits:Health insurancePaid sick timeProvident Fund

Design and Development: Design and develop electric vehicle systems, including power train components, battery management systems, and motor control systems.- Simulation and Analysis: Use simulation tools like MATLAB, Simulink, and ANSYS to analyze and optimize EV systems.- Testing and Validation: Test and validate EV systems to ensure compliance with industry standards and regulations.- Collaboration: Work with cross-functional teams to integrate electronic systems into vehicles.Requirements:- Education: Bachelor's or Master's degree in Electrical, Electronics, or Automotive Engineering.- Experience: 2 to 5 years of experience in automotive electronics or a related field.- Skills:- Programming: Proficiency in programming languages like C, C++, and MATLAB.- Simulation Tools: Experience with simulation tools like MATLAB, Simulink, ANSYS, and SolidWorks.- Embedded Systems: Knowledge of embedded systems, microcontrollers, and automotive communication protocols.- Analytical Skills: Strong analytical and problem-solving skills.Preferred Skills:- Knowledge of EV Technology: Familiarity with electric vehicle technology, including battery management systems, motor control, and charging infrastructure.- Experience with Automotive Industry Standards: Knowledge of industry standards like ISO 26262 and Automotive SPICE.- Experience with Agile Development Methodologies: Familiarity with agile development methodologies and version control systems like Git.Contact- Mr. D. M. Patil

SV Group (Supreme Fire System)Job Title: Fire Site EngineerReports to: Site Supervisor Location: [Wakad]Job Summary:We are seeking an experienced and skilled Fire Site Engineer to join our team. The successful candidate will be responsible for ensuring that all fire safety systems and equipment are installed, tested, and maintained in accordance with relevant codes, standards, and regulations. This includes designing, installing, and commissioning fire safety systems, as well as conducting regular inspections and tests to ensure that they are functioning properly.Key Responsibilities:1. Installation:- Install fire safety systems, including fire alarm systems, sprinkler systems, and fire suppression systems- Ensure that all systems are installed in accordance with relevant codes, standards, and regulations2. Testing and Commissioning:- Conduct regular tests and inspections to ensure that fire safety systems are functioning properly- Commission new systems and ensure that they are functioning as intended3. Maintenance and Repair:- Perform routine maintenance and repairs on fire safety systems and equipment- Ensure that all systems and equipment are in good working condition and meet relevant codes and standards4. Inspections and Audits:- Conduct regular inspections and audits to ensure that fire safety systems and equipment are compliant with relevant codes, standards, and regulations- Identify and report any deficiencies or issues to management5. Code Compliance:- Ensure that all fire safety systems and equipment are designed, installed, and maintained in accordance with relevant codes, standards, and regulations- Stay up-to-date with changes to codes, standards, and regulations and implement any necessary changes6. Communication and Collaboration:- Communicate with internal stakeholders, including project managers, site managers, and other engineers- Collaborate with other departments to ensure that fire safety systems and equipment are integrated with other systems and equipmentRequirements:1. Education:- Bachelor's degree in Fire Protection Engineering, Mechanical Engineering, or a related field2. Experience:1-6 years of experience in fire protection engineering, preferably in the construction industry3. Skills:- Strong knowledge of fire safety systems and equipment, including fire alarm systems, sprinkler systems, and fire suppression systems- Excellent communication and problem-solving skills- Ability to work independently and as part of a teamWhat We Offer:1. Competitive Salary:Petrol allowance, depending on experienceIf you are a skilled and experienced fire protection engineer with a passion for ensuring the safety of people and property, we encourage you to apply for this exciting opportunity.

We have vacant of 2 Quality Assurance Quality Control Engineer Jobs in Sanaswadi, Pune, Experience Required : 2 Years Educational Qualification : B.E Skill Quality Assurance, Quality Control, Product Quality, Quality Check, Quality Analysis, QA-quality Assurance, Quality Assurance Systems, Quality Orientation, Quality Procedures etc.

Identification of potential new customers.Development of existing customers.Presenting, promoting and selling of products according to company standards and policiesOffering product in line with applicationCustomer counseling concerning best choices.Analysis of competition in the designated area.Preparation and verification of quotations both technically and commercially.Preparation of customer dossier.Proposal of active measures to increase salesEnsures the realization of monthly, quarterly and annual sales planNegotiation & contract finalization with client.Familiarity with PLCs, SCADA, HMI, VFD, Sensors, Vision system Products and Servo motors & drives Control panel familiarity added advantage.Enhancing relations with Clients, consultants & vendors.Maintain sales database & Offer follow-upsTarget achievement

Hands-on experience in installation, programming, and commissioning of robots. Good technical knowledge Sales, Marketing Business Development / Developing New clients. Enquiry generation and offer / quotation submission. Negotiation contract finalization with client. Customer & Requirement Analysis: Analyses and interpret customer inquiries to define project requirements. Assess project feasibility and lead detailed requirement discussions with customers. Project Planning & Execution: Oversee the development and timely execution of robotic automation projects. Define project timelines, deliverables, and resource allocation to ensure smooth execution. Coordinate with cross-functional teams, including engineering, procurement, and operations, to achieve project objectives. Stakeholder & Supplier Coordination: Liaise with customers, suppliers, and internal teams to ensure timely material procurement and supply chain efficiency. Facilitate communication between technical teams and clients to manage expectations and project progress.

You will work as part of a Team and Individually with Little Supervision. Understand Client Requirements and how they translate in Application Features. Collaborate with a Team of PLC Professionals to set Specifications for new Applications. Write high quality Source Code to program complete applications within Deadlines. Perform Unit and Integration Testing before Launch. Conduct Functional and Non-functional Testing. Troubleshoot and Debug Applications. Evaluate Existing Applications to Reprogram, Update and add new features. Develop Technical Documents and Handbooks to accurately represent Application Design and Code. Proven experience as Application Developer. Experience in Designing and Building Applications. In-depth knowledge of PLC and HMI Programming with diverse Development Tools. Excellent understanding of Software Design and Programming Principles. A team player with excellent Communication Skills. Eager to Travel all over India for the Development / Installation / Service Support.

We are looking for 2 Design Engineer Posts in Talwade, Pune, with deep knowledge in - SolidWorks (mandatory) - AutoCAD - SPM design in automation - Pneumatic systems - Motor gearbox - Rotary and linear index table selection - Manufacturing knowledge in automation - Responsibilities: - Design and development - Documentation - Team handling - Industrial safety, Mechanical Design, AutoCAD 2D, Solidworks and Required Educational Qualification is : B.Tech, M.Tech, Diplomate of National Board

Desktop Administration, Hardware Troubleshooting, Network Printer Installation, Remote Support, Desktop Support, System Administration, CCNA, Active Directory, MCSA, Configuring DHCP, Technical Support, ITIL, Service Desk, Software Services, Video Conferencing

BUILTONINDIA is hiring for the role of PMC Engineer!About Us:BUILTONINDIA specializes in engineering consultancy for construction, infrastructure, and industrial sectors.Expert team of engineers, architects, and consultants delivering high-quality project management services.Focus on efficiency, compliance, and innovation in every project.Role Overview:Looking for a PMC Engineer with expertise in luxury retail fit-outs, MEP coordination, and project execution.Responsible for overseeing high-end retail and jewellery store projects.Ensure high-quality standards and collaborate with stakeholders for seamless execution.Key Responsibilities:Project Oversight: Lead and manage MEP installations, interior fit-outs, and ensure project completion within defined timelines and budgets.Stakeholder Coordination: Work with clients, developers, and contractors to align design, procurement, and execution.Quality & Compliance: Ensure all HVAC, electrical, plumbing, and fire safety systems meet industry and regulatory standards.Risk & Budget Management: Identify potential project risks, ensure cost control, and monitor vendor compliance.Reporting & Documentation: Maintain BOQs, as-built drawings, warranties, and certifications for project closeout.Handover & Snag Resolution: Conduct final inspections, create defect lists/snags, and ensure all corrections are completed before handover.Requirements:Strong experience in MEP systems, project execution, and contractor/vendor management.Proficiency in AutoCAD, BOQ preparation, and project reporting.Ability to handle multiple stakeholders and contractors.Knowledge of safety, quality control, and compliance standards.Benefits:Work with prestigious luxury retail brands.Lead high-end fit-out & MEP projects.Collaborative, growth-oriented work environment.Other Details:Location: PAN IndiaEmployment Type: Full-TimeEducation: BE Civil / Electrical / Mechanical (Preferred)Experience: 4-6 year

Service Engineer - Automation Industrial AutomationExperience: 6-9 YearsLocation: PuneHiring Company: Talent Zone ConsultantBrief JD:We are hiring a Service Engineer - Automation with strong experience in industrial automation equipment and control systems. The role involves installation, commissioning, troubleshooting, preventive maintenance and providing technical support to customers at site.Key Responsibilities:Install, commission and service automation systems.Troubleshoot PLC, HMI, VFD, servo and control system issues.Conduct preventive and corrective maintenance.Provide onsite technical support and resolve customer issues.Coordinate with engineering and project teams.Prepare service reports and technical documentation.Travel to customer sites as required.Relevant Skillset:Industrial Automation, Service Engineering, PLC, HMI, VFD, Servo, SCADA, Sensors, Control Systems, Electrical Troubleshooting, Installation, Commissioning, Preventive Maintenance, Field Service, Customer Support

Application EngineerExperience: 10-12 YearsLocation: PuneHiring Company: Talent Zone ConsultantBrief JD:We are hiring a Senior Application Engineer with strong experience in industrial automation solutions. The role involves understanding customer requirements, developing technical solutions, product selection, application support, troubleshooting, and coordination with sales and engineering teams.Key Responsibilities:Understand customer applications and technical requirements.Develop suitable automation solutions and configurations.Provide pre-sales and post-sales technical support.Handle product selection, sizing and technical proposals.Support installation, commissioning and troubleshooting.Conduct product demonstrations and technical presentations.Coordinate with customers, sales and engineering teams.Relevant Skillset:Application Engineering, Industrial Automation, PLC, HMI, SCADA, VFD, Servo, Sensors, Motion Control, Control Systems, System Integration, Technical Support, Product Selection, Commissioning, Troubleshooting, Technical Proposal