Engineering Jobs

We are urgently hiring Aircraft Maintenance Junior Engineers to support aircraft inspection, maintenance, troubleshooting, servicing, and repair activities at airports and aviation maintenance facilities. The selected candidates will work under authorized engineers and maintenance supervisors to ensure aircraft are maintained in accordance with approved maintenance procedures, safety standards, and regulatory requirements.Key ResponsibilitiesPerform routine and scheduled aircraft maintenance activities.Assist in inspection, servicing, troubleshooting, and repair of aircraft systems and components.Conduct visual inspections and identify defects, damage, leaks, or abnormal conditions.Assist licensed/certifying engineers during maintenance and rectification work.Carry out maintenance tasks according to approved Aircraft Maintenance Manuals (AMM), technical documentation, and company procedures.Assist with removal, installation, testing, and replacement of aircraft components.Perform basic troubleshooting of mechanical, electrical, hydraulic, pneumatic, and avionics systems as applicable.Maintain accurate maintenance records, work cards, inspection reports, and technical documentation.Ensure proper use and control of tools, ground support equipment, and maintenance equipment.Follow aircraft maintenance safety procedures and airport safety regulations.Ensure FOD prevention and maintain a clean and safe working environment.Report aircraft defects, technical issues, and unsafe conditions to the appropriate supervisor.Assist with aircraft turnaround and line maintenance activities when required.Support aircraft servicing activities, including relevant ground maintenance tasks.Follow company quality, safety, security, and compliance procedures.Participate in shift-based, night, weekend, and holiday duties as required.Coordinate with maintenance engineers, supervisors, operations, and other airport teams.Maintain confidentiality and proper handling of aircraft technical information.For Junior EngineersAssist senior/authorized engineers in aircraft maintenance and inspection.Review technical manuals and maintenance instructions before performing assigned tasks.Support troubleshooting and fault isolation activities.Assist in technical documentation and maintenance record preparation.Monitor maintenance activities for compliance with approved procedures.Develop practical knowledge of aircraft systems, maintenance practices, and aviation regulations.For Aircraft Maintenance TechniciansPerform assigned mechanical/electrical maintenance tasks under appropriate supervision.Inspect aircraft structures, components, and systems for defects.Remove and install aircraft components as authorized.Use maintenance tools and test equipment correctly.Assist with servicing, repair, inspection, and functional testing.Maintain tools and equipment in serviceable condition.Follow maintenance instructions and safety procedures at all times.Required QualificationsJunior Engineer:Diploma / Bachelor's degree in Aircraft Maintenance Engineering, Aeronautical Engineering, Aerospace Engineering, Mechanical Engineering, Avionics, or a related field, depending on the employer's requirements.Relevant AME training/licensing or regulatory eligibility may be required for specific positions.Technician:ITI / Diploma / relevant technical qualification in Aircraft Maintenance, Aviation, Mechanical, Electrical, Electronics, or related discipline.Aircraft maintenance training or relevant aviation experience is an advantage.Preferred SkillsKnowledge of aircraft maintenance procedures and safety practices.Basic understanding of aircraft systems and components.Ability to read and understand technical manuals and maintenance documentation.Good troubleshooting and problem-solving skills.Strong attention to detail.Good mechanical/electrical aptitude.Ability to work effectively in a team.Good communication and reporting skills.Ability to work under time-sensitive airport operations.Willingness to work in shifts, including nights, weekends, and holidays.Strong commitment to aviation safety and quality standards.ExperienceFreshers: May be considered for trainee/junior positions subject to qualification and employer requirements.Experienced: Candidates with aircraft maintenance, MRO, airline, airport, line maintenance, or base maintenance experience may be preferred for experienced positions.Working ConditionsWork may be performed on aircraft stands, hangars, maintenance facilities, and airport operational areas.Candidates should be comfortable working outdoors and around aircraft and ground-support equipment.Shift duties may include early mornings, nights, weekends, and public holidays.The role may require standing, walking, climbing aircraft access equipment, and handling maintenance tools/equipment.Key CompetenciesTechnical Knowledge Aircraft Maintenance Troubleshooting Safety Awareness Quality Control Teamwork Attention to Detail Technical Documentation Problem Solving Time ManagementSalary & BenefitsSalary: As per company standards and candidate's qualification/experienceShift allowance may be applicable.Overtime and other benefits may be provided according to company policy.Training and career-development opportunities may be available.Statutory benefits may apply based on employer policy and applicable regulations.

* Provide on-site technical support for client hardware, software, POS systems, and networking issues.* Unbox, install, mount, configure, and set up POS machines and related equipment at customer locations.* Install and configure Windows OS and troubleshoot basic Windows/Linux operating system issues.* Install, configure, and troubleshoot printers, barcode scanners, receipt printers, cash drawers, and other POS peripherals.* Diagnose and resolve hardware, software, network, and connectivity issues.* Troubleshoot physical connectivity issues, faulty hardware components, and local power supply problems.* Perform basic network troubleshooting, including LAN, Wi-Fi, IP configuration, and connectivity issues.* Lay, crimp, terminate, and patch Ethernet/network cables as required.* Conduct testing after installation or repair to ensure all POS equipment and peripherals are working properly.* Respond to customer service requests and resolve technical issues promptly.* Coordinate with internal technical and support teams to resolve complex issues when required.

Reputed Engg co requires urgentlyQC / Inspection EngineerSalary Rs 20000 to 32000 pm all inclusive grossIndustry - Static process equipmentProducts/ equipment - Pressure Vessels, Reactors, Heat Exchangers, Columns, Tanks, etcLocation - AMBERNATH EAST (Anand Nagar MIDC)Weekly off - SundaysCompany - 35 year old, established engg co with modern plant.Clients include reputed cos from pharma, chemicals, agro-chemicals, cement, etc industries in India and abroad________________________________________________Qualified candidates with relevant experience can apply within 7 days with follwoing details..1. Resume2. Present/ last salary3. Willing to travel to Ambernath4. Earliest joining dateMail to rankandfile94@yahoo.co.in or whatsapp details to 9820824647_______________________________________________Call/ contact urgentlySHOBANARank & File consultants9820824647______________________________________________REQUIRED:Diploma/ Degree - Mech/ Production/ Fabrication (or) ITI - Mech DraughtsmanNDT/ ASNT Level II - RT / PT / UTMin. 3 experience in manufacturing of process equipment, pressure vessels, heat exchangers, similar equipment...Knowledge of engineering drawings, fabrication processes, and inspection methods.Familiarity with QA/QC documentation, inspection procedures, and relevant codes/standardsEmployee with shop floor knowledge will have an advantageMAIN RESPONSIBILITIES:Perform quality inspection of process equipment, pressure vessels, heat exchangers, etcConduct in-process and final inspections during fabrication and assembly.Review material test certificates (MTCs), inspection reports, and quality documentation.Coordinate with production, welding, and inspection teams to resolve quality issues.Ensure compliance with company quality procedures and safety requirements._______________________________________________

As a Quality Engineer, you will play a crucial role in ensuring the highest standards of quality across our products and processes. Your responsibilities will include:- Developing Quality Standards: Create and implement quality standards that align with industry regulations and company goals, ensuring product compliance and customer satisfaction.- Conducting Inspections: Perform regular inspections and tests on products to identify defects or areas for improvement, helping to maintain high-quality outputs.- Analyzing Data: Collect and analyze data from inspections and tests to determine trends, performance, and areas requiring adjustments, which will inform future quality initiatives.- Facilitating Training: Provide training to team members on quality control processes and standards, fostering a culture of quality across the organization.- Reporting Issues: Document quality-related issues and communicate findings to the management team, suggesting improvements or corrective actions when necessary.- Collaborating with Teams: Work closely with production, engineering, and supply chain teams to address quality issues and implement solutions that enhance overall product quality.Candidates for this position should possess strong analytical skills and be detail-oriented. You must have a diploma in a related field and 2 to 5 years of experience in quality assurance or engineering. A solid understanding of quality control processes and tools, excellent communication skills, and the ability to work independently are essential. As this role allows for remote work, self-motivation and time management skills are also important.

We are looking for a Biotechnology Engineer to join our team in Chennai. This is a full-time position suitable for fresh graduates or those with up to one year of experience. The ideal candidate will contribute to various biotechnology projects and support research and development activities.Key Responsibilities:- Research and Development: Engage in experiments to develop new biotech products and processes, collaborating with the team to innovate solutions.- Data Analysis: Analyze experimental data and results, ensuring accuracy and relevance, to help in making informed decisions about the project progress.- Lab Management: Maintain laboratory equipment and supplies, ensuring everything is in working order and properly stocked for ongoing experiments.- Documentation: Prepare detailed reports on research findings, including methods and outcomes, to comply with regulatory standards and assist in future projects.- Collaboration: Work closely with scientists and engineers in interdisciplinary teams, sharing insights and contributing to a positive working environment.Required Skills and Expectations:Candidates should hold a degree in fields such as BDS, B.Pharma, B.Sc, B.E, or BVSC. Strong analytical skills are essential for interpreting data and drawing meaningful conclusions. Candidates should be detail-oriented, organized, and able to work independently as well as part of a team. Good communication skills, both written and verbal, are necessary for effective collaboration and documentation. A basic understanding of biotechnology principles and laboratory practices will be beneficial.

Mandatory Requirements:- B. Tech. Degree from a reputed engineering college (VJTI, NITs, etc.).- Minimum 15 years of experience. - Full proficiency in Microsoft Excel, Staad Pro and AutoCAD.- Fluent in English. - Experience in industrial structures. - Excellent knowledge of structural analysis & design and IS design codes.- Must have led a team of at least 3 engineers and 2 drafters. Preferred Requirements:- M. Tech. Degree from a reputed engineering college (VJTI, NITs, etc.).- Should be at the top of his class in engineering college (B. Tech or M. Tech.) - Full proficiency in ETABS. - Joining time preferred within 30 days, should not exceed 60 days. - Candidate should be a Mumbai resident. Job Responsibilities:- Leading & guiding a team of 2-3 engineers and 2-3 drafters. - Performing structural analysis and design of a variety of structures. - Reviewing structural drawings. - Using AutoCAD to make changes to drawings if required. - Managing design schedule of projects. - Interaction with clients including F2F meetings.- Design coordination between various disciplines for turnkey projects. - Site Visits when required.

As a Mechanical Engineer, you will be involved in the design, analysis, and improvement of mechanical systems. You will work in a collaborative environment, contributing to various projects in Germany.Key Responsibilities:- Design Engineering: Create detailed designs for mechanical systems and components using CAD software. This includes developing specifications and ensuring designs meet project requirements.- Testing and Evaluation: Conduct testing on prototypes to assess their performance and efficiency. This involves analyzing results and making necessary adjustments to improve designs.- Project Collaboration: Work closely with cross-functional teams, including electrical engineers and product managers, to ensure seamless integration of all system components.- Problem Solving: Identify and troubleshoot issues in existing mechanical systems. Use analytical skills to develop effective solutions to enhance system performance.- Documentation: Maintain accurate documentation of design processes, changes, and test results. This ensures project transparency and compliance with industry standards.Required Skills and Expectations:You should have a Bachelors degree in Mechanical Engineering or a related field. Strong problem-solving abilities and analytical thinking are essential for this role. Proficiency in CAD software is important for design tasks. Good communication skills will help you collaborate effectively with team members. A foundational understanding of mechanical systems and a willingness to learn is expected. You should also be capable of working independently and managing your time efficiently to meet project deadlines.

As a Roustabout, you will play a crucial role in supporting various operations in the oil and gas industry. Your primary focus will be on assisting with the maintenance and cleaning of equipment, while working under the supervision of experienced team members.- Equipment Maintenance: Assist in the maintenance of machinery and tools, ensuring they are in good working condition for safe operations.- Cleaning Duties: Responsible for cleaning work areas and equipment, which helps keep the environment safe and organized.- Material Handling: Help in loading and unloading materials and equipment, ensuring everything is stored correctly and safely.- General Labor Tasks: Perform various manual labor tasks as needed, such as digging, lifting, and carrying, to support day-to-day operations.- Safety Compliance: Follow all safety protocols and procedures to maintain a safe working environment for yourself and others.To be successful in this role, you should possess the following skills and qualifications:- A minimum of a 12th-grade education is required. - Basic understanding of safety practices in a work environment.- Willingness to perform physical tasks and work outdoors in various conditions.- Ability to work effectively within a team and follow instructions.- Strong communication skills to interact with supervisors and colleagues.No prior experience is necessary, making this an excellent opportunity for individuals looking to start a career in the oil and gas industry.

An Aircraft Maintenance Engineer (AME) is responsible for inspecting, maintaining, repairing, troubleshooting, and certifying aircraft to ensure they are safe, airworthy, and compliant with aviation regulations. The role involves carrying out scheduled and unscheduled maintenance on aircraft systems, engines, avionics, electrical components, hydraulic systems, landing gear, and structural components while adhering to the standards established by aviation authorities.Key ResponsibilitiesAircraft Inspection & MaintenancePerform routine, preventive, scheduled, and unscheduled aircraft maintenance.Conduct daily, transit, weekly, A-check, B-check, C-check, and heavy maintenance inspections.Inspect aircraft structures, fuselage, wings, landing gear, flight controls, and engines.Diagnose and rectify aircraft defects using approved maintenance procedures.Replace, repair, and overhaul defective aircraft components.Ensure all maintenance tasks are completed according to the Aircraft Maintenance Manual (AMM).Troubleshooting & RepairsIdentify mechanical, hydraulic, electrical, pneumatic, and avionics faults.Use specialized diagnostic tools and testing equipment.Repair aircraft systems while maintaining manufacturer specifications.Coordinate with engineering teams for complex technical issues.Perform functional tests after repairs to verify serviceability.Engine & Component MaintenanceInspect aircraft engines for wear, leaks, corrosion, and damage.Perform engine servicing, oil changes, filter replacement, and component inspections.Maintain propellers, Auxiliary Power Units (APU), and fuel systems.Monitor engine performance and recommend corrective actions.Avionics & Electrical SystemsInspect communication and navigation systems.Maintain radar, autopilot, cockpit instrumentation, and electrical wiring.Test aircraft electronic systems for operational reliability.Ensure compliance with avionics maintenance procedures.Documentation & ComplianceComplete maintenance logs, inspection reports, and defect records.Maintain aircraft technical documentation accurately.Ensure compliance with aviation regulatory authorities.Certify aircraft for return to service after maintenance (where appropriately licensed).Follow company maintenance policies and quality assurance procedures.Safety & Quality AssuranceFollow all aviation safety regulations and standard operating procedures.Maintain clean and organized work areas.Ensure proper use of Personal Protective Equipment (PPE).Report safety hazards and technical discrepancies immediately.Participate in safety audits and quality inspections.Team CoordinationWork closely with pilots, technicians, quality inspectors, and operations staff.Coordinate maintenance schedules with flight operations.Assist junior technicians with technical guidance and training.Participate in emergency aircraft recovery and AOG (Aircraft on Ground) support.Required QualificationsDiploma or Bachelor's Degree in Aircraft Maintenance Engineering, Aeronautical Engineering, Mechanical Engineering, or Aerospace Engineering.DGCA-approved AME qualification or equivalent aviation authority certification is preferred.Valid Aircraft Maintenance Engineer License (where applicable).Type rating on specific aircraft is an advantage.Relevant experience in aircraft maintenance is preferred.Required SkillsStrong knowledge of aircraft systems and maintenance procedures.Excellent troubleshooting and fault diagnosis skills.Knowledge of aviation regulations and airworthiness standards.Ability to interpret aircraft maintenance manuals and engineering drawings.Strong analytical and problem-solving abilities.Excellent attention to detail.Good communication and teamwork skills.Ability to work under pressure and meet strict deadlines.Computer proficiency in maintenance management software.Good technical documentation skills.Technical KnowledgeAircraft StructuresGas Turbine EnginesHydraulic SystemsPneumatic SystemsElectrical SystemsAvionics SystemsFlight Control SystemsLanding Gear SystemsFuel SystemsAircraft DocumentationMaintenance PlanningAircraft Safety StandardsPreferred CertificationsDGCA Aircraft Maintenance Engineer LicenseEASA Part-66 License (preferred internationally)ICAO-compliant aviation trainingHuman Factors TrainingSafety Management System (SMS) TrainingFuel Tank Safety TrainingEWIS (Electrical Wiring Interconnection System) TrainingAircraft Type Rating CertificationWorking ConditionsAirport hangars, maintenance bases, and line maintenance stations.Rotational shifts including nights, weekends, and public holidays.Outdoor work in varying weather conditions.Physically demanding work involving standing, climbing, bending, and lifting equipment.Exposure to aircraft noise, fuels, lubricants, and hydraulic fluids while following strict safety procedures.Salary Range (India)Fresher: 3.5 - 6 LPA2-5 Years: 6 - 10 LPA5-10 Years: 10 - 18 LPALicensed/Type-Rated AME: 15 - 30+ LPA (depending on airline, aircraft type, and experience)

WE ARE HIRING QC ENGINEER POST : QUALITY ENGINEER / ASSISTANT MANAGEREDUCATION : DIPLOMA/ BE MECHANICAL EXPERIENCE : 5-8 YEAR IN ENGINEERING INDUSTRYSALARY: 50-60 K DEPEND ON INTERVIEW

Only for MUSLIM (TAMILNADU) Candidates can apply!!1. Job Title: Electrical Engineer2. City of Job: Qatar (Doha)3. Salary: QAR 3,000 + Free Food/OT (INR: 70,000 per month)4. No. of Opening: 05 Nos.5. Qualification: B.Tech Degree in Electrical Engineering - Mandatory6. Industry: Engineering / Oil & Gas / Construction / MEP7. Experience: Indian Experience Okay / Gulf Experience 8. Other Requirements: ONLY MUSLIM CANDIDATES -9. Benefits:*Accommodation Provided by Company*Medical Free*Transportation FreeNote: This requirement is for Muslim Candidates Only as per Client Demand.Recruiter Contact details:Mr. Abdul JALEEL-8940404074AddressNO.12 Ground Floor, Sun Complex Ultra Complex Street, Anna Nagar, Madurai, Tamil Nadu, India - 625020

WE ARE HIRING DESIGN ENGINEERENTRY LEVALMID LEVALSR LEVALDIPLOMA / BE MECHANICALEXPERIENCE : 3-5 YEAR SALARY : 30-50 K APPLY

WE ARE HIRING MECHANICAL ENGINEEREDUCATION : DIPLOMA/ BE MECHANICALEXPERIENCE : ANYLOCATION : MANJUSAR GIDCSALARY : 15-25 K DEPEND ON INTERVIEW

WE ARE HIRING ENGINEERPOST : SR DESIGN ENGINEEREDUCATION : BE MECHANICALEXPERIENCE : 5-8 YEAR LOCATION : MANJUSAR GIDC SALARY : 6-7 LPA WE ARE HIRING ENGINEERPOST : SR DESIGN ENGINEEREDUCATION : BE MECHANICALEXPERIENCE : 5-8 YEAR LOCATION : MANJUSAR GIDC SALARY : 6-7 LPA APPLY : tpo.vp2017@gmail.comCALL : 8306133342

Senior Electrical Design Engineer Engineering / ManufacturingExperience: 9-12 Years Location: BangaloreHiring Company: Talent Zone ConsultantBrief JD:We are hiring a Senior Electrical Design Engineer to lead electrical design activities, develop schematics and control panel designs, select components, prepare BOMs, and coordinate with engineering and manufacturing teams.Key Responsibilities:Design electrical schematics and control panels.Prepare BOMs and select suitable electrical components.Review drawings and ensure design compliance.Coordinate with engineering, production and project teams.Support testing, commissioning and troubleshooting.Provide technical guidance to junior engineers.Relevant Skillset:Electrical Design, Control Panel Design, Electrical Schematics, AutoCAD Electrical, EPLAN, Electrical Drawings, BOM, MCC, PCC, PLC, HMI, Control Systems, Panel Wiring, Component Selection, Design Review

An Aircraft Maintenance Engineer (AME) is responsible for inspecting, maintaining, repairing, troubleshooting, and certifying aircraft to ensure they are safe, airworthy, and compliant with aviation regulations. The role involves carrying out scheduled and unscheduled maintenance on aircraft systems, engines, avionics, electrical components, hydraulic systems, landing gear, and structural components while adhering to the standards established by aviation authorities.Key ResponsibilitiesAircraft Inspection & MaintenancePerform routine, preventive, scheduled, and unscheduled aircraft maintenance.Conduct daily, transit, weekly, A-check, B-check, C-check, and heavy maintenance inspections.Inspect aircraft structures, fuselage, wings, landing gear, flight controls, and engines.Diagnose and rectify aircraft defects using approved maintenance procedures.Replace, repair, and overhaul defective aircraft components.Ensure all maintenance tasks are completed according to the Aircraft Maintenance Manual (AMM).Troubleshooting & RepairsIdentify mechanical, hydraulic, electrical, pneumatic, and avionics faults.Use specialized diagnostic tools and testing equipment.Repair aircraft systems while maintaining manufacturer specifications.Coordinate with engineering teams for complex technical issues.Perform functional tests after repairs to verify serviceability.Engine & Component MaintenanceInspect aircraft engines for wear, leaks, corrosion, and damage.Perform engine servicing, oil changes, filter replacement, and component inspections.Maintain propellers, Auxiliary Power Units (APU), and fuel systems.Monitor engine performance and recommend corrective actions.Avionics & Electrical SystemsInspect communication and navigation systems.Maintain radar, autopilot, cockpit instrumentation, and electrical wiring.Test aircraft electronic systems for operational reliability.Ensure compliance with avionics maintenance procedures.Documentation & ComplianceComplete maintenance logs, inspection reports, and defect records.Maintain aircraft technical documentation accurately.Ensure compliance with aviation regulatory authorities.Certify aircraft for return to service after maintenance (where appropriately licensed).Follow company maintenance policies and quality assurance procedures.Safety & Quality AssuranceFollow all aviation safety regulations and standard operating procedures.Maintain clean and organized work areas.Ensure proper use of Personal Protective Equipment (PPE).Report safety hazards and technical discrepancies immediately.Participate in safety audits and quality inspections.Team CoordinationWork closely with pilots, technicians, quality inspectors, and operations staff.Coordinate maintenance schedules with flight operations.Assist junior technicians with technical guidance and training.Participate in emergency aircraft recovery and AOG (Aircraft on Ground) support.Required QualificationsDiploma or Bachelor's Degree in Aircraft Maintenance Engineering, Aeronautical Engineering, Mechanical Engineering, or Aerospace Engineering.DGCA-approved AME qualification or equivalent aviation authority certification is preferred.Valid Aircraft Maintenance Engineer License (where applicable).Type rating on specific aircraft is an advantage.Relevant experience in aircraft maintenance is preferred.Required SkillsStrong knowledge of aircraft systems and maintenance procedures.Excellent troubleshooting and fault diagnosis skills.Knowledge of aviation regulations and airworthiness standards.Ability to interpret aircraft maintenance manuals and engineering drawings.Strong analytical and problem-solving abilities.Excellent attention to detail.Good communication and teamwork skills.Ability to work under pressure and meet strict deadlines.Computer proficiency in maintenance management software.Good technical documentation skills.Technical KnowledgeAircraft StructuresGas Turbine EnginesHydraulic SystemsPneumatic SystemsElectrical SystemsAvionics SystemsFlight Control SystemsLanding Gear SystemsFuel SystemsAircraft DocumentationMaintenance PlanningAircraft Safety StandardsPreferred CertificationsDGCA Aircraft Maintenance Engineer LicenseEASA Part-66 License (preferred internationally)ICAO-compliant aviation trainingHuman Factors TrainingSafety Management System (SMS) TrainingFuel Tank Safety TrainingEWIS (Electrical Wiring Interconnection System) TrainingAircraft Type Rating CertificationWorking ConditionsAirport hangars, maintenance bases, and line maintenance stations.Rotational shifts including nights, weekends, and public holidays.Outdoor work in varying weather conditions.Physically demanding work involving standing, climbing, bending, and lifting equipment.Exposure to aircraft noise, fuels, lubricants, and hydraulic fluids while following strict safety procedures.Salary Range (India)Fresher: 3.5 - 6 LPA2-5 Years: 6 - 10 LPA5-10 Years: 10 - 18 LPALicensed/Type-Rated AME: 15 - 30+ LPA (depending on airline, aircraft type, and experience)

An Aircraft Maintenance Engineer (AME) is responsible for inspecting, maintaining, repairing, troubleshooting, and certifying aircraft to ensure they are safe, airworthy, and compliant with aviation regulations. The role involves carrying out scheduled and unscheduled maintenance on aircraft systems, engines, avionics, electrical components, hydraulic systems, landing gear, and structural components while adhering to the standards established by aviation authorities.Key ResponsibilitiesAircraft Inspection & MaintenancePerform routine, preventive, scheduled, and unscheduled aircraft maintenance.Conduct daily, transit, weekly, A-check, B-check, C-check, and heavy maintenance inspections.Inspect aircraft structures, fuselage, wings, landing gear, flight controls, and engines.Diagnose and rectify aircraft defects using approved maintenance procedures.Replace, repair, and overhaul defective aircraft components.Ensure all maintenance tasks are completed according to the Aircraft Maintenance Manual (AMM).Troubleshooting & RepairsIdentify mechanical, hydraulic, electrical, pneumatic, and avionics faults.Use specialized diagnostic tools and testing equipment.Repair aircraft systems while maintaining manufacturer specifications.Coordinate with engineering teams for complex technical issues.Perform functional tests after repairs to verify serviceability.Engine & Component MaintenanceInspect aircraft engines for wear, leaks, corrosion, and damage.Perform engine servicing, oil changes, filter replacement, and component inspections.Maintain propellers, Auxiliary Power Units (APU), and fuel systems.Monitor engine performance and recommend corrective actions.Avionics & Electrical SystemsInspect communication and navigation systems.Maintain radar, autopilot, cockpit instrumentation, and electrical wiring.Test aircraft electronic systems for operational reliability.Ensure compliance with avionics maintenance procedures.Documentation & ComplianceComplete maintenance logs, inspection reports, and defect records.Maintain aircraft technical documentation accurately.Ensure compliance with aviation regulatory authorities.Certify aircraft for return to service after maintenance (where appropriately licensed).Follow company maintenance policies and quality assurance procedures.Safety & Quality AssuranceFollow all aviation safety regulations and standard operating procedures.Maintain clean and organized work areas.Ensure proper use of Personal Protective Equipment (PPE).Report safety hazards and technical discrepancies immediately.Participate in safety audits and quality inspections.Team CoordinationWork closely with pilots, technicians, quality inspectors, and operations staff.Coordinate maintenance schedules with flight operations.Assist junior technicians with technical guidance and training.Participate in emergency aircraft recovery and AOG (Aircraft on Ground) support.Required QualificationsDiploma or Bachelor's Degree in Aircraft Maintenance Engineering, Aeronautical Engineering, Mechanical Engineering, or Aerospace Engineering.DGCA-approved AME qualification or equivalent aviation authority certification is preferred.Valid Aircraft Maintenance Engineer License (where applicable).Type rating on specific aircraft is an advantage.Relevant experience in aircraft maintenance is preferred.Required SkillsStrong knowledge of aircraft systems and maintenance procedures.Excellent troubleshooting and fault diagnosis skills.Knowledge of aviation regulations and airworthiness standards.Ability to interpret aircraft maintenance manuals and engineering drawings.Strong analytical and problem-solving abilities.Excellent attention to detail.Good communication and teamwork skills.Ability to work under pressure and meet strict deadlines.Computer proficiency in maintenance management software.Good technical documentation skills.Technical KnowledgeAircraft StructuresGas Turbine EnginesHydraulic SystemsPneumatic SystemsElectrical SystemsAvionics SystemsFlight Control SystemsLanding Gear SystemsFuel SystemsAircraft DocumentationMaintenance PlanningAircraft Safety StandardsPreferred CertificationsDGCA Aircraft Maintenance Engineer LicenseEASA Part-66 License (preferred internationally)ICAO-compliant aviation trainingHuman Factors TrainingSafety Management System (SMS) TrainingFuel Tank Safety TrainingEWIS (Electrical Wiring Interconnection System) TrainingAircraft Type Rating CertificationWorking ConditionsAirport hangars, maintenance bases, and line maintenance stations.Rotational shifts including nights, weekends, and public holidays.Outdoor work in varying weather conditions.Physically demanding work involving standing, climbing, bending, and lifting equipment.Exposure to aircraft noise, fuels, lubricants, and hydraulic fluids while following strict safety procedures.Salary Range (India)Fresher: 3.5 - 6 LPA2-5 Years: 6 - 10 LPA5-10 Years: 10 - 18 LPALicensed/Type-Rated AME: 15 - 30+ LPA (depending on airline, aircraft type, and experience)

We are looking for an Aircraft Maintenance Engineer to join our team in Surat. This position requires an individual with a keen eye for detail and a passion for aviation.Key Responsibilities:- Conduct Inspections: Regularly check aircraft systems and components to ensure they meet safety and performance standards.- Perform Maintenance: Execute scheduled maintenance tasks and repairs on aircraft, ensuring all work is compliant with regulations and procedures.- Troubleshoot Issues: Identify and diagnose potential problems in aircraft systems and components, applying effective solutions to ensure operational safety.- Keep Records: Maintain accurate documentation of inspections, maintenance, and repairs performed on each aircraft to comply with regulatory standards.- Collaborate with Teams: Work closely with pilots, ground crew, and other engineers to communicate needs and ensure the aircraft are ready for operation.Required Skills and Expectations:The ideal candidate should have a strong understanding of aircraft systems and maintenance procedures, along with problem-solving abilities. Good communication skills are essential for working with a team in a collaborative environment. A genuine interest in aviation technology and safety practices is crucial. Since this is an entry-level position, we welcome applications from recent graduates or individuals with up to six years of experience. Candidates should have at least completed their 12th grade education. A proactive attitude towards learning and adapting to new challenges in the aviation sector is expected.

As a Roustabout, you will be an essential part of our team, working in the oil and gas industry. Your primary responsibilities will include:- Equipment Maintenance: You will assist in maintaining and repairing equipment used in drilling and production operations to ensure they are safe and operational.- General Labor Tasks: You will perform various manual labor tasks, such as lifting and moving heavy items, to support your team and keep the work area organized.- Site Preparation: You will help prepare the drilling site by clearing the area and setting up necessary equipment, which is crucial for smooth operations.- Assisting Operators: You will work under the guidance of experienced operators, assisting them with their tasks to gain practical knowledge and experience in the field.- Safety Compliance: You will follow safety protocols and wear protective gear to ensure a safe working environment for yourself and your colleagues.To succeed in this role, we expect you to have strong physical stamina for demanding tasks and the ability to work well as part of a team. A background in mechanical work or vocational training is a plus, but not mandatory. Communication skills are important for working with others effectively. You should be willing to learn and take direction, as well as maintain a proactive attitude to handle challenges as they arise. A commitment to safety and attention to detail are essential qualities we are looking for.

Description : Develop and formulate new food products based on market requirements.Test and improve existing food products, recipes, and formulations.Conduct quality checks on raw materials, ingredients, and finished products.Ensure compliance with food safety, hygiene, and quality standards.Monitor food processing and production activities.Conduct shelf-life and stability studies for food products.Perform sensory evaluation of food products for taste, texture, aroma, and appearance.Research new ingredients, food technologies, and preservation methods.Coordinate with production, quality control, and R&D teams.Identify and resolve product quality and processing issues.Maintain product specifications, laboratory records, and technical reports.Assist in developing nutritional information and product labels.Ensure proper storage and handling of ingredients and finished products.Support audits and maintain food safety documentation.Stay updated on food industry regulations, standards, and new technologies.

Key responsibilities:Assess patients' physical conditions, mobility, and functional limitations.Develop individualized treatment and rehabilitation plans.Provide exercises and therapeutic techniques to improve mobility and strength.Treat patients with musculoskeletal, neurological, and sports-related conditions.Perform therapeutic exercises, stretching, and mobility training.Use appropriate physiotherapy equipment and treatment techniques.Monitor patients' progress and modify treatment plans when required.Educate patients on home exercises and proper body mechanics.Help patients improve balance, coordination, flexibility, and physical function.Maintain accurate patient records and treatment documentation.

Key Responsibilities:Install, inspect, maintain, and troubleshoot biomedical and medical equipment.Perform preventive and corrective maintenance of medical devices.Ensure proper calibration and functioning of equipment.Coordinate with hospital staff and equipment vendors for technical support.Maintain equipment service records, maintenance logs, and documentation.Assist in equipment procurement, evaluation, and installation.Ensure medical equipment complies with safety and quality standards.Provide technical guidance and basic training to healthcare staff.Identify equipment issues and coordinate timely repairs.Follow hospital safety procedures and biomedical equipment protocols.Eligibility / Qualification:B.E./B.Tech in Biomedical Engineering.Freshers and experienced candidates can apply.Good communication and problem-solving skills.Basic knowledge of medical equipment and troubleshooting is preferred.

Key Responsibilities Identify and select vendors or suppliers for various products and services. Conduct market research to find reliable suppliers and products. Solicit quotations and negotiate pricing and terms with suppliers. Prepare and issue purchase orders to suppliers based on departmental requirements. Ensure that the purchase orders are accurate, clear, and processed promptly with proper approval from superior/manager. Monitor order progress and ensure timely delivery of materials. Build and maintain strong relationships with existing suppliers. Evaluate supplier performance regularly, ensuring timely deliveries and quality standards. Resolve any supplier-related issues or concerns promptly. Maintain accurate records of all purchase transactions, including supplier contracts, purchase orders, and invoices. Ensure compliance with the organization

Job Title: Hardware Design Engineer (Grade 1)Department: R&DQualification: Bachelor's Degree in Electronics & Communication Engineering / Electrical & Electronics EngineeringCompany DescriptionEDS India, located in Janakpuri & Faridabad, specializes in Electronic Product Design, Embedded Hardware Development, PCBDesign, Embedded Software, and Product Engineering Services. We provide complete hardware development solutions fromconcept to production, including circuit design, schematic capture, PCB layout, prototype development, testing, validation, andmanufacturing support. Our expertise spans industrial automation, communication systems, IoT, embedded computing, railwayelectronics, power electronics, and LED technologies.Job OverviewWe are seeking a motivated and detail-oriented Hardware Design Engineer (Grade 1) to join our Hardware Design Team. Thecandidate will work under the guidance of senior hardware engineers and actively participate in the complete hardwaredevelopment lifecycle-from requirement analysis, circuit design, schematic creation, component selection, PCB layout review,prototype bring-up, debugging, testing, validation, and documentation. The ideal candidate should possess a strongunderstanding of analog and digital electronics, schematic design, PCB design principles, and hardware debugging techniques.Key Responsibilities Designing analog, digital, mixed-signal, and power electronic circuits, preferably high-speed designs. Develop and maintain hardware schematics using Altium Designer (or equivalent PCB CAD tools). Support complete PCB design activities, including component placement, layout review, routing review, and manufacturingconsiderations. Perform component selection based on electrical specifications, availability, cost, and reliability. Prepare circuit calculations, design documentation, BOMs, engineering change notes, and technical reports. Design and Review schematics and PCB layouts for electrical correctness and manufacturability. Participate in prototype assembly, board bring-up, hardware debugging, and validation. Perform functional testing and design verification using laboratory equipment. Analyse circuit failures and support root cause analysis (RCA). Verify signal integrity, power integrity, grounding, and EMI/EMC design practices. Support DFM (Design for Manufacturing), DFA (Design for Assembly), and DFT (Design for Test) activities. Ensure compliance with company design standards and engineering documentation practices.Key Technical Skills Good understanding of Analog, Digital, Mixed-Signal, and Power Electronics. Strong knowledge of electronic circuit design fundamentals. Experience with schematic design using Altium Designer (preferred) or similar PCB CAD tools. Basic understanding of multilayer PCB design concepts. Knowledge of PCB stack-up, component placement, routing, grounding, power planes, and decoupling techniques. Understanding of high-speed PCB design fundamentals, differential pair routing, impedance matching, and signal integrity. Knowledge of PCB manufacturing processes, fabrication, and assembly requirements. Familiarity with PCB design guidelines including DFM, DFA, and DFT. Understanding of hardware interfaces such as I2C, SPI, UART, USB, CAN, LIN, RS232, RS485, Ethernet, and GPIO. Knowledge of microcontrollers, processors, memories, power supplies, clock circuits, and peripheral interfaces. Ability to read and interpret component datasheets and reference designs. Familiarity with hardware debugging using oscilloscopes, logic analysers, multimeters, function generators, and DC powersupplies. Understanding of hardware validation, functional testing, and troubleshooting techniques. Knowledge of ESD, EMI/EMC, protection circuits, and hardware reliability concepts. Familiarity with BOM preparation, component lifecycle management, and engineering documentation. Good analytical, troubleshooting, and problem-solving skills. Good communication and teamwork skills.

As an Embedded Design Engineer, you will play a crucial role in the development and design of embedded systems for various applications. This position requires both technical expertise and problem-solving skills. Key Responsibilities:- Embedded System Design: Design and develop embedded systems, ensuring they meet project requirements and specifications.- Coding and Testing: Write and test code for various microcontrollers and embedded devices, verifying functionality and performance.- Hardware Integration: Collaborate with hardware engineers to integrate software components, ensuring seamless operation of embedded systems.- Debugging and Troubleshooting: Identify and resolve issues in embedded systems through systematic testing and debugging methodologies.- Documentation: Maintain thorough documentation of design processes, code revisions, and testing results to ensure transparency and reproducibility.Required Skills and Expectations:Candidates should possess a minimum of 2 to 4 years of experience in embedded systems design and development. A background in electronics or computer engineering with a degree or professional qualification is essential. Proficiency in programming languages such as C or C++ and experience with microcontrollers is expected. Familiarity with tools for embedded software development and debugging is also important. Strong analytical skills and attention to detail are necessary, as they contribute to the quality and reliability of embedded designs. Good communication skills are essential to collaborate effectively with team members and present findings clearly.

We are seeking a Senior Design Engineer with 8 to 11 years of experience to join our team at our Pali Road location. This role is suited for male candidates who hold a diploma in engineering or a related field. Key Responsibilities:- Design Development: Create innovative designs for products or systems while ensuring they meet functionality, safety, and industry standards.- Project Management: Collaborate with project teams to oversee design projects from conception through to delivery, ensuring timelines and budgets are met.- Technical Analysis: Conduct detailed analysis and simulations of designs to assess performance and efficiency, refining designs based on test results.- Collaboration: Work closely with cross-functional teams, including manufacturing and quality control, to ensure designs are feasible and can be produced effectively.- Problem Solving: Identify issues during the design and development process, proposing effective solutions to ensure project success and quality standards.- Documentation: Maintain accurate records of design specifications, changes, and updates for future reference and compliance purposes.Required Skills and Expectations:Candidates must have strong knowledge in design software and tools such as CAD. Excellent problem-solving skills and attention to detail are essential for this role. The ideal candidate should possess good communication and teamwork abilities, enabling collaboration across various departments. A proactive approach to learning new design trends and technologies is expected, as well as a commitment to continuous improvement in both personal performance and project outcomes.

We are urgently hiring Aircraft Maintenance Junior Engineers to support aircraft inspection, maintenance, troubleshooting, servicing, and repair activities at airports and aviation maintenance facilities. The selected candidates will work under authorized engineers and maintenance supervisors to ensure aircraft are maintained in accordance with approved maintenance procedures, safety standards, and regulatory requirements.Key ResponsibilitiesPerform routine and scheduled aircraft maintenance activities.Assist in inspection, servicing, troubleshooting, and repair of aircraft systems and components.Conduct visual inspections and identify defects, damage, leaks, or abnormal conditions.Assist licensed/certifying engineers during maintenance and rectification work.Carry out maintenance tasks according to approved Aircraft Maintenance Manuals (AMM), technical documentation, and company procedures.Assist with removal, installation, testing, and replacement of aircraft components.Perform basic troubleshooting of mechanical, electrical, hydraulic, pneumatic, and avionics systems as applicable.Maintain accurate maintenance records, work cards, inspection reports, and technical documentation.Ensure proper use and control of tools, ground support equipment, and maintenance equipment.Follow aircraft maintenance safety procedures and airport safety regulations.Ensure FOD prevention and maintain a clean and safe working environment.Report aircraft defects, technical issues, and unsafe conditions to the appropriate supervisor.Assist with aircraft turnaround and line maintenance activities when required.Support aircraft servicing activities, including relevant ground maintenance tasks.Follow company quality, safety, security, and compliance procedures.Participate in shift-based, night, weekend, and holiday duties as required.Coordinate with maintenance engineers, supervisors, operations, and other airport teams.Maintain confidentiality and proper handling of aircraft technical information.For Junior EngineersAssist senior/authorized engineers in aircraft maintenance and inspection.Review technical manuals and maintenance instructions before performing assigned tasks.Support troubleshooting and fault isolation activities.Assist in technical documentation and maintenance record preparation.Monitor maintenance activities for compliance with approved procedures.Develop practical knowledge of aircraft systems, maintenance practices, and aviation regulations.For Aircraft Maintenance TechniciansPerform assigned mechanical/electrical maintenance tasks under appropriate supervision.Inspect aircraft structures, components, and systems for defects.Remove and install aircraft components as authorized.Use maintenance tools and test equipment correctly.Assist with servicing, repair, inspection, and functional testing.Maintain tools and equipment in serviceable condition.Follow maintenance instructions and safety procedures at all times.Required QualificationsJunior Engineer:Diploma / Bachelor's degree in Aircraft Maintenance Engineering, Aeronautical Engineering, Aerospace Engineering, Mechanical Engineering, Avionics, or a related field, depending on the employer's requirements.Relevant AME training/licensing or regulatory eligibility may be required for specific positions.Technician:ITI / Diploma / relevant technical qualification in Aircraft Maintenance, Aviation, Mechanical, Electrical, Electronics, or related discipline.Aircraft maintenance training or relevant aviation experience is an advantage.Preferred SkillsKnowledge of aircraft maintenance procedures and safety practices.Basic understanding of aircraft systems and components.Ability to read and understand technical manuals and maintenance documentation.Good troubleshooting and problem-solving skills.Strong attention to detail.Good mechanical/electrical aptitude.Ability to work effectively in a team.Good communication and reporting skills.Ability to work under time-sensitive airport operations.Willingness to work in shifts, including nights, weekends, and holidays.Strong commitment to aviation safety and quality standards.ExperienceFreshers: May be considered for trainee/junior positions subject to qualification and employer requirements.Experienced: Candidates with aircraft maintenance, MRO, airline, airport, line maintenance, or base maintenance experience may be preferred for experienced positions.Working ConditionsWork may be performed on aircraft stands, hangars, maintenance facilities, and airport operational areas.Candidates should be comfortable working outdoors and around aircraft and ground-support equipment.Shift duties may include early mornings, nights, weekends, and public holidays.The role may require standing, walking, climbing aircraft access equipment, and handling maintenance tools/equipment.Key CompetenciesTechnical Knowledge Aircraft Maintenance Troubleshooting Safety Awareness Quality Control Teamwork Attention to Detail Technical Documentation Problem Solving Time ManagementSalary & BenefitsSalary: As per company standards and candidate's qualification/experienceShift allowance may be applicable.Overtime and other benefits may be provided according to company policy.Training and career-development opportunities may be available.Statutory benefits may apply based on employer policy and applicable regulations.

We are looking for an Aircraft Maintenance Engineer in Chennai. This role is essential in ensuring the safety and reliability of aircraft by performing maintenance, repairs, and inspections. The ideal candidate will have a passion for aviation and a keen eye for detail.Key Responsibilities:- Perform Routine Maintenance: Conduct regular checks on aircraft systems and components to ensure they are functioning correctly and safely.- Inspect Aircraft: Carry out detailed inspections before and after flights to identify any potential issues or wear and tear.- Repair and Replace Parts: Fix or replace any faulty parts, ensuring that all repairs meet industry standards and regulations.- Document Work: Keep accurate records of all maintenance performed, including any repairs and inspections, to ensure compliance with aviation regulations.- Collaborate with Team: Work closely with other engineers and technicians to ensure smooth operations and share knowledge on maintenance practices.Required Skills and Expectations:- A minimum of a 12th-grade education is required; prior experience in aircraft maintenance is a plus.- Strong problem-solving skills to identify and resolve issues effectively.- Attention to detail is crucial for safeguarding aircraft safety and operational efficiency.- Effective communication skills are necessary to work collaboratively with team members and report findings clearly.- Must be willing to work in an office environment and be flexible with working hours to meet operational needs.

Job For Site EngineerDepartment/Domain: Construction / Site EngineerExperience. 1 yrs to 4 yearsSalary - 22000 - 26000 (Monthly)Key Responsibilities:Supervising day-to-day site operations, construction activities, and structural works.Ensuring execution aligns with architectural drawings, structural plans, and quality standards.Coordinating with contractors, vendors, architects, and project managers on-site.Monitoring material consumption, quality control, and safety compliance.Check dimensions, levels, materials, and workmanship as per drawings and specifications.Prepare and maintain daily site reports, progress reports, measurement records, and site documentation.Ensure proper implementation of safety practices at the construction site. Review drawings and communicate any discrepancies or technical requirements to the concerned senior.Maintain proper records of site instructions, approvals, revisions, and executed work.Requirements:Degree / Diploma in Civil Engineering.Relevant site execution experience in residential/commercial/Industrial / Architectural projects / Real Estate Preferred.Strong technical, communication, and site supervision skills.

Sales Executive - Precision MachiningWe are looking for a Sales Executive who is willing to generate new business opportunities, develop strong customer relationships, and drive business growth for our precision machining solutions.Job DescriptionCompany is launching a new Precision Machining Operations Division. We are seeking a technical and results-driven Sales Executive to drive business growth, expand our client base, and showcase our expanded manufacturing capabilities to B2B clients.Key Responsibilities1. Prospect, pitch, and secure new B2B clients for custom precision machining services.2. Upsell existing customer base to acquire machining business and expand key accounts.3. Analyze customer requirements, engineering drawings, and specifications to offer viable machining and manufacturing solutions.4. Manage the end-to-end sales cycle, including RFQs (Request for Quotations), proposal preparation, negotiation, and deal closure.5. Work closely with the engineering and production teams to evaluate project feasibility, pricing, and delivery schedules.Requirements & Qualifications1. Diploma / B.E. / B.Tech in Mechanical or Production2. Experience: 1 - 5 years required3. Basic to advance understanding of precision machining / part manufacturing operations, including CNC, VMC, Turning, Milling, Hobbing, Broaching, Molding, Over molding, and surface treatments like Hardening & Anodizing.4. Ability to read/interpret engineering drawings, strong negotiation skills, and clear communication.5. Prior experience in B2B technical sales, industrial sales, or business development within manufacturing / machining sectorWhat We Offer1. Opportunity to lead sales for a brand-new, high-growth division.2. Competitive compensation package with performance incentives

Job Description:Understanding customer needs and requirements to develop effective quality control processes. Devising and reviewing specifications for products or processes. Setting requirements for raw material or intermediate products for suppliers and monitoring their compliance.Rejection Control in % & good knowledge of Production Process.charge of supervising the production process to make sure that all products meet consistent standards. Their duties include developing and implementing quality control tests, inspecting products at various stages and writing reports documenting production issues.

Provide on-site support for POS, hardware, software, and networking issues.Install and configure POS machines, switches, routers, printers, laptops, desktops, andperipherals.Install Windows OS and troubleshoot basic Windows/Linux issues.Troubleshoot printers, barcode scanners, receipt printers, cash drawers, and other POSperipherals.Diagnose hardware, software, network, connectivity, and power-related issues.Perform basic LAN, Wi-Fi, IP, and network troubleshooting.Lay, crimp, terminate, and patch Ethernet/network cables.Test systems after installation or repair.Respond to service requests and coordinate with internal teams when required.Maintain service records and complete assigned requests within timelines.Travel to client locations as required.

Provide on-site support for POS, hardware, software, and networking issues. Install and configure POS machines, switches, routers, printers, laptops, desktops, andperipherals. Install Windows OS and troubleshoot basic Windows/Linux issues. Troubleshoot printers, barcode scanners, receipt printers, cash drawers, and other POSperipherals. Diagnose hardware, software, network, connectivity, and power-related issues. Perform basic LAN, Wi-Fi, IP, and network troubleshooting. Lay, crimp, terminate, and patch Ethernet/network cables. Test systems after installation or repair. Respond to service requests and coordinate with internal teams when required. Maintain service records and complete assigned requests within timelines. Travel to client locations as required

As a Technical Trainer, you will play a crucial role in enhancing the skills and knowledge of our employees. Your primary goal will be to ensure that team members are proficient in the technical skills required for their roles.- Develop Training Programs: Create effective training materials and courses that focus on technical skills required for various positions within the organization, ensuring the content is relevant and up-to-date.- Conduct Training Sessions: Lead hands-on training sessions and workshops that engage employees and facilitate learning. Adapt your teaching methods to accommodate different learning styles.- Evaluate Training Outcomes: Assess the effectiveness of training programs by gathering feedback and conducting assessments. Use this information to make necessary adjustments and improve future training sessions.- Collaborate with Departments: Work closely with different departments to understand their specific training needs and create tailored programs that address those requirements.- Stay Updated: Keep abreast of the latest industry trends and technologies to ensure the training content is current and relevant.To be successful in this role, you should possess a Bachelors degree in Engineering (B.E.) and have 1 to 3 years of experience in a similar capacity. You must have excellent communication skills, a strong understanding of technical concepts, and the ability to simplify complex information. Patience, creativity in training delivery, and a passion for teaching are essential traits for this role. Being a male candidate is a specific requirement for this position.

We are looking for a Technical Trainer to join our team in Jaipur. The ideal candidate should have 1 to 2 years of experience in training and a Bachelors degree in Engineering. The role involves working full-time at our office and is open to male candidates.Key Responsibilities:- Conduct Training Sessions: Deliver engaging training programs to enhance the technical skills of employees, ensuring they are up-to-date with relevant technologies and tools.- Develop Training Materials: Create and update learning resources such as presentations, manuals, and online content to support the training process.- Assess Learner Performance: Evaluate trainees through tests and practical assessments to ensure they comprehend the material and can apply their skills effectively.- Provide Feedback: Offer constructive feedback to participants to help them improve their skills and knowledge, fostering a supportive learning environment.- Collaborate with Teams: Work closely with different departments to understand their training needs and align programs with organizational goals.Required Skills and Expectations:The ideal candidate should have strong communication and presentation skills to engage and motivate learners effectively. A solid understanding of technical concepts related to software, coding, and IT systems is essential. Experience in training methodologies and adult learning principles will be an advantage. The candidate should be proactive, adaptable, and possess effective problem-solving abilities, allowing them to address the diverse needs of trainees. Lastly, a collaborative attitude and the ability to work in a team-oriented environment are crucial for success in this role.

### Key Responsibilities* Supervise and manage day-to-day road construction activities at the site.* Execute and monitor *road leveling and grading* work.* Handle *WBM (Water Bound Macadam)* road construction activities.* Supervise *cement concrete road* construction.* Manage and monitor *drainage and road drain* works.* Ensure construction work is carried out as per drawings, specifications, and quality standards.* Coordinate with contractors, site workers, suppliers, and project management teams.* Monitor material usage, quality, and site progress.* Prepare and maintain daily site progress reports.* Ensure proper execution of work within the planned schedule.### Required Skills* Road Construction & Site Execution* Road Leveling & Grading* WBM Road Construction* Cement Concrete Road Construction* Drainage & Drain Works* Quantity & Material Management* Site Supervision* Quality Control* Knowledge of Civil Engineering Drawings

(SR) SALES ENGINEER / ASST MANAGER SALES required urgently forReputed ad established list electrical and power components mfg co.Reporting location - MumbaiTerritory to handle - Mumbai, suburbs, Thane, Thane Dist, Palghar Dist, Navi MumbaiSalary - Rs 30,000 to 65,000 pm + Bonus + attractive incentivesWeekly off - Sundays CompanyReputed and established mfr of power components and industrial electrical products - transformers, panels, switches, etcListed co.Modern plant at MaharashtraPan-India marketSupplies to power boards, industrial customers, housing societies, builders & contractors, etc.REQUIREDDiploma/ ITI/ Degree in Electrical / Electronic Engg with min 3 years field experience selling similar industrial electrical products/ solutionsGood technical knowledge of specifications and applicationsGood market and customer knowledgeCandidates having contacts with dealers, electrical contractors & consultants, industrial B2B customers, etc requiredAge profile - 24 years and above__________________________________________SUITABLE & INTERESTED CANDIDATES MUST RESPOND WITH FOLLOWING DETAILS URGENTLY..1. UPDATED RESUME2. PRESENT / LAST SALARY (with any recent salary proof)3. NOTICE PERIOD FOR JOININGMail to rankandfile94@yahoo.co.in (OR) whatsapp to 9820824647______________________________________CALL/ CONTACT URGENTLYSHOBANARank & File consultants Mumbai9820824647

(SR) SALES ENGINEER / ASST MANAGER SALES required urgently forReputed ad established list electrical and power components mfg co.Reporting location - MumbaiTerritory to handle - Mumbai, suburbs, Thane, Thane Dist, Palghar Dist, Navi MumbaiSalary - Rs 30,000 to 65,000 pm + Bonus + attractive incentivesWeekly off - Sundays CompanyReputed and established mfr of power components and industrial electrical products - transformers, panels, switches, etcListed co.Modern plant at MaharashtraPan-India marketSupplies to power boards, industrial customers, housing societies, builders & contractors, etc.REQUIREDDiploma/ ITI/ Degree in Electrical / Electronic Engg with min 3 years field experience selling similar industrial electrical products/ solutionsGood technical knowledge of specifications and applicationsGood market and customer knowledgeCandidates having contacts with dealers, electrical contractors & consultants, industrial B2B customers, etc requiredAge profile - 24 years and above__________________________________________SUITABLE & INTERESTED CANDIDATES MUST RESPOND WITH FOLLOWING DETAILS URGENTLY..1. UPDATED RESUME2. PRESENT / LAST SALARY (with any recent salary proof)3. NOTICE PERIOD FOR JOININGMail to rankandfile94@yahoo.co.in (OR) whatsapp to 9820824647______________________________________CALL/ CONTACT URGENTLYSHOBANARank & File consultants Mumbai9820824647

GOOD OPPORTUNITY FOR INDIAN FRESHERS !! - OMANDIRECT CLIENT INTERVIEW - 17-09-261. POST 1: CIVIL ENGINEERSALARY: 220 - 350 OMR (INR 55,000 - 88,000):FREE FOOD + FREE ACCOMMODATION9 Hours Duty + OTEmployment Visa in One WeekAge Limit: Upto 46 YearsQualification: BE & Diploma Civil OKExperience: Minimum 3 Years Experience MustContact detail:-Star Travels And ConsultancyMr. Abdul Jaleel-8940404074Address-AddressNO.12 Ground Floor, Sun Complex Ultra Complex Street, Anna Nagar, Madurai, Tamil Nadu, India - 625020

Job Title: Mechanical Engineer - Oil & Gas Company - Dubai - FresherJob Description:Urgently Required Mechanical Engineer for a Leading Oil and Gas Company in Dubai, UAE.We are hiring BE Mechanical Fresher candidates for Oil & Gas Project.Job Details:*Position: Mechanical Engineer*Company Type: Oil and Gas Company*Location: Dubai, United Arab Emirates*Salary: 2000 AED Basic + 500 AED Allowance (Total 2500 AED)*Qualification: BE in Mechanical Engineering*Experience: Fresher - 0 to 2 Years (Fresher Can Apply)*Age Limit: 23 to 37 Years*Gender: MaleJob Responsibilities:*Assist in mechanical maintenance and operations in oil & gas plant*Understanding of engineering drawings and plant equipment*Quality checking and reporting*Coordination with senior engineers*Follow safety rules and regulationsInterview Mode: Document Verification & Online InterviewImportant Note: No Food and No Accommodation Provided by Company. Candidates should be ready to manage on their own.Benefits:*Good opportunity for Fresher in Oil & Gas sector*Career growth in UAEInterested candidates apply immediately with updated CV, Passport, Education Certificates.Contact details:-Mr. Abdul Jaleel-8940404074 /9944161395Address-Address - NO.12 Ground Floor, Sun Complex Ultra Complex Street, City - Madurai, State - tamil naduIndia

WANTED FOR SINGAPORE - Leading Electrical CompanyPosition: Electrician (Gulf / SG U-TURN) - 25 NosRequirements:- Must know Glanding, Termination, Tray Fitting Works- Must have experience as Electrician in Gulf or Singapore- PCM Permit will be providedSalary & Benefits:- Salary: $22 to $26 SGD Per Hour- Accommodation & Transport Free by Company- 8 Hrs Duty + Overtime Available- Food By OwnEligibility:- Age upto 40 Years- Online InterviewInterested candidates apply immediately.Contact Person - Mr. Abdul JaleelAddress - NO.12 Ground Floor, Sun Complex Ultra Complex Street, Anna Nagar, Madurai, Tamil Nadu, India - 625020