Engineering Job Vacancies in Pune

Job Profile & Key Responsibilities:-A Service Engineer at Calitron Calibration Laboratory (OPC) Pvt. Ltd. is responsible for the installation, maintenance, testing, and field or lab calibration of electrical, electronics, mechanical, thermal, and flow instrumentation. On-Site & In-Lab Service: Handle both internal lab duties in Bhosari, Pune, and field-based service visits to customer sites for equipment inspection and maintenance (travel within city/country as required). Installation & Troubleshooting: Install, diagnose, and troubleshoot industrial test and measurement equipment. Documentation & Compliance: Maintain calibration certificates, service reports, logbooks, and trace measurement data accurately to ensure regulatory compliance. Customer Support: Coordinate with clients for equipment servicing, technical queries, and turnaround support.

Job TitleAircraft Maintenance Engineer (AME)DepartmentAircraft Maintenance / EngineeringLocationsPuneMumbaiNagpurNashikShirdiGoaAmravatiAurangabadKolhapurNavi MumbaiSolapurJob SummaryAn Aircraft Maintenance Engineer (AME) is responsible for inspecting, maintaining, repairing, troubleshooting, and certifying aircraft to ensure they are safe, airworthy, and compliant with aviation regulations. The role involves carrying out scheduled and unscheduled maintenance on aircraft systems, engines, avionics, electrical components, hydraulic systems, landing gear, and structural components while adhering to the standards established by aviation authorities.Key ResponsibilitiesAircraft Inspection & MaintenancePerform routine, preventive, scheduled, and unscheduled aircraft maintenance.Conduct daily, transit, weekly, A-check, B-check, C-check, and heavy maintenance inspections.Inspect aircraft structures, fuselage, wings, landing gear, flight controls, and engines.Diagnose and rectify aircraft defects using approved maintenance procedures.Replace, repair, and overhaul defective aircraft components.Ensure all maintenance tasks are completed according to the Aircraft Maintenance Manual (AMM).Troubleshooting & RepairsIdentify mechanical, hydraulic, electrical, pneumatic, and avionics faults.Use specialized diagnostic tools and testing equipment.Repair aircraft systems while maintaining manufacturer specifications.Coordinate with engineering teams for complex technical issues.Perform functional tests after repairs to verify serviceability.Engine & Component MaintenanceInspect aircraft engines for wear, leaks, corrosion, and damage.Perform engine servicing, oil changes, filter replacement, and component inspections.Maintain propellers, Auxiliary Power Units (APU), and fuel systems.Monitor engine performance and recommend corrective actions.Avionics & Electrical SystemsInspect communication and navigation systems.Maintain radar, autopilot, cockpit instrumentation, and electrical wiring.Test aircraft electronic systems for operational reliability.Ensure compliance with avionics maintenance procedures.Documentation & ComplianceComplete maintenance logs, inspection reports, and defect records.Maintain aircraft technical documentation accurately.Ensure compliance with aviation regulatory authorities.Certify aircraft for return to service after maintenance (where appropriately licensed).Follow company maintenance policies and quality assurance procedures.Safety & Quality AssuranceFollow all aviation safety regulations and standard operating procedures.Maintain clean and organized work areas.Ensure proper use of Personal Protective Equipment (PPE).Report safety hazards and technical discrepancies immediately.Participate in safety audits and quality inspections.Team CoordinationWork closely with pilots, technicians, quality inspectors, and operations staff.Coordinate maintenance schedules with flight operations.Assist junior technicians with technical guidance and training.Participate in emergency aircraft recovery and AOG (Aircraft on Ground) support.Required QualificationsDiploma or Bachelor's Degree in Aircraft Maintenance Engineering, Aeronautical Engineering, Mechanical Engineering, or Aerospace Engineering.DGCA-approved AME qualification or equivalent aviation authority certification is preferred.Valid Aircraft Maintenance Engineer License (where applicable).Type rating on specific aircraft is an advantage.Relevant experience in aircraft maintenance is preferred.Required SkillsStrong knowledge of aircraft systems and maintenance procedures.Excellent troubleshooting and fault diagnosis skills.Knowledge of aviation regulations and airworthiness standards.Ability to interpret aircraft maintenance manuals and engineering drawings.Strong analytical and problem-solving abilities.Excellent attention to detail.Good communication and teamwork skills.Ability to work under pressure and meet strict deadlines.Computer proficiency in maintenance management software.Good technical documentation skills.Technical KnowledgeAircraft StructuresGas Turbine EnginesHydraulic SystemsPneumatic SystemsElectrical SystemsAvionics SystemsFlight Control SystemsLanding Gear SystemsFuel SystemsAircraft DocumentationMaintenance PlanningAircraft Safety StandardsPreferred CertificationsDGCA Aircraft Maintenance Engineer LicenseEASA Part-66 License (preferred internationally)ICAO-compliant aviation trainingHuman Factors TrainingSafety Management System (SMS) TrainingFuel Tank Safety TrainingEWIS (Electrical Wiring Interconnection System) TrainingAircraft Type Rating CertificationWorking ConditionsAirport hangars, maintenance bases, and line maintenance stations.Rotational shifts including nights, weekends, and public holidays.Outdoor work in varying weather conditions.Physically demanding work involving standing, climbing, bending, and lifting equipment.Exposure to aircraft noise, fuels, lubricants, and hydraulic fluids while following strict safety procedures.Salary Range (India)Fresher: 3.5 - 6 LPA2-5 Years: 6 - 10 LPA5-10 Years: 10 - 18 LPALicensed/Type-Rated AME: 15 - 30+ LPA (depending on airline, aircraft type, and experience)

1. Job PurposeResponsible for ensuring maximum availability and reliability of plant machinery, furnaces, electrical systems, utilities and other production equipment through preventive, predictive and breakdown maintenance.2. Key ResponsibilitiesMechanical Maintenance Maintenance of aluminium melting furnaces, holding furnaces and associated equipment. Maintenance of pumps, motors, gearboxes, conveyors, compressors, hydraulic and pneumatic systems. Handle breakdown maintenance and ensure minimum production downtime. Conduct preventive maintenance as per defined schedules. Identify recurring failures and implement permanent corrective actions. Maintain critical spare parts and recommend spares for procurement.Electrical Maintenance Maintenance of HT/LT electrical systems, MCC/PCC panels, control panels and distribution systems. Maintenance of motors, starters, VFDs, sensors and electrical control systems. Ensure proper functioning of DG sets, transformers and power distribution systems. Troubleshoot electrical breakdowns safely and quickly. Ensure electrical safety, earthing and compliance with applicable standards.Furnace & Process Equipment Ensure reliable operation of melting and alloy production equipment. Monitor furnace-related mechanical/electrical equipment. Coordinate with production during furnace breakdowns and shutdowns. Monitor critical parameters and identify early signs of equipment failure.Preventive Maintenance Prepare and execute daily, weekly, monthly and annual PM schedules. Maintain equipment history and breakdown records. Track MTBF, MTTR and machine availability. Analyse repeated breakdowns and implement RCA/CAPA.Utilities Maintenance of compressors, cooling-water systems, pumps, ventilation systems and other plant utilities. Monitor utility equipment performance and energy consumption.Safety & Compliance Follow LOTO and all plant safety procedures. Ensure maintenance work is carried out with proper PPE and safety permits. Ensure electrical and mechanical equipment are maintained in safe operating condition. Support statutory inspections and safety audits.3. QualificationEssential: Diploma / B.E. / B.Tech in Mechanical or Electrical Engineering. ITI with strong industrial maintenance experience may also be considered for Technician/Senior Technician positions.4. Required Skills Strong breakdown troubleshooting capability. Knowledge of preventive and predictive maintenance. Knowledge of PLC/VFD and industrial electrical systems. Knowledge of hydraulic and pneumatic systems. Ability to read electrical/mechanical drawings. Good knowledge of MS Excel and maintenance documentation. Strong team-handling and vendor-management skills. Ability to work in shifts and during emergency breakdowns.5. Preferred Candidate ProfilePriority should be given to candidates from:1. Aluminium alloy / aluminium recycling plants2. Foundry / melting plants3. Die-casting industries4. Automotive component manufacturing5. Steel / non-ferrous metal plants6. Heavy engineering manufacturing

We are seeking a Quality Assurance Engineer to ensure our products meet the highest standards of quality. Located in Viman Nagar, Pune, this full-time position is suitable for male candidates with 0 to 5 years of experience and an educational background from ITI.nnKey responsibilities include:nn1. Developing Test Plans: You will create comprehensive test plans to define the scope and objectives of each testing phase, ensuring clarity in testing expectations.nn2. Executing Tests: Conduct various types of manual and automated tests to identify defects and validate the functionality of our software products.nn3. Documenting Results: You will document testing results clearly to track defects and facilitate effective communication with the development team.nn4. Collaborating with Development Team: Work closely with developers to understand product requirements and provide feedback on quality and performance.nn5. Continuous Improvement: Participate in team meetings to recommend improvements in testing processes and strategies, contributing to enhanced product quality.nnTo succeed in this role, candidates should have strong analytical skills to identify problems effectively. Attention to detail is crucial to ensure that every aspect of the product is tested thoroughly. Strong communication skills will help in documenting findings and collaborating with team members. A foundational knowledge of testing methodologies and software development processes will be beneficial. This role offers an opportunity to grow your career in quality assurance within a dynamic team environment.

An Aircraft Maintenance Engineer is responsible for inspecting, maintaining, repairing, and ensuring the airworthiness of aircraft systems and components. They ensure that aircraft meet safety regulations and are safe for flight operations by following aviation authority standards.Key ResponsibilitiesInspect aircraft systems, engines, and components before and after flights.Perform routine maintenance, repairs, and overhauls on aircraft.Diagnose mechanical and electrical faults in aircraft systems.Replace or repair defective aircraft parts and components.Ensure compliance with aviation safety standards and regulations.Maintain detailed maintenance records and technical documentation.Conduct troubleshooting on aircraft systems such as engines, landing gear, hydraulics, and avionics.Coordinate with pilots and ground crew regarding aircraft condition and maintenance issues.Test aircraft systems to ensure proper functioning after maintenance.Ensure all work is completed according to aviation authority guidelines.Required SkillsStrong knowledge of aircraft systems and engineering principlesMechanical and technical troubleshooting skillsAttention to detail and safety awarenessProblem-solving abilityAbility to work under pressure and in shiftsGood communication and teamwork skillsEducational QualificationDiploma or Degree in Aircraft Maintenance Engineering (AME) or Aeronautical Engineering.Certification or license from aviation authority (such as DGCA in India).ExperienceFreshers can work as Technicians or Trainees.Experienced engineers may work as Licensed Aircraft Maintenance Engineers.Work EnvironmentAirports and aircraft hangarsAviation maintenance organizationsAirlines and aircraft manufacturing companies

We are looking for an experienced Electrical Engineer to join our team in Pune, India. The successful candidate will address technical challenges, provide troubleshooting solutions, and manage project-related documentation.Key responsibilities include:- Addressing ongoing technical challenges: Troubleshoot issues effectively to ensure smooth project execution.- Preparing and obtaining approval for Technical Queries (TQ): Use SAPE to formalize and submit queries for project clarity and direction.- Preparing material take-out lists: Compile comprehensive lists of manpower and materials required to meet project specifications.The ideal candidate should have a degree in Electrical Engineering and 5 to 8 years of relevant work experience. Strong analytical and problem-solving skills are essential for addressing technical issues efficiently. Proficiency in using SAPE for document management and technical queries is required. The ability to work collaboratively with team members and communicate effectively is important.This is a full-time position, requiring office attendance in Pune. The role might involve fieldwork, though specifics of travel are not detailed. Candidates must be prepared to handle physical tasks as per project needs. The working schedule consists of standard office hours with weekends typically off.Join us to contribute to innovative electrical engineering projects while advancing your professional career.

We are looking for a Maintenance Engineer to join our team in Viman Nagar, Pune. The ideal candidate will have 1 to 5 years of experience and hold a diploma in a relevant field. This role requires a male candidate and will involve working in the office.Key Responsibilities:1. Equipment Maintenance: Regularly inspect and maintain machinery and equipment to ensure they are operating efficiently. This will involve troubleshooting and repairing any faults.2. Preventive Maintenance: Implement a preventive maintenance schedule to minimize downtime. You will identify potential issues before they become serious problems, ensuring smooth operation.3. Documentation: Maintain accurate records of maintenance activities and repairs. This will help track maintenance history and assist in future planning.4. Collaboration: Work closely with other engineers and team members to enhance maintenance processes and share best practices. Effective communication is key to ensuring tasks are completed on time.5. Compliance: Ensure all maintenance work complies with safety standards and regulations. This is crucial for maintaining a safe workplace.Required Skills and Expectations:Candidates should have a solid understanding of mechanical and electrical systems. Strong problem-solving skills are necessary to diagnose and fix issues quickly. Good communication skills are important for teamwork. Candidates should be detail-oriented and organized, capable of managing multiple tasks in a fast-paced environment. A proactive attitude toward learning and adapting to new technologies is also expected.

We are looking for an Electrical Engineer to join our team in Viman Nagar, Pune. The ideal candidate will have 1 to 5 years of experience and a diploma in electrical engineering. This role is primarily office-based.Key Responsibilities:- Design and Development: You will create electrical systems and components, ensuring they meet industry standards and project specifications. This involves using design software and tools for optimal results.- Testing and Troubleshooting: You will test electrical equipment and systems to ensure they function correctly. Identifying and fixing issues will be a crucial part of your work.- Collaboration with Teams: You will work closely with other engineers and project managers to ensure that projects are completed on time and meet client requirements. Good communication skills will help you share ideas and solutions effectively.- Project Documentation: You will be responsible for maintaining clear and detailed documentation of your designs and testing processes. This helps ensure transparency and future reference for ongoing work.Required Skills and Expectations:The ideal candidate should possess strong technical knowledge of electrical systems and be proficient in using related software tools. You should be detail-oriented with problem-solving skills and the ability to work independently as well as in a team. Strong communication skills and a proactive attitude are essential for success in this role. As this position is office-based, a commitment to working on-site is required.

RoleJob descriptionWe are looking for an Agentic AI Architect to design and deliver production grade agentic systems on AWS. This role owns the full lifecycle from architecture and design to hands-on implementation bridging the gap between highlevel system design and working code.Design multiagent architectures planning tool use memory orchestration real business use casesArchitect and deploy agentic workflows natively on AWS Bedrock Lambda Step Functions SageMaker ECS/EKSWrite production quality Python code While architecting this is a hands-on builder/user roleDefine agent-to-agent communication tool/function calling patterns and orchestration frameworks LangGraph CrewAI Bedrock Agents or customBuild RAG pipelines and integrate vector stores OpenSearch Pinecone etc into agent workflowsEstablish guardrails evaluation frameworks and observability for agentic systems in productionOptimize for latency cost and reliability across distributed agent workflows on AWSCollaborate closely with Python engineers guiding them on implementation while co-building core agent componentsPrototype rapidly iterate based on evals and take solutions from POC to scaled deploymentStay current with the agentic AI ecosystem and bring emerging patterns into the architectureSkillsMandatory Skills: AI/GenAI Research

Key ResponsibilitiesAdminister and support AWSbased data platforms across development test staging and production environmentsManage services such as Amazon S3 Redshift RDSAurora Glue EMR Athena Lake Formation Kinesis Lambda DMS Step Functions and CloudWatchProvision and configure cloud resources using infrastructureascode tools such as Terraform AWS CloudFormation or AWS CDKImplement identity and access controls using IAM roles policies permission boundaries AWS Organizations and service control policiesMonitor platform health capacity job execution data pipelines storage and query performance proactively identify and resolve issuesPerform incident problem change release and servicerequest management in accordance with defined SLAs and ITIL practicesOptimize Redshift clusters SparkEMR workloads storage tiers data transfer and compute consumption for performance and costImplement backup recovery highavailability businesscontinuity and disasterrecovery controls conduct periodic restoration and failover testsSecure data using encryption key management private networking secrets management logging vulnerability remediation and leastprivilege accessEnable data governance through cataloging lineage classification access auditing retention and lifecyclemanagement controlsBuild operational automation using Python Shell scripting AWS CLI SDKs and CICD pipelinesMaintain platform standards runbooks architecture diagrams configuration records SOPs troubleshooting guides and audit evidencePartner with data engineers architects security teams application teams FinOps and business stakeholders on onboarding migrations upgrades and capacity planningProvide technical leadership mentor junior administrators coordinate vendor support and drive rootcause analysis and continuous improvementRequired Technical SkillsStrong handson administration experience with AWS data analytics compute storage networking security and monitoring servicesDeep understanding of data lake data warehouse lakehouse batchprocessing and streaming architecturesExperience administering Amazon Redshift including workload management query tuning distribution and sort strategies scaling snapshots and securityExperience with AWS Glue Data Catalog crawlers jobs workflows and Lake Formation permissionsWorking knowledge of Apache Spark and Amazon EMR administration troubleshooting scaling and performance tuningStrong knowledge of Amazon S3 design bucket policies lifecycle rules versioning replication encryption and access controlsProficiency in IAM KMS Secrets Manager VPC security groups private endpoints CloudTrail CloudWatch AWS Config and GuardDutyExperience with Terraform or CloudFormation and CICD tools such as AWS CodePipeline Jenkins GitHub Actions Azure DevOps or GitLab CICDProficiency in Python and Shell scripting for administration monitoring deployment and remediation automationStrong SQL skills and familiarity with relational databases data modeling ETLELT patterns and data integrationKnowledge of observability log analytics ing backup disaster recovery patching and productionsupport practicesUnderstanding of cloud costmanagement practices tagging standards budgets usage analysis and rightsizingQualificationsBachelors degree in Computer Science Information Technology Engineering or a related discipline7 years of overall experience in cloud infrastructure data platform administration database administration or data engineering operationsAt least 4 years of handson experience supporting AWS environments including production data and analytics workloadsDemonstrated experience operating highly available secure and scalable enterprise platformsStrong troubleshooting rootcause analysis documentation communication and stakeholdermanagement skillsAbility to participate in oncall support and planned maintenance activities when requiredSkillsMandatory Skills : AWS EC2, AWS Glue, AWS Lambda, AWS S3Good to Have Skills : AWS Well Architected ToolsRemote

We are seeking an Aircraft Maintenance Engineer to join our team in Pune. This role is suitable for candidates with 0 to 6 years of experience and a minimum education level of 12th pass. As an Aircraft Maintenance Engineer, you will play a crucial role in ensuring the safety and efficiency of aircraft.Key Responsibilities:- Conduct Inspections: Regularly inspect aircraft components and systems to identify any wear, damage, or required maintenance. This is vital for ensuring all aircraft meet safety regulations.- Perform Maintenance and Repairs: Execute scheduled and unscheduled maintenance tasks on aircraft according to manufacturer specifications, ensuring airworthiness and reliability.- Troubleshoot Issues: Analyze and diagnose mechanical and electrical issues in aircraft systems. Quick and accurate problem-solving is essential to minimize downtime.- Maintain Records: Keep detailed maintenance logs and reports of all inspections and repairs performed. Accurate documentation is necessary for compliance and safety audits.- Collaborate with Teams: Work closely with other engineers and technicians to coordinate maintenance activities and ensure effective communication regarding ongoing projects.Required Skills and Expectations:Candidates should have strong attention to detail and a commitment to safety. Good problem-solving skills are essential to address technical issues effectively. Being a team player is crucial, as you will work alongside other professionals in a fast-paced environment. A basic understanding of aircraft systems and proficiency in using maintenance tools and software will be advantageous. Strong communication skills are also important for collaborating with team members and reporting findings.

A Sales & Application Engineer is someone who can help organization build a better brand and maximize profits. These professionals generate new sales leads, negotiate client pricing, and forecast sales revenue. It requires experience in market research, strategy, and building relationships. Responsibilities - Manage and retain relationships with existing clients Identify and generate new business leads, plan and implement new marketing initiatives Having an in-depth knowledge of business products, value proposition, and using it to develop growth strategy focused both on financial gain and customer satisfaction Research and evaluate industry trends by attending conferences, meetings, and industry events, and discuss business strategy with stakeholders Resolve internal priorities and report on successes as well as areas needing improvements Pursuing leads and moving them through the sales cycle. Developing quotes and proposals for prospective clients. Setting goals for the business development team and developing strategies to meet those goals. Require travelling internally as well as adjoining 3-4 districts must.Requirements - Experience in tooling industry is must. Experience in business administration, sales, marketing or related field Proven track record of success in B2B sales and negotiation Strong communication skills and good computer literacy. Knowledge of latest market trends, business tools, etc Excellent verbal and written communication skills Ability to multi task and manage multiple projects simultaneously Self-motivated individual Proven ability to negotiate

Ensures products meet quality standards and customer requirements by designing inspection systems, analyzing production data, and driving improvements. Quality System Development.Inspection & Testing .Supplier Quality Management.Documentation & Reporting.

Develop and implement quality assurance and quality control procedures for construction projects. Inspect materials, workmanship, and completed work to ensure compliance with specifications and standards. Prepare and maintain QA/QC documentation, reports, and checklists. Coordinate with site engineers, project managers, and consultants on quality-related issues . Conduct site audits and internal inspections. Ensure compliance with safety and quality regulations. Identify non-conformance issues and implement corrective actions. Monitor testing of materials (concrete, steel, etc.) and maintain records. Review drawings and specifications for quality requirements. Assist in client inspections and third-party auditsRequirements: Bachelors degree in Civil Engineering or related field 1-5 years of experience in QA/QC in construction/infrastructure projectsKnowledge of quality standards, IS codes, and testing procedures Strong documentation and reporting skills Familiarity with MS Excel and quality management systemsGood communication and problem-solving skills.

Job Profile & Key Responsibilities:-A Service Engineer at Calitron Calibration Laboratory (OPC) Pvt. Ltd. is responsible for the installation, maintenance, testing, and field or lab calibration of electrical, electronics, mechanical, thermal, and flow instrumentation. On-Site & In-Lab Service: Handle both internal lab duties in Bhosari, Pune, and field-based service visits to customer sites for equipment inspection and maintenance (travel within city/country as required). Installation & Troubleshooting: Install, diagnose, and troubleshoot industrial test and measurement equipment. Documentation & Compliance: Maintain calibration certificates, service reports, logbooks, and trace measurement data accurately to ensure regulatory compliance. Customer Support: Coordinate with clients for equipment servicing, technical queries, and turnaround support.

HIRING!!!!! INDUSTRIAL SITE ENGINEER -Location: Pune, Maharashtra Industrial Constructions Activity, PB building, structural Erection, Infrastructure Development. Supervise and monitor daily construction activities at the project site. Ensure execution of work as per approved architectural, structural, and working drawings. Coordinate with architects, structural consultants, contractors, vendors, and site workers. Check dimensions, levels, materials, and workmanship as per drawings and specifications. Monitor site progress and ensure work is completed within the planned schedule. Identify site issues and coordinate with the concerned team for timely resolution. Prepare and maintain daily site reports, progress reports, measurement records, and site documentation. Verify quantities and measurements of completed work. Coordinate material requirements and ensure timely availability at site. Monitor material quality and ensure proper storage and usage. Conduct regular site inspections and report deviations or quality issues. Ensure proper implementation of safety practices at the construction site. Review drawings and communicate any discrepancies or technical requirements to the concerned senior. Coordinate with contractors regarding work sequence, manpower, materials, and timelines. Attend site meetings and provide updates on project progress and challenges. Maintain proper records of site instructions, approvals, revisions, and executed work. Ensure that site work follows approved specifications and applicable building standards. Required Skills Good knowledge of construction methods and site execution. Ability to read and interpret architectural and structural drawings. Good understanding of RCC, masonry, plastering, flooring, waterproofing, finishing, and other construction activities. Knowledge of quantity measurement and basic estimation. Good coordination and communication skills. Ability to identify site-level technical issues and provide practical solutions. knowledge of AutoCAD is preferred. Good knowledge of MS Excel and MS Office. Strong site supervision and problem-solving abilities. Ability to manage multiple site activities and meet deadlines.Educational Qualification Diploma / B.E. / B.Tech in Civil Engineering or equivalent qualification.Must have 1-6 yrs. Exp.Project Management: End-to-end execution of large-scale industrial projects (factories, warehouses, processing plants, logistics parks)PEB and Structural Expertise: Deep technical understanding of PEB design integration, fabrication supervision, heavy structural steel erection, and crane logistics (tandem lifting, load charts, safety protocols).Infrastructure Knowledge: Experience managing heavy civil works, internal roads, storm-water drainage networks, utility piping, boundary walls, and power distribution infrastructure. only interested candidate can share

Job For Site EngineerDepartment/Domain: Construction / Site EngineerExperience. 1 yrs to 4 yearsSalary - 22000 - 26000 (Monthly)Key Responsibilities:Supervising day-to-day site operations, construction activities, and structural works.Ensuring execution aligns with architectural drawings, structural plans, and quality standards.Coordinating with contractors, vendors, architects, and project managers on-site.Monitoring material consumption, quality control, and safety compliance.Check dimensions, levels, materials, and workmanship as per drawings and specifications.Prepare and maintain daily site reports, progress reports, measurement records, and site documentation.Ensure proper implementation of safety practices at the construction site. Review drawings and communicate any discrepancies or technical requirements to the concerned senior.Maintain proper records of site instructions, approvals, revisions, and executed work.Requirements:Degree / Diploma in Civil Engineering.Relevant site execution experience in residential/commercial/Industrial / Architectural projects / Real Estate Preferred.Strong technical, communication, and site supervision skills.