Supplier Quality Jobs

Key ResponsibilitiesFirst-Piece & Line Inspection: Conduct first-piece approval at the start of every shift or batch change to verify setup accuracy. Perform routine, scheduled hourly audits along the production line.Dimensional & Visual Checks: Measure parts against engineering drawings using hand-held precision inspection tools (e.g., Vernier calipers, micrometers, height gauges, thread plug/ring gauges, dial indicators).Incoming Material Inspection: Inspect incoming raw materials, fabricated components, or packaging supplies against purchase order specs and sampling plans (such as AQL standards).Defect Isolation & Red-Binning: Immediately halt production or segregate defective components into designated Red Bins (Non-Conforming Material areas) when defects exceed acceptable limits.Reporting & Log Maintenance: Maintain clean, readable daily inspection reports, rejection logs, and shift-wise quality summaries.Final Quality Audit: Run final visual checks and cosmetic inspection on finished goods before boxing, ensuring correct labeling and packaging compliance.

As a Supplier Quality Engineer, you will play a vital role in ensuring that the quality of materials and components from suppliers meets our company standards. You will collaborate with suppliers and internal teams to enhance processes and ensure high-quality products.**Key Responsibilities:**- **Supplier Evaluation:** Assess and select suppliers based on their quality performance, capabilities, and compliance with industry standards.- **Quality Audits:** Conduct regular audits at supplier locations to ensure adherence to quality standards and identify areas for improvement.- **Quality Control Plans:** Develop and implement quality control plans to ensure consistent quality of incoming materials.- **Root Cause Analysis:** Investigate quality issues that arise with supplier products and lead efforts to determine root causes and preventive measures.- **Collaboration with Suppliers:** Work closely with suppliers to provide quality feedback and guide them on improvement initiatives.- **Documentation:** Maintain accurate records of supplier quality performance, audit findings, and corrective actions taken.**Required Skills and Expectations:**Candidates should have a diploma in engineering or a related field, with 1-2 years of experience in quality engineering or supplier management. Strong analytical skills and attention to detail are essential for identifying issues and driving solutions. Effective communication skills are necessary for collaborating with suppliers and internal teams. A proactive approach to problem-solving and a commitment to maintaining high-quality standards will be critical in this role. Familiarity with quality tools and methodologies, such as Six Sigma or ISO standards, is a plus. This position is office-based in Ambattur Industrial Estate and is open to male candidates only.

Designation :- QA/QC ManagerQualification: BE/B.Tech In Mechanical Engineering/NDT Level 2 Experience :- 20 Years Above Salary:- As Per InterviewGender:- MaleKey Responsibilities:- i) Ensure product quality & process complianceii) Implement & maintain Quality Management Systemiii) Vendor evaluation & developmentiv) NDT coordination & documentationv) Continuous improvement in quality systems and processesJob Location:- Umbergaon, Gujarat Industry:- Reputed Manufacturing Industry

We are looking for a Procurement Specialist to manage purchasing processes and supplier relationships effectively. The ideal candidate will have 3 to 5 years of relevant experience and a background in various educational fields such as B.A, B.Arch, B.C.A, B.B.A, B.Com, B.Sc, B.E, or equivalent professional qualifications.**Key Responsibilities:**- **Vendor Management:** Identify, evaluate, and negotiate with suppliers to secure the best prices and quality standards.- **Purchase Orders:** Create, review, and manage purchase orders, ensuring accuracy and timely processing of transactions.- **Inventory Control:** Monitor stock levels and coordinate with suppliers to ensure timely deliveries and prevent shortages.- **Cost Analysis:** Conduct market research to evaluate supply options and analyze pricing trends to make informed purchasing decisions.- **Compliance Monitoring:** Ensure that all procurement activities comply with company policies and procedures, as well as relevant legal requirements.- **Reporting:** Prepare regular reports on procurement activities, expenditures, and supplier performance to inform management decisions.**Required Skills and Expectations:**Candidates must possess strong negotiation skills and have the ability to build effective relationships with suppliers. Good analytical skills are essential for evaluating purchasing data and market trends. Proficiency in procurement software and MS Office applications is required. The role demands strong communication skills, both written and verbal, to interact with stakeholders effectively. Attention to detail and organizational skills are crucial for maintaining accurate records and managing multiple tasks simultaneously. Flexibility to adapt to changing market conditions and procurement needs is also expected.

Date posted: May 28, 2026Pay: 20,000.00 - 30,000.00 per monthJob description:WE ARE HIRING - Line Quality EngineerLocation: Chinnavedampatti, CoimbatoreIndustry: Machine ShopQualification: Diploma / BE - Mechanical EngineeringExperience: 2 to 5 YearsSalary Range : 20,000 to 30,000Required Skills:Instrument handlingGD&T knowledgeDrawing readingBasic quality documentsCAPA basicsIn-process & final inspectionResponsibilities:Setting approvalIn-process inspectionFinal inspection & reportsSupplier quality inspectionRejection & rework monitoringFree Accommodation ProvidedBenefits:Food providedHealth insurancePaid sick timeProvident FundWork Location: In personPay:20000-30000 per month

Identify and evaluate potential vendors based on capability, quality, cost, and delivery performance.

*Accountable for preparation of Quality Assurance plan and monitoring & Inspection at inward of products to assure compliance to all products specifications.*Working principle on 7QC tools & problems solving technique basis*Dock audit, Poison cake test, Daily rejection monitoring, deviation tracker for Supplier Issue.*Material Testing plan for Third party for material confirmation*Parts inspection of new development projects and Alternate Supplier.*Monitoring 4M Change such as per Supplier change & Ensuring Parts coming from Approved Supplier*Verifying PDI and MTC Report as per Standards.*Clearing GRN as Per defined timeline from SAP.*Escalation and decision for Supplier Hold material and clearing from system and send back to supplier.*Supplier Issue Communication for non-confirming material.*Training to new joining about incoming inspection*Aware about Inspection procedure and Sampling plan and AQL for Lot Acceptance.*Layout Inspection as per Plan for child parts.

Iron & steel Company Department:- production & manufacturing Job role:- Quality inspector Qualification= graduate Experience :- 1 to 6 year Annual salary:- 1 to 2 lac + overtime Timing=9:30 to 7pmNo.of Vacancies: 5

GET 2026Trainee 1) To record the manpower available at site.2) To record the materials available at site.3) To raise indent/ PR( Purchase Requisition) for material required in coming days toavoid delays.4) To make estimate of quantites of material required at site.5) To maintain all records of work executed and checked such as checklist, pour card,post concrete6) inspections, sub-contractor & material bills, debit notes etc.7) To travel between sites as required for the company's need to complete projecteffectively.9) To collaborate with sub-contractors to ensure timely project completion.10) To identify potential risks & implementing preventive measures to minimize projectdelays at site.11) To establish and maintain effective working relationships with district employees,sub-contractors, labors, vendors and all others contacted during the course of workusing principle of excellent customer service.12) To be regular & reliable performance & attendance is must required.13) To record measurement of work done by sub contractor.15) To ensure prompt action on complaints received from client.16) To have physical verification of stores/T&P every 3 months.

Post: Supplier Quality Engineer / Senior EngineerJob Location: FaridabadCompany: Aktive Technologies Pvt. Ltd.Support regulatory compliance related to ISO 13485, MDR, and customer-specific requirements.Required Candidate profileEnsuring all supplied materials, components, and services meet Aktiv Technologies quality, compliance, and regulatory standards.Experience with medical devices, automotive, aerospace industry.

Dear Candidate,Greetings of the Day !!!We are looking for Engineer SQA ( Casting+Forging) @ RajkotDesignation : Engineer SQA ( Casting+Forging) Qualification: BE MechanicalExperience : 3+ years of experience in supplier quality.CTC:Best in industryLocation : Rajkot (Gujarat)Key Responsibilities: Conduct supplier audits and process capability assessments for casting, forging, fabrication vendors. Review and validate technical drawings, material specifications, and manufacturing feasibility. Implement and monitor APQP, PPAP, FMEA, SPC, and MSA for supplier processes. Lead root cause analysis and corrective actions (CAPA/8D) for supplier-related quality issues. Collaborate with cross-functional teams (Design, Procurement, Manufacturing) to ensure quality alignment. Maintain supplier documentation for compliance and traceability (ISO/IATF Standards). Support supplier onboarding, development, and performance improvement programs. Provide technical support during product development and production ramp-up phases. Work with ERP systems (e.g., SAP) for quality tracking and reporting. Strong understanding of casting ,forging processes. Proficiency in quality tools: APQP, PPAP, FMEA, MSA, SPC. Excellent communication, negotiation, and problem-solving skills.Interested candidates might be shared resumes on info.rojgariplacements@gmail.com or Whatsapp on9723550030.Regards,Ms.Swara PatelHead Talent Acquisition9723550030Rojgari Placements Pvt.Ltd.

Congratulations! Your CV has been shortlisted for the position of QA/QC Engineer.Job Title: QA EngineerJob Locations: Singapore, New Zealand, Canada, Dubai, Oman, Saudi Arabia, UAEContract Duration: 2 Years (Renewable)Salary Range: 80,000 to 6,00,000 INR per month (Depending on experience and location)Benefits: Free Food & AccommodationEducation Qualification: Bachelors Degree or Diploma in Engineering (Mechanical, Civil, Electrical, or related field)Eligibility: Candidates with a valid passport are eligible to applyKey Responsibilities:Quality Monitoring: Oversee and ensure that materials, workmanship, and project execution meet specified quality standards and codes.Documentation & Reporting: Maintain quality records, test reports, inspection logs, and submit regular quality assurance documentation.Conduct Inspections: Perform internal audits and inspections at various stages of project execution to verify quality compliance.Non-Conformance Handling: Identify and document non-conformances, investigate root causes, and coordinate with relevant teams to implement corrective actions.Liaise with Clients & Contractors: Communicate quality-related issues and updates with clients, consultants, and subcontractors.Additional Information:Free food and accommodation provided for the full contract period.Must be willing to relocate to any of the specified countries.Great opportunity for international career growth in QA/QC.How to Apply:Interested candidates with a valid passport can contact the HR Team:Muskan Ahmed+91 8981753516

Designation:- Quality Assurance EngineerQualification:- BSc (Maths /Physics/Botany) or Diploma/Degree in Mechanical EngineeringExperience:- 2 Years To 5 Years Salary:-18,000 To 23,000Gender:- MaleJob Location:- Palghar,Maharashtra Industry:- Manufacturing Company

Key Responsibilities1. Test Planning & DesignAnalyze requirements and create detailed test plans and test casesDefine testing strategies, including manual and automated testingIdentify test scenarios and ensure full coverage2. Software TestingPerform functional, regression, integration, and system testingExecute manual and automated test casesValidate features against business and technical requirements3. Bug Tracking & ReportingIdentify, document, and track defects using bug tracking tools (e.g., JIRA, Bugzilla)Work with developers to reproduce issues and ensure timely resolutionRetest fixes and ensure defects are closed properly4. Automation TestingDevelop and maintain automated test scripts using tools like Selenium, Cypress, or PlaywrightIntegrate test automation into CI/CD pipelinesImprove test coverage and efficiency through automation5. CollaborationWork closely with developers, product managers, and stakeholdersParticipate in sprint planning, stand-ups, and retrospectivesProvide feedback on usability and improvements6. Performance & Security TestingConduct performance testing using tools like JMeter or LoadRunnerIdentify bottlenecks and performance issuesEnsure basic security and compliance standards are metRequired Skills & QualificationsEducationBachelor