Quality Analysis Jobs

Need to handle Chakan plant for Shot Blasting and Painting process.1) Need to possess following knowledge related to Painting Process Aware of surface preparation and painting related international standards like ASTM, NACE, ISO and SSPC etc. Familiar with Aramco/ ADNOC painting specifications is preferred. Aware of requirements for surface preparation by blasting for CS, SS and Al and tests for the same. Aware of climatic conditions requirements during blasting, surface preparation and painting. Aware of air quality requirements Aware of primer for Al and two main types of primers for carbon steel and their pros and cons. Aware the function of MIOs. Aware of various types of primers, paints and their pros and cons. Aware of paint preparation and application requirements. Aware of how paint coverage is achieved on sharp corners and edges. Aware of post painting tests. Aware of how the gloss of paint film can be improved Preparation of painting quality records at different stages from surface preparation to post painting. Prepare SOPs, WI, QAP and ITP for complete blasting and painting process. Propose painting scheme as per customers requirements of corrosion protection. Monitor surface preparation, painting process. Aware of how to do paint patch work (at paint damage portion) which will aesthetically also looks good. Monitoring inspection of all tests from surface preparation to post painting. Aware of air less painting. Analysis of painting rejection and rework and CAPA for the same. Monitoring of shelf life of primer and paints. Qualification of new paint cycles. Train painters for good quality painting and work efficiency. Handling of TPI. Exposure to 7 tank pre treatment, powder coating, fire proof coating is preferred. Development and auditing of Painting and Powder coating vendors. Carry out kaizen projects for cost reduction and better work efficiency. Monitor 5S and housekeeping of paint shop Prepare QMS and EHS documents, records for internal, external audit.2) Need to possess following knowledge related to Shot Blasting Processa) Equipment related Abrasive recovery system/ Dust collection system/ Blast cabinet and Work handling systemb) Operational parameters relatedMedia velocity/ Media selection (size, hardness, density)/ Impact angle/ Flow rate/ Air Qualityc) Surface cleanliness standardSA2.5/ SA3.0d) Health, Safety and Environment relatedPPEs/ Regulatory compliances/ Pre-processing requirements3) Manage Shot Blasting and Paint Shop by planning the workload on daily basis. Have handled the workers.4) Chakan plant has spring cartridge assembly facility, which involves, robot welding set up.The candidate need to oversee spring cartridge assembly also.5) Good Verbal and written communication skill.Education ------ Dip Mech/ BE Mech/ Dip in Paint Technology and NACE Level 2 qualification for Painting Process is must.Experience ----- Around 9 years.CTC -------------- To suit qualifications, experience.

As a Production Quality Engineer, you will play a crucial role in ensuring that products meet high-quality standards throughout the manufacturing process. Your attention to detail and problem-solving skills will help maintain product integrity and safety.**Key Responsibilities:**- **Quality Assurance:** Oversee the quality of production processes to ensure that all products meet specified standards and regulations.- **Root Cause Analysis:** Identify and analyze defects or quality issues in products and processes, determining the underlying causes to implement corrective actions.- **Process Improvement:** Collaborate with production teams to develop and implement strategies that enhance production efficiency and product quality.- **Documentation and Reporting:** Maintain detailed records of quality inspections and audits, preparing reports for management that highlight findings and recommendations.- **Training and Support:** Provide guidance and training to production staff on quality standards and procedures, fostering a culture of quality awareness.**Required Skills and Expectations:**Candidates should possess a Bachelors degree in Engineering and have 3 to 8 years of experience in a quality engineering role, preferably in production. Strong analytical skills are essential for problem solving, along with a thorough understanding of quality standards and testing methodologies. Candidates must be able to work collaboratively in a team-oriented environment and communicate effectively with colleagues at all levels. Proficiency in quality tools and software will be an advantage. The role is office-based, so the ability to work onsite in Jaipur is required.

1. Educational Background (Mandatory):A bachelor's degree in quality management, industrial engineering, ELECTRICAL engineering, or in a related field.2. Certifications:To enhance qualifications and job prospects in quality assurance, following certificationsare advantageous:Certified Quality Engineer (CQE): offered by the American Society for Quality (ASQ)Certified Quality Auditor (CQA): suitable in auditing quality systems and processes.Certified Six Sigma Green Belt or Black Belt: for quality control and process optimization.ISO 9001 Lead AuditorLean Six Sigma CertificationExperience(Manufacturing background 23 yrs):Five to Ten years practical experience in quality control, quality assurance, or related roles within a manufacturing environment.Prefer to the experience which is related to IECEx / ATEX factory audit.Knowledge of QA/QC Standards (Mandatory):Familiarity with relevant quality assurance standards and methodologies, including ISO/IEC80079-34:2018, IEC60079, ISO 9001.Familiarity with Quality Management Software systems for managing and tracking quality-related data and processes.5. Soft Skills:Communication skills to convey quality requirements and work with cross-functional teams.Problem-solving to identify and address quality issues is crucial.Attention to details, ensuring product specifications are met requires a keen eye for detail.Analytical skills analysing data and trends to make quality improvements.Computer Skills:Proficiency with relevant software tools and technologies used in quality assurance, such as testing automation tools and quality management software.General Terms and Conditions,Working Country : Dubai, U.A.EContract Period : 3 years and renewableProbation Period : 6 monthsWorking hours : 10 hours per dayFood and Accommodation has to be arranged by the Employee with the allowance to be provided by the Employer.English communicationExperience : 5 yrs

ONLY INDIAN CANDIDATES ONLYPlan, supervise, and manage civil construction projects.Prepare and review engineering drawings, plans, and specifications.Monitor construction work to ensure compliance with approved drawings and standards.Coordinate with contractors, subcontractors, consultants, and site teams.Check quantities, materials, measurements, and work progress.Conduct site inspections and identify construction issues.Ensure projects meet required quality and safety standards.Prepare daily, weekly, and monthly progress reports.Monitor project schedules and assist in completing work on time.Supervise concrete, structural, masonry, excavation, and finishing works.Coordinate material requirements and site activities.Ensure proper implementation of health, safety, and environmental procedures.Resolve technical problems and provide appropriate engineering solutions..

K9HR SOlUTIONS, Bansi Vanpariya (HR Manager - Mo. No. 90999 71251 Email ID : hr028. k9hrs@gmail.com) is looking for Quality Control (QC) professional inspects and tests products to ensure they meet quality standards, identifies defects, maintains quality records, and works with production teams to improve product quality.

Casting & Dimensional inspectionDefect identificationDrawing interpretationMeasuring instrumentsVisual inspectionHardness testingQuality documentationRoot cause analysisProduction coordination

We are seeking an experienced Vendor Development Engineer to identify, develop, and manage vendors for precision machined components. The ideal candidate should have strong technical knowledge of CNC/VMC machining, supplier development, cost optimization, and quality management to ensure timely delivery of high-quality components.Key ResponsibilitiesIdentify, evaluate, and onboard new vendors for machining and precision components.Develop and maintain long-term relationships with suppliers.Source cost-effective vendors while ensuring quality standards.Conduct technical evaluations of vendors based on manufacturing capabilities.Review technical drawings (2D & 3D) and communicate technical requirements to suppliers.Negotiate pricing, payment terms, and delivery schedules.Monitor supplier quality, delivery performance, and continuous improvement activities.Coordinate with Purchase, Production, Quality, and Planning departments.Conduct supplier audits and performance evaluations.Resolve supplier-related quality and delivery issues.Maintain vendor database and documentation.Prepare reports related to vendor performance, cost savings, and sourcing activities.Ensure compliance with company quality and procurement standards

We are seeking a motivated and dedicated female Civil Engineer to join our team in Bangalore. This is a full-time position suitable for fresh graduates looking to start their career in civil engineering. The role involves working on a variety of projects, ensuring that they are completed safely, efficiently, and on time.**Key Responsibilities:**- **Project Design:** Assist in designing various civil projects, which includes creating plans and specifications that meet required standards and regulations.- **Site Inspection:** Conduct regular inspections of construction sites to ensure compliance with design specifications and safety guidelines.- **Collaboration:** Work closely with architects, contractors, and other engineers to ensure smooth project execution and resolve any technical issues that arise.- **Documentation:** Prepare and maintain accurate project documentation, including reports, plans, and records necessary for project planning and execution.- **Quality Control:** Monitor the quality of materials and workmanship on-site to ensure that the final output meets specified quality standards.**Required Skills and Expectations:**- **Educational Background:** A degree in Civil Engineering or related field is essential.- **Technical Skills:** Familiarity with engineering software such as AutoCAD or similar tools is preferred.- **Communication Skills:** Strong verbal and written communication abilities are necessary for effective collaboration with team members and stakeholders.- **Problem-Solving Skills:** Ability to identify potential issues and develop effective solutions quickly.- **Attention to Detail:** A keen eye for detail to ensure accuracy in designs and compliance with regulations is crucial. We welcome fresh talent ready to contribute and grow in a dynamic engineering environment.

Our client, a Bengaluru-based precision manufacturing company serving oil & gas, engineering and aeronautical sectors with high-integrity, safety-critical and bespoke machined components, is hiring a QC Inspector.Key Responsibilities:- Perform incoming inspection of materials, bought-out parts and imported cutting inserts.- Conduct dimensional and visual inspection using standard measuring instruments.- Read engineering drawings and verify tolerances, dimensions and specifications.- Support first-off, in-process and final inspection as required.- Maintain inspection records in ERP, QMS or approved documentation formats.- Coordinate with stores, purchase, production and quality teams on non-conforming items.- Ensure traceability, segregation and quality compliance.Required Technical Skills:- Incoming inspection experience.- Engineering drawing reading; GD&T knowledge preferred.- Mechanical inspection and dimensional measurement using vernier, micrometer, height gauge, bore gauge, dial gauge.- Ability to read dimensions from ERP/QMS systems, working in both metric and imperial units.Required Soft Skills: Detail orientation, documentation discipline, communication, escalation judgment, integrity under quality pressure.Education: Diploma/BE/BTech in Mechanical Engineering preferred (Automobile Engineering considered with relevant manufacturing inspection experience).Preferred Certifications: GD&T certification, internal auditor/ISO quality exposure, calibration or inspection training. CMM exposure is an advantage.Experience: 1-2 years, preferably from aerospace, oil & gas manufacturing, or precision machining backgrounds.Compensation: Rs. 18,000 - 50,000 per month based on experience and inspection depth. Full-time position based in Bengaluru.

Job Title: Assistant Management Representative (AMR)Department: Quality Management System (QMS)Reports To: Management Representative (MR)Job Purpose:The AMR supports the implementation, maintenance, and continuous improvement of the organization's Quality Management System (QMS). The role ensures compliance with applicable quality standards, manages documentation control, coordinates internal and external audits, and assists in achieving and maintaining certifications such as ISO 9001, API Q1, and other customer or regulatory requirements.Key Responsibilities:- Support establishment, implementation, maintenance and continual improvement of the QMS- Ensure compliance with applicable standards, customer requirements and company procedures- Maintain and control QMS documents, procedures, manuals and records- Prepare and maintain annual audit schedules; coordinate internal, supplier and certification audits- Track audit findings and ensure timely closure of corrective actions- Assist in organizing Management Review Meetings and prepare reports/KPI data- Support maintenance of ISO 9001, API Q1, API Monogram certifications- Monitor non-conformance reports (NCRs) and corrective/preventive actions- Conduct or coordinate QMS awareness and internal auditor trainingQualifications:- Bachelor's Degree in any discipline- Additional qualifications in Quality Management Systems preferred- Minimum 3 years of experience in QMS or Document Control- Experience in ISO 9001-certified organizations preferred- Internal Auditor certification desirableSkills Required:- Strong knowledge of QMS, ISO 9001, API Q1 standards- Document control and record management- Internal auditing and compliance management- Proficiency in MS Office (Word, Excel, PowerPoint)- Good communication and interpersonal skills- Analytical and problem-solving abilities

Expectations from candidate are as followsPosition is based at Rabale, Navi Mumbai plant.Shall be responsible for product quality of following products manufactured

Quality Planning, Quality Assurance (QA), and Quality Control (QC).Developing a Project Quality Plan (PQP) and Inspection and Test Plans (ITPs) tailored to the project's requirements. Establish KPIs, regulatory requirements, and document-control systems earlyhe process-oriented steps ensuring that quality standards are met during design, procurement, and construction. This involves internal audits, compliance with standards (e.g., ISO 9001), and managing vendor/supplier

oversees the end-to-end manufacturing of critical power infrastructure, such as towers, Transmission ,Fabrication , conductors, and hardware. They are responsible for setting strategic goals, directing workforce operations, ensuring rigorous quality standards, and maintaining optimal safety compliance across the manufacturing facility, Target Management, Workflow Coordination, Resource Allocation, Quality Assurance & Control, Cost & Inventory Management, Budgeting

The Assistant Manager Quality position in Jaipur is focused on ensuring high-quality standards in production and processes within the organization. Candidates must have between 3 to 9 years of experience and hold a B.E degree.**Key Responsibilities:**- **Quality Management System Implementation:** Oversee the establishment and maintenance of quality management systems to ensure compliance with industry standards.- **Process Audits:** Conduct regular audits of production processes to identify areas for improvement and ensure adherence to quality protocols.- **Team Leadership:** Lead and train quality control teams, providing guidance on best practices and fostering an environment of continuous improvement.- **Data Analysis:** Analyze quality data and metrics to identify trends and propose actionable solutions to enhance product quality.- **Customer Complaint Resolution:** Address and resolve customer complaints regarding product quality efficiently, ensuring satisfaction and maintaining client relationships.- **Reporting:** Prepare detailed reports on quality assessments and present findings to management, highlighting key issues and recommending improvements.**Required Skills and Expectations:**Candidates should possess strong analytical skills, enabling them to assess quality metrics and derive actionable insights. Attention to detail is critical, as the role demands rigorous monitoring of processes. Excellent communication skills are required for effective interaction with team members and stakeholders. A solid understanding of quality assurance tools and methodologies is essential. Candidates should be proactive, able to work independently, and demonstrate leadership abilities to mentor junior team members. Familiarity with industry regulations and standards enhances the candidate's suitability for this role.

We are looking for a motivated and detail-oriented female Civil Engineer to join our team in Hyderabad. This full-time position is perfect for fresh graduates who are eager to begin their career in civil engineering.Key Responsibilities:1. **Design and Planning**: Assist in creating designs and plans for construction projects, ensuring they meet safety and regulatory standards.2. **Site Inspections**: Conduct regular inspections at construction sites to monitor progress and ensure compliance with engineering standards.3. **Project Coordination**: Work closely with architects, contractors, and other engineers to ensure all aspects of the project are on track and communicate any issues promptly.4. **Documentation and Reporting**: Prepare and maintain project documentation, including reports and specifications, to ensure clear communication and proper record-keeping throughout the project lifecycle.5. **Problem Solving**: Identify potential issues in construction processes and develop solutions to overcome challenges, ensuring projects remain on schedule and within budget.Required Skills and Expectations:The ideal candidate should hold a degree in Civil Engineering and possess strong analytical and problem-solving skills. Good communication skills are essential for effective collaboration with the project team and stakeholders. A proactive attitude and attention to detail are crucial for success in this role. Familiarity with design software and engineering principles will be advantageous but is not mandatory. Adaptability and a willingness to learn will help contribute to our dynamic work environment.

We are seeking a motivated and detail-oriented Civil Engineer to join our team in Chennai. As a fresh graduate, you will have the opportunity to work on exciting projects and develop your skills in the civil engineering field.Key Responsibilities: - Design and Planning: Collaborate with senior engineers to create detailed designs for infrastructure projects, ensuring they meet safety and quality standards. - Site Inspection: Conduct regular site visits to monitor progress, assess quality of work, and ensure compliance with design specifications. - Technical Analysis: Analyze data, prepare reports, and contribute to the evaluation of project feasibility and design options. - Collaboration: Work closely with architects, surveyors, and other professionals to ensure smooth project execution. - Documentation: Maintain precise records of project activities, including drawings and calculations, for future reference and reporting.Required Skills and Expectations: The ideal candidate should hold a degree in Civil Engineering and possess strong analytical and problem-solving abilities. You should be proficient in using engineering software and tools. Effective communication skills are essential for collaborating with team members and stakeholders. A keen attention to detail and a commitment to high-quality work are also important. We prefer female candidates who are eager to learn and grow within a full-time office environment. A proactive attitude and the ability to work independently and in teams are essential for success in this role.

We are looking for a motivated and talented female Mechanical Engineer to join our team in Chennai. This role is ideal for fresh graduates eager to apply their knowledge and skills in a dynamic work-from-home environment.Key Responsibilities: - Design and Analysis: Create and analyze mechanical components and systems using CAD software to ensure they meet industry standards and project specifications. - Project Support: Assist in various projects by providing technical support and collaborating with other team members to solve engineering challenges. - Documentation: Prepare detailed documentation of designs and processes, ensuring clear communication of project requirements and updates. - Research and Development: Engage in research to support innovative engineering solutions and stay updated with the latest technologies in the field.Required Skills and Expectations: Candidates should have a degree in mechanical engineering or a related field. Strong proficiency in CAD software is essential, along with a good understanding of engineering principles and materials. We expect excellent communication skills, a proactive mindset, and the ability to work independently while managing time effectively. Attention to detail and a passion for problem-solving will contribute to success in this role. As a fresh graduate, eagerness to learn and adapt in a fast-paced environment is highly valued.

We are looking for a dedicated Civil Engineer with 2 to 8 years of experience to join our team in Jidhafs. The ideal candidate will hold a diploma in civil engineering and should demonstrate strong technical skills and a commitment to quality and safety in construction projects.Key Responsibilities include:1. Project Planning: Collaborate with project managers to develop detailed plans for civil engineering projects, ensuring all activities are executed on time and within budget.2. Design and Analysis: Create and analyze engineering drawings and specifications to meet project requirements while adhering to industry standards and regulations.3. Site Supervision: Oversee construction sites to ensure compliance with design specifications, safety regulations, and quality standards, providing guidance to workers as needed.4. Problem Solving: Identify any issues that arise during construction and propose effective solutions to minimize delays and costs.5. Communication: Maintain clear communication with team members, clients, and subcontractors to ensure all parties are updated on project progress and any changes.To be successful in this role, candidates should possess strong analytical and problem-solving skills, attention to detail, and the ability to work well in a team. Proficiency in design software and engineering tools is highly desirable. Additionally, candidates must be organized, motivated, and capable of managing multiple tasks simultaneously in a fast-paced environment.

Coordinate daily operational activities and schedulesCommunicate with internal teams and external clientsMaintain records, reports, and operational documentsMonitor workflow and ensure timely task completionAssist in logistics, procurement, and inventory coordinationHandle emails, calls, and follow-ups professionallySupport management in planning and execution of projects

As a Product Development Executive, you will play a crucial role in creating and improving products to meet customer needs. You will work closely with various teams to bring innovative ideas to life. **Key Responsibilities:**- **Market Research:** Conduct research to understand customer preferences and market trends to identify potential product opportunities. This will help shape product features and functions.- **Product Design and Development:** Collaborate with design and engineering teams to develop new products. You will assist in creating prototypes and specifying requirements.- **Testing and Evaluation:** Participate in testing newly developed products to ensure they meet quality standards and customer expectations. Your feedback will be valuable for making necessary improvements.- **Documentation:** Maintain accurate records of product development processes, including specifications and testing results. This ensures that all team members are informed and can track progress.- **Collaboration:** Work with marketing and sales teams to understand customer feedback and adjust product strategies accordingly. Effective communication will help streamline the development process.**Required Skills and Expectations:**You should possess a degree or relevant qualification in a related field. Strong analytical skills are essential to interpret market data and make informed decisions. Good communication skills, both verbal and written, are necessary for collaborating with different teams. A creative mindset will help you contribute innovative ideas. Being detail-oriented is crucial for managing product details and ensuring quality. Proficiency in basic software tools for documentation and design will be beneficial. Candidates are expected to be proactive and eager to learn in a dynamic work environment.

Key ResponsibilitiesIncoming Material Inspection:Perform physical and dimensional inspections of raw materials, castings, forgings, or electronic components upon arrival.Interpret engineering drawings, blueprints, and standard inspection plans to verify parts accuracy.Gauge & Instrument Handling:Expertly operate standard precision measuring instruments such as Vernier Calipers, Micrometers, Height Gauges, Bore Gauges, and Thread Gauges.Ensure all inspection tools and instruments used are properly calibrated and maintained.Documentation & Reporting:Maintain detailed Incoming Inspection Reports (IIR) and update material status (Approved/Rejected/Hold) in the ERP or Excel tracking system.Generate Goods Receipt Notes (GRN) clearances for accepted batches.Rejection Management & Vendor Coordination:Identify deviations, issue Non-Conformance Reports (NCR) for defective materials, and isolate rejected stock in the designated red-bin/rejection area.Provide feedback and data to the Supplier Quality Assurance (SQA) team to help resolve recurring vendor issues.Process Compliance:Ensure compliance with ISO 9001, IATF 16949, or company-specific quality management systems.Practice 5S in the inspection area and follow proper material handling guidelines.