Mechanical Engineering Job Vacancies in Maharashtra

As a Roustabout based in Mumbai, you will play a vital role in supporting various operations within the oil and gas industry. This position is ideal for individuals looking to begin their careers in this field or those with up to four years of experience.Key Responsibilities:- **Equipment Maintenance**: Assist in the upkeep and repair of tools and machinery to ensure their proper functioning and longevity.- **Site Preparation**: Help prepare work sites by gathering materials and equipment needed for daily operations, ensuring that everything is ready for the team.- **Manual Labor**: Engage in physically demanding tasks such as lifting, moving, and positioning equipment or materials as required.- **Safety Practices**: Follow safety protocols and procedures to maintain a safe working environment for yourself and your team.- **Team Support**: Collaborate with other workers and supervisors to complete various tasks on-site, fostering an effective team dynamic.Required Skills and Expectations:Candidates should have a diploma in any relevant field. Physical fitness is crucial, as the role involves considerable manual labor. You should be able to work well in a team and communicate effectively with colleagues. Being dependable and punctual is essential. A willingness to learn and follow instructions closely will be important for your success in this position. Flexibility and adaptability in a dynamic work environment will also be highly valued.

Aircraft Maintenance professionals are responsible for inspecting, repairing, and maintaining aircraft systems to ensure safety, airworthiness, and compliance with aviation regulations. They work on airframes, engines, electrical systems, and avionics. Key Responsibilities1. Inspection & MaintenanceConduct routine inspections before and after flightsPerform scheduled maintenance (A-check, B-check, C-check, D-check)Diagnose mechanical and technical faults2. Repair & TroubleshootingRepair or replace defective aircraft componentsTroubleshoot engine, hydraulic, and electrical issuesUse diagnostic tools and maintenance manuals3. Testing & Quality ControlTest aircraft systems after maintenanceEnsure all systems meet safety standardsPerform functional and operational checks4. DocumentationMaintain accurate maintenance logs and recordsEnsure compliance with aviation authoritiesReport defects and corrective actions5. Safety ComplianceFollow strict aviation safety regulationsUse proper tools and protective equipmentEnsure aircraft meets airworthiness standards Types of Aircraft MaintenanceLine Maintenance - Routine checks at airportsBase Maintenance - Major repairs in hangarsPreventive Maintenance - Scheduled servicingCorrective Maintenance - Fixing faults/issues Education & QualificationsDiploma/Degree in Aircraft Maintenance Engineering or Aerospace EngineeringCertification from aviation authorities like:DGCA IndiaFAAEASAAME License (mandatory for certifying engineers) Required SkillsStrong technical and mechanical knowledgeAttention to detailProblem-solving abilityKnowledge of aircraft systems and toolsAbility to work under pressureGood communication and teamwork Tools & Equipment UsedDiagnostic testing equipmentHand and power toolsAircraft maintenance softwareTechnical manuals and blueprints Working ConditionsShift-based work (including nights and weekends)Work in hangars, airports, or outdoor environmentsPhysically demanding (lifting, climbing, bending)Exposure to noise and chemicals Career OpportunitiesAircraft Maintenance TechnicianLicensed Aircraft Maintenance EngineerQuality InspectorMaintenance SupervisorMRO SpecialistTop aviation employers include airlines, defense organizations, and companies like Air India, IndiGo, and SpiceJet. Salary (India Approx.)Fresher: 2.5 - 4 LPAExperienced: 5 - 12+ LPALicensed AME: 10 - 25+ LPA

Urgent OpeningMaintenance ExecutivePharmaceutical CompanyPalghar East PalgharSalary: Rs. 2 LPA to 5 LPAExperience: 2 Years to 8 YearsImmediate Joining shall be preferredEducation: Diploma in Mechanical/Electrical Engineering

We are Hiring Production Engineer for Pharmaceutical Company in Nagpur!!!Job role: Production EngineerEducation: B.E. Mechanical/Chemical/ElectricalExperienced: 2-3 YearsSalary: 25K for 2-3 years experience candidate & 30K for 3-5 years of experienced candidateJob location: Nagpur, MaharashtraSkills requiredDiploma/Degree in mechanical/Chemical/Electrical branchCandidate must have 2-3 years of experience in productionReady to join on immediate basisCandidate must have an experience in production departmentFor more details you can reach us on 7517361633

Industrial Engineer - BE Mechanical Production Dept-Data collection & DocumentationExcel Compulsory - Freshers/Experienced

Position: Design Engineer- Industry: Limited Company- Experience: 2-5 years- Salary: No bar for the right candidate (For Fresher Rs. 15000 -17000 as a Trainee Employee)Job Requirements- Education: Diploma/BE/B-Tech in Mechanical- Skills:- SolidWorks (mandatory)- AutoCAD- SPM design in automation- Pneumatic systems- Motor gearbox- Rotary and linear index table selection- Manufacturing knowledge in automation- Responsibilities:- Design and development- Documentation- Team handling- Industrial safetyInterview Process- Direct Face-to-Face Interview

We are looking for a motivated Design Engineer to join our team in Hingna, Nagpur. This is a full-time position suitable for recent graduates or those with up to two years of experience. The ideal candidate will help create and improve design solutions for our projects.Key Responsibilities:- **Concept Development**: Collaborate with teams to generate innovative design concepts that meet project requirements and specifications.- **Design Prototyping**: Create detailed drawings and prototypes using CAD software, ensuring accuracy and functionality in design.- **Product Testing**: Participate in testing and evaluating designs to identify potential issues and implement necessary improvements.- **Documentation**: Maintain comprehensive documentation of design processes, adjustments, and outcomes to support project tracking and future reference.- **Team Collaboration**: Work closely with engineers, project managers, and other stakeholders to ensure cohesive design integration across all projects.Required Skills and Expectations:Candidates should possess a degree in engineering or a related field, showcasing a solid understanding of design principles and engineering practices. Proficiency in CAD software is essential, coupled with strong analytical and problem-solving skills. Effective communication and teamwork abilities are crucial, as collaboration with various departments will be frequent. We expect candidates to be proactive, detail-oriented, and eager to learn in a dynamic work environment. A foundational knowledge of industry standards and regulations will also be beneficial for success in this role.

We are seeking a motivated and skilled Design Engineer with 1 to 5 years of experience for our office in Chakan, Pune. The ideal candidate will work on designing innovative solutions for our projects, collaborating with teams, and ensuring high-quality outputs. Key Responsibilities:1. Product Design: Create detailed design specifications and drawings using CAD software to meet project requirements. 2. Prototyping: Develop and test prototypes to evaluate design concepts, ensuring they function correctly and meet client needs.3. Collaboration: Work closely with other engineers, designers, and stakeholders to effectively communicate design ideas and modifications.4. Documentation: Maintain accurate documentation for design processes, including design calculations, specifications, and reports.5. Quality Assurance: Ensure that all designs comply with industry standards and customer requirements, performing necessary revisions based on feedback.Required Skills and Expectations:Candidates should hold a graduate degree in engineering or a related field. Proficiency in CAD software (such as AutoCAD or SolidWorks) is essential. Strong analytical skills and attention to detail are critical for identifying design flaws and developing solutions. Effective communication skills are necessary to collaborate with team members and present ideas clearly. The candidate should be able to adapt to changing project requirements and demonstrate a proactive approach to problem-solving. A commitment to producing high-quality work and the ability to work well under pressure are also important for success in this role.

We are looking for a skilled Design Engineer to join our team in Nashik. The ideal candidate should have 2 to 8 years of experience and a strong passion for design engineering.**Key Responsibilities:**- **Product Design:** Create innovative designs for new products using CAD software. You will be responsible for translating concepts and ideas into detailed drawings and models.- **Research and Development:** Conduct tests and simulations to validate designs. This involves analyzing data to ensure that products meet both functional and aesthetic requirements.- **Collaboration:** Work closely with other team members including engineers and project managers. Effective communication is essential to align designs with project goals and timelines.- **Documentation and Reporting:** Prepare technical documentation including specifications, design reports, and presentations. This helps maintain clarity and compliance throughout the development process.- **Quality Assurance:** Ensure that designs comply with industry standards and regulations. You will also be involved in identifying and resolving any design-related issues that arise during product development.**Required Skills and Expectations:**Candidates must possess strong proficiency in CAD software and have a solid understanding of engineering principles. Excellent problem-solving skills are essential for overcoming design challenges. A good level of communication and teamwork is expected, as you will frequently collaborate with different departments. A degree in Mechanical Engineering or a related field is preferred, along with a proactive approach to learning and adapting in a fast-paced work environment.

A Mechanical Engineer Researches, Designs, Develops, Tests, and Oversees the Manufacturing of Mechanical/thermal Devices, Including Tools, Engines, and Machines. They Analyze Problems, Create Solutions Using Cad Technology, and Ensure Systems are Safe and Efficient. Key Roles Involve Product Prototyping, Testing, and Managing Projects from Concept to Completion Across Industries like Automotive, Aerospace, and Manufacturingkey Responsibilitiesdesign & Development: Creating Blueprints for Mechanical Systems, Components, and Tools Using Cad Software.testing & Analysis: Developing Prototypes, Conducting Experiments, and Analyzing Data to Refine Designs.project Management: Managing Budgets, Timelines, and Technical Documentation.manufacturing & Maintenance: Overseeing Production Processes and Repairing/modifying Equipment.collaboration: Working with other Engineers and Suppliers to Ensure Compliance with Safety and Technical Standards.

1. Job Title: Jr. Design EngineerEducation: B.E/ B.Tech/Diploma in Mechanical Engineering or any related stream.Work experience: 1.5 to 2 years in DesignSoftware/Tool: Solid EdgeSkills:1. Design Knowledge of Piping and sheet metal2. Must have hands-on experience with Solid Edge3. Must know the fundamentals of mechanical engineering4. Must have good communication skills5. Having knowledge of solid works/ Auto desk inventor is an added advantage2. Job Title: Jr. Design EngineerEducation: B.E/ B.Tech/Diploma in Mechanical Engineering or any related stream.Work experience: 1.5 to 2 years in DesignSoftware/Tool: Solid WorksSkills:1. Design Knowledge of SPM/fixtures2. Must have hands-on experience with Solid Works3. Must know the fundamentals of mechanical engineering4. Must have good communication skills

Job Description Mechanical EngineersIndustry: Wastewater Processing / Environmental EngineeringLocation: NashikExperience: 15 YearsQualification:Mechanical Engineer: B.E./Diploma in Mechanical EngineeringAbout the RoleWe are hiring Mechanical Engineers for our Wastewater Treatment / ETP / STP operations. The selected candidates will be responsible for plant operations, process monitoring, equipment maintenance, and ensuring smooth functioning of the wastewater treatment systems.Key ResponsibilitiesFor Mechanical Engineering Profile:Operate and maintain mechanical equipment: pumps, blowers, agitators, compressors, valves, motors, etc.Perform preventive and corrective maintenance.Assist in installation, alignment, and servicing of mechanical and piping systems.Maintain equipment log sheets, lubrication schedules, and breakdown reports.Troubleshoot mechanical failures and coordinate with vendors for spare parts.Ensure mechanical systems run with maximum efficiency and minimum downtime.Common Responsibilities (Both Profiles):Support daily operation of ETP/STP/RO/UF/MBR units.Monitor process parameters and ensure optimal plant performance.Coordinate with the operations team for continuous and safe functioning.Follow all health, safety, and environmental guidelines.Prepare daily reports and communicate issues to management.Required SkillsStrong understanding of wastewater treatment processes.Knowledge of safety protocols and PPE usage.Problem-solving & analytical mindset.Ability to work in plant/field conditions.Good communication and documentation skills.Salary Range18,000 40,000/month(Depends on experience, role, and plant operations)

We are Seeking a Detail-oriented and Analytical Quality Engineer for a 12-hour Shift to Ensure Our Products and Processes Meet Established Quality Standards. the Ideal Candidate Will Play a Key Role in Developing Quality Assurance Procedures, Inspecting Outputs, Identifying Issues, and Implementing Improvements Across Production or Service Lines.key Responsibilities:develop and Implement Quality Control Systems and Procedures.conduct Inspections and Tests of Products or Processes to Assess Quality.analyze Quality Data to Identify Trends, Root Causes, and Improvement Opportunities.collaborate with Cross-functional Teams (engineering, Production, Procurement) to Resolve Quality Issues.maintain and Update Documentation Related to Quality Standards and Processes.participate in Internal and External Audits and Support Compliance Efforts (e.g., Iso, As9100, Iatf 16949).review Specifications, Drawings, and Work Instructions to Ensure Alignment with Quality Standards.support Non-conformance Investigations and Corrective/preventive Actions (capa).train Staff On Quality Tools, Policies, and Best Practices.use Tools like Fmea, Spc, Ppap, and Six Sigma Methodologies for Continuous Improvement.requirements:bachelors Degree in Engineering, Quality Management, or a Related Field.[x]+ Years of Experience in Quality Engineering or Quality Assurance.knowledge of Quality Standards (iso 9001, As9100, Etc.).proficient in Quality Tools: Fmea, Control Plans, 8d, Root Cause Analysis, Etc.strong Analytical and Problem-solving Skills.experience with Inspection Equipment (calipers, Micrometers, Cmm, Etc.).excellent Communication and Interpersonal Skills.certification (cqe, Six Sigma, Etc.) is a Plus.preferred Skills:experience with [industry-specific Tools/software].understanding of Regulatory Requirements (fda, Iso 13485, Etc. for Medical Devices).erp or Quality Management System (qms) Experience

We are seeking a reliable and motivated General Utility Worker to join our team. In this role, you will help maintain a clean, safe, and efficient workspace to support daily operations. **Key Responsibilities:**- **General Cleaning:** Responsible for keeping the office environment clean and organized by sweeping, mopping, and dusting. This ensures a tidy space for employees and visitors.- **Maintenance Support:** Assist with basic maintenance tasks, such as fixing small repairs or reporting issues. This helps maintain the functionality of equipment and facilities.- **Material Handling:** Move and arrange furniture, supplies, and equipment as needed. This supports various departments during events or reorganization.- **Waste Management:** Collect and dispose of trash and recyclables regularly. This promotes a sustainable and environmentally friendly workplace.- **Safety Compliance:** Follow safety regulations and report hazards to ensure a safe work environment for all staff.**Required Skills and Expectations:**- Candidates should possess a relevant educational background including vocational courses or degrees in any field like B.A, B.C.A, B.B.A, B.Sc, or B.E. - A positive attitude and willingness to learn are crucial, as you will work closely with other team members.- Good communication skills are necessary for effectively reporting issues and collaborating with colleagues.- Physical stamina and the ability to perform manual tasks are important, as the job involves lifting and moving materials.- Punctuality and reliability are expected to maintain work schedules consistently.

DESCRIPTIONCompany is offering the best opportunities for the candidates working on ONGC Platform Jack Rigs, Platforms, Drilling Offshore services for positions listed below.Roustabout- Nos 250Offshore Documents REQ: Basic offshore Induction and emergency training (BOSIET).Or STCW-2010,HUET, H2S,Note: We have to arrange offshore Training Certifications if anyone dont have.Education Documents REQ:10th,12th & Degree Certificate.Identity Documents REQ:Passport.Crew Manager-; Mr. Vijay sir

DESCRIPTIONCompany is offering the best opportunities for the candidates working on ONGC Platform Jack Rigs, Platforms, Drilling Offshore services for positions listed below.Roustabout- Nos 250Offshore Documents REQ: Basic offshore Induction and emergency training (BOSIET).Or STCW-2010,HUET, H2S,Note: We have to arrange offshore Training Certifications if anyone dont have.Education Documents REQ:10th,12th & Degree Certificate.Identity Documents REQ:Passport.Crew Manager-; Mr. Vijay sir

We are seeking a motivated Production Supervisor to join our team in Chakan Pune. This entry-level role is perfect for recent graduates who want to kickstart their career in manufacturing and production management.Key Responsibilities:1. **Supervise Production Activities**: Oversee daily production operations to ensure that all tasks are completed on time and meet quality standards.2. **Coordinate Team Efforts**: Collaborate with team members to ensure smooth workflow and resolve any issues that may arise during the production process.3. **Monitor Equipment Performance**: Keep an eye on machinery and tools to ensure they are functioning properly and report any maintenance needs or malfunctions.4. **Ensure Compliance**: Maintain safety and cleanliness in the production area by ensuring all team members follow safety protocols and company policies.5. **Train New Staff**: Assist in onboarding and training new team members to help them understand their roles and responsibilities effectively.Required Skills and Expectations:Candidates should possess a bachelor

Tool & Die MakerMaleFreshers/ExperiencedSal-17 to 22 KGeneral ShiftNashik

Hiring Freshers- Male - Quality Engineer2024/2025 BatchSal-14 to 18 KNashik

Design EngineerBE Mechanical- MaleExp: 2-3 YrsPressure vessel heat transfer fabrication lineAutoCAD, 2D CADSal:20 to 30 KNashik

We are Hiring Maintenance Engineer for Pharmaceutical Company in Nagpur!!!Job Role : Maintenance EngineerEducation: B.E. Mechanical BranchExperience: 3-5 YearsJob Location: Nagpur, MaharashtraPay: 25,000.00 - 35,000.00 per monthPosition OverviewThe Mechanical Maintenance Engineer is responsible for ensuring the reliable operation, maintenance, and repair of mechanical systems and equipment in a pharmaceutical manufacturing facility. This role involves performing preventive and corrective maintenance, troubleshooting equipment issues, and supporting compliance with regulatory standards to maintain production efficiency and safety.Key ResponsibilitiesEquipment Maintenance: Perform routine preventive maintenance, inspections, and repairs on mechanical systems, including HVAC, pumps, compressors, conveyors, and other pharmaceutical manufacturing equipment.Troubleshooting & Repairs: Diagnose mechanical failures, identify root causes, and implement corrective actions to minimize downtime and ensure operational continuity.Compliance & Documentation: Ensure all maintenance activities comply with Good Manufacturing Practices (GMP), FDA, and other regulatory standards. Maintain accurate records of maintenance activities, including work orders and equipment logs.Installation & Commissioning: Assist in the installation, testing, and commissioning of new mechanical equipment and systems, ensuring alignment with operational and regulatory requirements.Spare Parts Management: Monitor inventory of spare parts, recommend procurement, and ensure availability of critical components to support maintenance schedules.Collaboration: Work closely with production teams, quality assurance, and other engineering disciplines to optimize equipment performance and support manufacturing goals.Safety & Risk Management: Adhere to safety protocols, conduct risk assessments, and implement measures to maintain a safe working environment.Continuous Improvement: Identify opportunities for process and equipment improvements, implement modifications, and support lean manufacturing initiatives.QualificationsEducation: Bachelors degree in Mechanical Engineering or a related field.Experience: Minimum of 3-5 years of experience in mechanical maintenance, preferably in a pharmaceutical or regulated manufacturing environment.Technical Skills:Proficiency in maintaining and troubleshooting mechanical systems such as HVAC, pumps, motors, and pneumatic systems.Knowledge of GMP, FDA regulations, and other pharmaceutical industry standards.Familiarity with Computerized Maintenance Management Systems (CMMS).Soft Skills:Strong problem-solving and analytical skills.Excellent communication and teamwork abilities.Ability to work under pressure and manage multiple priorities.BenefitsCompetitive salary and performance-based bonuses.Health, dental, and vision insurance.Paid time off and holidays.Opportunities for professional development and career advancement.Note: This job description is intended to convey information essential to understanding the scope of the position and is not exhaustive. Duties and responsibilities may evolve based on organizational needs.

Urgent openingProduction EngineerEducation: Mechanical Engineering/DiplomaFabricationExperience: 2 to 3 Years, Fabrication workJob Location: Palghar West, BIDCO Road,Immediate joining is required

Urgent OpeningProduction Supervisor/ITI MechanicalLocation: Palghar West, BIDCO Road, Salary: Rs. 14,000/-PM to Rs. 20,000/-PM

Urgent OpeningQA/QC Engineer (Engineering Equipment Manufacturing Company)Job Location: Badlapur, MIDC, Navi Mumbai Working Days: Monday to Saturday Timing - Monday-Saturday 8:30- 5 pm Years of Experience: 2-4 years Experience in QA/QC ASNT/ISNT Level II in TOFD/PAUT, RT, UT, MPI, DPT. If not Available, it's okay. 4. Should have work experience with third-party inspection agencies Education: Mechanical Degree/Diploma Reporting to QA/QC Manager Roles and Responsibilities 1. Carrying out QA/QC activities of process equipment such as storage tanks, Heat Exchangers, Pressure Vessels, Agitators, Reactors AND Structural Fabrication items such as Girders, pre-fabricated structures, mining equipment, etc. 2. Preparing QAP/WPS/WPQ/PQR as per job requirements 3. Preparing stage-wise inspection reports, carrying out inspections 4. Assisting third-party inspectors during inspection 5. Welder qualification activities 6. NDT review

Position: Design Engineer- Industry: Limited Company- Experience: 2-5 years- Salary: No bar for the right candidate (For Fresher Rs. 15000 -17000 as a Trainee Employee)Job Requirements- Education: Diploma/BE/B-Tech in Mechanical- Skills:- SolidWorks (mandatory)- AutoCAD- SPM design in automation- Pneumatic systems- Motor gearbox- Rotary and linear index table selection- Manufacturing knowledge in automation- Responsibilities:- Design and development- Documentation- Team handling- Industrial safetyInterview Process- Direct Face-to-Face InterviewSolar Engineer in Project and Design available in Thane Area

Position: Design Engineer- Industry: Limited Company- Experience: 2-5 years- Salary: No bar for the right candidate (For Fresher Rs. 15000 -17000 as a Trainee Employee)Job Requirements- Education: Diploma/BE/B-Tech in Mechanical- Skills:- SolidWorks (mandatory)- AutoCAD- SPM design in automation- Pneumatic systems- Motor gearbox- Rotary and linear index table selection- Manufacturing knowledge in automation- Responsibilities:- Design and development- Documentation- Team handling- Industrial safetyInterview Process- Direct Face-to-Face Interview

Candidates should be a Mechanical engineering background with Industrial sales, or operation, or design or manufacturing experience