Systems Engineer Job Vacancies in Delhi NCR

PHYLayer EngineerWireless & Optical Wireless Communications Signal Processing FPGAFunctionLevelEducationExperienceLocationResearch & Development - Optical Wireless PHYSenior Physical Layer DeveloperM.Tech / M.S. / Ph.D. - ECE, EE, Signal Processing5-8 years PhD counts as experienceOn-siteResponsibilities Design and develop PHY algorithms for LiFi and FSO - modulation (OOK, PPM, DCO-OFDM, ACO-OFDM),channel coding (LDPC, Polar, RS), and synchronisation Model and simulate optical wireless channels: atmospheric turbulence, pointing errors, IM/DD receiver noise,ambient light interference, and LED/laser non-linearities Build end-to-end link-level simulation chains in MATLAB or Python and evaluate BER, throughput, andspectral efficiency under realistic conditions Implement validated algorithms on FPGA - translate fixed-point models into RTL or HLS; own algorithmcorrectness through hardware validation Write bit-exact C/C++ reference models to support hardware verification Track andengage with relevant standards: IEEE 802.11bb (LiFi), ITU-T FSO, and adjacent wireless standardsRequired M.Tech, M.S., or Ph.D. in ECE, Electrical Engineering, Signal Processing, or a related field - thesis or researchin optical wireless, VLC, or wireless communications is a strong indicator Strong fundamentals in digital communications: modulation, channel coding, detection, estimation, andsynchronisation Hands-on experience building PHY simulations from scratch in MATLAB or Python - not just toolboxes Solid understanding of OFDM: multipath channels, cyclic prefix, pilot design, and channel estimation Fixed-point thinking - ability to design algorithms aware of hardware quantisation and implementation cost FPGAawareness: understand LUT/DSP/BRAM trade-offs, pipelining, and timing well enough to makehardware-friendly algorithm decisions Familiarity with VHDL or Verilog to write or review RTL for PHY blocks Exposure to AMD/Xilinx Vivado - simulation, synthesis, and reading timing and resource reports Working knowledge of at least one wireless or optical wireless standard; ability to read and implement fromspec documentsPreferred Experience with 3Gpp, IEEE 802.11bb (LiFi) or ITU FSO link specifications Optical channel modelling: log-normal turbulence, Gamma-Gamma distribution, pointing error statistics LEDnon-linearity, predistortion, and flicker mitigation for VLC systems Optical MIMO, spatial diversity techniques, and APD / PIN photodetector front-end modelling Cellular or 5G NR PHY background - OFDM, LDPC, channel coding chain SDRplatforms: Ettus USRP and GNU Radio for over-the-air prototyping Linux environment and Python / Bash scripting for toolchain automation Vitis HLS or OpenCL-based FPGA acceleration flows Publications in IEEE Photonics, IEEE Communications Letters, JOCN, or equivalent venuesResearch ProfileWe are open to two architect types: M.Tech or PhD with thesis in VLC, OWC, optical OFDM, or wireless channel modelling - research outputmatters more than years of industry experience Wireless PHY engineer from industry looking to move into R&D - trainable on the optical wireless domain ifthe PHY and FPGA fundamentals are strong

As an Electrical Automation Engineer, you will be responsible for designing, developing, and maintaining electrical automation systems. You will work closely with various engineering teams to ensure efficiency and reliability in production processes. Your role will include:- **System Design and Development**: Creating detailed designs for electrical automation systems, ensuring they meet project requirements and industry standards.- **Installation and Commissioning**: Overseeing the installation and commissioning of automation systems, ensuring they are set up correctly and function as intended.- **Troubleshooting and Maintenance**: Diagnosing issues in existing automation systems and implementing effective solutions to minimize downtime.- **Collaboration with Teams**: Working alongside mechanical and software engineers to integrate systems and optimize overall performance.- **Documentation and Reporting**: Maintaining clear documentation of all designs, modifications, and troubleshooting procedures, and preparing regular reports for management.To be successful in this role, you should possess a B.E or an equivalent advanced/higher diploma, along with 2 to 5 years of relevant experience in electrical automation. Proficiency in programming languages related to automation systems is essential. You should also have a strong understanding of electrical circuits, sensors, and control systems. Effective communication skills and the ability to work collaboratively in a team environment are important. A willingness to learn and adapt to new technologies will also contribute to your success in this position.

As a CCTV Technician at our Moti Nagar location, you will play a crucial role in ensuring that all surveillance systems are properly installed, maintained, and functioning effectively. **Key Responsibilities:**- **Installation of CCTV Systems:** You will set up cameras and security systems in various properties, ensuring they are installed according to specifications for optimal coverage.- **Regular Maintenance:** You will routinely check and maintain existing CCTV systems to ensure they are operating effectively, identifying any issues that need fixing.- **Troubleshooting Issues:** If any problems arise with the CCTV equipment, you will diagnose and resolve the issues promptly, minimizing downtime.- **Wiring and Cabling:** You will be responsible for laying cables and ensuring that all wiring is neatly organized and secure to prevent damage or disconnections.- **User Training:** You will educate clients on how to use their CCTV systems, ensuring they understand all features and functions for better security management.**Required Skills and Expectations:**- Basic knowledge of CCTV systems and technology is important, even if you are new to the field.- Strong problem-solving skills will help you diagnose and fix issues efficiently.- Good communication skills are essential for interacting with clients and team members effectively.- A proactive attitude is crucial, as you must be willing to learn and adapt to new technologies.- As this is a full-time office role, punctuality and a strong work ethic are expected at all times.

Job ResponsibilitiesDiagnose and repair electronic equipment, PCBs, control cards, SMPS, inverters, drives, chargers, and industrial electronics.Perform troubleshooting of faulty components using testing instruments.Soldering, desoldering, component replacement, and circuit-level repair.Test repaired units and ensure proper working condition.Prepare service reports and maintain repair records.Coordinate with clients and internal team for repair status updates.Support on-site service work when required.Maintain safety and quality standards in repair work.Required QualificationsDiploma in Electronics Engineering, ECE.Freshers and experienced candidates can apply.Basic knowledge of electronics components and circuits.Hands-on knowledge of multimeter, oscilloscope, soldering station preferred.Good troubleshooting and problem-solving skills.Basic computer knowledge for reports and communication.Preferred SkillsExperience in inverter repair / PCB repair / industrial automation equipment.Knowledge of power electronics and control systems.Ability to work independently and in team environment.Salary & BenefitsAttractive salary based on skills and experience.Performance incentives.Career growth opportunities.Technical learning and training support.

CCTV installationTroubleshootingCCTV configurationAccess control systemsCabling NetworkingTechnical supportConfiguration ip & non ip cctvVDP, Bio MetricCustomer serviceKnowledge of cctv cameras

We required cctv camera technician, biometric installation,ip camera,hd camera installation, video door phone, electric lock installation.

An HVAC Design Engineering Trainer is responsible for teaching, guiding, and mentoring students or working professionals in the principles, tools, and practices of HVAC (Heating, Ventilation Air Conditioning) design. The trainer delivers structured training using real-world examples, practical exercises, and industry-standard software to prepare learners for careers in HVAC design Trainer.Core Skills & CompetenciesStrong technical knowledge of HVAC systems principles, design standards, and calculations.Excellent command of HVAC design tools/software (AutoCAD, Revit, HAP.).Ability to explain complex engineering concepts in a clear, structured.Ability to design labs, assignments, and project-based exercises.Problem-solving mindset and mentoring attitude.

As a Mechanical Engineer, you will be responsible for designing, testing, and implementing mechanical systems and processes. Your key responsibilities will include conducting research, analyzing data, developing prototypes, and collaborating with cross-functional teams to ensure the efficiency and reliability of mechanical systems. You will be expected to possess strong technical skills in areas such as thermodynamics, fluid mechanics, and materials science. Proficiency in CAD software and experience in designing mechanical components will be essential. Additionally, you should have excellent problem-solving abilities, attention to detail, and the ability to work well under pressure. Effective communication skills and the ability to work collaboratively with a team are also important in this role.The ideal candidate will have 1-4 years of experience in a similar role and possess at least a 12th Pass education. This position is open to male candidates and requires full-time availability for work from the office in Gurgaon, India.

Post: Automation Sales EngineerJob Location: Delhi, NCR, NoidaCompany: Automation SystemsWhatsapp/Mobile: 9899546490Strong understanding of PLCs, VFDs, SCADA, robotics, and IoTprepare comprehensive techno-commercial proposals.Required Candidate profileThe role involves selling electrical switchgear, power distribution panels, software solutions, Energy Management Systems (EMS), and automation solutions based on DCS, PLC, SCADA, and VFD technologies

Hiring for 05 Electronics Service Engineer Jobs in Delhi, for Freshers,Required Educational Qualification is : 12th Pass, I.T.I., B.A, B.Com, B.Sc, B.Tech with Good knowledge in Knowledge of Electronics/Electrical, DFMD etc.

All tipe cabling and wifi and cctv installation rack and jack panel and io

1. Supervise and execute HVAC installation work as per design drawings and project specifications.2. Coordinate with clients, consultants, and internal teams to ensure smooth project execution.3. Manage site activities including ducting, piping, insulation, and equipment installation.4. Ensure timely availability of manpower, materials, and tools at the site.5. Conduct site inspections and ensure compliance with quality and safety standards.6. Support testing, balancing, and commissioning of HVAC systems.7. Prepare and maintain site reports, progress updates, and daily work logs.8. Identify and resolve technical issues and report deviations to the Project Manager.9. Assist in quantity estimation and material reconciliation for ongoing projects.10. Required Qualifications and Skills:11. Education: Diploma / B.E. / B.Tech in Mechanical Engineering.12. Experience: 2 4 years of experience in HVAC project execution or site supervision.13. Strong understanding of HVAC systems, drawings, and installation procedures.14. Ability to read and interpret mechanical drawings and technical specifications.15. Good communication and team coordination skills.16. Knowledge of project planning, material handling, and safety protocols.17. Proficient in MS Office (Excel, Word) and basic AutoCAD

Install and commission UPS systems and batteries.Perform preventive and corrective maintenance.Diagnose and repair electrical/electronic faults.Provide technical support and service reports.Follow safety and quality standards.

Role: Electrical Automation EngineerWork Experience: 0-1 years.Work Location: Delhi NCRMust-Have Skills: SCADA, PLC, HMI, VFD.Job Description:Development, Programming, Troubleshooting & Modification: Should have expertise in Development, Programming, troubleshooting & Modification of automation Products (PLC, HMI/SCADA, VFD, SERVO, RTU etc).Commissioning: Visiting onsite to ensure if commissioning is done within the time frame. Providing timely Feedback on the ground realities through documentation to the Core Engineering and Manufacturing teams. Strong analytic, verbal, and written communication skills.contact on +91-8882999066

Sales Engineer IIoT / Automation SolutionsRole Overview:We are seeking a Sales Specialist / Sales Engineer to drive business development for our Industrial IoT and Automation Solutions. The candidate will bridge technical understanding with customer needs, manage end-to-end sales cycles, and build long-term client relationships.Key Responsibilities:Identify potential clients and build a strong sales pipeline.Understand customer challenges and propose suitable automation or IoT solutions.Conduct product demos, presentations, and proof-of-concept sessions.Prepare proposals, negotiate terms, and close business deals.Maintain strong relationships with existing clients and explore upselling opportunities.Required Skills & Experience:B.Tech in Engineering with MBA (preferred).34 years of experience in automation, IIoT, or industrial sales.Good understanding of control systems, SCADA, IoT, and smart manufacturing.Excellent communication, negotiation, and presentation skills.Proven record of meeting or exceeding sales targets.

Proficiency in Embedded C/C++ programming. Hands-on experience with microcontrollers like NXP, PIC, and Texas Instruments. PreferablySTM32 microcontrollers. Experience with IDEs and development tools such as IAR Workbench, CCS, e2 Studio,STM32 Cube IDE, Kiel Micro vision. Strong understanding of communication protocols like Bluetooth, USB, UART, Modbus, I2C,SPI, Ethernet, Wi-Fi, and RF.Department: Research and Development Knowledge of tools like Digital Storage Oscilloscope (DSO), multimeters, andfunction generator for debugging hardware. Experience with Unit Testing and System Testing. Experience with RTOS development and integration. Hands-on experience with hardware debugging and schematic interpretation. Familiarity GPS, and GPRS communication modules. Experience working with various sensors and embedded application development. Successful completion of 2-3 firmware development projects. Strong problem-solving skills and attention to detail in both hardware and firmware contexts. Working experience with Ethernet and Wi-Fi communication in embedded systems. Familiarity with GIT version control systems. Knowledge of project management tools like Jira. Understanding of low-power design and optimization for embedded devices. Ability to work independently and collaborate within a cross-functional team. Familiarity with JSON and API testing platform like Postman or similar tools.

Job descriptionWe are seeking a highly experienced Senior Billing Engineer to manage and oversee all billing operations across construction projects. The role involves preparing and validating contractor bills, ensuring accurate measurement of works, verifying BOQs, and maintaining documentation for client billing and subcontractor payments. The ideal candidate should bring both technical and commercial expertise to ensure timely and accurate project billing and cost controlKey Responsibilities: Prepare and review client and subcontractor RA (Running Account) bills as per actual work progress. Verify BOQ quantities, site measurements, and work completion certificates. Coordinate with site teams, quantity surveyors, and project managers to obtain and confirm billing inputs. Review contract terms, rate analysis, and change orders to ensure billing accuracy. Maintain accurate and up-to-date billing logs, cost statements, and supporting documentation. Ensure timely submission of bills to clients and follow up for certification and payment. Validate and process subcontractor/vendor invoices as per work orders and site execution. Coordinate with finance and accounts departments for reconciliations and audits. Analyze deviations between billed quantities and executed work to control project costs. Ensure compliance with tax regulations (e.g., GST, TDS) and contractual obligations. Provide inputs for project cash flow, budgeting, and cost-to-complete reports. Lead or mentor junior billing engineers and ensure process efficiency.Qualifications & Skills: Education: B.E./B.Tech in Civil Engineering or equivalent Experience: 510 years in construction billing (buildings, infrastructure, industrial projects) Software Proficiency: MS Excel (advanced), AutoCAD, ERP systems (SAP, Oracle, etc.), billing or QS software Key Skills: Strong knowledge of BOQ, DPR, RA bills, and contract billing Excellent understanding of construction drawings, estimation, and costing Good communication and coordination skills Attention to detail, analytical mindset, and strong documentation abilityPreferred: Experience working on government contracts, public sector infrastructure, or EPC projects Familiarity with CPWD/State PWD billing norms Certification in Quantity Surveying or Contract Management is a plus

Electronics Testing AssistantQualification: Diploma / ITI / B.Tech in Electronics, Electronics & Communication, Instrumentation, or a related field.Job SummaryWe are looking for a detail-oriented Electronics Testing Assistant to support product testing, troubleshooting, validation, documentation, installation, commissioning, and customer support. The role involves both laboratory and field work, including travel to customer sites across India.Key ResponsibilitiesPerform functional, performance, reliability, and environmental testing of electronic products.Troubleshoot hardware and embedded systems and assist in root cause analysis.Support hardware assembly, wiring, integration, and test setup.Operate test equipment including multimeters, oscilloscopes, power supplies, signal generators, and spectrum analyzers.Conduct PCB testing, debugging, firmware loading, device configuration, and software validation.Maintain test records, reports, calibration logs, and quality documentation.Coordinate with Engineering, R&D, and Quality teams during product validation.Visit customer sites for installation, commissioning, alignment, testing, troubleshooting, and preventive maintenance.Prepare installation, commissioning, and site visit reports while providing technical support during deployments and customer acceptance testing.Required SkillsKnowledge of analog & digital electronics.Hardware testing, PCB debugging, and embedded systems.Ability to read schematics and wiring diagrams.Familiarity with oscilloscopes, multimeters, power supplies, and laboratory instruments.Basic networking (Ethernet, TCP/IP).MS Office proficiency.Strong troubleshooting, analytical, communication, and documentation skills.Willingness to travel extensively across India.Preferred SkillsExperience in electronics testing, validation, or quality assurance.Knowledge of RF, Optical Communication, LiFi, Wireless Communication, or Networking.PCB soldering, rework, firmware flashing, and hardware debugging.Linux/Windows testing environments.Understanding of EMI/EMC, product qualification, and reliability testing.Additional RequirementsImmediate joiners preferred.Valid driving license is an advantage.Self-motivated, responsible, detail-oriented, and capable of working independently or in a team.

Were looking for a Planning Manager MEP to lead Our engineering and design office across all MEP disciplines (Mechanical, Electrical, Plumbing, Firefighting). This is a pivotal role responsible for translating BOQs into precise IFC drawings, managing the design & drawing pipeline, and ensuring error-free release to site teams for execution. You will serve as the technical anchor between client consultants, internal execution teams, and our project planning functiondriving design integrity, drawing standardization, and pre execution clarity.Key ResponsibilitiesEngineering & Design LeadershipLead the end-to-end engineering and design process for all MEP trades across multiple industrial projects.Ensure accurate, coordinated, and timely release of GFC/IFC drawings based on approved BOQs and site constraints.Manage a design team comprising Draftsmen and Design Engineers across HVAC, Electrical, Fire, Plumbing, and Process Utilities.Drive adherence to CEs design standards, drawing templates, and version control protocols.Planning & CoordinationCollaborate with the Projects team to align design outputs with execution milestones and material procurement schedules.Conduct drawing review meetings with internal teams and consultants to ensure buildability and alignment with site conditions.Anticipate design bottlenecks, resolve clashes, and proactively revise layouts to meet evolving site realities.Ensure correct design quantities for each item and version-control drawing releases are updated on PromaschStakeholder ManagementInterface with client engineers and consultants for design approvals and technical clarifications.Support estimation and costing teams by validating quantities, sections, and part-level design inputs.Provide engineering sign-off before every material release and major construction milestone.Team LeadershipGuide, mentor, and manage a team of 56 Draftsmen and 23 Design Engineers.Establish a system of quality checks and peer reviews before drawings are released.Foster a culture of technical excellence, ownership, and collaboration.Ideal Candidate ProfileEducationB.E./B.Tech in Mechanical or Electrical Engineering (preferred: with MEP design exposure)AutoCAD, Revit, or BIM exposure is a strong advantageExperience15-18 years of experience in MEP engineering and designStrong background in industrial projects, cleanrooms, data centers, or high-spec industrial infrastructureExperience in leading multi-disciplinary MEP design teamsFamiliarity with HVAC loads, DBR, lighting layouts, cable tray routing, plumbing risers, etc.SkillsStrong AutoCAD proficiency (2D; 3D a plus),Working knowledge of MEP design codes (ASHRAE, NBC, IS, NFPA, etc.)Excellent cross-functional communicationcomfortable engaging with Project Managers, Procurement, QA/QC, and ClientsAbility to lead from the front under tight timelines and coordinate parallel work streams

The Electrical Design Engineer is responsible for designing and developing electrical systems for building and infrastructure projects. The role ensures efficient, safe, and code-compliant electricaldesigns covering power distribution, lighting, and low-voltage systems.Key Responsibilities:1. Electrical System Design (HT/LT):- Collaborate with project teams to understand client requirements and electrical load needs.- Prepare electrical load calculations and power distribution layouts including control schematics.- Design lighting systems, emergency power, grounding & earthing systems, and lightning protection etc.- Selection and sizing of equipment including Transformers, Generators, UPS, Panels, Circuit Breakers, Cables, and Switchgear etc.- Prepare detailed single-line diagrams (SLDs), wiring/control schematics, and equipment layouts.- Design of ELV systems (Fire Alarm, CCTV, Access Control, Data & Communication).- Carry out HV, LV and EIV with load calculations and system design2. Code Compliance:- Ensure compliance with IEC, NEC, IS, and local authority regulations.- Stay updated on latest electrical codes, standards, and sustainable design practices.3. Technical Support:- Provide technical input during design development and construction.- Assist in resolving site-related issues and ensure adherence to design intent.4. Documentation:- Prepare and maintain electrical design reports, drawings, and calculation sheets.- Maintain clear and accessible documentation for project teams/records.Qualifications:- Diploma or Bachelors degree in Electrical Engineering.- Minimum 5 years of experience in electrical design.- Strong knowledge of electrical design principles, power distribution, and low-voltage systems.- Proficiency in AutoCAD, Revit MEP, or similar software.- Knowledge of load analysis software (ETAP, Dialux, etc.) preferred.- Effective communication and collaboration skills. - Attention to detail and strong organizational skills.

The MEPF Design Engineer is responsible for designing and developing Mechanical, Electrical, and Plumbing systems & Fire Fighting for building and infrastructure projects. This role involvesdelivering efficient, sustainable, and code-compliant MEPF designs that meet client requirements, project specifications, and industry standards.Key Responsibilities:1. MEPF System Design:- Collaborate with clients, architects, and project stakeholders to understand project scope and objectives.- Prepare integrated MEP system designs including HVAC, Electrical, Plumbing, and Fire Fighting.- Conduct engineering calculations for load, capacity, and sizing of systems etc.- Develop layouts for ducts, pipes, cable trays, and equipment & schematics.- Selection of equipment including Chillers, Pumps, AHUs, Transformers, Generators, Switchgear, and Plumbing Fixtures etc.- Ensure detailed engineering drawings, schematics, and specifications are made as per system requirement.2. Code Compliance:- Ensure all designs comply with local, national, and international codes (ASHRAE, NFPA, IEC, IS, NBC, etc.).- Stay updated on changes in building codes and best practices.3. Coordination & Support:- Coordinate between Mechanical, Electrical, Plumbing and Fire Fighting disciplines to resolve design integration.- Provide technical support as may be required during construction, addressing queries and ensuring design intent is met.4. Documentation:- Prepare and maintain design files, calculations, technical reports, and specifications.- Ensure proper version control and organized documentation for records.Qualifications:- Diploma or Bachelors degree in Mechanical/Electrical Engineering.- Minimum 5 years of experience in MEPF design.- Strong knowledge of MEPF systems, principles, and standards.- Proficiency in AutoCAD, Revit MEP, HAP, Navisworks and other related design software.- Strong teamwork and communication skills.

Proficiency in Embedded C/C++ programming. Hands-on experience with microcontrollers like NXP, PIC, and Texas Instruments. PreferablySTM32 microcontrollers. Experience with IDEs and development tools such as IAR Workbench, CCS, e2 Studio,STM32 Cube IDE, Kiel Micro vision. Strong understanding of communication protocols like Bluetooth, USB, UART, Modbus, I2C,SPI, Ethernet, Wi-Fi, and RF.