Service Engineer Job Vacancies in Delhi NCR

We are looking for enthusiastic and technically skilled candidates to join our team as a Sales & Service Engineer for German-made industrial machines.Job Position: Sales & Service EngineerIndustry: Industrial Machinery / AutomationExperience: Freshers can applyQualification: Engineering Degree / Diploma / ITI in Electrical or ElectronicsKey ResponsibilitiesInstallation, servicing, and maintenance of German-made machinesTechnical troubleshooting and on-site customer supportClient coordination for machine demonstrations and service visitsAssisting customers with operational guidance and technical queriesPreparing service reports and maintaining professional communication with clientsCandidate RequirementsBasic knowledge of Electrical/Electronics systemsWillingness to travel for customer visits and service assignmentsMust own:Two-wheelerLaptopAndroid phoneCandidates looking to start their career in industrial machinery and technical services are encouraged to apply

Assembly of flight simulators Maintain and sustain operations of training devices to regulatory standardsProviding total support serviceComputer hardware and basic networking skill implementationPerforming simulator updates (software and hardware)Correct installation and calibration of training devices componentsKnowledge of CAR will be an added advantage

Job descriptionWe are hiring Service Engineers responsible for installation, servicing, and troubleshooting of systems.Installation and servicing of equipmentTroubleshooting and maintenanceProvide on-site technical supportEnsure customer satisfactionRequired Candidate profileRequirements Technical qualification (Diploma/Engineering) Strong troubleshooting skills Willingness to travelThanks & Regards,Satish Kohli AM- HRTalent Acquisition Department

Job ResponsibilitiesDiagnose and repair electronic equipment, PCBs, control cards, SMPS, inverters, drives, chargers, and industrial electronics.Perform troubleshooting of faulty components using testing instruments.Soldering, desoldering, component replacement, and circuit-level repair.Test repaired units and ensure proper working condition.Prepare service reports and maintain repair records.Coordinate with clients and internal team for repair status updates.Support on-site service work when required.Maintain safety and quality standards in repair work.Required QualificationsDiploma in Electronics Engineering, ECE.Freshers and experienced candidates can apply.Basic knowledge of electronics components and circuits.Hands-on knowledge of multimeter, oscilloscope, soldering station preferred.Good troubleshooting and problem-solving skills.Basic computer knowledge for reports and communication.Preferred SkillsExperience in inverter repair / PCB repair / industrial automation equipment.Knowledge of power electronics and control systems.Ability to work independently and in team environment.Salary & BenefitsAttractive salary based on skills and experience.Performance incentives.Career growth opportunities.Technical learning and training support.

As a CCTV Technician at our Moti Nagar location, you will play a crucial role in ensuring that all surveillance systems are properly installed, maintained, and functioning effectively. **Key Responsibilities:**- **Installation of CCTV Systems:** You will set up cameras and security systems in various properties, ensuring they are installed according to specifications for optimal coverage.- **Regular Maintenance:** You will routinely check and maintain existing CCTV systems to ensure they are operating effectively, identifying any issues that need fixing.- **Troubleshooting Issues:** If any problems arise with the CCTV equipment, you will diagnose and resolve the issues promptly, minimizing downtime.- **Wiring and Cabling:** You will be responsible for laying cables and ensuring that all wiring is neatly organized and secure to prevent damage or disconnections.- **User Training:** You will educate clients on how to use their CCTV systems, ensuring they understand all features and functions for better security management.**Required Skills and Expectations:**- Basic knowledge of CCTV systems and technology is important, even if you are new to the field.- Strong problem-solving skills will help you diagnose and fix issues efficiently.- Good communication skills are essential for interacting with clients and team members effectively.- A proactive attitude is crucial, as you must be willing to learn and adapt to new technologies.- As this is a full-time office role, punctuality and a strong work ethic are expected at all times.

Required Engineer for Laptop and desktop repairing and installation in Gurgaon.

We are looking for an Electrical Engineer with 2 to 6 years of experience to join our team in Gurgaon. The ideal candidate will hold a diploma in electrical engineering and will work full time in the office. **Key Responsibilities:**- **Design Electrical Systems**: Create layouts and specifications for electrical systems to ensure compliance with safety standards and project requirements. - **Conduct Testing and Analysis**: Perform tests on electrical systems and components to identify issues and ensure they function properly. - **Collaborate with Teams**: Work with other engineers, technicians, and project managers to coordinate designs and projects effectively. - **Troubleshoot Problems**: Diagnose and resolve electrical issues, focusing on minimizing downtime and maintaining system efficiency. - **Prepare Technical Documentation**: Create and maintain detailed reports and documentation for projects, including schematics and installation instructions. **Required Skills and Expectations:**- Strong knowledge of electrical systems and components, including circuit design and safety standards.- Proficiency in using electrical design software and tools for simulations and schematics.- Good problem-solving skills with the ability to think critically and analyze complex situations.- Excellent communication and teamwork skills to collaborate effectively with colleagues and clients.- A proactive attitude with a willingness to learn and adapt to new challenges in a fast-paced environment. Candidates should be male, as specified, and ready to work in an office setting.

We are looking for a skilled Mobile Repair Technician to work on a commission basis at our shop in Rohini Sector 7, Delhi. Work Includes:Mobile repairing (Android & iPhone)Screen, battery, charging port replacementSoftware troubleshooting & unlockingDiagnosing customer issues Earnings (Commission Based):Attractive commission on each repair/jobIncome depends on your work & skills (good earning potential)

CCTV installationTroubleshootingCCTV configurationAccess control systemsCabling NetworkingTechnical supportConfiguration ip & non ip cctvVDP, Bio MetricCustomer serviceKnowledge of cctv cameras

We required cctv camera technician, biometric installation,ip camera,hd camera installation, video door phone, electric lock installation.

We are looking for a skilled Computer & Printer Hardware Engineer responsible for diagnosing, repairing, and maintaining desktops, laptops, printers, and related peripherals. The ideal candidate should have strong troubleshooting skills, technical knowledge of hardware components, and the ability to provide onsite and in-shop support. Key ResponsibilitiesDiagnose and repair desktop, laptop, and printer hardware issuesInstall, configure, and upgrade hardware componentsTroubleshoot laser printers, inkjet printers, barcode printers, and thermal printersPerform chip-level or board-level repair (if required)Install operating systems, drivers, and softwareNetwork printer setup and sharing configurationPreventive maintenance and servicing of devicesMaintain service reports and job recordsProvide customer support and technical guidance Required Skills & QualificationsDiploma/ITI/Bachelors in Computer Hardware, IT, or related fieldKnowledge of printer mechanisms (HP, Canon, Epson, Brother, etc.)Understanding of motherboard, SMPS, RAM, SSD/HDD installationBasic networking knowledge (LAN, IP setup)Ability to use diagnostic tools and multimetersGood communication and customer handling skills Preferred Skills (Optional)Experience with thermal or POS printersKnowledge of CCTV or networking devicesField service experienceAbility to handle multiple repair tasks efficiently

An HVAC Design Engineering Trainer is responsible for teaching, guiding, and mentoring students or working professionals in the principles, tools, and practices of HVAC (Heating, Ventilation Air Conditioning) design. The trainer delivers structured training using real-world examples, practical exercises, and industry-standard software to prepare learners for careers in HVAC design Trainer.Core Skills & CompetenciesStrong technical knowledge of HVAC systems principles, design standards, and calculations.Excellent command of HVAC design tools/software (AutoCAD, Revit, HAP.).Ability to explain complex engineering concepts in a clear, structured.Ability to design labs, assignments, and project-based exercises.Problem-solving mindset and mentoring attitude.

On site field service travelling all over India customer care and engineering application electrical & instrumentation

Perform electrical maintenance of machines and panels Identify and resolve electrical breakdowns Carry out preventive maintenance activities Handle wiring, installations, and fault finding Ensure compliance with electrical safety standards Maintain maintenance records and reportsGroup aur Channel se judne ka link yahan diya gaya hai:Channel Link: https://whatsapp.com/channel/0029VbBgDovD38CVpfHilM0WGroup Link: https://chat.whatsapp.com/FW81oSQuiTu3nZG8gZ95Ke

Service Engineer is primarily responsible for installing, maintaining, and repairing equipment, machinery, or systems. Specifically, their work involves the installation of transformers and switchgear, as well as conducting preventative maintenance and repairs to ensure maximum equipment uptime. Additionally, the Service Engineer is responsible for tracking maintenance records to monitor the health and performance of the equipment.Key Responsibilities:1. Involving in the initial installation of equipment or systems at a client-s site. This includes setting up, configuring, and ensuring that the equipment installed and operates according to specifications.2. Handling customer complaints and allocating manpower to resolve issues promptly, especially for AMC clients.3. Tracking the warranty and non-warranty complaints of transformers and switchgears.4. Ensure proper tracking of AMC customers and adherence to quarterly and half-yearly service schedules.5. Performing routine maintenance checks to prevent equipment breakdowns, ensuring everything operates smoothly. This involves tests, cleaning, adjusting, or replacing parts before they fail.6. Ensure proper tracking of AMC customers and adherence to quarterly and half-yearly service schedules.7. When equipment malfunctions, service engineers need to diagnose the problem quickly perform necessary tests or repairs or replace the part if necessary.8. Respond to customer complaints quickly and allocate manpower or attend by own to resolve issues promptly.9. Directly interaction with customers, explaining technical details, offering solutions, and providing training on how to use and maintain the equipment properly.10. Prepare detailed service reports documenting issues, solutions provided, and any recommendations for future actions.11. Service engineers often provide feedback to product development teams based on their field experience, helping to improve future products.12. Service engineers ensuring that critical equipment and systems function properly, minimizing downtime, and maximizing efficiency.Education and Experience Requirements.Education: Diploma in Electrical is required.Experience: A minimum of 2-3 years of professional experience, with at least 1 years in a service engineer role. Experience in managing teams and resources is essential. The candidate should have a proven track record of meeting deadlines and improving team performance.Industry Experience: Transformer & Switchgear service experience or in the industry relevant to the role is often required.Certifications: Electrical supervisor license is mandatory.Skills: Strong leadership, communication, and problem-solving skills are essential. The ability to motivate and mentor team members, manage conflicts, and lead through change is crucial.Work Experience:1. Experience in transformer and OLTC operations, including preventive maintenance, handling breakdowns, and managing parallel operations of transformers.2. Skilled in locating and rectifying all types of HV & LV panels and cable faults, including performing HV & LV cable joint sand terminations.3. Proficient in working with High- and low-tension switchgear such as VCB, SF6, RMU LBS, ACB, MCB, ELCB, MCCB, MOCB, OCB, VCB, and RCCB.4. Experienced in testing all types of electrical equipment-s, Protection and auxiliary relay-s and proficient in using electrical instruments like Megger, Hi-Pot test kit CRM, Time interval, Single -three phase relay test kit, Multimeter, earth tester, and phase sequence meter etc,5. Extensive knowledge of safety procedures and operations in the electrical field.6. Extensive knowledge of type of work permit and related compliance.Reporting StructureReporting to: Team LeaderResponsible for day-to-day tasks, field service operations, troubleshooting, maintenance, and customer interactions.Performance Metrics:Complaints: [e.g., nos of complaints attended for the week / month VS actual registered complaints]Execution plan: [e.g., Plan v/s actual achievement)Travel expenses and services: Have to submit the travel expenses and service reports immediately after completion of the work.Customer Satisfaction: [e.g., Customer feedback]

Job Title: Electrical Engineer (Billing & Site Execution)Experience Required: Minimum 3 YearsIndustry: Electrical / MEP Construction (Contractor Firm)Employment Type: Full-timeJob DescriptionWe are seeking an experienced Electrical Engineer to manage electrical site execution and billing activities for ongoing construction projects. The candidate should have strong hands-on knowledge of electrical installations, quantity measurement, and preparation of bills as per drawings and specifications.Key ResponsibilitiesElectrical Site Execution- Supervise electrical works at site including wiring, conduits, panels, lighting, earthing, and power systems- Ensure electrical work is executed as per approved drawings, specifications, and safety standards- Coordinate with civil team, MEP teams, contractors, and labour- Inspect material quality and ensure proper installation practices- Prepare daily site progress reportsBilling & Quantity Measurement- Prepare RA bills, final bills, and subcontractor bills for electrical works- Take site measurements and prepare BOQs and quantity abstracts- Verify quantities as per drawings and actual site execution- Maintain measurement books, billing files, and supporting documents- Coordinate with accounts and management for bill submission and approvalsPlanning & Coordination- Assist in electrical work planning and execution schedules- Identify site issues, clashes, or delays and propose solutions- Coordinate with consultants, clients, and vendors when requiredRequired Skills & Qualifications- Diploma / B.E. / B.Tech in Electrical Engineering- Minimum 3 years of experience in an electrical contractor firm- Strong knowledge of electrical site execution and billing- Experience in residential / commercial / mixed-use projects- Proficiency in AutoCAD, MS Excel, and MS Office- Knowledge of BOQs, drawings, specifications, and electrical standards- Ability to manage both site work and office billing responsibilitiesPreferred Candidate Profile- MEP coordination experience is an advantage- Practical, site-oriented approach- Capable of working independently under deadlines- Strong coordination and documentation skillsSalary- As per experience and industry standards

operate and maintain tool room machinery with a strong focus on grinding machines (surface, cylindrical, and tool & cutter grinding).Carry out precision machining for tools, dies, jigs, and fixtures as per design and production requirements.Read and interpret engineering drawings, blueprints, and job orders to determine machining requirements.Ensure proper tool setting, alignment, and inspection before starting operations.Perform preventive maintenance and minor troubleshooting of grinding machines.Maintain tool quality standards by ensuring dimensional accuracy and surface finish.Handle measuring instruments (Vernier, Micrometer, Height Gauge, Profile Projector, etc.) for inspection of tools.Ensure adherence to safety and quality standards in tool room operations.Support production teams by supplying accurate and timely tools for manufacturing.If you interested, Share me your CV.9310557817capitalplacement@21gmail.com

Handling Cylindrical Grinding machinePrecision work knowledgelathe machine KnowledgeQuality InstrumentalistsOverseas Travel for client sites on regular basismachinist

- Set up and operate VMC machines: Responsible for setting up and operating Vertical Machining Center (VMC) machines to perform various machining operations.- Read and interpret blueprints: Ability to read and interpret engineering drawings, blueprints, and specifications to understand the requirements of the job.- Monitor machine operations: Monitor the VMC machine operations to ensure they are running efficiently and producing quality parts within specified tolerances.- Inspect finished parts: Inspect the finished machined parts using precision measuring instruments to ensure they meet quality standards.- Perform routine maintenance: Perform routine maintenance tasks on the VMC machines to ensure they are in good working condition and to prevent breakdowns.Skills and Expectations:- Proficiency in operating VMC machines.- Familiarity with reading and interpreting engineering drawings.- Knowledge of precision measuring instruments.- Strong attention to detail and quality standards.- Ability to perform routine maintenance tasks on machines.- Good communication skills to work effectively with supervisors and colleagues.

Service Engineer is primarily responsible for installing, maintaining, and repairing equipment, machinery, or systems. Specifically, their work involves the installation of transformers and switchgear, as well as conducting preventative maintenance and repairs to ensure maximum equipment uptime. Additionally, the Service Engineer is responsible for tracking maintenance records to monitor the health and performance of the equipment.Key Responsibilities:1. Involving in the initial installation of equipment or systems at a clients site. This includes setting up, configuring, and ensuring that the equipment installed and operates according to specifications.2. Handling customer complaints and allocating manpower to resolve issues promptly, especially for AMC clients.3. Tracking the warranty and non-warranty complaints of transformers and switchgears.4. Ensure proper tracking of AMC customers and adherence to quarterly and half-yearly service schedules.5. Performing routine maintenance checks to prevent equipment breakdowns, ensuring everything operates smoothly. This involves tests, cleaning, adjusting, or replacing parts before they fail.6. Ensure proper tracking of AMC customers and adherence to quarterly and half-yearly service schedules.7. When equipment malfunctions, service engineers need to diagnose the problem quickly perform necessary tests or repairs or replace the part if necessary.8. Respond to customer complaints quickly and allocate manpower or attend by own to resolve issues promptly.9. Directly interaction with customers, explaining technical details, offering solutions, and providing training on how to use and maintain the equipment properly.10. Prepare detailed service reports documenting issues, solutions provided, and any recommendations for future actions.11. Service engineers often provide feedback to product development teams based on their field experience, helping to improve future products.12. Service engineers ensuring that critical equipment and systems function properly, minimizing downtime, and maximizing efficiency.Education and Experience Requirements.Education: Diploma in Electrical is required.Experience: A minimum of 2-3 years of professional experience, with at least 1 years in a service engineer role. Experience in managing teams and resources is essential. The candidate should have a proven track record of meeting deadlines and improving team performance.Industry Experience: Transformer & Switchgear service experience or in the industry relevant to the role is often required.Certifications: Electrical supervisor license is mandatory.Skills: Strong leadership, communication, and problem-solving skills are essential. The ability to motivate and mentor team members, manage conflicts, and lead through change is crucial.Work Experience:1. Experience in transformer and OLTC operations, including preventive maintenance, handling breakdowns, and managing parallel operations of transformers.2. Skilled in locating and rectifying all types of HV & LV panels and cable faults, including performing HV & LV cable joint sand terminations.3. Proficient in working with High- and low-tension switchgear such as VCB, SF6, RMU LBS, ACB, MCB, ELCB, MCCB, MOCB, OCB, VCB, and RCCB.4. Experienced in testing all types of electrical equipments, Protection and auxiliary relays and proficient in using electrical instruments like Megger, Hi-Pot test kit CRM, Time interval, Single -three phase relay test kit, Multimeter, earth tester, and phase sequence meter etc,5. Extensive knowledge of safety procedures and operations in the electrical field.6. Extensive knowledge of type of work permit and related compliance.Reporting StructureReporting to: Team LeaderResponsible for day-to-day tasks, field service operations, troubleshooting, maintenance, and customer interactions.Performance Metrics: Complaints: [e.g., nos of complaints attended for the week / month VS actual registered complaints] Execution plan: [e.g., Plan v/s actual achievement) Travel expenses and services: Have to submit the travel expenses and service reports immediately after completion of the work. Customer Satisfaction: [e.g., Customer feedback]Challenges and Solutions:Challenges:Service engineers often deal with complex machinery or systems that require deep technical knowledge and troubleshooting skills.Balancing multiple service calls, handling emergencies, and meeting tight deadlines can be overwhelming.Customers often expect quick resolutions and may not understand the technical constraints, leading to dissatisfaction.Service engineers often need to travel to different locations, which can be exhausting and time-consuming, especially in remote areas.Working in hazardous environments or with dangerous equipment poses significant safety risks.Keeping up with and accurately documenting service activities, issues, and resolutions can be time-consuming but is essential for future reference.Lack of necessary parts during service calls can lead to delays in fixing issues Miscommunication between the service engineer, customers, and the support team can lead to inefficiencies and errors.Solutions:Continuous training and certification programs to keep engineers up-to-date with the latest technologies and systems. Access to a comprehensive knowledge base or a team of experts for consultation can also be beneficial.Clear communication and setting realistic expectations with customers is key. Providing regular updates and explaining the process can help manage customer expectations.Optimizing travel routes, providing reliable transportation, and ensuring that engineers / technicians have all necessary tools and parts before leaving for a job can reduce travel- related stress.Comprehensive safety training, regular drills, and ensuring all safety protocols and personal protective equipment (PPE) are in place and used correctly. Conducting regular safety audits can also prevent accidents.Utilizing digital tools and apps that simplify the documentation process and allow for quick entry of service reports can streamline this task.Establishing a robust inventory management system and ensuring that commonly used parts are readily available can minimize delays. Partnering with suppliers for quick delivery of rare parts is also beneficial.Work Environment and Conditions:Work Environment: The Service Engineer role is typically based on-site and office for specific time. However, the position is hybrid work options, allowing for a combination of remote and in-office work depending on the job needs.Travel Requirements: The traveling primarily for installing, maintaining, and repairing equipment, machinery, or systems. Travel is generally expected to be within the region but could occasionally extend to other locations depending on work demands.Work Hours: Standard working hours are from 9 AM to 6 PM, Monday through Saturday, but flexibility may be required to meet work deadlines, including occasional evenings or weekends.