SCADA Jobs

Candidates with experience in Sealed Quench, Gas Nitriding, Endo Gas Generation, Carburizing, Carbonitriding,SCADA-based furnace control, and LPG handling will be preferred.strong practical exposure to heat treatment operations in an automotive/component manufacturing environment, with hands-on experience in furnace operation, process control, troubleshooting,manpower handling, and quality compliance.

Fault finding, inverter troubleshooting, preventive and breakdown maintenance, solar plant monitoring, DC/AC system troubleshooting, electrical testing, performance monitoring, generation improvement, coordination with OEMs and preparation of service/maintenance reports

Reporting to the Engineering Manager, Automation Engineer is responsible for: Designing automation scripts and finding solutions for automation problems Committed to developing skills to provide up-to-date solutions. Knowing & working with latest software stacks and test automation frameworks Cost effective operation and maintenance. Ensure efficient and effective engineering practices. Efficient liaison and coordination with all stakeholders Ensure implementation of departmental strategies and policies in compliance with HSE. Key Responsibilities:Departmental Goals: To ensure strict compliance of company policies and procedures. To provide efficient attractive and easy working environment to people. To improve continuously efficiency of automation operations in terms of cost and output. To keep all facility in good working conditions within energy consumption and environmental standards. Effective management of available resource to deliver time effective services up to end user. Maintaining good relations with all suppliers, vendors and facilitating them according to the company policy Functional Responsibilities of the Job: Primary Responsibilities: Monitor the field instruments and do the calibration as per plan schedule or as per the request of operation team in case of any issue or deviation. Maintain the record of calibrated instruments monthly wise as per schedule plan Provide the calibration information while audit time. Closely monitor and responsible the SERVER station to ensure the system are working fine as per standard and requirement Responsible for the network topology between Server, PLC & SCADA. To provide cross functional support (MTC team, Production & Quality) as & when needed. To maintain database up to date. Upload the PLC and HMI backup program yearly basis & communicate with machine supplier for master program. Help the quality and production team to find out the root cause of production contamination or losses with the help of MIS report, Object trending and items alarming history. Programming (Parameter setting) and troubleshooting variable frequency drives. Coordinate/Participate with project team to ensure the new installation is functioning & designed as per our standard. To ensure all the safety interlocks (Food Safety) are works fine while the commissioning and testing time. Make the proper plan for shutdown with production and quality team if required. Provide technical confirmation before placing the order to technical store. Take Purchase Queries & Follow up of Ordered Material. Review the store file yearly and suggest stopping to reorder the items which machine are not in use or obsolete, to minimize the store value. Familiar with shutdown jobs, shift routine jobs, Calibration, Servicing, Troubleshooting & Loop checking. Responsible for smooth operation of processing plants, modifications, improvements. Familiar with Control, maintain/Optimization the ROL (Re-Order Level) of critical spare parts. Effective knowledge of first line. troubleshooting, preventive (PM), corrective and breakdown maintenance on Instrument & Control System. Troubleshooting & Programming experience in various kinds of PLCS (SIEMENS & Allen Bradley) In depth knowledge of SCADA, PLC and HMI Configuration and equipment specification. Familiar with PLC programing standards Support the provision of the work environment to team members, by issuing proper material, tools, and safety equipments. Co-ordination all maintenance activities of installed equipment including the weekly, monthly, and yearly plans. Strong fault-finding experience on different Automation Networks like Ethernet, Profibus, Profinet, Device Net, Control Net, Fiber Optic & Asi Networks. Strong knowledge of Maintenance & troubleshooting of HART & SMART protocol transmitters of ROSEMOUNT, SIEMENS, E+H, ABB, ALLEN BRADELY, DANFOSS Familiar with reading Electrical control wiring diagram and loop checking of entire field instruments, Control valves, Control system & Motors. Effective knowledge of the Lock Out Tag Out Processes Working with SAP for PM, Material Ordering and Requesting, Calibration report & for closing work order/Notification. Secondary Responsibilities Design systems for new, or modify existing, automated machinery to automate manufacturing processes. Design and specify some electrical components for custom automated industrial machines Plan and supervise maintenance jobs and manage spares inventories either at plant or through 3rd parties or OEMs. Establish technical manuals, drawings, models, training documentation, preventative maintenance plans and troubleshooting guides for newly established automated equipment/processes Manage individual project budgets and schedules and routinely report progress Ability to self-direct on projects and tasks and the ability to manage a team Administrative Responsibilities of the job: Issuing work permits for specific jobs in specific areas with clear instructions of safety, hygiene, and health Record keeping of M & R data. Record keeping of logbooks. Be administratively responsible for conduct of his direct reporting employees. Take necessary action in case of violation of rules and code of conduct including issuance of warning letter where required RELATED JOB REQUIREMENTS/ QUALIFICATIONS4+ years of relevant Automation experience. PLC technical certification In-depth knowledge of manufacturing and mechanical processes Knowledge of software design principals Detailed knowledge of PLC automation software and coding languages Ability to work with minimal supervision Experience with PLC S7-1500, S7-400 Experience in PLC Programming language STL, SCL, LL Experience in HMI Programming Ability to coordinate with outside suppliers Mechanically inclined, strong problem-solving skills, hands-on individual Excellent oral and written communication skills.

We are looking for a technically strong and commercially driven Sales Engineer to identify business opportunities, engage industrial customers, and promote automation, IoT, and industrial communication solutions. The role involves technical sales, customer relationship management, solution selling, and achieving sales targets.Key Responsibilities:Generate new business opportunities through customer visits, networking, OEMs, dealers, and system integratorsUnderstand customer requirements and recommend suitable automation, IoT, and industrial solutionsConduct product presentations, demonstrations, and coordinate with technical teams for solution implementationFollow up on enquiries, quotations, payments, and maintain strong customer relationshipsPrepare proposals, maintain CRM records, and monitor sales pipeline and performance metricsAchieve sales targets while supporting project execution and customer satisfactionRequired Skills & Qualifications:Diploma/BE/B.Tech in Electronics & Communication, Electrical & Electronics, Instrumentation, Mechatronics, Automation, or related engineering disciplines1-5 years of experience in industrial automation, electrical/electronics product sales, IoT, or technical support (Freshers with strong technical aptitude may also apply)Basic knowledge of PLC, SCADA, Sensors, Modbus, Ethernet, IoT, and Industry 4.0 conceptsStrong communication, presentation, negotiation, and customer handling skillsProficiency in MS Office and CRM tools preferred

We are looking for a skilled DCS Operator to manage and control processes in our facility located in Albania. The ideal candidate will have 5 to 7 years of experience in a similar role.**Key Responsibilities:**- **Monitor Control Systems**: Regularly check and operate Distributed Control Systems (DCS) to ensure optimal functioning of production processes.- **Troubleshoot Issues**: Identify and resolve any process-related issues quickly to minimize production downtime and maintain efficiency.- **Record Data**: Maintain accurate logs of plant operations, including any anomalies, to assist with future analysis and reporting.- **Coordinate with Teams**: Collaborate with engineering and maintenance teams to implement changes and ensure seamless operations.- **Adhere to Safety Protocols**: Follow all safety guidelines to create a safe working environment for all employees.**Required Skills and Expectations:**Candidates should possess a degree or diploma in a relevant field, along with strong technical knowledge of DCS systems. Proficiency in computer applications and an understanding of process automation are essential. We expect the ideal candidate to be detail-oriented and able to work under pressure while maintaining high standards. Strong communication and teamwork skills are critical, as you will need to coordinate effectively with various departments. Flexibility to work in shifts and an ability to adapt to changing work conditions are also important traits for this role.

Maintain HT/LT panels, transformers, switchgear, motors, VFDs, MCCs, PCCs, and DG sets.Troubleshoot and maintain PLC, SCADA, HMI, and DCS systems.Maintain control valves, analyzers, sensors automation

We are seeking a skilled PLC Engineer with 2 to 3 years of experience to join our team in Ghaziabad, India. The ideal candidate will have an I.T.I. qualification and a strong understanding of programmable logic controllers.Key Responsibilities:- **PLC Programming**: Design, develop, and implement PLC programs for various automation projects to ensure efficient operation of machinery and processes.- **Troubleshooting**: Identify, diagnose, and resolve issues related to PLC systems and equipment to minimize downtime and maintain production efficiency.- **System Integration**: Collaborate with other engineering teams to integrate PLC systems with existing machinery and software for seamless operation.- **Documentation**: Maintain accurate project documentation, including flowcharts, wiring diagrams, and programming manuals to ensure compliance and ease of future troubleshooting.- **Testing and Commissioning**: Conduct tests and evaluations of PLC systems to verify their functionality and performance, making necessary adjustments as required.Required Skills and Expectations:The successful candidate must possess strong analytical and problem-solving skills, with a thorough understanding of electrical circuits and automation processes. Proficiency in programming languages such as Ladder Logic and familiarity with HMI (Human-Machine Interface) systems is essential. The candidate should demonstrate good communication skills and be able to work collaboratively with different teams while maintaining a strong focus on safety and quality standards. A commitment to continuous learning and improvement in the field of automation technology is also expected.

Reporting Send to HOD maintenance and utility manager.Maintenance of Electrical panel control & Power CkT.Installation of Electrical Measuring Device for measure the Electrical Quantity.Installation the Electrical protective device to protect the Electrical Equipment.Maintenance and installation the motors & motors starters Dol& star delta starter, electrical fan, lights,Maintenance of the DG set 1250 kva, 625 kva ,1010 kva .Make the schedule, log book & planning of preventive maintenance of electrical equipment.Electrical maintenance in ccm machines continue compress machine. compressor Like as GA 37,GA 90, GA 55+ and GA 55 water and air cool compressor . With air dryer .and chillers works Maintenance of transformer 3000 kva , 33kv to 415 volt . Maintained power factor and control wiring systems knowledge. Make daily power consumption reports and daily breakdown reports .All vfd program upload and download and repair work .working with vfd Abb ,danfoss,allen Bradley ,yaskawa, Omron, delta, Fuji,etc.HMI ,drive ,smps , etc. Electronic equipment normal repair work knowledge. Ammonia screws Compressor, Allen Bradley soft starter, plc Allen Bradley 1400,seimens Equipment trouble shooting with scada. plc must

Key Responsibilities: Design and develop PLC programs using platforms such as Siemens, Allen-Bradley, Mitsubishi, Schneider Electric, etc. Create and modify HMI (Human-Machine Interface) applications for enhanced user interaction. Integrate PLCs with other devices like sensors, actuators, and SCADA systems. Troubleshoot and optimize control systems to ensure efficiency and reliability. Conduct debugging, testing, and commissioning of automation systems on-site or remotely. Perform regular maintenance, updates, and troubleshooting of existing control systems. Prepare detailed documentation for PLC code, wiring diagrams, system architecture, and user manuals. Maintain a record of program revisions and ensure version control. Coordinate with cross-functional teams to understand project requirements and provide technical expertise. Train and mentor junior programmers and technicians in PLC programming and troubleshooting.

As an Automation Project Engineer, you will be responsible for designing, implementing, and maintaining automation projects. You will work closely with teams to ensure efficient processes and systems. You will have the opportunity to learn and grow in a dynamic environment, applying your engineering knowledge to real-life projects.**Key Responsibilities:**- **Project Design and Development:** Collaborate with team members to design automation systems tailored to specific project requirements. This includes creating detailed project plans and timelines.- **System Installation and Configuration:** Assist in the installation of automation systems, ensuring they are set up correctly and function as intended. You will also configure systems to meet operational needs.- **Testing and Quality Assurance:** Conduct tests on the automation systems to verify their performance and reliability. You will analyze results and make necessary adjustments for optimization.- **Technical Support and Troubleshooting:** Provide ongoing support for installed systems, identifying and resolving issues as they arise to minimize downtime for users.- **Documentation:** Maintain comprehensive documentation of project processes, system configurations, and troubleshooting steps for future reference.**Required Skills and Expectations:**You should hold a Bachelors degree in Engineering (B.E.) and have a keen interest in automation technologies. Strong analytical and problem-solving skills are essential. You should possess good communication abilities to work effectively in a team and convey technical information clearly. A willingness to learn and adapt to new technologies is important. As the position is open to freshers, initiative and enthusiasm in applying engineering principles will be valued.

Job DescriptionConfiguration & Programming of wireless data modems for IoTNOC based support to field engineering teamSystem provisioning on ERPMIS generationTesting & DebuggingImpart technical trainingResolve Technical QueriesEnsure ticket resolution within TATDesired Candidate ProfileB.Tech/Diploma in Computers, E&CAbove 75% in Class XIIExcellent CommunicationExcellent IT skills, Excel, Word, AndroidTeam playerCalm, mature & able to handle difficult situationsHigh EnergySelf Motivated

Role Description- Design system architecture- Program PLCs (we work on different stuff, so be ready for that but mostly it will be Siemens) - SCADA design & development - Can cut wires and put them in place, if needed - Read electrical drawings, P&IDs, programs written by other people, and everything else that a programmer needs to - Open to reading 1000 different manuals and making things works - Writing programs from scratch to troubleshooting running machines Qualifications- Degree: Doesnt matter, dont care - Experience: Minimum 3 years of doing all the above will probably qualify you to clear the interview but if youre someone who learnt it all in just 6 months, fine by us! - Skills: Everything that lets you do jobs written above

Strong knowledge of PLC programming & troubleshootingExperience in industrial automation systemsUnderstanding of control panels, sensors, and instrumentationAbility to handle installation, commissioning & maintenance workWillingness to travel for site support

Key Responsibilities:1. Design and develop industrial automation systems: In this role, you will be responsible for designing and developing automation systems for industrial processes, ensuring efficiency and reliability.2. Program PLCs and HMIs: You will be required to program Programmable Logic Controllers (PLCs) and Human Machine Interfaces (HMIs) to control various machinery and processes in industrial settings.3. Troubleshoot and maintain automation systems: You will need to troubleshoot any issues that arise with automation systems and perform regular maintenance to ensure optimal performance.4. Collaborate with cross-functional teams: As an Industrial Automation Engineer, you will work closely with other engineering teams, production teams, and technicians to integrate automation solutions and optimize processes.5. Stay updated on industry trends and technologies: You will be expected to keep yourself informed about the latest trends and technologies in industrial automation to enhance systems and processes continuously.Required Skills and Expectations:1. Bachelor's degree in Engineering, preferably in Electrical or Mechanical Engineering.2. Knowledge of PLC programming and HMI development.3. Strong problem-solving skills and the ability to troubleshoot technical issues.4. Good communication skills and the ability to work effectively in a team.5. Attention to detail and a proactive approach to work.6. Willingness to learn and adapt to new technologies in the field of industrial automation.

Innovic India Pvt. Ltd. is hiring for B.E/B.Tech/Diploma/ITI Fresher engineer/Electrical Engineer/Mechanical Engineer/Instrumentation & Control Engineer for Patna, Noida, Delhi NCR Location.We are seeking Fresher Electrical Engineer with Hands on Practical Training on Industrial Automation( PLC, SCADA, DCS, HMI, VFD, Instrumentation, Panel Designing, AutoCAD Designing etc...Interested candidate can contact us on +91-8882999066Email- bharti.innovic@gmail.comEmail- www.innovicindia.com

We are Looking Fresher Mechanical Engineer Who have Good Practical Knowledge of Industrial Automation Tools Like, Plc, Scada,Hmi, Vfd, Dcs. Panel Designing Etc..

We need 4 Engineers to work permanently at Saudi Arabia.Testing & Commissioning for MV & HV Switchgear, Relay and Control scheme , Numerical Protection Relays , troubleshooting for daily operation sub stations.Experience in maintaining protective Relays & Control equipment for 33-230 kV Substation Substations and Transmission Lines.Installation, calibration, adjustment and perform Preventive maintenance on protective relays, relaying schemes, control circuits, Power Line carrier, Fault recorders, Sequence of Event recorders and metering equipment in Power Plants and substations.Experience on Numerical, Static and Electro-Mechanical Relays for the protection of Lines, Transformers, Bus bars, and Breaker Back-up etc.Well experienced with schemes of Differential, Distance, O/C, E/F, directional, REF, Bus bar Differential, Breaker failure protections supplied by the ABB/AREVA/Siemens/GE etc.Perform maintenance of ABTS, PLC, Battery chargers and SCADA controls.Undertake more independent work concerned with commissioning of new protective equipment, troubleshooting of equipment tripping and analyzing test results.

Key ResponsibilitiesAssess customer needs, understand their process and refer to their specificationsMaintain highest level of customer satisfaction through respectful and cordial communication with the client, his representatives, and all members of the Qualtech teamParticipate in automation design estimates and quotesRespect Qualtech project management guidelines and protocolsProactively look for and recommend improvements in processes and proceduresCoordinate automation activities with the project managerMap the electrical requirements for the Electrical engineering teamDevelop a detailed project plans with the PMs to track project progress (cost, schedule)Support the design, engineering, and commissioning of new control systemsLadder PLC programming, mainly with Rockwell Software. Studio5000, CCW, RSLogix 5000 and 500.HMI programming Rockwell Software FactoryTalkView ME and SE.Diagnose the causes of failures, decide on corrective actions to be taken and ensure the repair of defective equipmentI/O verificationsEmergency service call supportRequirements:6+ years experience in process control automation design, PLC programming, field installation, performance testing, commissioning, troubleshooting and operation preferably in the Food and Beverage or Liquid Processing industriesSolid technical background, with understanding or hands-on experience with control loops and PID programmingAbility to adapt to the Qualtech programming standards for specific systems. Offer recommendations for optimization and improvements where identified.Experience with Wonderware HMI/SCADA/IIM suite of products is an assetKnowledge of and experience reading, analyzing P&IDs and electrical drawings

Job DescriptionConfiguration & Programming of wireless data modems for IoTNOC based support to field engineering teamSystem provisioning on ERPMIS generationTesting & DebuggingImpart technical trainingResolve Technical QueriesEnsure ticket resolution within TATDesired Candidate ProfileB.Tech/Diploma in Computers, E&CAbove 75% in Class XIIExcellent CommunicationExcellent IT skills, Excel, Word, AndroidTeam playerCalm, mature & able to handle difficult situationsHigh EnergySelf Motivated