Siemens PLC Jobs

Hiring: PLC Automation EngineerLocation: BangaloreExperience: 8-12 YearsIndustry: Industrial Automation / ManufacturingWe are looking for an experienced PLC Automation Engineer to design, develop, commission, and troubleshoot industrial automation systems for manufacturing and production environments.Key Responsibilities:Develop and program PLC-based automation systems.Configure and troubleshoot PLCs, HMIs, and SCADA systems.Integrate sensors, drives, servo systems, and industrial control equipment.Conduct system testing, commissioning, and on-site troubleshooting.Analyze automation faults and implement corrective actions.Coordinate with electrical, mechanical, and production teams.Prepare control logic, technical documentation, and commissioning reports.Key Skills: PLC Programming, Siemens PLC, Allen-Bradley, HMI, SCADA, Industrial Automation, VFD, Servo Drives, Control Systems, Electrical Troubleshooting, System Commissioning

Key ResponsibilitiesDesign, develop, and implement electrical systems, circuits, and control panels.Prepare electrical schematics, wiring diagrams, layouts, and technical documentation.Perform electrical calculations, load analysis, and system sizing.Conduct testing, commissioning, troubleshooting, and maintenance of electrical equipment.Coordinate with mechanical, production, quality, and project teams to ensure successful project completion.Ensure compliance with electrical codes, safety regulations, and industry standards.Assist in vendor evaluation, equipment selection, and technical procurement activities.Analyze and resolve electrical faults and system performance issues.Monitor project progress and provide technical support throughout the project lifecycle.Prepare project reports, maintenance records, and engineering documentation.

* Hands-on experience in PLC programming and industrial automation.* Experience with Mitsubishi, Delta, Siemens, and INOVANCE PLCs.* Hands-on experience in Servo Motor and Servo Drive projects.* Experience in AC Drives / VFDs, including configuration, commissioning, parameterization, and troubleshooting.* Experience in motion-control applications, including positioning, indexing, synchronization, and speed control.* Develop, modify, and troubleshoot PLC programs and machine sequences.* Experience in HMI programming, including alarms, recipes, parameters, counters, and diagnostics.* Hands-on experience integrating PLC, HMI, Servo Drives, AC Drives, sensors, encoders, and pneumatic systems.* Experience in PLC I/O configuration, testing, and troubleshooting.* Hands-on experience in machine commissioning, installation, trial runs, and production support.* Strong troubleshooting skills in PLC, Servo, VFD, HMI, sensors, and communication systems.* Knowledge of industrial communication protocols such as Modbus, Ethernet, CAN/CANopen, PROFINET, etc.* Ability to read and understand electrical control drawings and wiring diagrams.* Experience in new machine development, automation projects, and machine modifications.* Experience in servo tuning, drive parameter setting, homing, positioning, and fault diagnosis.* Knowledge of pneumatic systems, sensors, actuators, and control panels.* Experience in machine cycle-time optimization and productivity improvement.* Maintain PLC/HMI/Drive software backups and technical documentation.* Ability to work independently on commissioning, troubleshooting, and project execution.

We are looking for an Estimation Engineer to join our team in Chennai. The ideal candidate will have 1 to 7 years of experience and a diploma in a relevant field. This is a full-time position, and work will be conducted from our office.Key Responsibilities:- Prepare Cost Estimates: Analyze project specifications and prepare detailed cost estimates to ensure accurate budgeting for projects.- Analyze Blueprints and Drawings: Review project plans, blueprints, and drawings to identify materials and labor required, ensuring all aspects of the project are covered.- Coordinate with Stakeholders: Communicate with project managers, architects, and clients to gather information that is crucial for preparing precise estimates.- Evaluate Subcontractor Quotes: Collect and assess quotes from subcontractors and suppliers to ensure competitive pricing and adherence to project specifications.- Maintain Documentation: Organize and maintain all estimation documents and reports, ensuring they are up to date and accessible for future reference.- Assess Risks: Identify potential risks and issues related to costs and provide recommendations to mitigate these risks.Required Skills and Expectations:Candidates should have strong analytical skills, enabling them to make accurate assessments of project costs. Excellent communication skills are essential for effective collaboration with various stakeholders. Proficiency in estimation software and tools is expected, along with a solid understanding of construction methods, materials, and regulations. Attention to detail is crucial, as minor errors can lead to significant budget implications. The candidate should be able to work independently while also thriving in a team-oriented environment.

Reporting to the Engineering Manager, Automation Engineer is responsible for: Designing automation scripts and finding solutions for automation problems Committed to developing skills to provide up-to-date solutions. Knowing & working with latest software stacks and test automation frameworks Cost effective operation and maintenance. Ensure efficient and effective engineering practices. Efficient liaison and coordination with all stakeholders Ensure implementation of departmental strategies and policies in compliance with HSE. Key Responsibilities:Departmental Goals: To ensure strict compliance of company policies and procedures. To provide efficient attractive and easy working environment to people. To improve continuously efficiency of automation operations in terms of cost and output. To keep all facility in good working conditions within energy consumption and environmental standards. Effective management of available resource to deliver time effective services up to end user. Maintaining good relations with all suppliers, vendors and facilitating them according to the company policy Functional Responsibilities of the Job: Primary Responsibilities: Monitor the field instruments and do the calibration as per plan schedule or as per the request of operation team in case of any issue or deviation. Maintain the record of calibrated instruments monthly wise as per schedule plan Provide the calibration information while audit time. Closely monitor and responsible the SERVER station to ensure the system are working fine as per standard and requirement Responsible for the network topology between Server, PLC & SCADA. To provide cross functional support (MTC team, Production & Quality) as & when needed. To maintain database up to date. Upload the PLC and HMI backup program yearly basis & communicate with machine supplier for master program. Help the quality and production team to find out the root cause of production contamination or losses with the help of MIS report, Object trending and items alarming history. Programming (Parameter setting) and troubleshooting variable frequency drives. Coordinate/Participate with project team to ensure the new installation is functioning & designed as per our standard. To ensure all the safety interlocks (Food Safety) are works fine while the commissioning and testing time. Make the proper plan for shutdown with production and quality team if required. Provide technical confirmation before placing the order to technical store. Take Purchase Queries & Follow up of Ordered Material. Review the store file yearly and suggest stopping to reorder the items which machine are not in use or obsolete, to minimize the store value. Familiar with shutdown jobs, shift routine jobs, Calibration, Servicing, Troubleshooting & Loop checking. Responsible for smooth operation of processing plants, modifications, improvements. Familiar with Control, maintain/Optimization the ROL (Re-Order Level) of critical spare parts. Effective knowledge of first line. troubleshooting, preventive (PM), corrective and breakdown maintenance on Instrument & Control System. Troubleshooting & Programming experience in various kinds of PLCS (SIEMENS & Allen Bradley) In depth knowledge of SCADA, PLC and HMI Configuration and equipment specification. Familiar with PLC programing standards Support the provision of the work environment to team members, by issuing proper material, tools, and safety equipments. Co-ordination all maintenance activities of installed equipment including the weekly, monthly, and yearly plans. Strong fault-finding experience on different Automation Networks like Ethernet, Profibus, Profinet, Device Net, Control Net, Fiber Optic & Asi Networks. Strong knowledge of Maintenance & troubleshooting of HART & SMART protocol transmitters of ROSEMOUNT, SIEMENS, E+H, ABB, ALLEN BRADELY, DANFOSS Familiar with reading Electrical control wiring diagram and loop checking of entire field instruments, Control valves, Control system & Motors. Effective knowledge of the Lock Out Tag Out Processes Working with SAP for PM, Material Ordering and Requesting, Calibration report & for closing work order/Notification. Secondary Responsibilities Design systems for new, or modify existing, automated machinery to automate manufacturing processes. Design and specify some electrical components for custom automated industrial machines Plan and supervise maintenance jobs and manage spares inventories either at plant or through 3rd parties or OEMs. Establish technical manuals, drawings, models, training documentation, preventative maintenance plans and troubleshooting guides for newly established automated equipment/processes Manage individual project budgets and schedules and routinely report progress Ability to self-direct on projects and tasks and the ability to manage a team Administrative Responsibilities of the job: Issuing work permits for specific jobs in specific areas with clear instructions of safety, hygiene, and health Record keeping of M & R data. Record keeping of logbooks. Be administratively responsible for conduct of his direct reporting employees. Take necessary action in case of violation of rules and code of conduct including issuance of warning letter where required RELATED JOB REQUIREMENTS/ QUALIFICATIONS4+ years of relevant Automation experience. PLC technical certification In-depth knowledge of manufacturing and mechanical processes Knowledge of software design principals Detailed knowledge of PLC automation software and coding languages Ability to work with minimal supervision Experience with PLC S7-1500, S7-400 Experience in PLC Programming language STL, SCL, LL Experience in HMI Programming Ability to coordinate with outside suppliers Mechanically inclined, strong problem-solving skills, hands-on individual Excellent oral and written communication skills.

Designation :- Automation EngineerQualification:- Diploma Or BE/B.Tech In Mechanical Engineering Experience :- 3 Years To 4 Years Salary:-As Per Interview Gender:- MaleKey Responsibilities:- 1. Develop, modify, and troubleshoot PLC, HMI, and SCADA programs.2. Diagnose automation system faults and restore machine functionality.3. Work on servo drives, VFDs, sensors, and control panel wiring.4. Support automation upgrades and new machine commissioning.5. Ensure system safety and compliance with automation standards.6. Perform preventive maintenance on automation systems.7. Coordinate with production teams to improve cycle time and process efficiency.8. Maintain documentation of programs, backups, and wiring diagrams.Job Location:- Palghar, Maharashtra Industry:- Reputed Manufacturing Industry

Develop and modify PLC and HMI programs for SPMs.Commission, test, and troubleshoot automation systems.Integrate PLCs with servo drives, VFDs, sensors, pneumatic, and hydraulic systems.Diagnose and resolve machine control and electrical issues.Coordinate with mechanical, electrical, and production teams during machine development.Support machine installation, customer training, and after-sales service when required.Prepare technical documentation and software backups.

Electrical Engineer1 Opening Full-Time On-SiteQualification: Diploma / Degree in Electrical EngineeringExperience: 5+ Years in Industrial Automation, PLC & Electrical Systems (No Freshers)About the RoleAs an Electrical Engineer, you will be the primary technical authority for all electrical systems, automation infrastructure, and PLC operations within the plant. You will drive reliability, safety, and efficiency across all electrical assets while supporting production continuity.Key ResponsibilitiesOversee and manage all plant electrical systems including LT panels, MCC, power distribution, and earthingDiagnose and rectify electrical breakdowns promptly to ensure minimal production downtimeMaintain and service motors, control panels, contactors, sensors, relays, and field instrumentsMonitor, maintain, and update PLC programs and SCADA/HMI configurations as neededDevelop, implement, and execute preventive maintenance (PM) schedules for all electrical assetsEnsure full compliance with electrical safety standards, IS codes, and factory regulationsEvaluate new automation technologies and propose system upgrades to improve plant efficiencyPrepare and maintain technical documentation including single-line diagrams, PM logs, and inspection reportsTrain and guide electrical technicians and helpers in safe work practices and equipment handling

Reporting Send to HOD maintenance and utility manager.Maintenance of Electrical panel control & Power CkT.Installation of Electrical Measuring Device for measure the Electrical Quantity.Installation the Electrical protective device to protect the Electrical Equipment.Maintenance and installation the motors & motors starters Dol& star delta starter, electrical fan, lights,Maintenance of the DG set 1250 kva, 625 kva ,1010 kva .Make the schedule, log book & planning of preventive maintenance of electrical equipment.Electrical maintenance in ccm machines continue compress machine. compressor Like as GA 37,GA 90, GA 55+ and GA 55 water and air cool compressor . With air dryer .and chillers works Maintenance of transformer 3000 kva , 33kv to 415 volt . Maintained power factor and control wiring systems knowledge. Make daily power consumption reports and daily breakdown reports .All vfd program upload and download and repair work .working with vfd Abb ,danfoss,allen Bradley ,yaskawa, Omron, delta, Fuji,etc.HMI ,drive ,smps , etc. Electronic equipment normal repair work knowledge. Ammonia screws Compressor, Allen Bradley soft starter, plc Allen Bradley 1400,seimens Equipment trouble shooting with scada. plc must

Key Responsibilities: Design and develop PLC programs using platforms such as Siemens, Allen-Bradley, Mitsubishi, Schneider Electric, etc. Create and modify HMI (Human-Machine Interface) applications for enhanced user interaction. Integrate PLCs with other devices like sensors, actuators, and SCADA systems. Troubleshoot and optimize control systems to ensure efficiency and reliability. Conduct debugging, testing, and commissioning of automation systems on-site or remotely. Perform regular maintenance, updates, and troubleshooting of existing control systems. Prepare detailed documentation for PLC code, wiring diagrams, system architecture, and user manuals. Maintain a record of program revisions and ensure version control. Coordinate with cross-functional teams to understand project requirements and provide technical expertise. Train and mentor junior programmers and technicians in PLC programming and troubleshooting.

As an Automation Project Engineer, you will be responsible for designing, implementing, and maintaining automation projects. You will work closely with teams to ensure efficient processes and systems. You will have the opportunity to learn and grow in a dynamic environment, applying your engineering knowledge to real-life projects.Key Responsibilities:- Project Design and Development: Collaborate with team members to design automation systems tailored to specific project requirements. This includes creating detailed project plans and timelines.- System Installation and Configuration: Assist in the installation of automation systems, ensuring they are set up correctly and function as intended. You will also configure systems to meet operational needs.- Testing and Quality Assurance: Conduct tests on the automation systems to verify their performance and reliability. You will analyze results and make necessary adjustments for optimization.- Technical Support and Troubleshooting: Provide ongoing support for installed systems, identifying and resolving issues as they arise to minimize downtime for users.- Documentation: Maintain comprehensive documentation of project processes, system configurations, and troubleshooting steps for future reference.Required Skills and Expectations:You should hold a Bachelors degree in Engineering (B.E.) and have a keen interest in automation technologies. Strong analytical and problem-solving skills are essential. You should possess good communication abilities to work effectively in a team and convey technical information clearly. A willingness to learn and adapt to new technologies is important. As the position is open to freshers, initiative and enthusiasm in applying engineering principles will be valued.

Role Description- Design system architecture- Program PLCs (we work on different stuff, so be ready for that but mostly it will be Siemens) - SCADA design & development - Can cut wires and put them in place, if needed - Read electrical drawings, P&IDs, programs written by other people, and everything else that a programmer needs to - Open to reading 1000 different manuals and making things works - Writing programs from scratch to troubleshooting running machines Qualifications- Degree: Doesnt matter, dont care - Experience: Minimum 3 years of doing all the above will probably qualify you to clear the interview but if youre someone who learnt it all in just 6 months, fine by us! - Skills: Everything that lets you do jobs written above

URGENT HIRING - ELECTRICAL ENGINEERS FOR SAUDI ARABIA !!!We are hiring experienced Electrical Engineers for a reputed company in Saudi Arabia. Applications invited from suitable candidatesSalary:3000 - 4000 SAR(Approx. 75,000 - 1,00,000 per month)Eligibility:-----------*Only Saudi-return Electrical Engineers from Tamil Nadu & Kerala*Diploma / BE in Electrical Engineering*Minimum 2 years of Saudi experienceJob Benefits:---------------*8-hour duty + 1 day weekly off*Free accommodation & transportation*Other benefits as per Saudi Labour Law*2-year renewable contract*Age limit: Below 45 yearsSelection Process:Online Interview (Zoom)To Apply share CV to, +91 7402166371 or srcareercv1@gmail.com

Plc Programming, Scada Development, Hmi Programming, Installation & Commissioning

Experience with Rockwell, Siemens and ABB make PLC and SCADA and to be conversant with Ladder, Function Block Diagram and Structured Text Languages. Preference will be given to work experience with Water Treatment and OEMs.

We are looking for a skilled Electrical Engineer with 5 to 6 years of experience to join our team in Pune, India. The successful candidate will be responsible for designing, developing, and maintaining electrical systems and components.Key Responsibilities:1. System Design and Development: Create and develop detailed electrical designs for various projects, ensuring they meet industry standards and client requirements.2. Troubleshooting and Maintenance: Diagnose and resolve electrical issues in existing systems, conducting regular maintenance to ensure optimal performance.3. Project Coordination: Collaborate with project managers and other engineers to coordinate project timelines, requirements, and deliverables effectively.4. Compliance and Quality Control: Ensure all electrical work complies with safety regulations and quality standards, conducting regular checks and documentation.5. Technical Support: Provide technical assistance and guidance to team members and clients, helping to resolve any electrical-related queries.Required Skills and Expectations:The ideal candidate should hold a diploma in Electrical Engineering and have proven experience in the field. Strong knowledge of electrical design principles, system installation, and maintenance practices is essential. Excellent problem-solving abilities, attention to detail, and strong interpersonal skills are required. The candidate must be comfortable working in an office environment and be capable of collaborating with diverse teams to achieve project goals. Being proactive, organized, and effective in communication will contribute greatly to the success of the projects undertaken.

Key ResponsibilitiesDesign, install, test, and maintain electrical systems, equipment, and components.Monitor electrical operations and ensure compliance with safety and quality standards.Perform preventive and corrective maintenance of electrical equipment and machinery.Troubleshoot electrical faults and implement timely solutions to minimize downtime.Prepare electrical drawings, technical specifications, and project documentation.Conduct inspections and electrical testing to ensure operational reliability.Coordinate with production, maintenance, and project teams on electrical requirements.Ensure compliance with statutory regulations, electrical codes, and safety procedures.Support the installation and commissioning of new equipment and systems.Analyze energy consumption and recommend efficiency improvement measures.Manage contractors and vendors involved in electrical projects.Maintain accurate maintenance records, reports, and technical documentation.

Industrial Robotics EngineerExperience: 8-11 YearsLocation: PuneWe are hiring an Industrial Robotics Engineer to design, program, integrate, and optimize robotic systems and motion-control solutions for industrial automation applications.Key ResponsibilitiesDesign and implement industrial robotic systems and automation solutions.Develop robot programs, motion-control logic, and control sequences.Integrate robots with PLCs, sensors, servo drives, and other automation equipment.Perform robot commissioning, troubleshooting, and performance optimization.Support robotic cell integration and production-line automation.Collaborate with mechanical, electrical, and controls engineering teams.Ensure safety standards, system reliability, and project delivery timelines.Relevant SkillsIndustrial Robotics, Robot Programming, Motion Control, PLC, Servo Drives, Robot Integration, Industrial Automation, ABB Robots, FANUC, KUKA, Siemens PLC, Robot Simulation, Safety Systems, Commissioning, Troubleshooting

PLC EngineerExperience: 9-12 YearsLocation: HyderabadHiring Company: Talent Zone ConsultantBrief JD:We are hiring a Senior PLC Engineer with strong experience in industrial automation, PLC programming and control systems. The role involves PLC/HMI programming, machine automation, commissioning, troubleshooting and coordination with project and customer teams.Key Responsibilities:Develop, modify and troubleshoot PLC programs.Configure and integrate HMI/SCADA systems.Execute automation projects from design through commissioning.Perform machine testing, commissioning and troubleshooting.Coordinate with electrical, mechanical and project teams.Provide onsite technical support to customers.Prepare technical documentation and project reports.Relevant Skillset:PLC Programming, Industrial Automation, Siemens PLC, Allen Bradley, Rockwell, HMI, SCADA, VFD, Servo, Motion Control, Control Systems, Electrical Panels, Commissioning, Troubleshooting, AutoCAD, TIA Portal

We need 4 Engineers to work permanently at Saudi Arabia.Testing & Commissioning for MV & HV Switchgear, Relay and Control scheme , Numerical Protection Relays , troubleshooting for daily operation sub stations.Experience in maintaining protective Relays & Control equipment for 33-230 kV Substation Substations and Transmission Lines.Installation, calibration, adjustment and perform Preventive maintenance on protective relays, relaying schemes, control circuits, Power Line carrier, Fault recorders, Sequence of Event recorders and metering equipment in Power Plants and substations.Experience on Numerical, Static and Electro-Mechanical Relays for the protection of Lines, Transformers, Bus bars, and Breaker Back-up etc.Well experienced with schemes of Differential, Distance, O/C, E/F, directional, REF, Bus bar Differential, Breaker failure protections supplied by the ABB/AREVA/Siemens/GE etc.Perform maintenance of ABTS, PLC, Battery chargers and SCADA controls.Undertake more independent work concerned with commissioning of new protective equipment, troubleshooting of equipment tripping and analyzing test results.

Key Responsibilities:1. Design and develop industrial automation systems: In this role, you will be responsible for designing and developing automation systems for industrial processes, ensuring efficiency and reliability.2. Program PLCs and HMIs: You will be required to program Programmable Logic Controllers (PLCs) and Human Machine Interfaces (HMIs) to control various machinery and processes in industrial settings.3. Troubleshoot and maintain automation systems: You will need to troubleshoot any issues that arise with automation systems and perform regular maintenance to ensure optimal performance.4. Collaborate with cross-functional teams: As an Industrial Automation Engineer, you will work closely with other engineering teams, production teams, and technicians to integrate automation solutions and optimize processes.5. Stay updated on industry trends and technologies: You will be expected to keep yourself informed about the latest trends and technologies in industrial automation to enhance systems and processes continuously.Required Skills and Expectations:1. Bachelor's degree in Engineering, preferably in Electrical or Mechanical Engineering.2. Knowledge of PLC programming and HMI development.3. Strong problem-solving skills and the ability to troubleshoot technical issues.4. Good communication skills and the ability to work effectively in a team.5. Attention to detail and a proactive approach to work.6. Willingness to learn and adapt to new technologies in the field of industrial automation.

Innovic India Pvt. Ltd. is hiring for B.E/B.Tech/Diploma/ITI Fresher engineer/Electrical Engineer/Mechanical Engineer/Instrumentation & Control Engineer for Patna, Noida, Delhi NCR Location.We are seeking Fresher Electrical Engineer with Hands on Practical Training on Industrial Automation( PLC, SCADA, DCS, HMI, VFD, Instrumentation, Panel Designing, AutoCAD Designing etc...Interested candidate can contact us on +91-8882999066Email- bharti.innovic@gmail.comEmail- www.innovicindia.com

We are Looking Fresher Mechanical Engineer Who have Good Practical Knowledge of Industrial Automation Tools Like, Plc, Scada,Hmi, Vfd, Dcs. Panel Designing Etc..

Designation :- Automation EngineerQualification:- Diploma Or BE/B.Tech In Mechanical/Electrical Engineering Experience :- 6 Years To 7 Years Salary:- As Per Interview Gender:- MaleJob Responsibilities:- i) Develop, modify, and troubleshoot PLC, HMI, and SCADA programs.ii) Diagnose automation system faults and restore machine functionality.iii) Work on servo drives, VFDs, sensors, and control panel wiring.iv) Support automation upgrades and new machine commissioning.v) Ensure system safety and compliance with automation standards.vi) Perform preventive maintenance on automation systems.vii) Coordinate with production teams to improve cycle time and process efficiency.viii) Maintain documentation of programs, backups, and wiring diagrams.Job Location:- Palghar, Maharashtra Industry:- Reputed Manufacturing Industry

Designation :-Electrical Engineer Department:- Inhouse Services (No Field Work)Qualifications:- BE/B.Tech In Electrical Engineering Experience:- 1 Years To 5 YearsSalary:- As Per InterviewGender:- MaleJob Location:- Umbergaon, GujaratIndustry:- Manufacturing Company