Quality Inspector Job Vacancies in Haryana

JOB DESCRIPTION - QUALITY CONTROL (QC) MANAGERPosition: Quality Control (QC) ManagerDepartment: QualityLocation: Bahadurgarh/Jhajjar, HaryanaQualification: B.Tech - Mechanical EngineeringExperience: 4-5 YearsSalary: Up to 40,000 CTC per monthFinal Salary: Depending on technical knowledge, relevant experience, and interview performanceIndustry: MS Fabrication / Engineering / ManufacturingJob SummaryWe are looking for an experienced QC Manager with strong practical knowledge of MS fabrication, welding, engineering drawings, inspection and ISO quality systems. The candidate will be responsible for maintaining product quality from incoming material through fabrication, welding, assembly and final inspection.Key Responsibilities Manage day-to-day Quality Control activities on the fabrication/manufacturing shop floor. Inspect MS fabricated components, structures, frames, and welded assemblies. Conduct incoming material, in-process, and final inspections. Ensure fabricated parts comply with approved engineering drawings, dimensions, and tolerances. Monitor welding quality and identify defects such as porosity, undercut, cracks, improper weld size, and distortion. Check fit-up, dimensions, weld size, and overall workmanship. Maintain inspection reports, check sheets and quality records. Raise and manage NCRs (Non-Conformance Reports) and implement corrective/preventive actions. Perform Root Cause Analysis for recurring quality issues. Coordinate with Production, Design, Purchase and Project teams for quality improvements. Ensure measuring and inspection instruments are properly calibrated. Support customer inspections and internal/external quality audits. Maintain quality procedures and documentation according to ISO 9001 Quality Management System requirements. Monitor supplier/vendor quality as required. Reduce rejection, rework, and customer complaints through continuous improvement.Technical Knowledge Required MS fabrication and welded assemblies MIG/MAG and Arc welding inspection Welding symbols and fabrication drawings Engineering drawing interpretation Basic GD&T and dimensional tolerances Vernier calliper, micrometre, height gauge, weld gauge and other inspection instruments Visual welding inspection Raw-material inspection and material identification NCR and CAPA Root Cause Analysis and 5 Why ISO 9001 documentation and audit requirements Calibration and inspection records Basic MS Excel and quality documentationJoining Preference: Immediate or early joiner preferred.

Position: MerchandiserIndustry: Garment / Apparel Export HousePreferred Candidate: Experience handling leads from Buying HousesKey ResponsibilitiesHandle and coordinate leads received from buying houses and follow up with buyers.Communicate with buyers regarding new orders, product specifications, samples, and requirements.Coordinate with sampling, fabric, trims, production, and quality teams.Follow up on sample development, approvals, costing, and order confirmations.Prepare quotations, costing sheets, order sheets, and merchandising reports.Monitor order progress from sampling to production and final shipment.Ensure product quality and timely delivery as per buyer requirements.Maintain strong professional relationships with buying houses and clients.Required Skills&QualificationsRelevant experience in garment merchandising or an apparel export house.Experience handling buying house leads and buyer coordination is preferred.Good knowledge of garment manufacturing, fabrics, trims, sampling, and production processes.Strong communication, negotiation, and follow-up skills.Knowledge of MS Excel and merchandising documentation.Ability to manage multiple orders and meet deadlines.Interested candidates can share their updated CV for screening and shortlisting.KUMAR & KAUR JOB CONSULTANCY PVT. LTD.Right Talent Right Job Better Future Shortlisted candidates will be contacted for the interview.

Role & responsibilities Manage day-to-day production activities for Namkeen and Sweets.Develop and maintain consistent taste, texture, appearance, and quality of products.Monitor production processes and ensure products meet company quality standards.Handle recipe standardization and product improvement.Identify and resolve production and quality-related issues.Check and control the quality of raw materials, ingredients, oil, spices, dry fruits, etc.Reduce production wastage and improve yield and productivity.Coordinate with Production, Quality, Purchase, and R&D teams.Maintain proper production records, batch details, and quality parameters.Ensure proper hygiene, food safety, and GMP practices on the production floor.Train and supervise production staff and workers.Assist in developing new namkeen and sweet products according to market requirements.Preferred candidate profile: Associate Manager Namkeen & Sweets to manage and improve the production, quality, taste, consistency, and product development of namkeen and traditional sweets.The ideal candidate should have strong practical knowledge of namkeen and sweets manufacturing, raw materials, recipes, processing methods, quality standards, and production troubleshooting.

BLW ENGINE VALVE PVT. LTD.Location: Village -Zardakpur, Badli-Bahadurgarh Road, HaryanaIndustry: Automobile Spare Parts / Engine Components / Export DivisionExperience: 7+ YearsEmployment Type: Full TimeCTC: Negotiable (Best in Industry)JOB PROFILEWe are looking for an experienced & result-oriented Senior Packing Supervisor to supervise complete packing operations for automobile spare parts and engine components, ensuring export-standard packaging, quality, accuracy, productivity and timely dispatch.KEY RESPONSIBILITIES Supervise daily packing operations Manpower planning & team management Ensure correct part identification, quantity & labelling Export packing as per customer specifications FIFO & traceability Coordinate with Production, Quality, Stores & Dispatch Prevent damage, rust, scratches, contamination & mix-up Monitor packing productivity & dispatch targets Control packing material consumption & wastage Packing documentation & Excel records Palletization, stacking & loading Handle packing-related customer complaintsREQUIRED SKILLS Strong knowledge of automobile spare parts / precision components packing Export packaging, palletization, strapping & wrapping FIFO, 5S, traceability & inventory control

We are looking for a Quality Inspector to join our team in Bawal. The ideal candidate will have 1 to 4 years of experience in quality inspection and must hold an I.T.I. certification. Key Responsibilities:- Inspect Products: Conduct regular inspections of products to ensure they meet quality standards. This involves checking dimensions, functionality, and appearance.- Document Findings: Record inspection results and maintain detailed reports. This helps in tracking product quality over time and identifying areas for improvement.- Identify Defects: Spot any defects or irregularities in products and take necessary actions, such as notifying the production team or rejecting non-compliant items.- Support Team: Collaborate with the production and engineering teams to maintain quality processes. Effective communication can help address quality issues promptly.- Follow Standards: Ensure that all inspection processes comply with industry standards and company policies. Adhering to these guidelines is crucial for maintaining product quality.Required Skills and Expectations:- Candidates should have completed I.T.I. in a relevant field. - A minimum of 1 year of experience in quality inspection is preferred.- Strong attention to detail is essential to accurately identify and document defects.- Good communication skills are needed to work effectively with team members and discuss quality issues.- Ability to work independently and in a team environment is vital, as the role requires collaboration with various departments.- Familiarity with quality control tools and techniques is an advantage.

We are seeking a Quality Controller to ensure our products meet the highest standards of quality. This role is suitable for candidates with 0 to 2 years of experience, and an I.T.I. qualification is required.Key Responsibilities:- Inspect Products: Conduct thorough inspections of products at various stages of the manufacturing process to ensure they meet specified quality standards.- Record Findings: Document inspection results and findings accurately, maintaining detailed reports that can be reviewed by management.- Communicate Issues: Work with production teams to communicate any quality issues or defects and collaborate on solutions to prevent recurrence.- Maintain Standards: Ensure compliance with quality control processes and standards, helping to implement improvements where necessary.- Participate in Training: Assist in training new employees on quality control procedures and best practices to foster a culture of quality within the team.Required Skills and Expectations:Candidates should have a strong attention to detail and the ability to identify defects in products. Good communication skills are essential for discussing issues with the production team. The role requires basic knowledge of quality control principles and an eagerness to learn and apply best practices. A proactive attitude toward maintaining high standards and a commitment to continuous improvement are important for success in this position. Male candidates are preferred for this role.

Quality Inspector - Job SummaryDepartment: QualityLocation: Faridabad (Sikri)Experience Required: 1-3 years

The candidte having Good Experience in steel processing Industry In Quality. Checking the Incoming Material quality, Inprocess Inspection and Final Inspection of the product manufactured. Should have experience in Steel Industry In Production and Quality. Should be a mechanical Engineer by qualification and having 3 to 5 yrs of experience in Quality .

ITI in all Mechanical Trades (mechanical Technician)Polytechnic Diploma in all Mechanical TradesB.e./b.tech in all Mechanical Trades10th and 12th with Automobile Manufacturing Company Experience

Heat Treatment furnace operator , Sealed Quench furnace operator, Nitriding Furnace operator , Should be able to handle the shift independently . Should be having experience of heat treatment industry .

Urgent Hiring: Quality Control (QC) Department Approved ProfessionalsCompany: R K LIFE CARE INCIndustry : Dry injection Pharmaceutical IndustryLocation: Jhajjar, HaryanaExperience: 5+ Years in Pharmaceutical Quality ControlWe are hiring an experienced QC Department Approved Professional for our pharmaceutical manufacturing unit.Key Responsibilities:Lead QC operations with WHO-GMP / EU-GMP complianceReview raw materials, in-process & finished product analysisHandle lab documentation, audits & investigationsManage QC team and analytical instrumentsRequirements:M.Sc. / B.Pharm / M.Pharm5+ years QC experience in pharma industryKnowledge of HPLC, UV, FTIR & other lab instrumentsCall us to know more details:+91 98733 31448

The Quality Inspector is responsible for inspecting, testing, and monitoring products to ensure they meet required quality standards, specifications, and customer expectations. This role plays a key part in identifying defects, supporting continuous improvement, and maintaining compliance with quality systems.Key ResponsibilitiesInspect incoming, in-process, and finished products to ensure compliance with specificationsPerform visual, dimensional, and functional inspections using measuring tools and gaugesIdentify, document, and report defects or non-conformitiesMaintain accurate inspection and test recordsFollow quality control plans, work instructions, and SOPsSupport root cause analysis and corrective/preventive actions (CAPA)Ensure adherence to safety, quality, and regulatory standardsCollaborate with production, engineering, and quality teamsAssist with audits and quality improvement initiatives

Highly experienced Quality Professional with strong knowledge of Sheet Metal and Fabrication processes in the Automobile Industry. Well-versed in Quality Systems, Team Handling, Documentation, and Reporting. Skilled in maintaining customer satisfaction through effective quality control, inspection systems, and continuous improvement practices.

Blueprint & Drawing Interpretation:Read and interpret engineering drawings, blueprints, and job specifications to determinedimensions and tolerances. Grinding & Finishing:Perform precision grinding operations to achieve required surface finish and accuracy.Select appropriate grinding wheels and abrasives for each job. Quality Inspection:Inspect finished parts using micrometers, vernier calipers, height gauges, and surfacefinish comparators. Maintain high accuracy and finish standards. Maintenance & Safety:Perform routine cleaning and maintenance of machines and tools. Follow all safetyprocedures while operating grinding equipment. Tool Room Support:Assist in manufacturing and reconditioning of dies, jigs, fixtures, punches, and other toolroom components. Work closely with toolmakers and production teams to resolve toolrelated issues. Documentation:Maintain job records, inspection reports, and tool maintenance logs.

Quality Inspector B tech or Diploma in Mechanical

Expertise in quality control

Married Educated Female CandidateJob Timing 9AM to 7PMNearby Sonipat And Ganaur Job Available in Barhi Industrial area Phase 1

As a Plant Manager, you will play a vital role in overseeing daily operations of the manufacturing facility located in Bahadurgarh. You are expected to ensure the plant operates efficiently and meets production goals.Key Responsibilities:- Manage Production Schedules: Create and maintain production schedules to ensure timely delivery of products. This involves coordinating with different departments to align resources effectively.- Oversee Quality Control: Implement quality control measures to maintain product standards. You will regularly inspect processes and products, addressing any deviations from quality benchmarks.- Supervise Staff: Lead and manage plant employees, providing guidance and support. This includes training new staff, monitoring performance, and ensuring a safe working environment.- Maintain Equipment: Ensure all machinery and equipment are well-maintained and functioning optimally. You will schedule regular maintenance checks and address any repairs promptly to minimize downtime.- Monitor Inventory Levels: Keep track of raw materials and finished goods inventory. You will work closely with the procurement team to ensure the plant has adequate supplies for production.- Implement Safety Protocols: Promote a culture of safety within the plant by enforcing safety regulations and procedures. Regular training sessions will be part of your responsibility to ensure all staff are aware of safety practices.Required Skills and Expectations:Candidates should have 3 to 5 years of relevant experience in a manufacturing environment, with a focus on operational management. An I.T.I. qualification is necessary. Proficiency in team management, problem-solving, and communication is expected. The ideal candidate should be able to work effectively under pressure, demonstrating strong leadership skills in a fast-paced environment. A proactive approach to process improvement and a commitment to ensuring workplace safety are essential.

To perform incoming, in-process, and final quality inspections on electronic components, printed circuit boards (PCBs), and assembled devices. The role ensures zero-defect manufacturing and adherence to company standards and electrical safety regulations.Visual Inspection: Inspect PCBs and assemblies for soldering defects (e.g., dry joints, bridging, solder balls) and missing, misaligned, or damaged components.Functional Testing: Use multimeters, oscilloscopes, LCR meters, and custom test jigs to check the voltage, current, and overall functionality of circuits.Defect Logging & Reporting: Identify, tag, and segregate defective or rejected materials. Document defect types and maintain daily inspection logs.

Urgent Hiring: Quality Control (QC) Department Approved ProfessionalsCompany: R K LIFE CARE INC - (Dry injection Pharma Company)Location: Jhajjar, HaryanaExperience: 5+ Years in Pharmaceutical Quality ControlWe are hiring an experienced QC Department Approved Professional for our pharmaceutical manufacturing unit.Key Responsibilities:Lead QC operations with WHO-GMP / EU-GMP complianceReview raw materials, in-process & finished product analysisHandle lab documentation, audits & investigationsManage QC team and analytical instrumentsRequirements:M.Sc. / B.Pharm / M.Pharm5+ years QC experience in pharma industryKnowledge of HPLC, UV, FTIR & other lab instruments