Inspector Jobs

Key ResponsibilitiesFirst-Piece & Line Inspection: Conduct first-piece approval at the start of every shift or batch change to verify setup accuracy. Perform routine, scheduled hourly audits along the production line.Dimensional & Visual Checks: Measure parts against engineering drawings using hand-held precision inspection tools (e.g., Vernier calipers, micrometers, height gauges, thread plug/ring gauges, dial indicators).Incoming Material Inspection: Inspect incoming raw materials, fabricated components, or packaging supplies against purchase order specs and sampling plans (such as AQL standards).Defect Isolation & Red-Binning: Immediately halt production or segregate defective components into designated Red Bins (Non-Conforming Material areas) when defects exceed acceptable limits.Reporting & Log Maintenance: Maintain clean, readable daily inspection reports, rejection logs, and shift-wise quality summaries.Final Quality Audit: Run final visual checks and cosmetic inspection on finished goods before boxing, ensuring correct labeling and packaging compliance.

Job Opening: Civil EngineerLocations: Balestier Road, Singapore Salary: $2,000 $3,000 USD per monthContract: 2-Year Work Permit Visa________________________________________About the Position:We are recruiting experienced Civil Engineers for leading construction companies in Singapore, New Zealand, and Azerbaijan. This opportunity offers an excellent salary package along with full support for working abroad.________________________________________Responsibilities:Plan, design, and oversee construction and maintenance of building structures and infrastructureEnsure compliance with project specifications, safety standards, and government regulationsManage construction sites and coordinate with other engineers, contractors, and clientsPrepare reports, cost estimates, and project documentationResolve issues that arise during construction projects efficiently________________________________________Candidate Requirements:Proven experience as a Civil Engineer in construction projectsStrong knowledge of engineering principles and practicesExcellent communication and leadership skillsWillingness to relocate internationally________________________________________Company Benefits:Flight ticket provided by the company2-year work permit visaComprehensive medical coverageFood and accommodation providedVisa and biometric charges fully coveredMinimal service charge transparent and no hidden fees________________________________________Office Location for Registration & Processing:AL HUDA MANPOWERKolkata, West BengalTake this opportunity to grow your international career with full support from the company. Apply now!

Quality Inspector - Job SummaryDepartment: QualityLocation: Faridabad (Sikri)Experience Required: 1-3 years

We are seeking an experienced Coating Inspector to join our team in Hazira, Surat. The ideal candidate will have 10 to 20 years of relevant experience and a post-graduate education. This full-time position requires strong technical knowledge and attention to detail.Key Responsibilities:Inspect Coated Surfaces: Ensure that all coatings meet the required standards by conducting thorough visual and mechanical inspections on finished products to identify defects and ensure quality.Conduct Testing: Perform various tests on coatings, including adhesion tests and thickness measurements, to verify that they comply with industry specifications and safety standards.Document Findings: Maintain accurate records of inspection results and prepare detailed reports for management, highlighting any issues and suggesting corrective measures.Collaborate with Teams: Work closely with production and engineering teams to address coating-related challenges and provide solutions to enhance product quality.Stay Updated: Keep abreast of the latest developments in coating technologies and industry trends to ensure the company adheres to best practices.Required Skills and Expectations:The ideal candidate must possess a strong understanding of coating processes and materials, along with excellent analytical skills. A keen eye for detail and the ability to work efficiently under pressure are essential. Effective communication skills are necessary for collaborating with various teams and presenting findings clearly. Candidates should be male and able to work from the office.

JD-Quality Inspector (Quality Department)Position: Quality Line InspectorNo. of open positions: 6 nos Department: QualityIndustry: Pressure Die CastingLocation: Doddabhallapur Job SummaryThe Patrol Inspector is responsible for monitoring and inspecting production activities on the shop floor to ensure that products manufactured in the Pressure Die Casting process meet specified quality standards and customer requirements. The role involves conducting in-process inspections, identifying defects, ensuring process compliance, and supporting continuous quality improvement initiatives.

As a Mechanical Supervisor, you will play a vital role in overseeing mechanical operations and ensuring everything runs smoothly in the facility. Your responsibilities will include:- **Supervising Mechanical Team**: Oversee the daily activities of mechanical staff, ensuring efficient workflow and adherence to safety protocols.- **Conducting Inspections**: Regularly inspect machinery and equipment to identify any maintenance needs or potential issues, ensuring all operations meet quality standards.- **Coordinating Repairs**: Manage and coordinate repair schedules, ensuring that all machinery is functioning effectively and minimizing downtime.- **Training Staff**: Provide training and guidance to new mechanical staff, helping them understand processes, safety standards, and operational protocols.- **Reporting Issues**: Document and report any mechanical failures or maintenance issues to management, contributing to continuous improvement efforts.To be successful in this role, you should have:- A Diploma in Mechanical Engineering or a related field, ensuring you have the necessary technical knowledge.- 1 to 3 years of relevant experience, giving you a solid foundation in mechanical supervision.- Strong leadership and team management skills to effectively guide and support your team.- Excellent problem-solving abilities, allowing you to address issues quickly and efficiently.- Good communication skills to facilitate interaction between team members and management.You should be a dedicated and proactive individual who can work well in a team environment while being comfortable with hands-on responsibilities. Being a male candidate is preferred for this position.

We are seeking a dedicated QC Chemist to ensure the quality and safety of our products in Anand, India. This full-time position is ideal for recent graduates or those with up to six years of experience in chemistry or related fields.Key Responsibilities:- **Quality Testing**: Perform testing and analysis of raw materials, in-process samples, and finished products to ensure they meet established specifications.- **Document Management**: Maintain accurate records of test results and procedures to ensure compliance with quality standards.- **Equipment Calibration**: Operate and calibrate laboratory equipment, ensuring all instruments are functioning correctly and producing reliable data.- **Problem Solving**: Identify and troubleshoot quality issues, proposing solutions to prevent recurrence and enhance product quality.- **Collaboration**: Work closely with other departments, such as production and regulatory affairs, to align quality processes and improve overall product standards.Required Skills and Expectations:Candidates should possess a degree in chemistry or a related field. Strong attention to detail is essential, as is the ability to critically analyze test results. Familiarity with laboratory equipment and safety protocols is a must. Effective communication skills will facilitate collaboration with team members and other departments. The ideal candidate is motivated, flexible, and eager to learn in a fast-paced environment. A proactive approach to problem-solving will greatly contribute to ongoing quality improvements.

Job Description:-Supervision: Oversee daily fettling operations, allocating work based on production schedules.Dimensional Accuracy: Ensure finished castings meet specified dimensions, removing flash and defects.Quality Control: Inspect castings and collaborate with quality teams to reduce rejections.Tool Management: Oversee the maintenance of grinders, pneumatic tools, and blasting machinery.Experience: Generally 1-3+ years in a foundry setting, often specifically in Sand casting.Skills: Proficiency with fettling equipment and knowledge of casting standards

We are looking for a dedicated Quality Inspector to ensure that our products meet high standards of quality. The role is based in Anand and requires someone who is detail-oriented and has experience in quality control. **Key Responsibilities:**- **Inspection of Products**: Examine finished products for defects, ensuring they meet safety and quality standards.- **Conduct Tests**: Perform necessary tests on products and materials to check for durability and reliability.- **Documentation**: Maintain accurate records of inspections and test results, reporting any deviations from quality standards.- **Collaboration**: Work closely with production teams to address any quality issues and implement corrective actions.- **Training**: Assist in training new staff on quality control processes and best practices to maintain product standards.**Required Skills and Expectations:**- Experience in quality inspection in a manufacturing environment is preferred, ideally between 1 to 3 years.- Must have a minimum of a 12th grade education.- Strong attention to detail is critical to identify potential flaws in products.- Good communication skills are needed for effective collaboration with team members.- Basic knowledge of quality assurance processes and methodologies is advantageous.- Ability to follow precise instructions and maintain accurate documentation.This position requires commitment to maintaining our quality standards and a proactive approach to problem-solving. Successful candidates will play a vital role in ensuring customer satisfaction through high-quality products.

As a Field Inspector, you will be responsible for conducting inspections and assessments in various locations within Delhi. This role requires attention to detail and a commitment to ensuring compliance with industry standards.Key Responsibilities:- Conduct Inspections: You will visit different sites to inspect and assess conditions, ensuring they meet established standards. This involves checking for compliance with safety regulations and quality guidelines.- Prepare Reports: After inspections, you will document your findings and prepare detailed reports. This documentation is crucial for tracking issues and ensuring that any necessary actions are taken promptly.- Communicate with Teams: You will work closely with other team members and departments to discuss inspection results. Clear communication is necessary to address any potential problems quickly and effectively.- Maintain Records: Keeping accurate records of inspections and findings is essential. You will be responsible for updating and managing these records as part of your daily tasks.Required Skills and Expectations:You should possess a relevant I.T.I. qualification and have a keen eye for detail, alongside a strong commitment to quality and safety. You should be comfortable working in various environments and be able to adapt your approach as needed. Good communication skills are important, as you will interact with different teams and individuals. Ideally, you should have some experience in a similar role, but recent graduates are welcome to apply. A proactive attitude and willingness to learn will contribute to your success in this position.

As a Quality Inspector in Chennai, you will play an important role in ensuring that products meet required standards and specifications. This is a full-time office-based position suitable for candidates with 0 to 4 years of experience and a diploma in a relevant field.**Key Responsibilities:**- **Inspect Products:** Regularly examine products for any defects or inconsistencies to ensure they meet quality standards.- **Maintain Records:** Document inspection results and maintain accurate reports, tracking the quality trends and issues observed during inspections.- **Test Materials:** Conduct tests on materials and components to verify their quality and safety, ensuring they comply with industry regulations.- **Collaborate with Teams:** Work closely with production and engineering teams to address quality issues and recommend improvements in processes.- **Assist in Quality Audits:** Participate in internal and external audits to assess compliance with quality standards and suggest necessary adjustments.**Required Skills and Expectations:**- **Attention to Detail:** Candidates must have a keen eye for detail to identify minor flaws and discrepancies in products.- **Problem-Solving Skills:** Ability to analyze problems, determine their root causes, and propose effective solutions is necessary.- **Communication Skills:** Strong verbal and written communication skills are vital for reporting findings and collaborating with team members.- **Basic Computer Skills:** Familiarity with computers and software used for documentation and reporting is expected.- **Team Player:** The candidate should work well in a team environment, supporting colleagues and contributing to a positive workplace culture.

Job Opening - Micro InspectorCompany: Foundry IndustryLocation: Kolhapur (MIDC Shiroli)Position: Micro InspectorSalary: 15,000 - 18,000Qualification: Diploma / Any DegreeExperience: 1 - 2 Years (Preferably in Foundry Industry) About the RoleA Micro Inspector is responsible for inspecting and analyzing the microstructure of metal components to ensure quality standards are met. This role is important in foundry operations to maintain product strength, durability, and defect-free output. Who Can ApplyCandidates with Diploma or any DegreeCandidates with 1-2 years of experience in foundry or manufacturing industryBasic knowledge of metallurgy or material testingFreshers with relevant technical knowledge can also be considered Key ResponsibilitiesPerform microstructure analysis of casted metal componentsPrepare and examine samples using microscope testingIdentify defects like cracks, porosity, and inclusionsMaintain inspection reports and documentationEnsure products meet quality standards and specificationsCoordinate with quality and production teamsFollow safety and quality procedures

An NDT Engineer is responsible for performing non-destructive testing to evaluate the properties, integrity, and quality of materials, components, and structures without causing damage. The role ensures compliance with industry standards, safety regulations, and client requirements.Key Responsibilities:Conduct NDT inspections using methods such as:Ultrasonic Testing (UT)Radiographic Testing (RT)Magnetic Particle Testing (MPT)Dye Penetrant Testing (DPT/PT)Visual Testing (VT)Interpret test results and prepare detailed inspection reportsEnsure testing is performed as per applicable codes and standards (ASTM, ASME, ISO, etc.)Calibrate and maintain NDT equipmentIdentify defects, discontinuities, and non-conformities in materialsCoordinate with production, quality, and client teamsMaintain proper documentation as per National Accreditation Board for Testing and Calibration Laboratories (NABL) requirements (if applicable)Ensure compliance with safety procedures during testing operationsAssist in audits and quality system implementation

We are currently hiring Blue Collar - Quality Inspector candidates for Chennai & nearby locations across leading automotive/manufacturing companies. Openings available at: Automotive OEMs (vehicle makers) + Tier-1/Tier-2 suppliers, Heavy engineering, steel, industrial manufacturing Industrial company. Locations: Irungattukottai (SIPCOT), Oragadam, Sriperumbudur, Maraimalai Nagar, Thiruvallur, Mahindra City, etc. Positions: 30+ openings Salary:

Perform regular quality assessments on all incoming materials from vendors and outgoing products for shipping.Reject all products and materials that fail to meet quality expectations.Read blueprints, plans, and specifications to understand the requirements of products and services.Measure product dimensions, examine functionality, and compare the final product to the specifications.Recommend improvements to the production process to ensure quality control.Document inspection outcomes by completing detailed reports and performance records.Teach the production team about quality control concerns to improve product excellence.Supervise the production process.Resolve quality-related issues in a timely manner.

Perform regular quality assessments on all incoming materials from vendors and outgoing products for shipping.Reject all products and materials that fail to meet quality expectations.Read blueprints, plans, and specifications to understand the requirements of products and services.Measure product dimensions, examine functionality, and compare the final product to the specifications.Recommend improvements to the production process to ensure quality control.Document inspection outcomes by completing detailed reports and performance records.Teach the production team about quality control concerns to improve product excellence.Supervise the production process.Resolve quality-related issues in a timely manner.

Perform regular quality assessments on all incoming materials from vendors and outgoing products for shipping.Reject all products and materials that fail to meet quality expectations.Read blueprints, plans, and specifications to understand the requirements of products and services.Measure product dimensions, examine functionality, and compare the final product to the specifications.Recommend improvements to the production process to ensure quality control.Document inspection outcomes by completing detailed reports and performance records.Teach the production team about quality control concerns to improve product excellence.Supervise the production process.Resolve quality-related issues in a timely manner.

Key ResponsibilitiesIncoming Material Inspection:Perform physical and dimensional inspections of raw materials, castings, forgings, or electronic components upon arrival.Interpret engineering drawings, blueprints, and standard inspection plans to verify parts accuracy.Gauge & Instrument Handling:Expertly operate standard precision measuring instruments such as Vernier Calipers, Micrometers, Height Gauges, Bore Gauges, and Thread Gauges.Ensure all inspection tools and instruments used are properly calibrated and maintained.Documentation & Reporting:Maintain detailed Incoming Inspection Reports (IIR) and update material status (Approved/Rejected/Hold) in the ERP or Excel tracking system.Generate Goods Receipt Notes (GRN) clearances for accepted batches.Rejection Management & Vendor Coordination:Identify deviations, issue Non-Conformance Reports (NCR) for defective materials, and isolate rejected stock in the designated red-bin/rejection area.Provide feedback and data to the Supplier Quality Assurance (SQA) team to help resolve recurring vendor issues.Process Compliance:Ensure compliance with ISO 9001, IATF 16949, or company-specific quality management systems.Practice 5S in the inspection area and follow proper material handling guidelines.

Multidisciplinary Inspection & Evaluation:Perform thorough visual and instrumental inspections of assets, equipment, components, and installations across various engineering disciplines (e.g., pressure vessels, piping, structural steel, electrical systems, control systems, civil foundations, machinery).Utilize a range of precision measuring instruments, non-destructive testing (NDT) techniques (e.g., VT, PT, MT, UT, RT interpretation where certified), and diagnostic tools.Assess the condition, integrity, and operational functionality of assets, identifying defects, corrosion, material degradation, structural anomalies, and electrical faults.Code & Standard Compliance:Ensure strict adherence to national and international engineering codes, standards, and regulatory requirements (e.g., ASME, API, ASTM, AISC, IS codes, relevant electrical codes, local building codes).Verify that construction, fabrication, installation, and maintenance activities meet approved drawings, specifications, and project quality plans.Documentation & Reporting:Prepare detailed, accurate, and concise inspection reports, including findings, observations, measurements, photographic evidence, and recommendations.Maintain comprehensive records of all inspection activities, test results, and corrective actions taken.Develop and update inspection checklists, procedures, and methodologies.Problem Identification & Resolution:Identify deviations, non-conformities, and potential risks, conducting root cause analysis for identified issues.Collaborate with engineering, production, maintenance, and project teams to develop and implement effective corrective and preventive actions.Provide technical advice and guidance on repair methodologies, material selection, and quality improvements.Collaboration & Communication:Liaise effectively with internal stakeholders (e.g., project managers, engineers, contractors, safety personnel) and external parties (e.g., clients, third-party inspectors, regulatory bodies).Clearly communicate complex technical information, inspection findings, and recommendations to diverse audiences.Participate in pre-inspection meetings, progress reviews, and final acceptance procedures.Safety & Quality Assurance:Promote and adhere to all health, safety, and environmental (HSE) policies and procedures during all inspection activities.Contribute to the continuous improvement of quality management systems and inspection processes.

As a Quality Line Inspector, you will play a crucial role in ensuring that our products meet high-quality standards. You will be responsible for inspecting and monitoring various production processes and finished goods to maintain compliance with quality specifications.**Key Responsibilities:**- **Visual Inspection:** Conduct thorough visual checks on products during and after production to identify defects and ensure quality standards are met. This involves assessing color, shape, and finish.- **Measurement and Testing:** Use measurement tools and equipment to verify product dimensions and functionality. This ensures that products meet specified tolerances and requirements.- **Documentation:** Maintain accurate records of inspection results and any defects found. This documentation is vital for tracking quality metrics and identifying areas for improvement.- **Process Improvement:** Collaborate with production teams to suggest improvements based on inspection findings. Your insights will help enhance overall product quality and efficiency.- **Compliance Checks:** Ensure that all products comply with relevant industry standards and regulations. This responsibility is essential for maintaining safety and quality in production.**Required Skills and Expectations:**Candidates should have a diploma in a related field and 2 to 3 years of experience in a quality control role. Strong attention to detail is essential to spot defects early. You should be familiar with quality tools such as measurement devices and testing equipment. Good communication skills are important for collaborating with team members effectively. You must be committed to maintaining high standards and motivated to contribute to continuous improvement in quality processes.

Job Opening - Fettling Inspector (Male Only)Company: Foundry IndustryLocation: Kolhapur (MIDC Shiroli)Position: Fettling InspectorSalary: 12,000 - 15,000Qualification: Diploma / Any DegreeExperience: 1 - 2 Years (Foundry Experience Required) About the RoleA Fettling Inspector is responsible for checking and ensuring the quality of casted components after the fettling process (removal of excess material, finishing, and cleaning). This role is important to ensure that the final product meets quality standards before dispatch. Who Can ApplyMale candidates with Diploma or any DegreeCandidates with 1-2 years of experience in foundry industryBasic knowledge of fettling, casting process, and finishing workAbility to identify surface defects and quality issues Key ResponsibilitiesInspect casted components after fettling and finishing processCheck for defects like burrs, cracks, blow holes, and excess materialEnsure proper grinding, cutting, and cleaning of componentsMaintain quality standards before final dispatchPrepare and maintain inspection reportsCoordinate with production and quality teamsEnsure adherence to safety procedures Required SkillsKnowledge of fettling and casting processAttention to detailBasic understanding of quality inspectionGood observation and reporting skills