QC Inspection Jobs

Wooden Pattern Refurbishing Repairing work Rework & Finishing, New Pattern Methoding, Pattern Mounting, On Casting Making & Dimension Inspection To Know about Carpenter Instrument, To Manager Pattern keep upto work location.

Key ResponsibilitiesTesting & Inspection: Perform Magnetic Particle Inspection (MPI/MPT) on various components such as castings, forgings, machined parts, and structural welds using methods like Yoke, Coil, or Bench types (Wet and Dry particle testing).Defect Interpretation: Interpret and evaluate test results based on flux leakage indications. Distinguish between actual relevant defects (cracks, porosity, lack of fusion) and non-relevant indications.Pre & Post-Processing: Ensure proper surface preparation of components prior to testing (cleaning, degreasing). Oversee post-test cleaning, rust prevention, and demagnetization procedures.Equipment Calibration: Regularly set up, calibrate, and check the performance of MPI equipment, UV lights, and magnetic field indicators (Pie gauges) to maintain inspection accuracy.Documentation & Reporting: Maintain meticulous inspection logs. Generate clear, compliant Pass/Fail NDT evaluation reports, accurately marking and segregating defective components.Standards Compliance: Ensure all inspections conform to client blueprints, standard operating procedures (SOPs), and international codes (such as ASME, ASTM, or AWS standards).Collaboration: Coordinate closely with Quality Control Engineers and Production Supervisors to communicate defect patterns, helping to identify root causes in the manufacturing line.

Position: Welding QC Inspector (Saudi Aramco Approved)Location: Saudi ArabiaEmployment Type: Full-TimeJob SummaryWe are seeking an experienced and Saudi Aramco-approved Welding QC Inspector to join our Oil & Gas project team. The successful candidate will be responsible for ensuring that all welding and fabrication activities comply with Saudi Aramco requirements, approved procedures, project specifications, and international standards. The role includes inspection, documentation, coordination with construction teams, and ensuring quality compliance throughout the project lifecycle.Key ResponsibilitiesPerform welding inspections before, during, and after welding activities.Verify compliance with approved WPS, PQR, ITP, and project specificationsReview welder qualification records (WPQ/WQT) and ensure only qualified welders perform welding.Inspect material identification, traceability, fit-up, joint preparation, alignment, and welding parameters.Monitor preheat, interpass temperature, and PWHT activities.Conduct visual inspections and coordinate NDT activities (RT, UT, MT, PT).Review NDT reports and ensure acceptance criteria are met.Raise NCRs for non-conforming work and verify corrective actions.Prepare inspection reports, weld maps, welding logs, and quality documentation.Participate in client inspections, audits, and project quality meetings.Ensure compliance with Saudi Aramco standards, project specifications, and HSE requirements.QualificationsDiploma or Bachelor's Degree in Mechanical Engineering or a related discipline.Saudi Aramco Approval as Welding QC Inspector (Mandatory).CSWIP 3.1 or AWS Certified Welding Inspector (CWI) certification.Minimum 5 years of experience in Oil & Gas, Petrochemical, Refinery, or Pipeline projects.Strong knowledge of ASME Section IX, ASME B31.3, AWS D1.1, API standards, and Saudi Aramco requirements.Ability to read isometric drawings, fabrication drawings, P&IDs, and welding symbols.Good communication, reporting, and documentation skills.Preferred SkillsExperience in piping, structural steel, pressure vessels, and static equipment.Familiarity with SAP, MS Office, and QA/QC documentation systems.Excellent problem-solving, teamwork, and coordination skills.BenefitsCompetitive salary packageCompany accommodation or housing allowanceTransportation providedMedical insuranceAnnual leave and air ticket as per company policyLong-term project opportunity

A Civil Quality Control (QC) Inspector ensures all construction activities and materials adhere to project specifications, industry standards, and regulatory codes. They monitor the work from the initial site preparation and foundation stages to final structural finishes, documenting results and identifying defects to guarantee structural integrity Education: Degree or Diploma in Civil Engineering or a relevant discipline. Experience: Typically 5 to 8 years of QA/QC experience, frequently in specific sectors like Oil & Gas, heavy civil, or commercial.

As a Quality Engineer, you will play a crucial role in ensuring the quality and reliability of our products. You will be responsible for developing and implementing quality control processes to meet our high standards.**Key Responsibilities:**- **Quality Assurance Testing:** Conduct thorough tests on products to identify any defects and ensure they meet quality standards. This helps ensure only the best products are delivered to customers.- **Process Development:** Create and improve quality control processes and procedures. This ensures that every product is consistently produced at the highest quality.- **Root Cause Analysis:** Investigate and analyze defects or failures in products to identify their root causes. Understanding these causes allows for better prevention strategies in the future.- **Documentation:** Maintain clear and detailed documentation of quality issues and test results. This documentation is essential for tracking improvements and ensuring accountability.- **Collaboration:** Work closely with production teams and other departments to address quality concerns and improve overall product quality. Cooperation is key to maintaining high-quality standards.**Required Skills and Expectations:**- **Educational Background:** A Bachelor of Engineering (B.E) degree is required, providing a solid foundation in technical principles.- **Experience:** Candidates should have 3 to 6 years of relevant experience in quality engineering.- **Analytical Skills:** Strong analytical skills are essential for assessing product quality and identifying areas for improvement.- **Attention to Detail:** A keen eye for detail is important to find and address issues that could affect product quality.- **Technical Proficiency:** Familiarity with quality control tools and techniques, as well as industry standards, is expected.- **Communication Skills:** Excellent communication skills are necessary to effectively report findings and collaborate with cross-functional teams.

We are seeking a Process Control Engineer based in Mumbai, India, with 0 to 4 years of experience and a diploma in engineering. This full-time position is ideal for a detail-oriented individual eager to contribute to our engineering team.As a Process Control Engineer, you will be responsible for ensuring that our industrial processes run smoothly and efficiently. You will monitor control systems, analyze process data, and implement improvements to enhance productivity and reduce costs.Key Responsibilities:1. **System Monitoring**: Regularly check and maintain control systems to ensure they function correctly and meet production targets.2. **Data Analysis**: Collect and analyze data from various processes to identify trends, variances, and opportunities for optimization.3. **Implementation of Improvements**: Collaborate with senior engineers to develop and implement process enhancements, focusing on quality and efficiency.4. **Troubleshooting**: Quickly respond to process disruptions, diagnosing issues and coordinating with team members to resolve them effectively.5. **Documentation**: Maintain comprehensive records of process changes, enhancements, and troubleshooting efforts to ensure compliance and facilitate knowledge sharing.Required Skills and Expectations:Candidates should possess strong analytical skills and attention to detail, along with a solid understanding of control systems. Effective communication is essential for collaborating with team members and providing clear reports. A willingness to learn and adapt in a fast-paced environment is crucial, as is a commitment to safety and quality standards in engineering practices.

ITI in all Mechanical Trades (mechanical Technician)Polytechnic Diploma in all Mechanical TradesB.e./b.tech in all Mechanical Trades10th and 12th with Automobile Manufacturing Company Experience

Designation :- OfficerDepartment:- Quality Assurance Qualification:- B.Pharma/M.PharmaExperience :- 2 Years To 3 Years Salary:- As Per Interview Gender:- Male Key Responsibilities:- i) To review all documents pertaining to vendor qualification and maintain the same in proper order and ensure proper filing for easy traceability.ii) To prepare and update approved vendor list as per schedule and distribute the same to concern departments.iii) To handle all pre shipment samples from new vendors for its documents and submission to QC.iv) Review and Handling of Documents for Qualification of API, RM and PM Vendors.v) Preparation and review of Vendor SOP and associated formats related to Vendor SOP.vi) To communicate with vendor with respect to any non-conformance and to obtain required Corrective Action and Preventive Action from vendor based on Audit report or CAPA received from vendor/ prepared Audit Closer documents.vii) To prepare Audit Closer documents.viii) To evaluate excipients vendor documents for the preparation of Quality Risk Management and evaluate the requirement of audits.ix) Archival of documents in respective file (received from vendor).x) Maintaining tracker and coordination with purchase and DQA team at R & D for any documents that is expired or not received.xi) Distribution of vendor qualification documents to the concerned department as an when required.Job Location:- Vapi, Gujarat Industry:- Reputed Manufacturing Industry

QUALITY INSPECTIONS AT FINAL STAGE AND INPROCESS STAGEMAKING CHECKING REPORTS .READ DRAWINGS AND CHECK PIECE ACCORDINGLYShould know the use of vernier calliper and micrometer.Able to work in shifts

We need Quality checking supervisors for Cocopeat growbag manufacturing unit, need any degree, only male candidates, experience /freshers can apply....PF benefits available., accommodation available, incentives for better performanceJob Types: Full-time, Permanent, FresherBenefits:Provident FundExperience:total work: FresherWork Location: In person

We are looking for a Quality Control Executive to ensure our products meet high standards of quality. The ideal candidate will have 3 to 6 years of experience in quality control and will be a proactive individual dedicated to maintaining excellence in product standards. Key Responsibilities:1. **Inspection of Products:** Conduct thorough inspections on finished products to identify any defects or deviations from quality standards. This involves using specific measurement tools and techniques to ensure compliance.2. **Testing Procedures:** Execute detailed testing procedures to assess product functionality and safety. This includes both physical tests and analytical methods to confirm product integrity.3. **Quality Documentation:** Maintain accurate records of quality checks and inspections. Document any non-conformance and generate reports to help improve processes. 4. **Collaboration with Teams:** Work closely with production and supply chain teams to provide quality feedback and ensure adherence to quality standards throughout the manufacturing process.5. **Continuous Improvement:** Contribute to the development and implementation of quality improvement initiatives. Stay updated on industry trends to enhance quality control processes.Required Skills and Expectations:The candidate must have a strong attention to detail and the ability to identify subtle differences in products. Effective communication skills are essential for working with various teams and presenting findings clearly. Candidates must also demonstrate problem-solving abilities and a commitment to maintaining high standards in a fast-paced environment. A graduate degree is required, and preference is given to male candidates for this role.

Quality engineer for inspection of mechanical components. Should aware about measuring instruments, gauges, etc also experienced in operating computer, ms excel, ms office. Maintaing quality reports, documentation etc

As a Quality Control Inspector, you will play a vital role in ensuring that products meet the required standards of quality. Your responsibilities will include:- **Conducting Inspections:** You will be responsible for inspecting products at different stages of production to ensure compliance with quality standards and specifications.- **Documenting Findings:** After inspections, you will document your observations and findings in clear reports to track any issues or defects.- **Collaborating with Production Teams:** You will work closely with production teams to communicate quality issues and help identify solutions to improve processes.- **Performing Tests:** Running tests on products to check their durability and functionality will be key to ensuring that they meet quality requirements.- **Maintaining Equipment:** You will assist in maintaining and calibrating testing equipment to ensure accurate and reliable measurements.To succeed in this role, you should possess strong attention to detail and the ability to identify defects or irregularities in products. Strong communication skills are essential, as you will need to share findings with team members and suggest improvements. Additionally, a diploma and a willingness to learn about quality control processes are required. While previous experience is not necessary, candidates should be able to follow instructions meticulously and work effectively in a team environment. Adaptability and a proactive attitude towards problem-solving will also enhance your performance in this position.

Urgent Hiring: Quality Control (QC) Department Approved ProfessionalsCompany: R K LIFE CARE INC - (Dry injection Pharma Company)Location: Jhajjar, HaryanaExperience: 5+ Years in Pharmaceutical Quality ControlWe are hiring an experienced QC Department Approved Professional for our pharmaceutical manufacturing unit.Key Responsibilities:Lead QC operations with WHO-GMP / EU-GMP complianceReview raw materials, in-process & finished product analysisHandle lab documentation, audits & investigationsManage QC team and analytical instrumentsRequirements:M.Sc. / B.Pharm / M.Pharm5+ years QC experience in pharma industryKnowledge of HPLC, UV, FTIR & other lab instruments

We are looking for a dedicated Quality Assurance Executive to ensure that our products meet the highest quality standards. You will be responsible for monitoring the production process and performing quality checks to identify and resolve any issues.**Key Responsibilities:**- **Conduct Quality Inspections:** Regularly inspect products during and after the production process to ensure they meet our quality specifications.- **Documentation:** Maintain accurate records of quality tests, inspections, and any non-conformance issues to help track improvements and trends.- **Develop Quality Standards:** Collaborate with the production team to establish and update quality standards and procedures to enhance product quality.- **Train Team Members:** Provide training and guidance to staff about quality assurance processes and procedures to promote adherence to quality standards.- **Report Findings:** Prepare reports on quality issues, trends, and improvement areas and communicate these findings to management and relevant teams.- **Implement Improvement Strategies:** Work with various departments to develop strategies for reducing defects and improving overall product quality.**Required Skills and Expectations:**Candidates must have a diploma and between 2 to 5 years of experience in quality assurance. You should possess strong attention to detail and analytical skills to identify quality issues. Excellent communication skills are vital for effectively conveying quality standards and metrics. Proficiency in quality management tools and methodologies is preferred. You should be a team player who is adaptable and committed to maintaining high quality in all processes.

We are looking for a motivated Executive Quality Control to join our team in Ghaziabad. This role involves ensuring that our products meet the highest quality standards.**Key Responsibilities:**- **Product Inspection:** Conduct detailed inspections of products to identify any defects or discrepancies, ensuring they adhere to quality specifications.- **Quality Assurance Processes:** Implement quality control procedures and guidelines to ensure that all processes meet company standards.- **Documentation:** Maintain accurate records of inspections, including testing data and reports, to provide insights into product quality.- **Collaboration:** Work closely with production teams to communicate quality issues and support corrective actions to improve product quality.- **Training and Development:** Assist in training new team members on quality control processes and the importance of maintaining high standards.**Required Skills and Expectations:**- A Bachelors degree in Science (B.Sc) is required to understand the technical aspects of quality control.- Strong attention to detail to spot defects and make necessary recommendations for improvements.- Good communication skills to effectively convey quality issues to team members and management.- Ability to work well in a team environment, supporting colleagues in achieving common quality goals.- Willingness to learn and adapt to new quality control technologies and methodologies.Candidates should be proactive, organized, and ready to take on challenges in a fast-paced work environment.

Have to do inspection Activities as per drawing , Should have knowledge of Fabrication, Welding Defects,Good drawing reading ability ,ISO 9001-System awareness

Key ResponsibilitiesDimensional Measurement: Perform layout inspections, first-article inspections (FAI), in-process checks, and final inspections on engineering components using standard precision instruments.Instrument Operation: Expertly handle manual and digital measuring tools including Vernier Calipers, Micrometers, Height Gauges, Bore Gauges, Slip Gauges, and Bevel Protractors.Advanced Equipment Setup: Set up and operate advanced metrology equipment such as Coordinate Measuring Machines (CMM), Profile Projectors, or 2D/3D digital measurement systems (based on plant infrastructure).Blueprint Reading: Read, interpret, and accurately analyze complex engineering drawings, machining blueprints, and GD&T (Geometric Dimensioning and Tolerancing) symbols (such as concentricity, flatness, runout, and perpendicularity).Defect Segregation & Reporting: Identify out-of-tolerance parts, issue Non-Conformance Reports (NCR), and ensure defective materials are immediately tagged and segregated from the production line.Documentation & Compliance: Maintain detailed inspection reports, maintain first-article inspection records, and compile quality data for traceability and client submission.Calibration Support: Regularly verify the accuracy and calibration status of all handled measuring instruments before beginning inspection shifts.

Responsibilities:Quality Inspection & Testing:Perform thorough quality inspections of incoming raw materials, in-process components, and finished goods as per established Quality Control Plans and specifications.Conduct various tests (e.g., dimensional checks, functional tests, visual inspections) using appropriate inspection tools and equipment (e.g., Vernier calipers, micrometers, gauges, CMM, software testing tools).Verify product/service against drawings, specifications, and quality checklists.Defect Identification & Reporting:Identify, categorize, and document any defects, non-conformities, or deviations from quality standards.Initiate Non-Conformance Reports (NCRs) and ensure proper containment of defective materials/products.Report critical quality issues immediately to the supervisor and relevant departments.Documentation & Record Keeping:Maintain accurate and organized records of all quality inspections, test results, non-conformities, and corrective actions taken.Prepare daily/weekly/monthly quality reports, summaries, and trend analyses.Ensure all quality documentation is up-to-date and easily retrievable.Standard Adherence & Compliance:Ensure strict adherence to company quality management system (QMS) procedures, work instructions, and industry standards (e.g., ISO 9001, industry-specific standards like IATF 16949, ISO 13485, or GMP, depending on the sector).Assist in maintaining compliance with relevant regulatory requirements.Root Cause Analysis Support:Support the QA/Production team in investigating the root causes of quality issues, customer complaints, and recurring defects.Assist in implementing and verifying corrective and preventive actions (CAPA).Process Monitoring:Monitor production processes and operational steps to ensure quality parameters are being met at each stage.Provide feedback to production personnel on quality concerns and best practices.Equipment Management Support:Assist in the calibration and maintenance of inspection, measuring, and test equipment (IMTE).Continuous Improvement Contribution:Participate in and support quality improvement initiatives (e.g., Lean, 5S, Kaizen, Poke-Yoke) to enhance product quality, process efficiency, and reduce waste.Safety & Housekeeping:Adhere to all workplace safety protocols and maintain good housekeeping practices in the inspection areas.Communication (Local Emphasis):Communicate clearly and effectively with production teams, supervisors, and other internal departments regarding quality issues and requirements.Fluency in Marathi and Hindi is essential for effective interaction with shop-floor staff and local vendors. Good English proficiency is required for documentation, understanding specifications, and interaction with senior management.

Responsibilities:Inspection & Testing:Conduct thorough quality inspections of incoming raw materials, in-process components, and finished goods as per defined specifications, control plans, and sampling procedures.Perform various tests (e.g., dimensional checks, functional tests, visual inspections, destructive/non-destructive tests, as applicable to the product/industry) using appropriate measuring instruments and testing equipment.Operate and maintain quality testing instruments and equipment, ensuring their proper functionality and calibration status.Defect Identification & Reporting:Identify, document, and report any non-conformities, defects, or deviations from quality standards immediately.Segregate non-conforming materials/products and ensure proper tagging and disposition.Generate clear and concise inspection reports and test summaries.Documentation & Record Keeping:Maintain accurate and organized records of all quality inspections, test results, non-conformity reports, and corrective actions.Assist in preparing and updating quality documentation, including inspection checklists, standard operating procedures (SOPs) for quality processes, and quality control plans.Standard Adherence & Compliance:Ensure strict adherence to company quality policies, procedures, and relevant industry standards (e.g., basic understanding of ISO 9001 principles, product-specific standards like BIS, etc.).Monitor production processes to ensure that quality parameters are consistently met at various stages.Root Cause Analysis Support:Assist senior QA personnel or engineers in investigating the root causes of quality issues, customer complaints, and recurring defects.Support the implementation and verification of corrective and preventive actions (CAPA).Calibration Support:Support the periodic calibration of inspection and testing equipment, maintaining calibration records, and ensuring the availability of calibrated instruments.Feedback & Communication:Provide timely feedback on quality issues to the Production team, informing them of deviations and assisting in immediate rectification.Communicate effectively with supervisors, engineers, and other departmental personnel regarding quality matters.Continuous Improvement:Actively participate in quality improvement initiatives, such as 5S, Kaizen, and waste reduction efforts on the shop floor.Safety & Housekeeping:Adhere to all safety regulations and good housekeeping practices in the workplace, especially in testing and inspection areas.Local Communication:Communicate clearly and effectively with the production team, supervisors, and other colleagues. Fluency in Marathi and Hindi is essential for effective interaction on the shop floor. Good English proficiency is required for documentation and technical understanding.

Designation :- Quality AssuranceQualification:- D.Pharma/B.PharmaExperience :- Fresher Salary:- As Per Interview Gender:- MaleJob Location:- Boisar, Maharashtra Industry:- Manufacturing Industry/Reputed Engineer Company

Designation:- Quality Mechanical EngineerQualifications:- Diploma Or BE/B.Tech In Mechanical/CIPET Engineering Experience:- 2 Years To 4 Years Salary:- 22,000 To 25,000Gender:- MaleVacancy:- 02Job Location:- Umbergaon, Gujarat Industry:- Manufacturing Company

Designation :-Quality Executive Qualifications:- CIPET Experience:- Fresher To 1 Years Salary:- As Per InterviewGender:- MaleJob Location:- Sarigam, Gujarat Industry:- Manufacturing Company