Maintenance Mechanic Job Vacancies in Pune

Job Profile & Key Responsibilities:-A Service Engineer at Calitron Calibration Laboratory (OPC) Pvt. Ltd. is responsible for the installation, maintenance, testing, and field or lab calibration of electrical, electronics, mechanical, thermal, and flow instrumentation. On-Site & In-Lab Service: Handle both internal lab duties in Bhosari, Pune, and field-based service visits to customer sites for equipment inspection and maintenance (travel within city/country as required). Installation & Troubleshooting: Install, diagnose, and troubleshoot industrial test and measurement equipment. Documentation & Compliance: Maintain calibration certificates, service reports, logbooks, and trace measurement data accurately to ensure regulatory compliance. Customer Support: Coordinate with clients for equipment servicing, technical queries, and turnaround support.

Job TitleAircraft Maintenance Engineer (AME)DepartmentAircraft Maintenance / EngineeringLocationsPuneMumbaiNagpurNashikShirdiGoaAmravatiAurangabadKolhapurNavi MumbaiSolapurJob SummaryAn Aircraft Maintenance Engineer (AME) is responsible for inspecting, maintaining, repairing, troubleshooting, and certifying aircraft to ensure they are safe, airworthy, and compliant with aviation regulations. The role involves carrying out scheduled and unscheduled maintenance on aircraft systems, engines, avionics, electrical components, hydraulic systems, landing gear, and structural components while adhering to the standards established by aviation authorities.Key ResponsibilitiesAircraft Inspection & MaintenancePerform routine, preventive, scheduled, and unscheduled aircraft maintenance.Conduct daily, transit, weekly, A-check, B-check, C-check, and heavy maintenance inspections.Inspect aircraft structures, fuselage, wings, landing gear, flight controls, and engines.Diagnose and rectify aircraft defects using approved maintenance procedures.Replace, repair, and overhaul defective aircraft components.Ensure all maintenance tasks are completed according to the Aircraft Maintenance Manual (AMM).Troubleshooting & RepairsIdentify mechanical, hydraulic, electrical, pneumatic, and avionics faults.Use specialized diagnostic tools and testing equipment.Repair aircraft systems while maintaining manufacturer specifications.Coordinate with engineering teams for complex technical issues.Perform functional tests after repairs to verify serviceability.Engine & Component MaintenanceInspect aircraft engines for wear, leaks, corrosion, and damage.Perform engine servicing, oil changes, filter replacement, and component inspections.Maintain propellers, Auxiliary Power Units (APU), and fuel systems.Monitor engine performance and recommend corrective actions.Avionics & Electrical SystemsInspect communication and navigation systems.Maintain radar, autopilot, cockpit instrumentation, and electrical wiring.Test aircraft electronic systems for operational reliability.Ensure compliance with avionics maintenance procedures.Documentation & ComplianceComplete maintenance logs, inspection reports, and defect records.Maintain aircraft technical documentation accurately.Ensure compliance with aviation regulatory authorities.Certify aircraft for return to service after maintenance (where appropriately licensed).Follow company maintenance policies and quality assurance procedures.Safety & Quality AssuranceFollow all aviation safety regulations and standard operating procedures.Maintain clean and organized work areas.Ensure proper use of Personal Protective Equipment (PPE).Report safety hazards and technical discrepancies immediately.Participate in safety audits and quality inspections.Team CoordinationWork closely with pilots, technicians, quality inspectors, and operations staff.Coordinate maintenance schedules with flight operations.Assist junior technicians with technical guidance and training.Participate in emergency aircraft recovery and AOG (Aircraft on Ground) support.Required QualificationsDiploma or Bachelor's Degree in Aircraft Maintenance Engineering, Aeronautical Engineering, Mechanical Engineering, or Aerospace Engineering.DGCA-approved AME qualification or equivalent aviation authority certification is preferred.Valid Aircraft Maintenance Engineer License (where applicable).Type rating on specific aircraft is an advantage.Relevant experience in aircraft maintenance is preferred.Required SkillsStrong knowledge of aircraft systems and maintenance procedures.Excellent troubleshooting and fault diagnosis skills.Knowledge of aviation regulations and airworthiness standards.Ability to interpret aircraft maintenance manuals and engineering drawings.Strong analytical and problem-solving abilities.Excellent attention to detail.Good communication and teamwork skills.Ability to work under pressure and meet strict deadlines.Computer proficiency in maintenance management software.Good technical documentation skills.Technical KnowledgeAircraft StructuresGas Turbine EnginesHydraulic SystemsPneumatic SystemsElectrical SystemsAvionics SystemsFlight Control SystemsLanding Gear SystemsFuel SystemsAircraft DocumentationMaintenance PlanningAircraft Safety StandardsPreferred CertificationsDGCA Aircraft Maintenance Engineer LicenseEASA Part-66 License (preferred internationally)ICAO-compliant aviation trainingHuman Factors TrainingSafety Management System (SMS) TrainingFuel Tank Safety TrainingEWIS (Electrical Wiring Interconnection System) TrainingAircraft Type Rating CertificationWorking ConditionsAirport hangars, maintenance bases, and line maintenance stations.Rotational shifts including nights, weekends, and public holidays.Outdoor work in varying weather conditions.Physically demanding work involving standing, climbing, bending, and lifting equipment.Exposure to aircraft noise, fuels, lubricants, and hydraulic fluids while following strict safety procedures.Salary Range (India)Fresher: 3.5 - 6 LPA2-5 Years: 6 - 10 LPA5-10 Years: 10 - 18 LPALicensed/Type-Rated AME: 15 - 30+ LPA (depending on airline, aircraft type, and experience)

1. Job PurposeResponsible for ensuring maximum availability and reliability of plant machinery, furnaces, electrical systems, utilities and other production equipment through preventive, predictive and breakdown maintenance.2. Key ResponsibilitiesMechanical Maintenance Maintenance of aluminium melting furnaces, holding furnaces and associated equipment. Maintenance of pumps, motors, gearboxes, conveyors, compressors, hydraulic and pneumatic systems. Handle breakdown maintenance and ensure minimum production downtime. Conduct preventive maintenance as per defined schedules. Identify recurring failures and implement permanent corrective actions. Maintain critical spare parts and recommend spares for procurement.Electrical Maintenance Maintenance of HT/LT electrical systems, MCC/PCC panels, control panels and distribution systems. Maintenance of motors, starters, VFDs, sensors and electrical control systems. Ensure proper functioning of DG sets, transformers and power distribution systems. Troubleshoot electrical breakdowns safely and quickly. Ensure electrical safety, earthing and compliance with applicable standards.Furnace & Process Equipment Ensure reliable operation of melting and alloy production equipment. Monitor furnace-related mechanical/electrical equipment. Coordinate with production during furnace breakdowns and shutdowns. Monitor critical parameters and identify early signs of equipment failure.Preventive Maintenance Prepare and execute daily, weekly, monthly and annual PM schedules. Maintain equipment history and breakdown records. Track MTBF, MTTR and machine availability. Analyse repeated breakdowns and implement RCA/CAPA.Utilities Maintenance of compressors, cooling-water systems, pumps, ventilation systems and other plant utilities. Monitor utility equipment performance and energy consumption.Safety & Compliance Follow LOTO and all plant safety procedures. Ensure maintenance work is carried out with proper PPE and safety permits. Ensure electrical and mechanical equipment are maintained in safe operating condition. Support statutory inspections and safety audits.3. QualificationEssential: Diploma / B.E. / B.Tech in Mechanical or Electrical Engineering. ITI with strong industrial maintenance experience may also be considered for Technician/Senior Technician positions.4. Required Skills Strong breakdown troubleshooting capability. Knowledge of preventive and predictive maintenance. Knowledge of PLC/VFD and industrial electrical systems. Knowledge of hydraulic and pneumatic systems. Ability to read electrical/mechanical drawings. Good knowledge of MS Excel and maintenance documentation. Strong team-handling and vendor-management skills. Ability to work in shifts and during emergency breakdowns.5. Preferred Candidate ProfilePriority should be given to candidates from:1. Aluminium alloy / aluminium recycling plants2. Foundry / melting plants3. Die-casting industries4. Automotive component manufacturing5. Steel / non-ferrous metal plants6. Heavy engineering manufacturing

As a Fitter Turner, you will play a vital role in the manufacturing process by working with various machines to create and repair metal parts. Your primary responsibilities will include:- Setting Up Machines: Prepare and set up turning machines and tools to ensure they are ready for operation, following technical specifications.- Producing Components: Use lathes and milling machines to shape and cut metal pieces according to the required design and measurements.- Quality Checking: Regularly inspect and measure parts to ensure they meet defined quality standards and specifications, identifying any defects.- Maintenance of Equipment: Perform routine maintenance and minor repairs on machines to keep them in good working condition, ensuring minimal downtime.- Collaboration: Work closely with other team members and departments to ensure efficient workflow and communicate any issues that may arise during production.Required skills and expectations for this role include:- Technical Knowledge: You should have a solid understanding of fitting and turning techniques, as well as the operation of relevant machinery.- Attention to Detail: A keen eye for precision is crucial, as you will be working with intricate parts where even small mistakes can lead to significant issues.- Problem-solving Skills: Ability to troubleshoot and resolve issues that arise during the manufacturing process effectively.- Physical Stamina: This job requires manual labor and the ability to stand for long periods, so physical fitness is important.- Basic Computer Literacy: Familiarity with basic computer operations may be beneficial for tracking production and maintaining records.

We are seeking a Mechanical Fitter to join our team in Baramati Midc, Pune. This role is suitable for candidates with 0 to 5 years of experience and requires at least a 10th-grade education.Key Responsibilities:- Assembly and Maintenance: You will assemble and maintain mechanical systems and machinery. EOT crane maintenance, Height work- Troubleshooting: Identify and resolve mechanical issues to ensure equipment operates efficiently. This includes conducting tests and inspections to determine problems.- Machinery Installation: Assist in installing new machinery and equipment in compliance with safety standards and specifications. Proper installation is crucial for long-term functionality.- Collaboration: Work closely with engineers and other technicians to support project goals. Effective communication will help in coordinating tasks and adhering to project timelines.Required Skills and Expectations:Candidates should have a strong understanding of mechanical systems and tools. Attention to detail is essential for executing precise work and ensuring safety measures. Basic problem-solving skills are necessary to troubleshoot issues as they arise. A readiness to learn and adapt in a fast-paced work environment is important for success in this role. Additionally, candidates should be effective team players, contributing positively to group efforts and maintaining a safe and productive workspace.

We are looking for a dedicated Production Operator to join our team in Pune, India. This entry-level position is perfect for individuals with 0 to 3 years of experience who are eager to learn and grow in a manufacturing environment.Key Responsibilities:1. Machine Operation: You will operate various production machines according to established procedures, ensuring they run smoothly and efficiently.2. Quality Control: It is your responsibility to monitor product quality throughout the manufacturing process, making sure that everything meets our standards and specifications.3. Equipment Maintenance: You will perform routine maintenance on machines and equipment, keeping them clean and in good working condition to prevent breakdowns.4. Production Reporting: You will keep accurate records of production numbers, including any issues that arise during the process, and report these to your supervisor.5. Safety Compliance: Following all safety regulations and guidelines is crucial. You will ensure that your work area is safe and that you are using equipment correctly to avoid accidents.Required Skills and Expectations:Candidates should have completed an Industrial Training Institute (I.T.I.) course. You must be able to work effectively as part of a team and communicate clearly with colleagues and supervisors. Basic problem-solving skills and attention to detail are important, as well as a strong willingness to learn and adapt. Reliability and punctuality are crucial for maintaining production schedules.

We are seeking an Aircraft Maintenance Engineer to join our team in Pune. This role is suitable for candidates with 0 to 6 years of experience and a minimum education level of 12th pass. As an Aircraft Maintenance Engineer, you will play a crucial role in ensuring the safety and efficiency of aircraft.Key Responsibilities:- Conduct Inspections: Regularly inspect aircraft components and systems to identify any wear, damage, or required maintenance. This is vital for ensuring all aircraft meet safety regulations.- Perform Maintenance and Repairs: Execute scheduled and unscheduled maintenance tasks on aircraft according to manufacturer specifications, ensuring airworthiness and reliability.- Troubleshoot Issues: Analyze and diagnose mechanical and electrical issues in aircraft systems. Quick and accurate problem-solving is essential to minimize downtime.- Maintain Records: Keep detailed maintenance logs and reports of all inspections and repairs performed. Accurate documentation is necessary for compliance and safety audits.- Collaborate with Teams: Work closely with other engineers and technicians to coordinate maintenance activities and ensure effective communication regarding ongoing projects.Required Skills and Expectations:Candidates should have strong attention to detail and a commitment to safety. Good problem-solving skills are essential to address technical issues effectively. Being a team player is crucial, as you will work alongside other professionals in a fast-paced environment. A basic understanding of aircraft systems and proficiency in using maintenance tools and software will be advantageous. Strong communication skills are also important for collaborating with team members and reporting findings.

Candidates should be a Mechanical engineering background with Industrial sales, or operation, or design or manufacturing experience

We are looking for a Maintenance Engineer to join our team in Viman Nagar, Pune. The ideal candidate will have 1 to 5 years of experience and hold a diploma in a relevant field. This role requires a male candidate and will involve working in the office.Key Responsibilities:1. Equipment Maintenance: Regularly inspect and maintain machinery and equipment to ensure they are operating efficiently. This will involve troubleshooting and repairing any faults.2. Preventive Maintenance: Implement a preventive maintenance schedule to minimize downtime. You will identify potential issues before they become serious problems, ensuring smooth operation.3. Documentation: Maintain accurate records of maintenance activities and repairs. This will help track maintenance history and assist in future planning.4. Collaboration: Work closely with other engineers and team members to enhance maintenance processes and share best practices. Effective communication is key to ensuring tasks are completed on time.5. Compliance: Ensure all maintenance work complies with safety standards and regulations. This is crucial for maintaining a safe workplace.Required Skills and Expectations:Candidates should have a solid understanding of mechanical and electrical systems. Strong problem-solving skills are necessary to diagnose and fix issues quickly. Good communication skills are important for teamwork. Candidates should be detail-oriented and organized, capable of managing multiple tasks in a fast-paced environment. A proactive attitude toward learning and adapting to new technologies is also expected.