Manufacturing Engineer Jobs

Process Optimization: / Troubleshooting: / Schedule production lines, coordinate with vendors for materials, and manage facility inventory.well reputed foundry company looking production engineer profile

Department: R&D / Production / Technical ServicesLocation: Vile-Bhagad MIDC, Tal: Mangaon, Dist: Raigad, MaharashtraSalary: Best in the IndustryExperience: Minimum 3-8 Years (preferred in rubber compounding and product development)Qualification: B.Tech / B.E. in Polymer Engineering / Rubber Technology / Chemical Engineering / Mechanical Engineering (with Rubber Industry experience)Role Objective:Lead end-to-end rubber product development, process standardization, production consistency, quality improvement, and cost optimization while ensuring customer and manufacturing requirements are achieved.Key Requirements:- Degree/Diploma in Rubber Technology / Polymer Engineering / Chemical Engineering or equivalent.- Experience in rubber compounding, formulation development, and manufacturing process control.- Hands-on experience in developing products from: Concept, Compound formulation, Prototype, Validation, Production scale-up, Commercial manufacturing.- Strong knowledge of: Natural Rubber (NR), EPDM, Development of sponge items viz. Gaskets etc.- Understanding of: Mixing and compounding, Extrusion, Compression molding, Vulcanization / curing systems.- Experience in compound optimization for performance and cost reduction.Key Responsibilities:Product Development:- Develop new rubber compounds and finished products as per customer requirements.- Optimize formulation for performance, manufacturability, and commercial viability.- Conduct trials, validation, and product qualification.Production Consistency:- Ensure consistent production output through process monitoring and standardization.- Control batch-to-batch variation and improve process capability.- Establish manufacturing parameters and process controls.Cost Saving & Continuous Improvement:- Drive cost reduction through compound optimization, alternative raw material qualification, yield improvement, waste and rejection reduction, and productivity enhancement.- Lead value engineering initiatives.Quality & Testing:- Define acceptance criteria and quality standards.- Analyze product failures and implement corrective actions.- Review and approve inspection and test reports.Employment Type: Full-Time

We are looking for a Senior Quality Engineer with 5 to 10 years of experience to enhance our quality assurance processes. This role is based in Solapur, India, and requires a proactive approach to ensure product quality and compliance with industry standards.Key Responsibilities:- **Quality Assurance Planning**: Develop and implement quality assurance plans to ensure that products meet specified standards and requirements.- **Testing and Evaluation**: Conduct comprehensive testing, including system audits and process evaluations, to identify and resolve quality issues effectively.- **Collaboration**: Work closely with cross-functional teams, including production and engineering, to ensure quality expectations are met throughout the product lifecycle.- **Documentation and Reporting**: Maintain precise documentation of testing procedures, results, and compliance standards, and prepare detailed reports for management review.- **Continuous Improvement**: Drive continuous improvement initiatives by analyzing quality metrics and recommending corrective actions to prevent recurrence of defects.Required Skills and Expectations:Candidates should hold a graduate degree and possess strong analytical, problem-solving, and project management skills. A working knowledge of quality tools and methodologies such as Six Sigma or ISO standards is essential. The ideal candidate should also have excellent communication skills, be detail-oriented, and be able to work collaboratively within a team. We are seeking a dedicated individual who is committed to maintaining high-quality standards and passionate about contributing to continuous enhancement of our product quality.

We are looking for a diligent and motivated individual to join our Production team in Chennai. The ideal candidate will have 1 to 3 years of experience in a production environment and hold a graduate degree. This role requires a male candidate and is full-time, working from the office.Key Responsibilities:1. **Production Oversight**: Monitor the production process to ensure efficiency and quality standards are met. You will be responsible for tracking progress and troubleshooting issues that may arise during operations.2. **Quality Control**: Perform regular quality checks on products to maintain high standards. This involves inspecting materials and finished products to ensure they meet specifications.3. **Team Collaboration**: Work closely with other team members to coordinate efforts in production. Good communication skills are crucial for ensuring the team works smoothly together.4. **Documentation and Reporting**: Maintain accurate records of production output and project details. You will regularly report to management on production metrics and other relevant data.Required Skills and Expectations:The ideal candidate must possess strong attention to detail and a problem-solving mindset. Basic understanding of production processes and machinery is essential, alongside the ability to work in a fast-paced environment. You should have effective communication skills to interact with team members and management. Being a team player with a positive attitude is highly valued in this position.

We are looking for an experienced Production Engineer to join our team! If you have expertise in managing production processes, ensuring quality control, and optimizing efficiency.Required Candidate profileMonitor and improve manufacturing processes for efficiencyCoordinate with teams to ensure smooth production flow

A working professional who combines technical expertise with sales skills to sell complex products, equipment, or solutions to customers. They act as a bridge between the technical team and the customer, helping clients understand how a product or service meets their needs.Key Responsibilities:-Drive sales activities across Guwahati and the Assam region.-Generate new business opportunities and develop customer relationships.-Manage CRM leads and convert opportunities into sales.-Visit existing and prospective customers to understand their requirements.-Conduct product presentations and support onsite trial machine demonstrations.-Prepare quotations, negotiate commercial terms, and close orders.-Coordinate with internal teams to ensure smooth order execution and customer satisfaction.-Monitor market trends, competitor activities, and identify growth opportunities.-Prepare and submit weekly and monthly sales reports.-Achieve assigned sales targets and contribute to business growth.

We are seeking an experienced Automobile Engineer to join our team in Germany. The ideal candidate will have 3 to 9 years of experience and a diploma in a relevant field. This full-time position requires working from the office, where you'll contribute to our innovative projects in the automotive industry.**Key Responsibilities:**- **Design Development**: Create and improve vehicle designs and components, ensuring they meet safety and performance standards.- **Testing and Analysis**: Conduct tests on prototypes to evaluate performance and make necessary adjustments based on analysis.- **Project Management**: Collaborate with cross-functional teams to deliver projects on time and within budget, ensuring alignment with overall goals.- **Compliance and Standards**: Ensure that all designs and products comply with legal and industry standards related to safety and emissions.- **Documentation**: Prepare detailed reports and technical documentation for the designs and testing phases, aiding in future development and compliance reviews.**Required Skills and Expectations:**The ideal candidate should possess strong problem-solving skills and be proficient in using engineering software for design and analysis. A solid understanding of automotive systems, including engines, transmissions, and overall vehicle dynamics, is essential. Excellent communication skills are required to work effectively with various teams and present technical information clearly. The candidate must be detail-oriented, with a readiness to stay updated on the latest industry trends and technologies. Being adaptable and able to work collaboratively in a team environment is also crucial for success in this role.

Production Engineer manages and optimizes the manufacturing of precision electric motors and motion control solutions. This involves tracking operational efficiency, allocating manpower, ensuring quality control, and driving continuous shop-floor improvements.Key Responsibilities:-Production Planning: Allocate manpower, balance assembly lines, and plan daily/weekly schedules to meet delivery commitments. Efficiency Monitoring: Track operation cycle times, identify production bottlenecks, and minimize machine downtime. Data Analysis: Record and analyze daily production data, specifically monitoring output, rework, scrap, and rejection rates. Quality Control: Ensure all manufactured parts meet strict engineering tolerances and standard operating procedures (SOPs).Shop-Floor Management: Enforce 5S, safety protocols, and waste reduction methods. Maintenance: Coordinate preventive and breakdown maintenance for production machinery. Cross-Functional Coordination: Collaborate with the Quality, Stores, and Maintenance departments to maintain a smooth production flow.Candidate Requirements Education: Diploma or B.E./ B.Tech in Mechanical or Production Engineering. Experience: Typically ranges from 2 to 8 years in the manufacturing sector, with some entry-level roles available. Technical Skills: Hands-on experience with CNC machines, plastic moulding, machine shops, and manufacturing operations. Continuous Improvement: Familiarity with lean manufacturing tools such as Kaizen, Poka-Yoke, and waste elimination

K9HR SOLUTIONS is looking for Moulding Engineer as Follows:A Sand Casting Moulding Engineer oversees the design, optimization, and production of sand molds and cores. They balance sand properties, gating systems, and machinery to prevent casting defects. Their primary goal is to ensure cost-effective, high-quality, and dimensionally accurate metal castings.Key ResponsibilitiesProcess Design & Optimization: Design gating, risering, and venting systems for sand molds to ensure proper metal flow and solidification.Sand Management: Monitor and adjust sand properties (e.g., green sand compactibility, permeability, moisture, and mold hardness) to prevent gas defects and sand erosion.Pattern & Core Development: Supervise pattern mounting, core-making, and assembly processes to maintain exact dimensional tolerances.Defect Analysis & Troubleshooting: Identify and resolve casting defects like shrinkage, porosity, sand inclusions, and misruns. Implement corrective actions and refine process parameters.Equipment Oversight: Set up, calibrate, and maintain automated and semi-automated molding machines (e.g., jolt-squeeze, flaskless molding)

We are seeking a Production Quality Engineer with 2 to 7 years of experience to ensure our products meet high-quality standards in our Jaipur office. The ideal candidate will have a strong educational background and a passion for quality in manufacturing.Key Responsibilities:- **Quality Control**: Monitor production processes to identify any issues that may affect product quality. This involves regular inspections and testing to ensure compliance with standards.- **Process Improvement**: Analyze production data to find areas where processes can be optimized. Propose and implement changes that enhance efficiency and reduce defects in the manufacturing process.- **Collaboration**: Work closely with production teams and other departments to resolve quality-related issues. Effective communication is essential to ensure everyone is aligned on quality goals.- **Documentation**: Maintain accurate records of inspections and quality checks. This includes reporting findings and providing recommendations for improvements based on data analysis.- **Training**: Educate staff on quality control procedures and best practices. This involves creating training materials and sessions to ensure that everyone understands their role in maintaining quality standards.Required Skills and Expectations:Candidates must have a degree in engineering or a related field. Strong analytical skills are essential to assess quality metrics and make data-driven decisions. Excellent communication and teamwork abilities are crucial, as the role involves working with various teams. Finally, a keen eye for detail and problem-solving skills will help drive continuous improvement in the production process.

Oversee electronics manufacturing operations, ensuring efficiency, quality, and on-time delivery.Manage production planning, inventory control, and supply chain logistics.5+ years exp. in electronics manufacturing management.

Role & responsibilitiesOversee and manage all on-site civil engineering aspects of interior fit-out projects.Interpret and implement architectural and interior design drawings.Ensure that all construction activities adhere to approved plans, specifications, and safety regulations.Conduct site surveys, inspections, and quality control checks.Manage and coordinate subcontractors and suppliers.Monitor project progress, identify potential delays, and implement solutions.Maintain accurate records of construction activities, materials, and labor.Collaborate with the project management team to ensure timely and within budget project completion.Prepare progress reports and documentation as required.

Production,Quality, PPC ,

We are seeking a dedicated Production Engineer to join our team in Chakan, Pune. The ideal candidate will have 2 to 5 years of experience and a graduate degree, and should be ready to collaborate in a dynamic environment to enhance production efficiency.Key Responsibilities:1. **Production Planning**: Develop and implement effective production schedules to meet customer demands while ensuring optimal use of resources and minimizing waste.2. **Process Improvement**: Analyze current manufacturing processes and suggest improvements to enhance efficiency, quality, and safety standards across the production floor.3. **Quality Control**: Monitor production timelines and quality metrics, ensuring that all products meet strict quality specifications before they reach customers.4. **Collaboration**: Work closely with other departments, such as design and quality assurance, to ensure seamless production flow and address any issues that may arise.5. **Documentation**: Maintain clear and accurate records of production procedures, adjustments, and outcomes to support continuous improvement initiatives.Required Skills and Expectations:Candidates must have strong analytical and problem-solving skills, along with a solid understanding of manufacturing processes. Excellent communication and teamwork abilities are essential for collaborating effectively with cross-functional teams. The ideal applicant will show initiative and take ownership of projects, driving them to completion while maintaining high standards. Experience in a similar role will be an advantage, and a proactive approach to learning and adapting in a fast-paced work environment is expected.

Knowledge of experience in - Design and Development Costing, Gear machine shop, Gear HOBBING. We are seeking a Costing Engineer with 2 to 5 years of experience to join our team in Chakan, Pune. The ideal candidate will have a background in engineering and a strong understanding of cost analysis to help ensure our projects are financially viable.Key Responsibilities:1. **Cost Estimation**: Prepare detailed cost estimates for projects by analyzing specifications, blueprints, and other relevant documentation to provide accurate forecasts.2. **Budget Management**: Monitor project budgets and expenses throughout the lifecycle of projects, ensuring adherence to financial targets and identifying cost-saving opportunities.3. **Data Analysis**: Use Excel and other software tools to analyze production costs and pricing, helping to develop strategies for competitive pricing and enhanced profitability.4. **Collaboration**: Work closely with project managers, engineers, and other stakeholders to gather necessary information for effective costing and ensure alignment on financial goals.5. **Reporting**: Create regular reports detailing cost performance metrics and present findings to management for informed decision-making.Required Skills and Expectations:The successful candidate should hold a relevant engineering degree and possess strong analytical skills to interpret data effectively. Proficiency in costing tools and software, particularly Excel, is essential. Strong communication abilities and a collaborative attitude are necessary to work well within teams. The candidate should be detail-oriented, motivated, and able to meet tight deadlines in a fast-paced work environment. Being proactive and adaptable to changes will contribute to success in this role.

We are looking for a Moulding Engineer based in Chakan, Pune, with 2 to 5 years of experience in the moulding process. The ideal candidate will be responsible for ensuring the effective operation and maintenance of moulding machines used in manufacturing.Key responsibilities include:1. **Mould Design and Development**: Collaborate with the design team to create and improve mould designs that enhance production efficiency and product quality.2. **Process Optimization**: Monitor and analyze the moulding process to identify areas for improvement and implement changes to reduce defects and waste.3. **Machine Operation and Maintenance**: Operate and maintain moulding machines, ensuring they function optimally and adhere to safety standards.4. **Quality Control**: Conduct regular inspections of moulded products to ensure they meet the required specifications and quality standards.5. **Troubleshooting and Problem-Solving**: Identify and resolve any production issues related to moulding processes quickly to minimize downtime and maintain productivity.Required skills and expectations include a strong understanding of moulding technologies, excellent analytical abilities for process improvements, and good communication skills to work effectively with cross-functional teams. Candidates must possess a high level of attention to detail and be capable of operating machinery safely and effectively. A graduate degree in engineering or a related field is required, and only male candidates will be considered for this full-time office-based position.

Responsibilities: Develop and implement the Quality Management System (QMS) in accordance withISO standards (e.g., ISO 9001). Establish and document quality policies, procedures, and work instructions. Conduct internal audits to assess compliance with QMS requirements and identifyareas for improvement. Coordinate external audits by regulatory agencies and certification bodies. Provide training to employees on QMS processes, standards, and qualityrequirements. Monitor and analyze QMS performance metrics to track progress and identifyopportunities for improvement. Investigate and resolve non-conformance issues and implement corrective andpreventive actions (CAPAs). Collaborate with cross-functional teams to promote a culture of quality andcontinuous improvement. Stay current with industry trends, regulatory changes, and best practices related toQMS.Requirements: Bachelors degree in Quality Management, Engineering, Business Administration, ora related field. X years of experience in quality management or quality assurance, preferably in aregulated industry. Strong knowledge of ISO standards and QMS principles (e.g., ISO 9001, ISO 13485). Experience in developing and implementing QMS documentation and processes. Proven ability to conduct audits and implement corrective actions. Excellent analytical and problem-solving skills. Effective communication skills, both verbal and written. Certification in Quality Management (e.g., Certified Quality Auditor, CertifiedQuality Engineer) is a plus.

Position: Automotive TechnicianLocation: GermanyRequirements: Diploma / Degree in Mechanical or Automobile Engineering Minimum 2 years experience Skills in Diagnostics, Maintenance & Servicing Experience in Commercial & Passenger Vehicles