Implementation Manager Jobs

Greeting From Vishakan Placement Service Walkin interview For Experience Candidate in Quality Management System (QMS) Manager PositionPosition: Quality Management System (QMS) ManagerExperience: Minimum 5 yearsIndustry: Automotive / ManufacturingPosition SummarySharpwire is looking for an experienced QMS Manager to lead and strengthen our Quality Management System, ensure compliance with IATF 16949 requirements, and drive continuous improvement across manufacturing and quality processes.The ideal candidate must have a minimum of 5 years of hands-on IATF 16949 audit experience, with strong exposure to internal audits, customer audits, certification audits, corrective actions, defect reduction, and quality performance monitoring.Key ResponsibilitiesQMS & IATF 16949* Lead and maintain the companys IATF 16949 Quality Management System.* Ensure compliance with applicable customer-specific requirements and quality standards.* Plan and conduct internal QMS and process audits.* Lead preparation for IATF, customer, and certification-body audits.* Ensure timely closure and effectiveness verification of audit findings and non-conformities.* Maintain QMS documentation, procedures, work instructions, records, and quality objectives.Defect Reduction & Quality Improvement* Drive initiatives to reduce internal and external defects, rejection, rework, scrap, and customer complaints.* Monitor quality KPIs and identify areas requiring immediate corrective or preventive action.* Lead Root Cause Analysis, 8D, CAPA, 5-Why, Fishbone, and other problem-solving activities.* Establish and monitor defect-reduction targets for production and supporting functions.* Work closely with Production, Engineering, Maintenance, and Supply Chain teams to eliminate recurring quality issues.Quality Trend Analysis* Track quality defects and trends by product, process, machine, shift, customer, supplier, and defect type.* Develop and maintain Pareto analysis, trend charts, rejection reports, and quality dashboards.* Identify recurring and emerging quality trends and initiate preventive actions before issues become major problems.* Present quality performance, trends, risks, and improvement actions to management.* Use data-driven analysis to identify opportunities for continuous improvement and defect prevention.Customer Quality* Monitor and manage customer complaints and quality concerns.* Ensure effective and timely response to customer complaints, including 8D reports and corrective actions.* Track customer PPM, complaints, returns, and other customer quality indicators.* Work with relevant teams to prevent recurrence of customer issues.Continuous Improvement* Drive PDCA and continual improvement activities throughout the organization.* Establish quality improvement projects focused on defect reduction, process capability, and customer satisfaction.* Promote a strong zero-defect and prevention-oriented quality culture.* Monitor the effectiveness of corrective and preventive actions.Team & Cross-Functional Leadership* Lead and develop the Quality team.* Train employees on QMS requirements, quality procedures, problem-solving, and audit readiness.* Coordinate with cross-functional teams to resolve quality issues.* Ensure accountability for quality objectives and improvement actions across departments.Required Qualifications & Experience* Bachelors degree/Diploma in Mechanical, Electrical, Industrial Engineering, Quality, or related field.* Minimum 5 years of hands-on IATF 16949 audit experience - mandatory.* Strong experience in IATF 16949 QMS implementation, maintenance, and auditing.* Experience handling IATF certification audits, customer audits, and internal audits.* Strong knowledge of:* IATF 16949* ISO 9001* Core Tools - APQP, PPAP, FMEA, MSA, SPC* 8D / CAPA / Root Cause Analysis* Process and Product Auditing* Control Plans* Statistical and trend analysis* Proven track record of reducing defects, rejection, scrap, rework, and customer complaints.* Strong analytical and problem-solving skills.* Good communication and leadership skills.* Proficiency in Excel and quality data analysis/reporting.Preferred* Automotive manufacturing experience.* Experience with wire, cable, harness, metal forming, stamping, or related manufacturing processes.* Certified IATF 16949 Internal Auditor / Lead Auditor.* Experience with customer-specific requirements and major automotive customer audits.* Experience implementing measurable quality improvement projects.Key Performance Indicators (KPIs)The QMS Manager will be responsible for driving measurable improvement in:* Internal rejection / defect PPM* Customer PPM* Customer complaints* Scrap and rework* Repeat defects* Audit non-conformities* Corrective-action closure effectiveness* Process audit compliance* Supplier quality performance* Cost of Poor Quality (COPQ)* Overall QMS effectivenessSuccess in This RoleSuccess will be measured by the ability to maintain a robust IATF 16949 QMS, achieve strong audit performance, identify quality trends early, eliminate recurring defects, reduce overall rejection and customer complaints, and establish a culture of prevention and continuous improvement at Sharpwire.If you want, I can also make this more aggressive and KPI-driven for hiring, including specific targets such as 30% defect reduction, zero repeat customer complaints, audit score targets, and PPM reduction.Job Shift : DAY (8.15AM -6.00PM) , NIGHT( 9.00PM -7.15AM)/ Sunday Week-offNo of openings: 3Age limit: Till 35 Immediate Joiner Must Work Location: THANDALAM MANNUR VILLAGE Papparapakkam Tiruvallur Candidate nearby Location: Sriperumbedur,kanchipuram Vellavedu,Veppampattu,Sevvapet,thiruninravur,poonamallee,thirumazhisaiInterested Candidate For Job Please Call immediately & Share your Resume Pradeep HR +91 955 195 2508 (jobvpservice@gmail.com)

Greeting From Vishakan Placement Service !!!! Walkin interview For Experience Candidate in Quality Management System (QMS) Manager Position. Industry: Electrical /Automotive Manufacture IndustryPosition: Quality Management System (QMS) ManagerExperience: Minimum 5 +yearsPosition SummarySharpwire is looking for an experienced QMS Manager to lead and strengthen our Quality Management System, ensure compliance with IATF 16949 requirements, and drive continuous improvement across manufacturing and quality processes.The ideal candidate must have a minimum of 5 years of hands-on IATF 16949 audit experience, with strong exposure to internal audits, customer audits, certification audits, corrective actions, defect reduction, and quality performance monitoring.Key ResponsibilitiesQMS & IATF 16949* Lead and maintain the companys IATF 16949 Quality Management System.* Ensure compliance with applicable customer-specific requirements and quality standards.* Plan and conduct internal QMS and process audits.* Lead preparation for IATF, customer, and certification-body audits.* Ensure timely closure and effectiveness verification of audit findings and non-conformities.* Maintain QMS documentation, procedures, work instructions, records, and quality objectives.Defect Reduction & Quality Improvement* Drive initiatives to reduce internal and external defects, rejection, rework, scrap, and customer complaints.* Monitor quality KPIs and identify areas requiring immediate corrective or preventive action.* Lead Root Cause Analysis, 8D, CAPA, 5-Why, Fishbone, and other problem-solving activities.* Establish and monitor defect-reduction targets for production and supporting functions.* Work closely with Production, Engineering, Maintenance, and Supply Chain teams to eliminate recurring quality issues.Quality Trend Analysis* Track quality defects and trends by product, process, machine, shift, customer, supplier, and defect type.* Develop and maintain Pareto analysis, trend charts, rejection reports, and quality dashboards.* Identify recurring and emerging quality trends and initiate preventive actions before issues become major problems.* Present quality performance, trends, risks, and improvement actions to management.* Use data-driven analysis to identify opportunities for continuous improvement and defect prevention.Customer Quality* Monitor and manage customer complaints and quality concerns.* Ensure effective and timely response to customer complaints, including 8D reports and corrective actions.* Track customer PPM, complaints, returns, and other customer quality indicators.* Work with relevant teams to prevent recurrence of customer issues.Continuous Improvement* Drive PDCA and continual improvement activities throughout the organization.* Establish quality improvement projects focused on defect reduction, process capability, and customer satisfaction.* Promote a strong zero-defect and prevention-oriented quality culture.* Monitor the effectiveness of corrective and preventive actions.Team & Cross-Functional Leadership* Lead and develop the Quality team.* Train employees on QMS requirements, quality procedures, problem-solving, and audit readiness.* Coordinate with cross-functional teams to resolve quality issues.* Ensure accountability for quality objectives and improvement actions across departments.Required Qualifications & Experience* Bachelors degree/Diploma in Mechanical, Electrical, Industrial Engineering, Quality, or related field.* Minimum 5 years of hands-on IATF 16949 audit experience - mandatory.* Strong experience in IATF 16949 QMS implementation, maintenance, and auditing.* Experience handling IATF certification audits, customer audits, and internal audits.* Strong knowledge of:* IATF 16949* ISO 9001* Core Tools - APQP, PPAP, FMEA, MSA, SPC* 8D / CAPA / Root Cause Analysis* Process and Product Auditing* Control Plans* Statistical and trend analysis* Proven track record of reducing defects, rejection, scrap, rework, and customer complaints.* Strong analytical and problem-solving skills.* Good communication and leadership skills.* Proficiency in Excel and quality data analysis/reporting.Preferred* Automotive manufacturing experience.* Experience with wire, cable, harness, metal forming, stamping, or related manufacturing processes.* Certified IATF 16949 Internal Auditor / Lead Auditor.* Experience with customer-specific requirements and major automotive customer audits.* Experience implementing measurable quality improvement projects.Key Performance Indicators (KPIs)The QMS Manager will be responsible for driving measurable improvement in:* Internal rejection / defect PPM* Customer PPM* Customer complaints* Scrap and rework* Repeat defects* Audit non-conformities* Corrective-action closure effectiveness* Process audit compliance* Supplier quality performance* Cost of Poor Quality (COPQ)* Overall QMS effectivenessSuccess in This RoleSuccess will be measured by the ability to maintain a robust IATF 16949 QMS, achieve strong audit performance, identify quality trends early, eliminate recurring defects, reduce overall rejection and customer complaints, and establish a culture of prevention and continuous improvement at Sharpwire.If you want, I can also make this more aggressive and KPI-driven for hiring, including specific targets such as 30% defect reduction, zero repeat customer complaints, audit score targets, and PPM reduction.Job Shift : DAY (8.15AM -6.00PM) , NIGHT( 9.00PM -7.15AM)/ Sunday Week-offNo of openings: 6Age limit: Till 40Immediate Joiner Must Work Location: THANDALAM MANNUR VILLAGE Papparapakkam Tiruvallur Candidate nearby Location: Sriperumbedur , Kanchipuram, Poonamallee, Vellavedu,Veppampattu,Sevvapet,thiruninravur,poonamallee,thirumazhisai

As an IT Sales Manager, you will play a crucial role in driving sales and expanding our client base in the technology sector. Your role will involve working from home and requires a proactive approach to sales strategies.Key Responsibilities:- Develop Sales Strategies: Create effective sales strategies to target new clients and retain existing ones. This includes identifying market trends and customer needs to enhance sales performance.- Build Client Relationships: Establish and maintain strong relationships with clients to foster trust and create long-term partnerships. Regular communication and follow-ups will be essential in this process.- Conduct Market Research: Analyze the competitive landscape and market dynamics to identify opportunities for growth. Staying informed about industry trends will help tailor your sales approach effectively.- Prepare Sales Reports: Track sales metrics and prepare comprehensive reports to present to management. These reports will offer insights into performance and areas for improvement.- Work Collaboratively: Collaborate with the marketing and technical teams to align sales strategies with product offerings and ensure a clear understanding of product features and benefits.Required Skills and Expectations:- A Master's degree, Post Graduate Diploma, MBA/PGDM, or M.Tech is necessary, demonstrating a solid educational foundation in business or technology.- Candidates should have 1 to 3 years of experience in IT sales, showcasing a history of meeting or exceeding sales targets.- Strong communication and interpersonal skills are critical, as you will need to articulate technical concepts clearly and engage effectively with clients.- Ability to work independently and manage time efficiently is essential since this is a part-time, work-from-home role.- Proficiency in using sales and CRM software will be advantageous in tracking leads and sales activities effectively.

JOB PURPOSEThe Manager QA/QC will be responsible for managing the complete Quality Assurance and Quality Control function of the organization.The role will ensure that raw materials, manufacturing processes, finished products and dispatches consistently meet approved drawings, specifications, quality standards, customer requirements and applicable compliance requirements.The Manager QA/QC will establish robust quality systems, lead the QA/QC team, control rejection and rework, manage customer complaints and audits, drive root-cause analysis and CAPA, and continuously improve product and process quality.KEY RESPONSIBILITIESA. Quality Assurance - QA Develop, implement and maintain the company's Quality Management System (QMS). Prepare and implement Quality Policies, SOPs, Work Instructions and Inspection Standards. Establish quality objectives, procedures and KPIs. Conduct internal quality and process audits. Ensure compliance with applicable customer and quality requirements. Review and improve existing quality systems and processes. Establish preventive quality controls to minimize defects. Maintain proper quality documentation and records. Promote a Right First Time and zero-defect culture.B. Quality Control - QCManage and monitor quality at all stages:Incoming Material In-Process Finishing Assembly Final Inspection Packing Dispatch Establish inspection standards and checklists. Ensure incoming material inspection. Ensure in-process inspection at critical manufacturing stages. Conduct and monitor final inspection. Verify dimensions, tolerances, appearance, functionality and surface finish. Ensure products conform to approved drawings, samples and specifications. Ensure non-conforming products are properly identified, segregated and controlled.C. Raw Material & Incoming Quality Develop incoming inspection procedures for:o Brasso Irono Zinco Aluminiumo Steelo Bought-out componentso Packaging materials Verify material specifications, dimensions and quality. Monitor supplier quality performance. Coordinate with Purchase and Stores regarding rejected materials. Maintain supplier rejection records and quality performance data.D. In-Process Quality ControlMonitor quality during: Casting Forging Pressing CNC/VMC machining Drilling Tapping Grinding Buffing Polishing Finishing Plating Powder Coating PVD Assembly Responsibilities include: First-piece approval Process inspection Critical dimension monitoring Process parameter control Defect identification Rejection/rework control Process improvementE. Final Inspection & Product ReleaseEnsure finished products are inspected before dispatch for: Dimensions Tolerances Appearance Surface finish Plating/coating Colour/shade Assembly Functionality Strength/performance Packing Labelling QuantityEnsure products are released for dispatch only after meeting defined quality requirements.CUSTOMER QUALITY MANAGEMENT Handle customer quality complaints professionally and promptly. Investigate customer complaints and identify root causes. Prepare 8D, CAPA and Root Cause Analysis reports. Coordinate customer inspections and quality audits. Maintain customer complaint records and trend analysis. Ensure corrective actions are implemented within agreed timelines. Verify effectiveness of corrective actions. Communicate customer-specific requirements to Production and other departments. Monitor customer satisfaction and recurring quality issues.ROOT CAUSE ANALYSIS & CAPALead quality problem-solving using: 5 Why Analysis Fishbone / Ishikawa Pareto Analysis 7 QC Tools Process Analysis Failure AnalysisResponsibilities: Identify root cause rather than only treating symptoms. Raise NCRs for significant non-conformities. Define corrective and preventive actions. Assign responsibility and target dates. Monitor CAPA closure. Verify effectiveness. Prevent recurrence of defects.SUPPLIER QUALITY MANAGEMENT Evaluate and monitor supplier quality performance. Establish supplier quality standards. Conduct supplier audits where required. Monitor supplier rejection and defect trends. Issue Supplier Corrective Action Requests. Work with Purchase for supplier development. Support approval of new suppliers from a quality perspective. Maintain supplier quality scorecards.CUSTOMER & PRODUCT SPECIFICATION CONTROL Ensure availability of approved drawings and specifications. Ensure production works only against approved drawings/samples. Control drawing revisions and specification changes. Ensure customer-specific requirements are communicated to concerned departments. Establish product inspection standards for new products. Participate in NPD, sampling and product development activities.SURFACE FINISH & PLATING QUALITYEnsure quality control of: Polishing Buffing Electroplating Nickel Chrome Brass finishes Antique finishes PVD Powder Coating Other decorative/protective finishesMonitor defects such as: Scratches Dents Colour variation Uneven finish Stains Peeling Poor adhesion Plating defects Surface roughness Coating thickness variationTESTING & CALIBRATION Establish product testing requirements. Ensure availability of appropriate testing equipment. Monitor calibration of measuring and testing instruments. Maintain calibration schedules and records. Ensure measuring instruments are suitable for their intended application. Coordinate external testing/laboratory requirements where necessary.QUALITY TEAM MANAGEMENT Lead the QA/QC team effectively. Define responsibilities and targets for QC Inspectors. Allocate inspection manpower according to production requirements. Train QC personnel on inspection methods and quality standards. Conduct regular quality meetings. Evaluate team performance. Identify training requirements. Develop quality awareness among production employees. Ensure discipline and consistency in inspection practices.PRODUCTION & CROSS-FUNCTIONAL COORDINATIONWork closely with: Production PPC Tool Room NPD/Sampling Purchase Stores Finishing Maintenance Dispatch MerchandisingThe Manager QA/QC should act as a bridge between Quality and Production, ensuring that quality issues are resolved at the process level without unnecessarily affecting production schedules.QUALITY MIS & REPORTINGPrepare and review: Daily Quality Reports Incoming Inspection Reports In-Process Inspection Reports Final Inspection Reports Rejection Reports Rework Reports NCR Reports CAPA Reports 8D Reports Customer Complaint Reports Supplier Quality Reports Quality KPI Reports Monthly Quality MISAnalyse trends for:Rejection Rework Scrap Customer Complaints Supplier Defects Process Defectsand initiate improvement actions.REQUIRED TECHNICAL SKILLSThe candidate should have strong knowledge of: Builder/Architectural Hardware Manufacturing Brass, Iron, Zinc, Aluminium & Steel Products Engineering Drawings GD&T / Basic Tolerances Measuring Instruments AQL & Sampling Incoming/In-Process/Final Inspection Surface Finishing Plating & Coating QMS ISO 9001 Internal Auditing 7 QC Tools SPC Root Cause Analysis CAPA 8D Problem Solving Supplier Quality Calibration Process Auditing Quality DocumentationCOMPUTER SKILLS Advanced MS Excel Quality MIS Quality Dashboards Data Analysis Pareto Charts Rejection Trend Analysis MS Word PowerPoint ERP/MIS softwareEDUCATIONAL QUALIFICATIONB.Tech / B.E. / Diploma in: Mechanical Engineering Production Engineering Industrial Engineering Metallurgy Quality Engineering or related technical discipline.Certification in ISO 9001, Six Sigma, Quality Auditing or Quality Management will be an advantage.EXPERIENCE8-12 years of relevant experience, preferably in: Builder Hardware Architectural Hardware Brass Hardware Iron Hardware Zinc Hardware Aluminium Hardware Sanitary Hardware Metal Components Engineering Manufacturing Export-oriented ManufacturingExperience in international customer requirements, export quality standards and customer audits will be preferred.

We are seeking an experienced Quality Manager to ensure our products meet high-quality standards in Coimbatore, India. The ideal candidate will have 6 to 12 years of experience and a background in quality management.Key Responsibilities:1. Quality Assurance Oversight: Develop and implement quality assurance policies and procedures to maintain product quality throughout the production process.2. Team Leadership: Lead and mentor a team of quality assurance professionals, providing guidance and support to enhance their skills and performance.3. Data Analysis: Analyze quality data to identify trends, areas for improvement, and potential risks, enabling informed decision-making for better quality outcomes.4. Compliance Management: Ensure compliance with industry standards and regulatory requirements, conducting regular audits and inspections to assess adherence.5. Customer Liaison: Collaborate with customers to address quality-related issues and implement corrective actions as needed, ensuring customer satisfaction remains a priority.Required Skills and Expectations:The ideal candidate should have a degree and several years of experience in quality management. Strong leadership and communication skills are essential for collaborating with various teams. A detail-oriented mindset and analytical skills are necessary for data analysis. The candidate should be proactive in problem-solving and capable of driving quality improvement initiatives. Experience with quality management systems and familiarity with quality assurance tools is advantageous. The position requires working in an office environment, and male candidates are preferred for this role.

The VP of Sales and Advisory Transformation Practice will report directly to the SVP Transformation. Key performance indicators (KPIs) for this role will include revenue growth, successful deal closures, CRM implementation success, client satisfaction scores, and team development metrics.

Required - Manager Quality (Fabrication Industry)Name of the Plant : Poshs Cinoti Pvt Ltd. ( Form Work Fabrication & Permanent Structure )Plant Address :GAT NO.832,836,838,864,865,866, Asawali,Taluka-Khandala, Dist-Satara, Maharashtra Important Skills - Quality Manager (Formwork Fabrication Industry)A)Quality Management Systems & Compliance1)Strong expertise in ISO 9001, IATF 16949, APQP, PPAP, Six Sigma2)Ability to define, implement, and enforce in-house quality procedures, standards, and documentation3)Welding & Fabrication Quality Expertise4)In-depth knowledge of fabrication processes and welding methodology (WPS, PQR)5)Understanding of latest welding techniques and inspection requirementsProblem Solving, CAPA & Customer Complaint Handling6)Root Cause Analysis, corrective & preventive action (CAPA) effectiveness review7)Ownership of internal & external customer complaints and rejection reductionB)Quality Control, Inspection & Calibration Management1)Monitoring incoming, in-process & final inspections as per Quality PlanControl of measuring instruments, calibration schedules & inspection reports before dispatch2)Leadership, Training & Continuous Improvement3)Ability to lead and supervise 6-8 quality engineers/technical staff4)Identifying training needs, driving continuous improvement, and facilitating quality culture across productionC)Very important Skill : 1)Knowledge of RDSO certification & documentation Experience : 10 to 15 years in Heavy Fabrication, Auto, Auto Ancillaries, Tier I Salary Range : CTC 07.00 to 10.00 Lac / YearSend resume on : plntmgrhr01@poshscinoti.com or whats app on 9960300915Dhanaji Deshmukh Plant HR Manager ( 9960300915 )

Position Title: Operations ManagerCompany - Falcon ElectricFalcon Electric specializes in end-to-end wire harness manufacturing and critical interlinking solutions for switchgear systems. The company is committed to delivering reliable, safe, and high-performance products that meet the quality expectations of leading switchgear OEMs through robust manufacturing processes, continuous improvement, and operational excellence.________________________________________Job Title - Operations ManagerDepartment - OperationsReports To - Managing Director / Director

We are seeking a Quality Manager with 5 to 10 years of experience to ensure high-quality standards in our projects. This role is fully remote and requires an I.T.I. qualification.Key Responsibilities:1. Quality Assurance Oversight: Develop and implement quality control processes to ensure products meet established standards. Regularly review processes and outcomes to identify areas for improvement.2. Team Leadership: Manage a team of quality inspectors, providing training and support. Foster a collaborative environment where team members are encouraged to share insights and ideas.3. Data Analysis: Analyze quality data and metrics to track performance, identify trends, and propose actionable solutions to enhance quality. Present findings to management with recommendations for improvement.4. Compliance Management: Ensure that all quality processes comply with industry standards and regulations. Keep abreast of changes in regulations and adjust practices accordingly.5. Customer Interaction: Maintain open lines of communication with customers regarding quality concerns. Address issues promptly and ensure customer feedback is integrated into quality procedures.Required Skills and Expectations:The ideal candidate should possess strong analytical skills and attention to detail to ensure meticulous quality control. Excellent communication and interpersonal skills are essential for effective team management and customer relations. A proactive attitude towards problem-solving and the ability to work independently in a remote setting is crucial. Experience in process improvement methodologies, such as Six Sigma or Kaizen, is highly desirable.

Quality Oversight & ApprovalApprove analytical results, reports, protocols, methods, specifications, and other quality-related documents.Ensure the integrity, accuracy, and regulatory compliance of analytical and laboratory data.Provide final quality approval for services and deliverables provided to clients.2. Quality Management System (QMS)Establish, maintain, and continuously improve the Quality Management System (QMS) in compliance with GMP, GLP, and applicable regulatory guidelines.Ensure effective management of SOPs, deviations, CAPAs, change controls, OOS/OOT investigations, complaints, and risk management activities.Ensure data integrity compliance in line with ALCOA+ principles across all systems and documentation.3. Regulatory ComplianceEnsure compliance with applicable global regulations and guidelines, including FDA, EMA, ICH, WHO, and ISO standards.Lead, support, and manage regulatory inspections, client audits, and third-party audits.Act as the primary quality point of contact for regulatory authorities, auditors, and customers.4. Systems & ValidationReview and approve validation activities including analytical method validation, equipment qualification (IQ/OQ/PQ), computer system validation (CSV), and process validation.Ensure laboratory instruments, electronic systems, and software meet regulatory and data integrity requirements.5. Training & Quality CultureEnsure appropriate training of personnel on GMP, GLP, SOPs, and quality best practices.Promote and sustain a strong quality culture and compliance mindset across the organization.6. Risk Management & Continuous ImprovementIdentify potential quality and compliance risks and implement effective mitigation strategies.Drive continuous improvement initiatives to enhance regulatory compliance, operational efficiency, and service quality.

Plastic Injection Molding Knowledge Exp 10 to 15 Yrs salary range 9 to 11 LPA location chakan, Pune handling all type of quality issues audit customer supplier customer visit. Audit face etc. Plant and execute internal audits, Supplier audits and MIS compliances audits manage clients complaints etc.

JD - Sr. Manager/ Chief ManagerLocation: Gonde, NashikExperience: 12-15 Years of experience in similar type of industry, Pharmaceutical or Perfume glass Bottle Manufacturing industryQualification: B.E/ B.Tech, Graduate from science background with MBA from reputed university.Role & Responsibilities Review performance against operating plans and approve necessary improvements or corrective actions. Production Planning, Scheduling &Control. Oversee the entire production cycle, from raw material management to finished goods. Enhance in the targeted percentage of glass-to-glass yield & OEE over the last year. Minimize the Production losses, monitor yield, Improvement projects and ensure adherence to established production stan monitor Sops, and best practices. Review and approve departmental budgets, ensuring effective control of spending. Optimize labor, material utilization, and engineering efficiency. Ensure availability and maintenance of required production resources and equipment. Develop, implement, and maintain reporting systems related to production performance and metrics. Provide timely and accurate reports on production activities, deviations, and achievements. Ensure strict compliance with GMP, safety regulations, and good housekeeping standards. Monitor adherence to all company policies, procedures, and regulatory requirements. Drive a safety-focused culture across the production team. Improve product quality and quantity within planned schedule while maintaining cost. Define duties, responsibilities, and accountability for all direct subordinatesMaintain effective communication within the department and with cross-functional stakeholders. Support the implementation of manufacturing and organizational plans aligned with the Operations Master Plan. Collaborate effectively with internal managers and external stakeholders to meet production goals. Lead continuous improvement initiatives to enhance productivity, reduce waste, and improve operational efficiency Perform additional duties as assigned with flexibility and willingness.Important Competencies Production Planning Execution Implementation of TPM & GMP lean manufacturing implementation by using of TPM Kaizen 5S Project ManagementKey Skills Strategic Production Planning SAP- S 4 HANA Team Management Proficient in Excel Time Management & analytical skillsProcess Knowledge

Seeking a Quality Manager with 5-7 years of experience in Gandhidham, Gujarat. The ideal candidate will oversee quality control, testing procedures, engineering processes, and product quality to ensure compliance with standards. Responsibilities include implementing QMS, identifying areas for improvement, and managing a team to achieve quality goals. A graduate degree and strong communication skills are required for this role.

Quality Manager 17025 for NABL Lab in IMT Manesar Gurgaon MCPSKey Responsibilities:Maintain and update the laboratorys quality system in line with ISO/IEC 17025 and NABL requirements.Perform analytical tests in the laboratory and ensure accuracy, reliability, and validity of results.Assist in administrative duties to maintain smooth laboratory workflow.Obtain and renew laboratory certifications, handle audits, and maintain compliance documentation.Implement and monitor QA/QC programs and assignments.Ensure adherence to standard operating procedures (SOPs).Train, guide, and support laboratory staff in quality practices and compliance.Promote good customer service practices by ensuring timely and reliable delivery of results.Required Skills & Knowledge:Strong knowledge of ISO systems with proven track record of implementation in laboratories.Familiarity with NABL accreditation processes.Hands-on experience with GC (Gas Chromatography) and HPLC (High-Performance Liquid Chromatography) will be an added advantage.Excellent problem-solving, analytical, and organizational skills.Ability to manage audits, documentation, and continuous quality improvement.

Job Profile of Quality Assurance Manager Qualification -Graduate /Diploma engineer Work experience- with 5-8 years hands on experience in handling Quality Assurance of EPDM extrusion/Parts or Engineering components in an automobile company/ancillary Should be well versed with IATF 16949:2016 system implementation and maintenance of system Hands on experience in process control activities Should be able to maintain discipline on the shop floor. Hands on experience in root cause analysis and taking corrective action and leading the CFT team Good communication skill, should feel at ease in communicating with the customer Will be responsible for maintaining Zero defect supplies to customers. Will be responsible for implementation and maintenance of 5 S activities Will be responsible for daily report analysis, corrective actions and Quality MIS to management Should have hands on experience in controlling the external and internal PPM by taking effective corrective action and monitoring of the same Should have leadership qualities and be able to build team Should have process-oriented approach and be able to improve /help improve process capabilities Should be well versed with automobile OEMs system requirement and approach.

This is purely a contractual position (CTH) based at Raipur and deputed on clients office for full time basis. Candidate should be from HR background and should have good understanding related to HR compliance and more. Responsible for doing research and understanding the industry, competitive analysis, and various distribution models for the client. Responsible for overall implementation of HR Scope of work at client place. Responsible for training on implementation of scope at client place. Responsible for taking appropriate decisions for clients business, whenever required, with the help of PC. Solving challenges/problems/ bottlenecks/gaps at clients place with the help of PC. Coordinating with Principal consultant for timely deliverable. Responsible for getting timely feedback from client documented and ensuring client satisfaction. Conducting various employee engagement activities at clients place and ensuring high team motivation and retention of clients manpower. Maintain a healthy relationship with clients and ensure retention post completion.

Job Description:- Focus expertiseMajor exposure to welding and welded components and products and related testing and expertiseGood command in Welding like TIG,MIG,GMA,FMA Welding process, Preparing WPS , Finding the defect on welding and correcting it.Preparing welding procedure and testing follow the standard of EN-15085,ISO-5817,ISO-14002-3,ISO-15607Detect the welding defect and drive welding quality with vendor and adhereing to WPSExpertise in welding inspections through Radiography, visual inspections ,performed LPT testing / DPT testingAbility to work closely with welders and driving product quality1. To ensure all the products, processes and suppliers (Internal and External) are in line with organisational guidelines/SOP laid for quality and QMS and certification requirements2. To Investigate, analyze and resolve supplier quality problems by conducting audits, analyzing defect trends and leading continuous improvement projects.3. Liasioning with various certifying agencies to organise and achieve various product/compliance certifications4. Handling Third Party / Customer Inspections Experience:-experience in QA/QC with promising experience in spearheading Supplier & Product Quality as well as handling ISO 9001:2008/2015 QMS Audits and other audits / certifications for OEM environment with in-depth exposure of EPDM/Rubber components, welding, die-casting, fabrication, tooling, injection molding, various surface treatment process viz. galvanisation, powder coating, nickel plating, etc.Responsibilities (A) Supplier / Product Quality :-1. Work with Purchase/VD to ensure supplier performance is regularly reported and that appropriate and timely corrective actions are implemented2. Handle Incoming, In-process and Final inspections

Knowledge of Finance & Accounts Activities-GST/TDS, Income tax .Exp with ERP implementation environment handling application, data, Platform& infrastructure integration services.Exp applying methodologies for ERP- Priority Software implementations.Required Candidate profileMonthly/QLY/Yearly closing process understanding.Audit Coordination Statutory/Internal Audit