Control Engineer Job Vacancies in Vadodara

ROLE OVERVIEWThe Quality Control Engineer will be responsible for incoming material inspection, in-process quality checks, and finished laminate testing across the CCL manufacturing plant. This role requires deep familiarity with IPC standards, raw material specifications, and laminate test procedures.KEY RESPONSIBILITIESIncoming Material Inspection- Inspect and qualify incoming glass fabric: weave style, GSM, thickness, width, defects (filling breaks, knots, weave distortions)- Test incoming ED copper foil: thickness (oz/m), surface quality, oxidation, bond strength- Inspect prepreg for resin content, flow, gel time, and volatile content- Maintain raw material test records and release/rejection documentationIn-Process Quality Control- Monitor treater line output: resin pickup %, volatile content, and prepreg flow characteristics- Check dimensional parameters during press operation: thickness tolerance, bow, twist- Track press cycle parameters and correlate with quality outcomesFinished Laminate Testing- Conduct peel strength testing per IPC-TM-650 methods- Perform Tg measurement using DSC (Differential Scanning Calorimetry) or TMA- Measure dielectric constant (Dk) and dissipation factor (Df) per IPC standards- Conduct thermal stress testing (solder float / thermal shock) for reliability evaluation- Test surface finish, dimensional accuracy, and appearance inspection of finished laminatesSystems & Documentation- Maintain quality records, SPC charts, COA (Certificate of Analysis), and NCR logs- Drive corrective and preventive actions (CAPA) for recurring defects- Support customer audits, IPC conformance documentation, and lab accreditation activitiesCANDIDATE PROFILEExperience- 3-10 years in quality control in CCL, PCB, composites, or laminates manufacturing- Hands-on lab testing experience with laminate and copper foil characterisation- Working knowledge of IPC standards (IPC-4101, IPC-TM-650 test methods)Technical Skills- Proficiency with instruments: DSC, TMA, peel tester, LCR meter, impedance analyser- Knowledge of glass fabric weave classifications and defect identification- Familiarity with UL 94, IPC-4101C, and halogen-free laminate standards- Experience with SPC tools and quality management systems (ISO 9001)Education- B.E. / B.Tech in Chemical, Polymer, Electronics, or Materials EngineeringCritical Requirement: Must be familiar with: IPC-4101 laminate specifications, IPC-TM-650 test methods, and standard lab procedures for peel, Tg, Dk/Df, and thermal stress testing.REPORTING & LOCATIONReports To Plant Head / QA ManagerLocation Plant Site / QC Lab, India

Job SummaryWe are looking for a Jr. Engineer with a background in Civil, Integrated Water Management (IWM), or Environmental Engineering and 13 years of experience in design, engineering, and technical report preparation. The role involves supporting planning and design activities for water, wastewater, and environmental infrastructure projects, along with preparation of technical and statutory reports.________________________________________ Key Responsibilities Assist in design and engineering of civil and environmental infrastructure projects (water supply, wastewater treatment, storm water, reuse systems, etc.). Prepare and review design calculations, drawings, and technical documents. Support preparation of Detailed Project Reports (DPRs), feasibility studies, and engineering reports. Prepare technical notes, BOQs, cost estimates, and tender-related documents. Assist in hydraulic calculations, process sizing, and layout planning. Coordinate with multidisciplinary teams (process, mechanical, electrical, instrumentation). Support compliance with environmental norms, guidelines, and statutory requirements. Assist in data collection, site visits, surveys, and analysis for project planning. Incorporate review comments and maintain proper documentation control.________________________________________ Required Qualifications ME / BE in Civil / Environmental / IWM Engineering. 13 years of experience in design, engineering, and report preparation. Knowledge of water & wastewater treatment systems, environmental infrastructure, and civil design basics. Proficiency in MS Excel, MS Word, AutoCAD, and basic engineering software/tools. Good technical writing and documentation skills.________________________________________ Preferred Skills Experience in preparing DPRs, EIA-related documents, and project reports. Familiarity with CPHEEO, CPCB, MoEF&CC guidelines. Basic knowledge of hydraulic modeling or process design tools is an advantage. Strong analytical and coordination skills.

Designation:- Project EngineerInterested Candidate can apply and contact on 7623888872Location: VadodaraDepartment: Project Management / EngineeringReports To: Project ManagerEmployment Type: Full-timeJob SummaryWe are looking for a skilled Project Engineer with 46 years of experience tosupport the design, execution, and commissioning of process plants,manufacturing facilities, and industrial projects in the FMCG, Beverage, Food,Dairy, and Chemical industries.The ideal candidate will assist the Project Manager in executing projects fromconcept to completion, ensuring they are delivered on time, within budget, and incompliance with industry standards.Key Responsibilities- Project Support & Coordination Assist the Project Manager in developing project scopes, schedules, andbudgets. Coordinate design, procurement, installation, and commissioning activities. Monitor project progress, prepare status reports, and highlight potential risksor delays. Maintain accurate documentation of drawings, specifications, and approvals.- Engineering & Technical Support Prepare and review engineering drawings, layouts, and technical documentsfor processing lines, packaging lines, piping systems, utilities, HVAC, andcleanroom facilities. Support the design and selection of process equipment, utilities, andautomation systems. Ensure compliance with GMP, FDA, ASME, ISO and other relevant standardsduring project execution. Assist in plant layout optimization and utility integration.- Vendor & Stakeholder Coordination Support vendor selection, procurement, and technical evaluations. Liaise with suppliers, contractors, and internal teams to ensure timely deliveryof materials and equipment. Attend site meetings and progress reviews with stakeholders.- Site Supervision & Commissioning Supervise installation, testing, and commissioning activities under theguidance of the Project Manager. Participate in Factory Acceptance Tests (FAT), Site Acceptance Tests(SAT), and performance trials. Ensure equipment and systems meet quality, safety, and operationalrequirements before handover.- Compliance & Safety Support Follow health and safety protocols (OSHA, HSE standards) on site. Assist in identifying risks and implementing mitigation measures. Maintain records for regulatory and quality audits.Required Qualifications & SkillsEducation: Diploma / bachelors degree in mechanical, Industrial, Chemical, DairyTechnology, Food Technology, Electrical Engineering, or related field.

URGENT REQUIREMENT QUALITY ENGINEEREDUCATION : DIPLOMA / BE MECHANICALEXPERIENCE : 1-3 YEAR IN QC AUTOMOTIVE INDUSTRY PREFERREDLOCATION : SAMLAYA MANJUSAR GIDC VADODARASALARY : 20-30 K DEPEND ON INTERVIEWAPPLY : tpo.vp2017@gmail.comCALL : 8306133342

WE ARE HIRING ON URGENT BASE POST : QC ENGINEEREDUCATION : DIPLOMA/ BE MECHANICALEXPERIENCE : 0-2 YEAR LOCATION : MANJUSAR GIDC VADODARASALARY : 12-20 K DEPEND ON INTERVIEWAPPLY : tpo.vp2017@gmail.comCALL : 8306133342

WE ARE HIRING ENGINEERPOST : QC ENGINEEREDUCATION : DIPLOMA / BE MECHANICALINDUSTRY : FABRICATION SHEET METALSALARY : 20-30 K DEPEND ON INTERVIEWAPPLY : tpo.vp2017@gmail.comCALL : 8306133342

ROLE OVERVIEWThe Instrumentation & Control Engineer will be responsible for the installation, calibration, maintenance, and optimisation of all measurement and control instruments across the CCL plant. This role is critical to maintaining precise temperature profiles, pressure cycles, and resin curing parameters that directly impact laminate quality.KEY RESPONSIBILITIESInstrumentation Maintenance & Calibration- Maintain, calibrate, and troubleshoot all field instruments: temperature sensors (RTD, thermocouples), pressure transmitters, flow meters, level sensors, and analytical instruments- Ensure all instruments are within calibrated range and traceable to national/international standards- Manage instrument inventory, spare parts, and calibration recordsProcess Control - CCL Specific- Monitor and optimise temperature profiles in press cycles (ramp, cure hold, cool-down phases)- Control and fine-tune pressure cycles during multi-daylight press lamination- Maintain resin curing parameter records and ensure process consistency across batches- Oversee drying oven temperature zones in the treater / impregnation lineControl System Support- Support PLC and DCS/SCADA system for process variable monitoring and alarming- Interface with electrical and automation teams for integrated control loop performance- Participate in new project commissioning: instrument selection, hook-up, loop testing, and start-upDocumentation & Compliance- Maintain as-built instrument index, loop diagrams, and calibration certificates- Support internal and external audits with accurate instrumentation recordsCANDIDATE PROFILEExperience- 4-10 years in instrumentation and process control in a manufacturing environment- Ideal background: continuous process industries - chemicals, laminates, textiles, plastics, or glass- Experience controlling temperature-critical process equipment (ovens, presses, reactors, boilers)Technical Skills- Proficiency with HART, FOUNDATION Fieldbus, or Profibus communication protocols- Hands-on calibration of pressure, temperature, flow, and analytical instruments- Familiarity with DCS systems (Honeywell, ABB, Yokogawa) or advanced PLC-based control- Working knowledge of control loop tuning (PID)Education- Diploma / B.E. / B.Tech in Instrumentation Engineering, Electronics & Instrumentation, or Control EngineeringCritical Requirement: Preferred: Candidates from laminates, textiles, or chemical process industries who understand temperature-sensitive curing environments.REPORTING & LOCATIONReports To Senior Electrical Engineer / Plant HeadLocation - Plant Site, India