Commissioning Engineer Jobs in India

Independently carry out the erection, commissioning and servicing of water treatment plants, UF Modules, RO plants, DM Plants and sewage treatment plants.ONLY CANDIDATES WITH EXPERIENCE IN WATER AND WASTEWATER TREATMENT INDUSTRY NEED TO APPLY. Should be living in Chennai and should own a two-wheelerKey responsibilitiesConduct pre-order / pre-installation visits to evaluate site conditions for the proper installation of the water treatment plants and sewage treatment plantsCarry out on-site erection and commissioning of the WTP, RO and STP.Give training to customers on the proper operation and maintenance activitiesComplete mandatory service visits and attend to the service requests from customers on a timely basisRequired Experience, Skills and QualificationsEducation : Graduates Diploma-ITI HoldersExperience: 2-5 years in Erection, Commissioning and Servicing of water treatment plants, UF Modules, RO plants, DM Plants and sewage treatment plantsMust possess a valid two-wheeler driving license with a good driving record.Physical fitness to work in challenging site conditionsWillingness to work in flexible schedules including weekends and holidays

Job Title: Testing EngineerOverviewWe are looking for a dedicated and technically skilled Testing Engineer to join our dynamic team in Ahmedabad, Gujarat.This role involves testing, commissioning, and maintenance of electrical and protection systems used in substations, switchgear, transformers, and industrial power networks - both in India and abroad.________________________________________Key Responsibilities- Execute testing and commissioning of protection relays, switchgear panels, transformers, and control systems.- Perform primary and secondary injection relay testing using advanced test kits (OMICRON, Megger, ISA, etc.).- Carry out specialized tests including Tan Delta, Contact Resistance Measurement (CRM), Breaker Timing, CT/PT testing, and HV/LV/HT panel verification.- Analyze and optimize relay coordination, logic, and protection settings as per design requirements.- Prepare and review detailed test reports and documentation.- Provide technical support and troubleshooting during commissioning and site operations.- Collaborate with project and field teams to ensure smooth and timely project execution.- Ensure adherence to safety, quality, and compliance standards during all testing activities.________________________________________Job Skill Requirements1. Education: Minimum Diploma in Electrical Engineers, Instrumentation, or Electronics & Telecommunication (ETC).2. Experience: Freshers with a strong technical background or minimum 1 year of experience in testing & commissioning, relay testing, or power system protection.3. Travel: Must be willing to travel extensively - up to 75% of the time - for site work within Pan India.4. Domain Exposure: Preference for candidates with experience or interest in substation testing, relay coordination, or electrical commissioning projects.5. Gender Requirement: Only male candidates are eligible for this position.________________________________________Required Qualifications & Skills- B.E./B.Tech or Diploma in Electrical Engineer / Electronics / Instrumentation / Power Systems Engineering.- Hands-on experience with OMICRON, Megger, ISA, SCOPE, or Crest testing kits.- Familiarity with Tan Delta, CRM, Breaker Timing, CT/PT, HV/LV Testing.- Strong understanding of relay protection schemes and power system components.- Knowledge of protection logic, coordination, and panel wiring diagrams.- Excellent analytical, problem-solving, and communication skills.- Self-motivated with the ability to work independently under minimal supervision.________________________________________Preferred Skills- Experience in Relay Testing Engineers, relay coordination, or HV panel testing.- Knowledge of electrical safety practices and system protection standards.- Ability to handle multiple testing projects efficiently under tight schedules.________________________________________ Location: Ahmedabad, Gujarat Travel: Pan India Contact: +91 76000 96674________________________________________

- Key Responsibilities:1. Design and develop electrical systems: The engineer will be responsible for designing and developing electrical systems for various projects, ensuring they meet industry standards and client requirements.2. Conduct testing and troubleshooting: They will conduct testing on electrical systems to ensure functionality and troubleshoot any issues that may arise during the testing phase.3. Prepare technical reports and documentation: The engineer will be required to prepare technical reports documenting the design process, testing results, and any modifications made to the electrical systems.4. Collaborate with team members: They will collaborate with other team members, including project managers and other engineers, to ensure projects are completed on time and within budget.- Required Skills and Expectations:1. Strong knowledge of electrical engineering principles: The candidate should have a solid understanding of electrical engineering principles and how they apply to real-world projects.2. Proficiency in AutoCAD and other design software: Experience with AutoCAD and other design software is essential for this role to create detailed electrical designs.3. Good communication skills: The engineer should have good communication skills to effectively collaborate with team members and communicate technical information to non-technical stakeholders.4. Ability to work independently and in a team: The candidate should be able to work independently on tasks assigned to them while also being a team player and collaborating with other team members effectively.

Were Hiring! Role: Testing & Commissioning / Relay Testing Engineer Company: NS Engineers Office Location: Ahmedabad, Gujarat (with site travel) Work Location: Pan India About the Role Join our power-system experts and work on cutting-edge testing & commissioning projects for substations, switchgear and industrial networks. Key Responsibilities Conduct testing & commissioning of protection relays, switchgear panels, transformers and control systems. Perform primary & secondary injection relay testing with OMICRON, Megger and other advanced kits. Execute specialised tests: Tan Delta, CRM, Breaker Timing, CT/PT, HV/LV & HT panel testing. Optimise relay coordination, settings and protection logic; prepare detailed test reports. Commission HV panels & substation automation; provide on-site technical support. Ensure full compliance with safety and quality standards. What Were Looking For Education: B.E./B.Tech in Electrical Engineering Experience: Minimum 6 Month (ideal 03 years) in testing & commissioning / power-system protection Core Skills Tan Delta, CRM, Breaker Timing, Isolator, CT/PT testing Insulation Resistance Test (IR Test) Winding Resistance Test Turns Ratio Test (TTR Test) Magnetizing Current Test BDV (Breakdown Voltage) Test of Transformer Oil Vector Group Test Polarity and Phase Relation Test Load and Temperature Rise Test Relay coordination & protection logic HV panel commissioning HT/LV/Switchgear & Transformer testing ISA / SCOPE / Crest kits OMICRON Test Universe Substation automation Soft Skills Strong problem-solving ability Clear communication Teamwork mindset Willingness to travel Ready to power up your career? Send your CV to hr1@nsengineers.co.in Contact: 7600057502 Subject: Relay Testing Engineer NS Engineers

Candidate needs to have experience in Elevator /Lifts with knowledge in commissioning ,wiring and troubling shooting . He will also have to manage a team of 10-15 engineering to daily reporting. Bike & DL mandatory.

Installation & commissioning of machinery/equipmentRoutine maintenance, inspection, and troubleshootingAttend breakdown calls and ensure minimal downtimeProvide technical support to customers on-site & remotelyPrepare accurate service reports and documentationCoordinate with internal teams for parts, repairs, and solutionsEnsure adherence to safety, quality, and company standardsMaintain strong customer relationships and professionalismWillingness to travel as per service requirementsExperience in after-sales/service engineering preferred

* Develop and modify PLC programs (e.g., Siemens, Fanuc etc)* Integrate PLCs with sensors, machines, robots, and supervisory systems* Test control systems in-house and on-site* Support installation and commissioning of automation systems * Diagnose and resolve issues in PLC-controlled systems* Update and maintain documentation, backups, and version control* Work with cross-functional teams including electrical, mechanical, and software engineers* Provide technical support during project development and after deployment

We're seeking an experienced Installation Engineer to oversee the installation of electrical DC and AC systems for our solar plant projects. The ideal candidate will have 3-5 years ofexperience in solar plant installation and will be responsible for ensuring the successful execution of electrical systems.Key Responsibilities: Install and commission electrical DC and AC systems, including:- MMS (Mounting Structures) and module installation- Inverter and transformer installation- 33 kV transmission line (TL) and bay work- SEM (Substation Equipment Management) and electrical equipment installation Ensure compliance with electrical safety standards and company policies Troubleshoot and resolve installation issuesCollaborate with project teams to ensure project timelines are metConduct quality checks to ensure installation meets specificationsRequirements: 3-5 years of experience in solar plant installation, with a focus on electrical DC and AC systems Strong knowledge of electrical engineering principles and solar plant designExperience with electrical installation, including MMS, inverters, and transformersExcellent problem-solving and communication skills Ability to work at heights and in outdoor environmentsPreferred Skills: Experience with solar plant installation software and tools Knowledge of relevant safety regulations and standards, such as IEC and IEEEExperience with testing and commissioning of electrical systems Strong attention to detail and quality focus

Installation & Commissioning of Electronic Weighbridge at the customer site. Giving online software support to customers. Coordination; maintaining cordial relationship with the customers. Fault Finding; Repair of the Electronic Weighbridge. Attend service calls from customers & provide telephonic support. Job involves travelling. Training will be provided. Immediate Joiner.

Retrofitting relay, testing of transformer and potential transformer, air circuit breakers and vacuum circuit breakers electrical test to ensure their proper operation and safety.

Job Title: Service & Installation Engineer / Service & Commissioning Engineer / Field Service & Audit Engineer (The specific title will depend on the primary focus of the role)Department: Service / Engineering / Technical Support / Quality AssuranceReports To: Service Manager / Engineering Manager / Project Manager / Quality ManagerLocation: Nashik, Maharashtra, India (This role typically involves a mix of office work, site visits within Nashik and surrounding areas, and potentially travel to client locations depending on the industry and company).Job Summary:We are seeking a highly skilled and versatile engineer to handle a combination of service, installation, commissioning, and audit responsibilities for our [Specify Industry/Equipment/Systems, e.g., industrial machinery, HVAC systems, electrical equipment, medical devices, automation systems] in the Nashik region. The ideal candidate will possess a strong technical background, excellent troubleshooting skills, and a commitment to ensuring the proper installation, functionality, and performance of our products/systems, as well as verifying compliance with standards and specifications. This combined role is crucial for ensuring customer satisfaction, product reliability, and adherence to quality parameters.Key Responsibilities (Combined):Installation & Commissioning:Oversee or perform the installation of new equipment/systems at client sites, ensuring proper setup, connections, and alignment with specifications.Conduct thorough commissioning procedures, including testing, calibration, and configuration to ensure systems operate according to design parameters.Provide training to clients on the operation and maintenance of installed equipment.Service & Maintenance:Provide on-site and remote technical support to clients for troubleshooting, diagnosing, and repairing equipment malfunctions.Perform routine preventive maintenance to ensure optimal performance and minimize downtime.Manage service calls, prioritize urgent issues, and ensure timely resolution of client problems.Auditing & Performance Verification:Conduct technical audits of installed equipment/systems to verify compliance with performance standards, safety regulations, and client requirements.Use specialized testing equipment and procedures to measure performance parameters (e.g., efficiency, output, emissions).Prepare detailed audit reports, documenting findings, identifying areas for improvement, and recommending corrective actions.Documentation & Reporting:Maintain accurate records of all installation, commissioning, service, and audit activities.Prepare detailed reports, including service reports, commissioning checklists, audit findings, and performance assessments.Ensure all documentation complies with company standards and regulatory requirements.Customer Interaction:Communicate effectively with clients to understand their needs, provide technical guidance, and ensure satisfaction with our products and services.Maintain professional relationships with clients and build trust in our technical expertise.Technical Expertise & Continuous Improvement:Stay updated with the latest technological advancements in the relevant field.Contribute to the improvement of installation, service, and audit procedures.Provide feedback to engineering and product development teams based on field experience.

Position Installation Engineer TraineeKindly check the job description added below, also be prepared with the theoretical concepts to give the best in the interview.Job Overview:We are looking for a motivated Installation Engineer Trainee with a strong foundation in Linux and network administration. This entry-level position is ideal for individuals with an IT Diploma or BTech in IT who are eager to enhance their technical skills in a dynamic environment. In this role, you will assist with the installation, configuration, and maintenance of our systems and networks, ensuring they operate efficiently and effectively.Key Responsibilities:Assist in the installation and configuration of hardware and software systems.Perform routine maintenance and system checks on Linux-based servers.Monitor network performance and address any issues or outages promptly.Work closely with senior engineers to troubleshoot and resolve technical problems.Maintain detailed documentation of installation processes and system configurations.Key Requirements:Basic experience with Linux operating systems and command-line tools.Understanding of network administration concepts and protocols (e.g., TCP/IP, DNS, DHCP).Strong problem-solving abilities and aptitude for troubleshooting hardware and software issues.Good communication skills and the ability to collaborate effectively within a team.Enthusiasm for learning and adapting to new technologies.Qualifications:IT Diploma or BTech in IT/CSE , or equivalent technical education. Field Visits and Client Location Training:Conduct field visits to install and configure systems at client locations.Provide on-site client training, ensuring users are proficient with new systems and software.Duration : 6 months

Ultratech Engineering P Ltd. is an established mechanical engineering projects construction organization based in Chennai. We are looking for fresh engineers to be employed as site supervisors at various locations/various states. Please send your resume with a contact number to (WhatsApp). This is a permanent on-site job and an excellent opportunity to build a career with mechanical projects construction, like fabrication and erection of structural.

Commissioning Engineer Roles and Responsibilities:Test and commission elevator systems post-installation for functionality and spec compliance.Verify integration of mechanical, electrical, and control systems (motors, wiring, controllers, safety).Diagnose and fix issues with speed, leveling, doors, and emergency systems.Master controllers (HPmont, Mona Drive, Arkel) for setup and troubleshooting.Program and calibrate controls for ride quality, efficiency, and safety.Prepare commissioning reports with test results and certifications.Support initial operations, addressing post-commissioning issues.

Role- Installation and commissioning of water treatment plants* On site installation and commissioning of ETP/STP/RO or any other water treatment plant* Site inspection for installation of WTPs* Piping S.S, M.S, UPVC, PVC, P.P, HDPE* Understand and execute the civil drawings and work as per drawings* Understand and execute plant layout as per the process flow diagrams* Estimate material quantity for BOQ as per site condition and drawings* Planning work at site* Client interaction as & when needed* Familiar in Commissioning and troubleshooting of All type WTP and WWTP* Operating and fine tuning the operation parameters of WTP And WWTP* Follow site protocols* Coordinate with the QA/QC team in all quality related aspects* Maintain the Quality Documents* Daily reporting to the ManagerCritical Competencies for the Job Functional:* Technically sound knowledge of engineering & water treatment plants* Perfect understanding of drawings & process flow diagrams* Should act as a good team leader for all site activities* Should be able to handle the Customer on site* Should be able to understand, communicate and resolve the problems to ensure timely delivery of the job* Documentation* Qualification : DME/DEE or BE Electrical/ BE Mechanical/BE CivilContact Person- Deepak- 7757087059ID- deepak.vijayamgmt@gmail.com

Job Title: Commissioning Engineer Effluent Treatment Plant (ETP)Department: Operations & MaintenanceLocation: Anywhere in India Job Purpose:To ensure smooth commissioning, operation, and maintenance of Effluent Treatment Plants (ETPs), ensuring treated water meets environmental standards. The role involves on-site coordination, chemical handling, troubleshooting, and client interaction for successful handover and continued performance.Key Responsibilities:1.. Commissioning Activities:Conduct pre-commissioning checks, flushing, testing, and trial runs.Execute system start-up, monitor parameters, and stabilize operations.2. Operational Management:Operate the plant as per standard procedures and ensure compliance with environmental norms.Record daily operational parameters like flow, pH, COD, BOD, TSS, etc.Maintain chemical dosing systems and ensure chemical stock levels.3. Maintenance & Troubleshooting:Perform preventive and breakdown maintenance of mechanical/electrical/chemical systems.Identify and resolve operational issues and report major faults.Key Skills Required:Knowledge of wastewater treatment processes (physical, chemical, biological).Familiarity with lab instruments and chemical analysis techniques.Hands-on experience in ETP start-up, troubleshooting, and O&M.Qualifications:Education: Diploma / B.Sc / M.Sc in Chemistry / Environmental Science / Industrial Chemistry / Chemical Engineering or related field.

Job Purpose:To provide expert-level testing, commissioning, maintenance, and service support for transformers, ensuring optimal performance and compliance with industry standards.Key Responsibilities:Testing & Diagnostics:Conduct electrical tests such as insulation resistance, winding resistance, transformer turns ratio (TTR), and vector group tests.Perform advanced diagnostic tests, including Tan Delta, Partial Discharge (PD), and Sweep Frequency Response Analysis (SFRA).Analyze test results and provide recommendations for corrective actions.Commissioning:Supervise the installation and commissioning of transformers at project sites.Execute functional and performance tests in compliance with IEC and IEEE standards.Ensure seamless integration of transformers into the power grid.Service & Maintenance:Perform on-site troubleshooting and fault diagnosis for transformers.Undertake repairs, retrofitting, and preventive maintenance activities.Replace defective components and ensure restored operational efficiency.Technical Documentation:Prepare test reports, commissioning logs, and service records.Maintain documentation for regulatory compliance and client reference.Client Support:Provide technical support to clients during and post-project implementation.Train client teams on proper operation and maintenance of transformers.Safety & Compliance:Adhere to safety protocols and quality assurance standards during testing and commissioning.Conduct risk assessments and ensure workplace safety.Key Skills:Expertise in transformer testing, commissioning, and servicing processes.Proficiency in handling equipment like TTR meters, SFRA analyzers, and Tan Delta testers.Strong problem-solving and analytical skills.In-depth knowledge of industry standards such as IEC 60076 and IEEE C57.

Candidates having experience in CHP Commissioning (Coal handling plant) in 600 & above Mega Watt Thermal Power Plants are preferred.

o Perform site-specific testing and commissioning of electrical equipment, including transformers, switchgear, circuit breakers, protection relays, bus bars, cables, and more.o Execute tests for both Low Tension (LT) and High Tension (HT) equipment in compliance with national and international standards.o Coordinate and supervise electrical pre-commissioning, commissioning, and start-up activities for power plants and substations.

PROTECTION RELAY ENGINEER POWER SYSTEM PROTECTION EXPERT A skilled Protection Relay Engineer plays a vital role in ensuring power system reliability, safety, and fast fault clearance across substations and industrial power networks. Key Skills & Expertise Relay Testing & Commissioning (Numerical / Static / Electromechanical) Distance, Differential, Overcurrent & Earth Fault Protection Transformer, Generator & Motor Protection Relay Configuration, Setting & Coordination Secondary Injection Testing (OMICRON / FREJA / MEGGER) CT / PT Testing & Verification SCADA & Substation Automation Fault Analysis & Troubleshooting Commissioning: 11kV / 33kV / 66kV / 132kV & Above Preventive & Breakdown Maintenance Industries Served Power Transmission & Distribution Substations & Switchyards Renewable Energy (Solar / Wind) Industrial Utilities WhatsApp & Calling: 76000 96674 Website: www.powertest.in

Bachelors degree in Electrical/Electronics/Instrumentation Engineering Degree from an accredited college or university.Minimum 3 years of experience in BMS Engineering, Testing & CommissioningSCADA, PLC, BMS engineering/programming experience preferred.Strong understanding of OPC, BACnet, Modbus protocol to include IP, ETH and MS/TPDesign, development, commissioning, and testing of Building automation systemsBMS/SCADA/HMI graphic screen developmentIO Loop test and Functional testBasic knowledge on SQL database programming.Excellent problem-solving and troubleshooting skillsProviding technical support to clientsExperience with current trends in automation and instrumentation to be able to select and implement modern controls architecturesStrong communication and organizational skills