CNC Engineer Jobs in India

The Plant Manager / Plant Head holds total operational, technical, and team accountability for our Light Engineering Factory (safety, quality, production hours, manpower, and dispatch). This role leads all shop-floor operations from raw material receipt through CNC processing, press working, roll forming, welding, surface finishing, and dispatch- ensuring on-time, in-full delivery of components consiting of round/ square tube structures, sheet metal components, and greenhouse structures, cold room, panels etc.Primary Mandate & Leadership Profile: We require a proven technical leader and system-builder who combines strong organizational leadership with a solid shop-floor engineering foundation. The role does not require daily manual machine operation, but demands past hands-on experience and deep mechanical grounding to inspect setups, troubleshoot complex tool/die/feed issues, and practically demonstrate correct machine practices to junior engineers, supervisors, and operators when required.In addition to day-to-day operations, the Plant Manager is responsible for establishing operational systems from the ground up: drafting Standard Operating Procedures (SOPs), designing shop-floor log sheets, setting up Daily Production Report (DPR) formats, and driving a culture of continuous improvement.Key Responsibilities1. Production Machinery Governance & Operations Machinery Performance & OEE: Govern shop-floor machinery performance-driving maximum throughput, availability, and precision across CNC press bending, power press, iron worker, CNC plasma cutting, laser cutting, shearing machines, CNC auto drill, CNC auto bending, and roll forming lines (C/Z purlins & sheeting profiles). Setup, Tooling & Cycle-Time Optimization: Oversee tooling and die selection, press brake bend deductions, clearance settings, feed rates, and cycle-time optimization. Guide teams through quick changeover methodologies (SMED) and preventive maintenance to eliminate unplanned downtime. Practical Floor Mentorship: Act as the technical authority on the shop floor; step in during critical changeovers or complex jobs to guide and demonstrate proper setup, alignment, and troubleshooting techniques to shift supervisors and machine operators. Production Planning & Hour-Based Execution: Set, schedule, and drive daily, weekly, and monthly production targets measured in Production Hours and Machine Utilization; track shift-wise (Shift A/B/C) planned hours vs. achieved hours and course-correct bottlenecks in real time. Nesting & Material Yield: Enforce plate, sheet, and coil nesting optimization to maximize raw material yield, minimize drop-off scrap, and balance machine run times. Tooling & Calibration Compliance: Enforce a documented calibration and preventive maintenance schedule for all CNC tooling, press dies, shear blades, measuring instruments, and gauges.2. Operational System Building & SOP Development SOP Architecture: Author, formalize, and implement Standard Operating Procedures (SOPs) for all manufacturing processes, machine startups, tool changeovers, and safety interlocks. Shop-Floor Documentation: Design, standardize, and roll out shift-wise operator logbooks, machine breakdown logs, first-piece inspection sheets, and tool wear registers. Process Standardization: Establish standard cycle times and Standard Allowed Hours (SAH) for recurring fabricated parts and assemblies to enable precise capacity planning.3. Quality Assurance & Compliance (QA/QC & EHS) Dimensional Precision: Enforce strict tolerance checks, cut squareness, edge quality, bevel angles, bend angles/springback control, and hole/slot geometry against approved fabrication drawings; mandate first-piece inspection on every job setup or sheet/coil change. Roll Forming & Tube Quality: Verify hole pitch, profile geometry, web/flange depth, camber, and sweep on roll-formed sections (C/Z purlins, roof/wall sheets, decking profiles) and tubular structures. Welding Standards: Enforce welder qualification (WPS/WPQ) per IS/AWS standards, joint fit-up inspection, and NDT hold points (Visual, DPT, UT as applicable) with joint-to-welder traceability. Surface Preparation & Finishing: Oversee surface cleanliness (shot blasting or mechanical cleaning), primer/paint application, dry film thickness (DFT) compliance, and adhesion testing. (Hot-dip galvanizing oversight is managed via dedicated supervisory protocols where applicable). EHS & Safety Enforcement: Champion Environment, Health & Safety (EHS) at every workstation-safe handling of fumes, laser/plasma eye safety, crane and rigging protocols, and machine guarding on presses and shearing equipment; conduct daily safety toolbox talks and near-miss reporting. Statutory & ISO Compliance: Maintain ISO 9001 compliance (and ISO 14001/45001 standards), lead internal audits, and ensure compliance with the Factories Act, labor regulations (PF/ESI, contract labor licenses), and safety norms.4. Cross-Functional Coordination & Design Review Engineering Drawing Alignment: Review fabrication and shop drawings using AutoCAD (2D/3D) and Autodesk detailing/mechanical software (such as Autodesk Advance Steel or Autodesk Inventor); coordinate with design and detailing teams to resolve drawing queries (RFIs) and verify CNC cut-data/unfolded blank sizes before release to the shop floor. Supply Chain & Stores Alignment: Coordinate with procurement and stores for timely raw material (coils, plates, tubes, hardware) staging to prevent machine starvation.5. Cost & Commercial Management Operational Budget Ownership: Own plant operating costs-labor, consumables (gas, nozzles, tooling, blades, paint), maintenance, utilities, and overtime. Continuous Improvement: Spearhead Lean, 5S, Kaizen, and waste-reduction initiatives to systematically decrease cost per production hour. Management Reporting: Report plant performance, budget vs. actual variance, scrap recovery, and CAPEX proposals to senior management.Reporting Architecture & GovernanceThe Plant Manager builds the reporting framework, reviews operational logs with department leads, and authors executive summaries for senior leadership: Shop-Floor Logs (Designed by Plant Manager, Maintained by Supervisors): Shift-wise production output logs, planned vs. actual production hours, machine downtime and OEE logs, scrap and material consumption sheets, and daily quality inspection logs. Operational Reviews (Daily / Weekly): Daily cross-functional morning meetings (Production, Quality, Maintenance, Stores, Dispatch) to review yesterdays hours vs. target, resolve shift bottlenecks, and review NCR/CAPA logs. Management & Executive Dashboard (Authored by Plant Manager): Monthly plant performance deck (production hours achieved, machine utilization, rework percentage, scrap yield, EHS score), plant budget-vs-actual variance, and Quarterly Business Review (QBR) presentations. Client & Dispatch Reports (Approved by Plant Manager): Inspection call notices, Third-Party Inspection (TPI) coordination, Material Test Certificates (MTC), and On-Time In-Full (OTIF) dispatch reports.Key Deliverables / KPIs Production Hours Achievement: Shift-wise and monthly target hours achievement vs. planned schedule (>= 95% adherence). Machine Utilization & OEE: Availability, Performance, and Quality across CNC cutting, press bending, and roll forming lines (OEE >= 80% on bottleneck machines). SOP & Documentation Rollout: Timely establishment and active adoption of SOPs, shift logs, and quality check-sheets across all production bays. First-Time-Right (FTR) Quality: Rejection and rework rate = 95% on-time dispatch against project order schedules. Safety & Compliance: Zero Lost Time Injury Frequency Rate (LTIFR) and 100% statutory compliance under the Factories Act and labor laws.Required Qualifications Education: B.E. / B.Tech in Mechanical, Production, or Industrial Engineering (or Diploma in Engineering with extensive relevant experience and proven shop-floor leadership). Experience: Minimum 15 years in manufacturing operations, with substantial experience in light engineering, sheet metal manufacturing, structural steel / secondary PEB fabrication, round/square tube structures, or greenhouse structure manufacturing. Leadership Experience: Minimum 5 years in a plant leadership role (Plant Manager, Plant Head, Factory Manager, or Operations Head) with operational budget, safety, quality, and multi-shift team ownership. Technical Grounding & Demonstration Ability: Strong mechanical foundation across CNC press bending, power presses, iron workers, CNC plasma/laser cutting, shearing, CNC auto drilling, and roll forming lines-with the proven ability to evaluate setups, troubleshoot tool/die issues, and demonstrate correct operating practices to junior staff when necessary. System-Building Track Record: Demonstrated experience authoring Standard Operating Procedures (SOPs), designing shop-floor formats, and implementing 5S, Kaizen, or Lean workflows in a growing manufacturing environment. Drawing & Software Proficiency: Proficient in AutoCAD (2D/3D) for fabrication drawing review and part dimensioning; familiarity with Autodesk mechanical/detailing environments (e.g., Autodesk Advance Steel, Autodesk Inventor, or similar) and nesting software (e.g., CypCut, ProNest, SigmaNEST). ERP Proficiency: Hands-on experience working with ERP/SAP systems for work order tracking, inventory management, and shift-wise production confirmation. People Leadership: Strong interpersonal, team-building, and conflict-resolution skills with experience managing a multi-shift workforce of engineers, supervisors, and technicians.Preferred Experience managing multi-shift, multi-line fabrication operations in light structural steel, racking, greenhouse, or industrial enclosures. Familiarity with paint shop operations (liquid painting / powder coating) and surface preparation standards. Exposure to Hot-Dip Galvanizing (HDG) processes or coordination with dedicated galvanizing units is an added advantage. Formal certifications in Lean Manufacturing, Six Sigma (Green Belt), or ISO Internal Auditor.

We are looking for a Machine Shop Supervisor to oversee operations in our workshop. The ideal candidate will ensure that all processes run smoothly and efficiently while managing the team. Key Responsibilities:- Supervise Daily Operations: Oversee the daily activities in the machine shop to ensure production goals are met and quality standards are maintained.- Manage Team Performance: Lead and support shop personnel, providing guidance and training to enhance skills and efficiency.- Quality Control: Implement and enforce quality checks to ensure all finished products meet the required specifications and standards.- Maintain Equipment: Ensure that all machinery is well-maintained and safe to operate, coordinating repairs and service schedules as necessary.- Inventory Management: Monitor inventory levels of materials and tools, placing orders as needed to ensure continuous operations without delays.- Safety Compliance: Promote a safe working environment by ensuring all team members adhere to safety regulations and best practices.Required Skills and Expectations:Candidates should have a diploma in a relevant field and demonstrate a strong understanding of machining processes. Attention to detail is critical, along with problem-solving skills to address any challenges that arise in production. Effective communication abilities are essential for leading the team and coordinating with different departments. The candidate must also be able to work full-time in our Thiruvallur office, and we require male candidates for this role. A proactive attitude towards continuous improvement will be highly valued.

We are looking for a skilled CNC Maintenance Engineer with 3 to 9 years of experience to maintain and repair CNC machines in our facility located in Kalapatti, Coimbatore. This role requires a strong technical background and the ability to troubleshoot complex machinery.nnKey Responsibilities:nn1. Machine Maintenance: Regularly inspect and maintain CNC machines to ensure they operate efficiently and effectively, reducing downtime.nn2. Troubleshooting: Diagnose and resolve mechanical and electrical issues in CNC equipment, performing repairs as needed to minimize production interruptions.nn3. Documentation: Maintain accurate records of all maintenance activities, repairs, and machine performance to identify areas for improvement and ensure compliance with safety standards.nn4. Collaboration: Work closely with production teams to schedule maintenance activities without affecting production timelines, maintaining open lines of communication.nn5. Training: Provide guidance and training to junior staff on machine operations, maintenance best practices, and safety protocols.nnRequirements:nnCandidates must possess a Diploma in a related field. A minimum of 3 years and up to 9 years of hands-on experience with CNC machines is essential. Attention to detail and strong problem-solving skills are necessary, along with a commitment to safety and quality standards. Male candidates are preferred for this role, which is full-time and office-based.

A CNC Turning Operator is responsible for operating and managing CNC turning machines, specifically those with Fanuc control systems. This role is essential for producing precision parts as per specifications. Key responsibilities include setting up and configuring CNC turning machines, ensuring accurate measurements, and monitoring operations for quality assurance. The operator will carefully interpret engineering drawings, program machines, and perform routine maintenance to ensure optimal performance. Attention to detail is crucial as the role involves regular inspections of produced items to guarantee they meet required standards.Candidates for this position should possess a basic understanding of CNC machinery and some familiarity with Fanuc control systems. A 10th grade education is required, reflecting essential math and reading skills necessary for interpreting technical documents and measurements. As this is an entry-level position, prior experience is not mandatory, making it suitable for those looking to start their careers in manufacturing.The job is full-time and based in the industrial area Phase 2, requiring the operator to work onsite. Typical working hours and more specific shift details will be provided during the hiring process. A strong work ethic, reliability, and a committed approach to task completion are essential expectations for all applicants.

We are seeking a dedicated Maintenance Engineer with 2 to 4 years of experience to ensure the smooth operation of machinery and equipment. This full-time position is based in Chakan, Pune.Key Responsibilities:1. Equipment Maintenance: Regularly inspect, maintain, and repair machinery to minimize downtime and ensure optimal performance.2. Troubleshooting: Quickly identify and resolve issues in mechanical systems, implementing effective solutions to prevent future problems.3. Documentation: Maintain accurate records of maintenance activities, inspections, and repairs to ensure compliance with safety regulations and company standards.4. Team Collaboration: Work closely with other engineering and production teams to coordinate maintenance schedules and support ongoing projects.5. Safety Compliance: Ensure that all repairs and maintenance work adhere to safety protocols to promote a safe working environment.Required Skills and Expectations:Candidates should possess a relevant engineering degree and have a strong understanding of mechanical systems. Effective problem-solving skills and the ability to work under pressure are essential. Strong communication skills are necessary for collaborating with team members and reporting on maintenance activities. A proactive approach to maintenance, along with flexibility to adapt to changing priorities, is expected. This role is suitable for males who can effectively contribute to a dynamic team and are committed to maintaining high operational standards.

We are immediately hiring for Cutting Tools Engineering - Tool Management in CNC machining exposure in planning, trials, and vendor development. Be part of growing Business and technically competent project on Cutting tools development for New Products with strong knowledge in selecting the right cutting tools during product development (right tool for the right application). We are keen for Tooling lifecycle, Tooling development , Tooling application process experiences.

The CNC Machine Maintenance Technician installs, troubleshoots, repairs, and maintains CNC (Computer Numerical Control) industrial machinery. The primary goal is to maximize machine uptime, ensure production accuracy, and perform rigorous preventive maintenance.CNC/VMC/VTL/LatheRoutine Maintenance: Perform scheduled preventive maintenance (PM) on CNC mills, lathes, and routers.Mechanical Repairs: Fix or replace spindles, ballscrews, bearings, linear guides, and gearboxes.Fluid Systems: Troubleshoot and repair hydraulic pumps, pneumatic valves, and coolant systems.Electrical Work: Diagnose faulty wiring, sensors, relays, servo motors, and drive amplifiers.Control Systems: Troubleshoot CNC control boards (e.g., Fanuc, Siemens, Haas, Mazak).Precision Alignment: Geometrically align machine axes using indicators, lasers, and ballbar tests.Documentation: Keep detailed digital logs of machine service history, parts used, and downtime.Safety Compliance: Adhere strictly to Lockout/Tagout (LOTO) procedures and OSHA safety regulations.

The CNC Programmer will be responsible for setting up and operating computer numerical control (CNC) machines to produce precision parts and tools. The ideal candidate should have a keen eye for detail and a strong understanding of machinery.Key Responsibilities:- Program Creation: Develop and modify CNC programs based on engineering drawings or specifications to ensure accurate production of parts.- Machine Setup: Set up CNC machines, including loading materials and tools, aligning components, and configuring machine settings for optimal performance.- Quality Inspection: Monitor machining processes and inspect finished products using measuring instruments to ensure they meet strict quality standards.- Troubleshooting: Identify and resolve any issues that arise during the production process, including machine malfunctions or programming errors, to minimize downtime.- Maintenance: Perform routine maintenance and cleaning of CNC machines to ensure they are in good working condition and to prolong their lifespan.- Collaboration: Work closely with other team members, including engineers and operators, to improve processes and ensure a smooth workflow.Required Skills and Expectations:Candidates should have 1 to 5 years of experience in CNC programming and operation. A minimum of 10th-grade education is required. The role is intended for male candidates and requires full-time attendance at the office in Vasai East. Strong attention to detail, problem-solving skills, and the ability to work under pressure are essential. Familiarity with CAD/CAM software and a basic understanding of engineering drawings will be advantageous. Candidates should also possess effective communication skills and a willingness to learn and adapt in a fast-paced environment.

Select, mount, and dress grinding wheels based on the material and required finish . Secure raw workpieces to the magnetic chuck or holding fixtures. Set machine speeds, feed rates, and guides to control table travel and depth of cut. Monitor the cutting process to prevent overheating or material deformation. Secure raw materials, install cutting tools, and set proper feed rates and rotational speeds for turning, boring, threading, or facing.

Junior Electrical Engineer - Engineering & Manufacturing Company (Gurugram)Experience: 1-2 Years Location: Gurugram Budget: 20,000-25,000 per monthAbout the Role: A reputed Engineering & Manufacturing company in Gurugram is seeking a young and dynamic Electrical Engineer to assist the Technical Head in daily operations and project execution. This role offers hands-on exposure to electrical systems, design support, and technical coordination within a fast-paced industrial environment.Key Responsibilities: Support the Technical Head in electrical design, maintenance, and project documentation. Assist in troubleshooting and resolving electrical system issues. Conduct basic analysis and prepare reports using MS Office tools. Coordinate with cross-functional teams for smooth project execution. Contribute to process improvements and ensure compliance with safety standards.Candidate Profile: Bachelors degree in Electrical / Electronics Engineering or related field. 1-2 years of relevant experience in electrical systems or manufacturing setups. Strong analytical and problem-solving skills. Effective communication and teamwork abilities. Proficiency in MS Office; basic knowledge of AutoCAD or electrical design tools is an advantage.

As a CNC Maintenance Engineer, you will be responsible for ensuring that CNC machines are operating efficiently and effectively. Your technical skills will be essential in keeping machinery in good condition and minimizing downtime. Key Responsibilities:- Machine Maintenance: Conduct regular inspections and maintenance on CNC machines to ensure they are in optimal working condition, which will help prevent breakdowns.- Troubleshooting Faults: Identify and diagnose issues with CNC equipment, addressing problems promptly to reduce downtime and maintain production schedules.- Repairs and Upgrades: Conduct necessary repairs and upgrades on CNC machines, including changing parts and implementing software updates to enhance functionality.- Documentation: Maintain accurate records of maintenance activities, repairs, and inspections, ensuring compliance with company policies and safety standards.- Collaboration: Work closely with the production team to schedule maintenance without disrupting the manufacturing process, ensuring smooth operations.Required Skills and Expectations:Candidates should have a minimum of 1 to 3 years of experience in CNC machine maintenance. An I.T.I. qualification is required, demonstrating a technical understanding of CNC operations. You should be proficient in diagnosing machine issues, possess strong problem-solving skills, and be able to work collaboratively in a team environment. Attention to detail is essential for ensuring all maintenance work meets safety and quality standards. Additionally, effective communication skills will help in coordinating with other departments.

As a CNC Operator, you will be responsible for operating and overseeing CNC machinery to create precision parts and products. This is a full-time position based in Tiruvallur.Key Responsibilities:- Set Up CNC Machines: Prepare machines for production by installing and aligning tools, fixtures, and workpieces according to specifications.- Read Technical Drawings: Examine blueprints and technical drawings to understand project specifications and ensure accurate production.- Monitor Machine Operations: Keep an eye on the performance of CNC machines during operation, making adjustments as needed to maintain quality.- Conduct Quality Checks: Use measuring tools to inspect finished products and ensure they meet required specifications and tolerances.- Maintain Equipment: Regularly clean and perform basic maintenance on machines to ensure they operate efficiently and safely.- Collaborate with Team: Communicate effectively with team members and supervisors to report issues, suggest improvements, and stay informed on project updates.Required Skills and Expectations:- A diploma in mechanical engineering or a related field is required, providing foundational knowledge for the role.- Familiarity with CNC machinery and tools is essential. Prior experience is a plus but not mandatory, as training will be provided.- Good attention to detail and precision to produce high-quality parts is crucial.- Basic problem-solving skills to troubleshoot minor machine issues are important.- Ability to work effectively in a team environment and communicate clearly with colleagues. Candidates should be eager to learn and adapt in a fast-paced manufacturing setting.

Read and understand blueprint designsSet up machinery for productionRework metal to create the blueprint designMeasure and verify all calculations prior to setting up the machineryMaintain a clean and organized working environmentComplete routine maintenance of their machineryEnter all relevant codes to specify the feed, speed, and cut of any toolpath for a CNC

Key ResponsibilitiesMachine Setup and Operation: Set up CNC machines according to engineering drawings and specifications, including installing tools, fixtures, and custom components, and adjusting machine parameters for precision machining. Program Verification and Adjustment: Verify, edit, and optimize CNC programs to ensure accurate production and minimal errors. Quality Control: Inspect and measure finished products to ensure they meet dimensional and quality standards, reporting any non-conformances and assisting in root cause analysis. Maintenance and Troubleshooting: Perform routine maintenance, troubleshoot machine malfunctions, and make adjustments to maintain smooth operation and minimize downtime. Collaboration: Work closely with engineers, production supervisors, quality control personnel, and maintenance teams to optimize production processes and meet targets. Process Improvement: Suggest and implement improvements to increase efficiency, reduce scrap, and enhance overall production quality.

Job Description: Quality EngineerPosition Details Position Title: Quality Engineer Location: Khopoli - Pali Road Department: Quality / Operations Reports To: Assistant Sourcing Manager and Functionally to Assistant Customer Service Manager Employment Type: Full-timeLocation Preference Candidates residing in the Navi Mumbai or Khopoli region will be preferred or should be willing to relocate.Role Overview The Quality Engineer will ensure that all manufactured machines, assemblies, and spare parts meet inhouse drawing specifications and meet customer expectations. The role involves supplier quality improvement, shop-floor quality control, interpretation of OEM Belgium drawings. The engineer will coordinate closely with sourcing, production, and customer service teams, including handling quality or delivery risks related to new suppliers and ongoing orders. The role also includes supporting reliability analysis through run life calculations and Mean Time Between Failure (MTBF) evaluation for critical parts and complete machines, along with driving root cause analysis and continuous improvement.Work Distribution 60% Supplier Quality & Supplier Visits (initial phase) 40% Shop Floor Quality at Khopoli Note: This ratio will gradually shift toward more shopfloor focus as suppliers stabilize and the Khopoli factory becomes fully operational.Supplier Quality Conduct supplier evaluations, capability assessments, and audits. Work with suppliers to improve machining quality and implement robust process controls. Ensure suppliers correctly interpret engineering drawings, GD&T, tolerances, and material standards. Support suppliers in scaling up quality for complex, high-precision components.Typical QC Scope (Parts & Machines) Perform QC on machined parts such as tool holders, die holders, shafts, bushes, plates, brackets, fabricated assemblies, and other components related to group company enquiries. Understand machining processes including CNC Turning, CNC Milling, VMC/HMC, grinding, fabrication, bending, laser cutting, wire-cut EDM, etc. Evaluate secondary processes such as heat treatment, hardening, stress relieving, surface finishing, and other value-adding operations.Quality Management & Compliance Implement and maintain QA procedures, documentation, and reporting systems. Ensure compliance with ISO 9001, IATF 16949, ISO 14001, and customer standards. Maintain control plans, PFMEA, work instructions, and inspection documents. Support customer audits, internal audits, and compliance reviews.Inspection & Testing Conduct incoming, inprocess, and final inspections Use precision measurement instruments such as height gauge, vernier caliper, micrometer, bore gauge, and dial indicators. Verify material grades as per EN and IS standards. Analyze inspection trends to determine deviations and corrective actions.OEM Drawing Understanding & Technical Communication Extract key technical details from OEM Belgium drawings (GD&T, tolerances, fitment requirements). Coordinate with OEM engineering teams for clarifications. Recommend design modifications for cost reduction and enhanced manufacturability. Communicate technical requirements clearly to suppliers and internal teams.Root Cause Analysis & Problem Solving Apply structured methodologies such as 5 Why, Fishbone Diagram, 8D, and DMAIC. Lead crossfunctional teams to address quality issues. Drive implementation and verification of corrective and preventive actions (CAPA).Continuous Improvement Support lean manufacturing and wastereduction initiatives. Identify process capability improvement opportunities. Participate in capability studies including Cp, Cpk, MSA, and GRR.Qualifications & Requirements Degree in Mechanical, Production, or Industrial Engineering. 2-5 years experience in machining quality, supplier quality, or manufacturing QC. Strong knowledge of machining processes (CNC, VMC, fabrication, grinding). Handson experience with APQP, PPAP, FMEA, MSA, SPC, 8D. Proficient with precision measuring instruments. Strong understanding of EN & IS material standards. Ability to read and interpret technical drawings with GD&T. Strong communication skills for interaction with OEM Belgium. Experience with QMS/ERP systems is an advantage.Key Competencies Analytical and detailoriented Ownership and accountability Strong technical communication skills Continuous improvement mindset Customerfocused approachWhy Join Us? Fastgrowing and technically dynamic environment Opportunity to contribute to advanced manufacturing and quality systems Longterm growth and development opportunities

As an Automation Engineer, you will play a vital role in improving and streamlining processes through automation. Your responsibilities will include:- Design and Develop Automation Solutions: Create and implement automation scripts and tools to enhance efficiency and reduce manual workloads in various processes.- Test Automation Systems: Conduct tests on automated systems to ensure they function correctly and identify any areas for improvement.- Troubleshoot Issues: Investigate and resolve problems within automation systems or processes to maintain smooth and reliable operations.- Collaborate with Teams: Work closely with software developers and other engineers to understand existing processes and gather requirements for automation initiatives.- Document Processes: Maintain clear documentation of automation procedures, processes, and updates to support future development and training efforts.To succeed in this role, candidates should possess a basic understanding of automation tools and programming concepts. Strong analytical and problem-solving skills are essential, as well as the ability to work well in a team environment. A willingness to learn new technologies and adapt to changing processes is also important. While prior experience is not mandatory, candidates with some experience or internships related to automation will be preferred. A minimum educational qualification of 10th pass is required. You must be willing to work full-time from the office located in Kanchipuram, Chennai.

We are seeking a skilled CNC Lathe Operator with 1 to 2 years of experience to join our team in Vikhroli, Mumbai. The ideal candidate should have completed I.T.I. and will work full-time in our office.Key Responsibilities:1. Machine Operation: Operate CNC lathe machines to produce precision parts according to specifications. Ensure machines are set up correctly and running efficiently.2. Quality Control: Monitor the production process and conduct inspections on finished products to maintain high quality standards. Identify and address any defects or issues promptly.3. Maintenance: Perform routine maintenance on CNC machines, including cleaning and troubleshooting. Report any malfunctions or needed repairs to management.4. Documentation: Keep accurate records of production outputs and any issues encountered during the manufacturing process. This ensures transparency and helps in tracking performance.Required Skills and Expectations:ITI in Turner / Machinist OR Diploma ( Mechanical )Experience : 1-2 years experienceCandidates must show a commitment to safety and quality in all their work, ensuring a safe and productive work environment. Female candidates may also apply for this role.

As a Tool Maker, you will be responsible for creating, repairing, and maintaining precision tools and molds used in the manufacturing process. Your work will ensure the smooth operation of production machinery and contribute to high-quality output.Key Responsibilities:- Tool Fabrication: You will design and build tools according to specifications, ensuring they meet the required standards for quality and precision.- Tools Maintenance: Regularly inspect and maintain tools to ensure they are in optimal working condition. This includes sharpening and repairing worn or damaged tools.- Blueprint Interpretation: Read and understand technical drawings and schematics to accurately create tools and molds that meet specific production needs.- Machinery Operation: Operate various machines such as lathes, milling machines, and grinding machines. Familiarity with these machines is essential for effective tool making.- Quality Control: Conduct tests to check the functionality and quality of produced tools, making necessary adjustments to meet quality standards.Required Skills and Expectations:- A Diploma in Mechanical Engineering or a related field is essential for this role.- You should have 2 to 8 years of relevant work experience in tool making.- Strong attention to detail and precision is crucial for producing high-quality tools.- Good problem-solving skills are necessary for identifying and fixing issues with tools or equipment.- Basic computer skills, particularly in design software, are advantageous for tool design tasks. We expect you to be a team player with effective communication skills and a strong work ethic. Your ability to work efficiently in a fast-paced environment is also important.

Qualification-Mechanical Fresher, Job Location -Gurgaon

We are seeking a Diploma Trainee Engineer to join our team in Arasur, Coimbatore. This full-time role is perfect for fresh ITI graduates looking to begin their engineering career. Key Responsibilities:1. Assisting in Technical Tasks: You will support senior engineers in daily technical operations, learning essential engineering practices and processes.2. Conducting Tests and Evaluations: You will perform tests on equipment and components, documenting results to help ensure quality and efficiency.3. Collaborating with Team Members: You will work closely with your team to troubleshoot and solve engineering problems, fostering a cooperative work environment.4. Participating in Training Sessions: You will attend training programs to enhance your skills and knowledge in engineering principles and applications.5. Maintaining Equipment and Tools: You will be responsible for keeping tools and equipment in good condition, ensuring a safe and efficient workspace.Required Skills and Expectations:Candidates must have completed their I.T.I. and be male. A willingness to learn and adapt is crucial. You should possess good communication skills to interact with team members effectively. Basic technical knowledge and problem-solving abilities are important. A strong sense of responsibility and attention to detail will be essential to succeed in this role. You should be motivated, eager to grow professionally, and ready to contribute to the team in a dynamic work environment.

Key ResponsibilitiesMachine Setup and Operation: Set up CNC machines according to engineering drawings and specifications, including installing tools, fixtures, and custom components, and adjusting machine parameters for precision machining. Program Verification and Adjustment: Verify, edit, and optimize CNC programs to ensure accurate production and minimal errors. Quality Control: Inspect and measure finished products to ensure they meet dimensional and quality standards, reporting any non-conformances and assisting in root cause analysis. Maintenance and Troubleshooting: Perform routine maintenance, troubleshoot machine malfunctions, and make adjustments to maintain smooth operation and minimize downtime. Collaboration: Work closely with engineers, production supervisors, quality control personnel, and maintenance teams to optimize production processes and meet targets. Process Improvement: Suggest and implement improvements to increase efficiency, reduce scrap, and enhance overall production quality.

NOTE - CNC VMC MAHINE SHOP QUALITY EXPERIENCE - We are looking for a dedicated Senior Quality Engineer to join our team in Chakan Pune. The ideal candidate will have 4 to 7 years of experience in quality engineering and a strong educational background in engineering. This full-time position requires a male candidate who will work from the office.Key Responsibilities:1. Quality Assurance Planning: Develop and implement quality assurance plans to ensure product compliance with industry standards and customer requirements.2. Process Improvement: Analyze current manufacturing processes to identify areas for improvement and work on solutions to increase efficiency and quality.3. Testing and Validation: Design and conduct thorough testing procedures for products, ensuring they meet predefined specifications and function properly.4. Data Analysis and Reporting: Gather, analyze, and interpret quality data, preparing reports to communicate findings and recommend actions to enhance quality.5. Collaboration: Work closely with cross-functional teams, including production, engineering, and supply chain, to resolve quality issues and implement corrective actions.Required Skills and Expectations:The ideal candidate should have a strong background in quality engineering, with hands-on experience in quality control processes, tools, and methodologies. They must possess excellent analytical skills and attention to detail. Strong communication skills are essential for effectively collaborating with various teams. A proactive and problem-solving mindset is expected to drive improvements and maintain high-quality standards. A graduate degree in engineering is required for this role.

Greeting From Vishakan Placement Service !! Hiring VMC OperatorIndustry: Automotive -Sheet metal industry Qualification: Diploma- B,E/B.Tech Mechanical/Automobile Experience: 3-8 YearsLocation: Papparapakkam Tiruvallur Job Shift Timing: 06.00 am to 2.30 pm - 1st shift 02.00pm to 09.50 pm - 2nd shift 09.50pm to 06.00am - 3rd shift 09.00 am to 05.30 pm - General shift Sunday week-OffNo of openings : 35+ Cab Facility: Pickup from Thiruninravur Railway Station Pickup from Thiruvallur Railway Station Immediate Joiner Need Joining within 7 to 15 Days Interview Schedule: Monday - Saturday / 10 AM- 12 PM & 2 PM-4 PM Interview Timing Interview Process: Direct Walk in Interview- HR Round - Technical Round - MD Round Immediate Joiner Must Work Location: Papparambakkam Village, Mannur Road, Koppur, Tamil Nadu - 602025 Candidate Nearby Location: sriperumbudur, Thandalam, Mannur, Nemili, Manavala Nagar(tiruvallur), Thiruninravur,Sevvapettai,Veppampattu,Thirumuazhisai, Aranvoyal. If candidate interested for job feel free please call immediately Call @ Vishakan Placement Service - HR Pradeep # please refer your friends or colleague#