Systems Engineer Jobs

PHYLayer EngineerWireless & Optical Wireless Communications Signal Processing FPGAFunctionLevelEducationExperienceLocationResearch & Development - Optical Wireless PHYSenior Physical Layer DeveloperM.Tech / M.S. / Ph.D. - ECE, EE, Signal Processing5-8 years PhD counts as experienceOn-siteResponsibilities Design and develop PHY algorithms for LiFi and FSO - modulation (OOK, PPM, DCO-OFDM, ACO-OFDM),channel coding (LDPC, Polar, RS), and synchronisation Model and simulate optical wireless channels: atmospheric turbulence, pointing errors, IM/DD receiver noise,ambient light interference, and LED/laser non-linearities Build end-to-end link-level simulation chains in MATLAB or Python and evaluate BER, throughput, andspectral efficiency under realistic conditions Implement validated algorithms on FPGA - translate fixed-point models into RTL or HLS; own algorithmcorrectness through hardware validation Write bit-exact C/C++ reference models to support hardware verification Track andengage with relevant standards: IEEE 802.11bb (LiFi), ITU-T FSO, and adjacent wireless standardsRequired M.Tech, M.S., or Ph.D. in ECE, Electrical Engineering, Signal Processing, or a related field - thesis or researchin optical wireless, VLC, or wireless communications is a strong indicator Strong fundamentals in digital communications: modulation, channel coding, detection, estimation, andsynchronisation Hands-on experience building PHY simulations from scratch in MATLAB or Python - not just toolboxes Solid understanding of OFDM: multipath channels, cyclic prefix, pilot design, and channel estimation Fixed-point thinking - ability to design algorithms aware of hardware quantisation and implementation cost FPGAawareness: understand LUT/DSP/BRAM trade-offs, pipelining, and timing well enough to makehardware-friendly algorithm decisions Familiarity with VHDL or Verilog to write or review RTL for PHY blocks Exposure to AMD/Xilinx Vivado - simulation, synthesis, and reading timing and resource reports Working knowledge of at least one wireless or optical wireless standard; ability to read and implement fromspec documentsPreferred Experience with 3Gpp, IEEE 802.11bb (LiFi) or ITU FSO link specifications Optical channel modelling: log-normal turbulence, Gamma-Gamma distribution, pointing error statistics LEDnon-linearity, predistortion, and flicker mitigation for VLC systems Optical MIMO, spatial diversity techniques, and APD / PIN photodetector front-end modelling Cellular or 5G NR PHY background - OFDM, LDPC, channel coding chain SDRplatforms: Ettus USRP and GNU Radio for over-the-air prototyping Linux environment and Python / Bash scripting for toolchain automation Vitis HLS or OpenCL-based FPGA acceleration flows Publications in IEEE Photonics, IEEE Communications Letters, JOCN, or equivalent venuesResearch ProfileWe are open to two architect types: M.Tech or PhD with thesis in VLC, OWC, optical OFDM, or wireless channel modelling - research outputmatters more than years of industry experience Wireless PHY engineer from industry looking to move into R&D - trainable on the optical wireless domain ifthe PHY and FPGA fundamentals are strong

We are looking for a motivated Mechanical Engineer to join our team in Ahmedabad. This role is ideal for recent graduates or those with up to two years of experience. Key Responsibilities:- **Design and Development**: Create mechanical designs using CAD software. This involves building models and prototypes to test and refine ideas before final production.- **Testing and Quality Assurance**: Conduct tests on mechanical parts and systems. You will ensure that everything meets safety and performance standards by analyzing test results and making adjustments as needed.- **Project Collaboration**: Work closely with other engineers and team members. You will participate in project meetings and help coordinate tasks to keep projects on schedule.- **Documentation**: Maintain accurate records of designs, tests, and project progress. This is important for tracking changes, ensuring compliance, and future reference.- **Problem-Solving**: Address any mechanical issues that arise during development or production. You will analyze problems, find solutions, and implement changes effectively.Required Skills and Expectations:- A Bachelor's degree in Mechanical Engineering or a related field is essential.- Proficiency in CAD software (e.g., AutoCAD, SolidWorks) is a must for designing and modeling.- Strong analytical skills to troubleshoot mechanical systems and solve complex problems.- Good communication skills are necessary for working with team members and presenting ideas.- A willingness to learn and adapt to new technologies and methods in mechanical engineering. This position is a full-time role based in our office, offering a great opportunity to kick-start your career in mechanical engineering.

As an Electrical Automation Engineer, you will be responsible for designing, developing, and maintaining electrical automation systems. You will work closely with various engineering teams to ensure efficiency and reliability in production processes. Your role will include:- **System Design and Development**: Creating detailed designs for electrical automation systems, ensuring they meet project requirements and industry standards.- **Installation and Commissioning**: Overseeing the installation and commissioning of automation systems, ensuring they are set up correctly and function as intended.- **Troubleshooting and Maintenance**: Diagnosing issues in existing automation systems and implementing effective solutions to minimize downtime.- **Collaboration with Teams**: Working alongside mechanical and software engineers to integrate systems and optimize overall performance.- **Documentation and Reporting**: Maintaining clear documentation of all designs, modifications, and troubleshooting procedures, and preparing regular reports for management.To be successful in this role, you should possess a B.E or an equivalent advanced/higher diploma, along with 2 to 5 years of relevant experience in electrical automation. Proficiency in programming languages related to automation systems is essential. You should also have a strong understanding of electrical circuits, sensors, and control systems. Effective communication skills and the ability to work collaboratively in a team environment are important. A willingness to learn and adapt to new technologies will also contribute to your success in this position.

Need 5 CCTV Technicians in Shastipuram Skills CCTV Maintenance , CCTV Installations , CCTV Services Etc.

Will have to do Electrical work in commercial vehicles. Proper training will be provided. A bit of electrical knowledge is only required

We are looking for a motivated Mechanical Engineer to join our team in New Zealand. This role is suitable for both fresh graduates and those with up to 6 years of experience in the field. The ideal candidate should be passionate about mechanical systems and eager to learn and grow in their career.**Key Responsibilities:**- **Design Development:** Create and improve mechanical designs for various projects, ensuring they meet required specifications and standards.- **Testing and Analysis:** Conduct tests on mechanical components and systems, analyzing data to ensure performance and reliability.- **Collaboration:** Work closely with other engineers and teams to integrate mechanical components with other systems, ensuring seamless operation.- **Problem Solving:** Identify mechanical issues and troubleshoot problems, providing innovative solutions to enhance system performance.- **Documentation:** Prepare detailed reports and documentation for designs, tests, and modifications to keep all project records up-to-date.**Required Skills and Expectations:**- A foundational understanding of mechanical engineering principles, supported by a 12th-grade education or equivalent.- Strong analytical skills to assess designs and troubleshoot mechanical issues effectively.- Ability to work collaboratively within a team environment while also having the initiative to manage independent tasks.- Excellent communication skills to clearly convey ideas and technical information to peers and stakeholders.- A willingness to learn and adapt to new technologies and methods in mechanical engineering.

We are looking for a skilled and customer-focused RO Service Engineer to install, maintain, troubleshoot, and repair Reverse Osmosis (RO) water purification systems for residential, commercial, and industrial customers. The ideal candidate should have strong technical knowledge of water purification systems, excellent problem-solving skills, and a commitment to delivering high-quality customer service.Key ResponsibilitiesInstallation & CommissioningInstall and commission domestic, commercial, and industrial RO water purification systems.Ensure proper plumbing, electrical connections, and system setup.Conduct system testing to verify performance and water quality.Explain system operation and maintenance procedures to customers.Preventive MaintenancePerform scheduled preventive maintenance and Annual Maintenance Contract (AMC) services.Replace filters, membranes, cartridges, UV lamps, and other consumable parts.Clean and sanitize RO systems as per company standards.Maintain service records and maintenance schedules.

We are hiring RO (Reverse Osmosis) Service Engineer installs, maintains, and repairs water purification systems for domestic or industrial use. They diagnose mechanical and electrical faults, test water quality (TDS), and ensure systems provide safe, clean drinking water.Core Responsibilities Installation & Setup: Safely install domestic purifiers or commercial/industrial RO plants at customer sites.Maintenance & Repair: Conduct routine preventive maintenance, replace defective parts (membranes, filters, pumps), and fix operational issues.Water Quality Testing: Measure Total Dissolved Solids (TDS), pH, and conductivity to ensure water output meets safety standards.Customer Service: Address client complaints, provide technical guidance, and ensure customer satisfaction.Key Skills & Qualifications Education: Diploma or Degree in Electrical, Electronics, Instrumentation, or related fields.Technical Knowledge: Understanding of water chemistry, pumps, valves, and electrical control panels.Soft Skills: Strong communication and problem-solving skills, with a willingness to travel for on-site field visits.

As a Quality Engineer, you will play a crucial role in ensuring the quality and reliability of our products. You will be responsible for developing and implementing quality control processes to meet our high standards.**Key Responsibilities:**- **Quality Assurance Testing:** Conduct thorough tests on products to identify any defects and ensure they meet quality standards. This helps ensure only the best products are delivered to customers.- **Process Development:** Create and improve quality control processes and procedures. This ensures that every product is consistently produced at the highest quality.- **Root Cause Analysis:** Investigate and analyze defects or failures in products to identify their root causes. Understanding these causes allows for better prevention strategies in the future.- **Documentation:** Maintain clear and detailed documentation of quality issues and test results. This documentation is essential for tracking improvements and ensuring accountability.- **Collaboration:** Work closely with production teams and other departments to address quality concerns and improve overall product quality. Cooperation is key to maintaining high-quality standards.**Required Skills and Expectations:**- **Educational Background:** A Bachelor of Engineering (B.E) degree is required, providing a solid foundation in technical principles.- **Experience:** Candidates should have 3 to 6 years of relevant experience in quality engineering.- **Analytical Skills:** Strong analytical skills are essential for assessing product quality and identifying areas for improvement.- **Attention to Detail:** A keen eye for detail is important to find and address issues that could affect product quality.- **Technical Proficiency:** Familiarity with quality control tools and techniques, as well as industry standards, is expected.- **Communication Skills:** Excellent communication skills are necessary to effectively report findings and collaborate with cross-functional teams.

Job Summary:We are looking for a dedicated and technically skilled Technical Support Engineer to provide support for hardware, networking, and related technical issues. The candidate will be responsible for troubleshooting, installation, maintenance, and on-site technical support. The role requires both office-based and field-based work, depending on project requirements.Key Responsibilities: Provide technical support for hardware and networking-related issues Diagnose and troubleshoot system, device, and network problems Install, configure, and maintain computer systems, networking equipment, and related devices Visit client sites for field support, servicing, and issue resolution as required Coordinate with internal teams to ensure timely technical assistance and problem resolution Maintain service reports, issue logs, and technical documentation Assist in ensuring smooth operation of all installed systems and equipmentRequirements and Qualifications: B.Tech in Computer Science, Information Technology, Electronics, or related field Freshers are welcome to apply; prior experience will be an added advantage Basic knowledge of computer hardware and networking Understanding of routers, switches, LAN/WAN, and troubleshooting techniques Good analytical and problem-solving skills Basic communication and coordination abilitiesPreferred Candidate: Candidate willing to work in field-based assignments as well as office-based support Owns a personal vehicle for travel and site visits Comfortable handling client interactions during on-site visits Male candidate preferred Quick learner with a proactive and responsible attitude

We are seeking a motivated System Engineer to join our team in Bangalore. This entry-level position is perfect for recent graduates looking to grow their careers in technology.Key Responsibilities:- **System Design and Implementation**: Assist in creating and setting up system architectures to meet organizational needs, ensuring they are efficient and reliable.- **Troubleshooting and Support**: Help identify and resolve technical issues in the system. You will be required to troubleshoot problems and support users to minimize downtime.- **Maintenance and Upgrades**: Regularly monitor system performance and assist in maintaining software and hardware. You will also support the implementation of upgrades as needed.- **Documentation**: Document system configurations and changes, ensuring that all modifications are recorded for future reference.Required Skills and Expectations:Candidates should have a degree in engineering or a related field. A strong understanding of basic programming and networking concepts is essential. Good problem-solving skills and the ability to communicate effectively in a team are crucial. We expect you to be detail-oriented and proactive in learning new technologies. You should demonstrate a willingness to work flexible hours if necessary and actively contribute to team projects. As this position is based in-office, you must be prepared to work collaboratively with colleagues daily.

Electronics Testing AssistantQualification: Diploma / ITI / B.Tech in Electronics, Electronics & Communication, Instrumentation, or a related field.Job SummaryWe are looking for a detail-oriented Electronics Testing Assistant to support product testing, troubleshooting, validation, documentation, installation, commissioning, and customer support. The role involves both laboratory and field work, including travel to customer sites across India.Key ResponsibilitiesPerform functional, performance, reliability, and environmental testing of electronic products.Troubleshoot hardware and embedded systems and assist in root cause analysis.Support hardware assembly, wiring, integration, and test setup.Operate test equipment including multimeters, oscilloscopes, power supplies, signal generators, and spectrum analyzers.Conduct PCB testing, debugging, firmware loading, device configuration, and software validation.Maintain test records, reports, calibration logs, and quality documentation.Coordinate with Engineering, R&D, and Quality teams during product validation.Visit customer sites for installation, commissioning, alignment, testing, troubleshooting, and preventive maintenance.Prepare installation, commissioning, and site visit reports while providing technical support during deployments and customer acceptance testing.Required SkillsKnowledge of analog & digital electronics.Hardware testing, PCB debugging, and embedded systems.Ability to read schematics and wiring diagrams.Familiarity with oscilloscopes, multimeters, power supplies, and laboratory instruments.Basic networking (Ethernet, TCP/IP).MS Office proficiency.Strong troubleshooting, analytical, communication, and documentation skills.Willingness to travel extensively across India.Preferred SkillsExperience in electronics testing, validation, or quality assurance.Knowledge of RF, Optical Communication, LiFi, Wireless Communication, or Networking.PCB soldering, rework, firmware flashing, and hardware debugging.Linux/Windows testing environments.Understanding of EMI/EMC, product qualification, and reliability testing.Additional RequirementsImmediate joiners preferred.Valid driving license is an advantage.Self-motivated, responsible, detail-oriented, and capable of working independently or in a team.

We are seeking a Mechanical Engineer to join our team in Canada. This role requires a hands-on approach and a passion for engineering principles. If you are a recent graduate or have up to six years of experience, we encourage you to apply.**Key Responsibilities:**- **Design and Development:** Create and analyze mechanical systems and components using design software to ensure they meet specifications and standards.- **Testing and Evaluation:** Conduct tests on prototypes to evaluate their performance and reliability, making adjustments as needed to improve functionality.- **Collaboration:** Work closely with other engineers and team members to solve design problems and optimize product performance, ensuring effective communication throughout the project.- **Documentation:** Maintain detailed records of designs, modifications, test results, and reports to support project tracking and compliance.- **Project Support:** Assist in project management tasks, including timelines and resource allocation, to ensure projects are completed on time and within budget.**Required Skills and Expectations:**Candidates should have a strong understanding of mechanical engineering principles acquired through education or experience. Proficiency in design software such as SolidWorks or AutoCAD is essential for creating accurate models. Effective problem-solving skills and the ability to work in a team environment are crucial for success in this role. Familiarity with testing methodologies and the ability to interpret technical drawings will be highly beneficial. A proactive attitude and eagerness to learn will help you thrive in our dynamic workplace.