Piping Jobs

Job description:Job Description - Plumbing Draftsman / Plumbing DrafterPosition: Plumbing Draftsman / Plumbing DrafterDepartment: MEP DesignIndustry: MEP Consulting / EngineeringLocation: BengaluruOpenings: 2Job SummaryWe are looking for skilled Plumbing Draftsmen/Drafters to join our MEP design team. The candidates will be responsible for preparing accurate plumbing drawings, layouts, and documentation for building projects while coordinating with other MEP disciplines and ensuring drawings comply with project requirements and applicable standards.Key ResponsibilitiesPrepare detailed 2D plumbing drawings and layouts using AutoCAD.Develop plumbing layouts for water supply, drainage, soil and waste systems.Prepare sanitary, storm-water and rainwater drainage layouts.Prepare pipe routing, shaft layouts, riser diagrams, and schematic drawings.Develop detailed drawings for plumbing fixtures and equipment.Prepare plumbing drawings based on architectural and engineering requirements.Coordinate plumbing layouts with HVAC, Electrical, Fire Fighting, and Architectural drawings.Identify and resolve clashes and coordination issues before finalizing drawings.Revise drawings based on comments from engineers, clients, and project teams.Prepare detailed sections, elevations, and enlarged layouts wherever required.Maintain proper drawing standards, layers, dimensions, annotations, and drawing revisions.Assist engineers in preparing BOQ, quantity take-offs, and material schedules when required.Ensure drawings are issued within project timelines and maintain proper document control.Coordinate with the site team and incorporate site requirements or approved changes into drawings.Required SkillsStrong knowledge of AutoCAD and plumbing drafting.Good understanding of building plumbing systems.Knowledge of water supply and drainage systems.Ability to read and understand architectural and MEP drawings.Good knowledge of pipe sizes, fittings, plumbing fixtures, and routing.Understanding of plumbing shafts, risers, and service coordination.Knowledge of Revit MEP/BIM will be an added advantage.Good attention to detail and accuracy.Ability to work independently as well as coordinate with the MEP design team.Candidate ProfilePosition 1 - Junior Plumbing DrafterExperience: 1 year of relevant experience.Gender-FemaleFreshers with strong AutoCAD knowledge may also be considered.Good knowledge of basic plumbing drafting and AutoCAD.Should be willing to learn and work closely with senior engineers/drafters.Position 2 - Senior Plumbing DrafterExperience: Approximately 10 years of relevant experience. Gender- MaleStrong experience in building plumbing drafting and MEP coordination.Should be capable of independently handling plumbing drawings for projects.Should have good knowledge of AutoCAD and preferably Revit MEP.Experience coordinating with architects, engineers, and site teams will be preferred.EducationDiploma / ITI / Bachelor's degree in Civil, Mechanical, Plumbing, or a related engineering field is preferred.Key QualitiesStrong technical understanding.Good communication and coordination skills.Ability to meet deadlines.Attention to detail.Problem-solving ability.Team-oriented and professional approach.Note: Candidates should have practical experience in building plumbing drafting and MEP coordination. Experience in large-scale commercial, residential, hospitality, or industrial projects will be an advantage.

Key ResponsibilitiesDevelop vehicle and component concepts based on product requirements, market trends, and customer expectations.Create 2D sketches, 3D concept models, and design proposals for automotive systems and components.Collaborate with Styling, Product Engineering, CAE, Manufacturing, and Marketing teams during concept development.Conduct feasibility studies and packaging assessments for new vehicle concepts.Translate styling surfaces into engineering-ready designs.Participate in concept reviews and present design solutions to internal and external stakeholders.Support benchmarking activities and competitor vehicle analysis.Evaluate design alternatives based on cost, performance, safety, and manufacturability.Ensure concept designs comply with OEM, regulatory, and safety requirements.Support prototype development and concept validation activities.

We are looking for a dedicated Site Engineer to join our team. Meerut, India. This role is ideal for individuals with 0 to 5 years of experience who have completed a diploma and are eager to apply their technical knowledge in real-world projects. We prefer candidate Meerut or Near by Location Key Responsibilities:1. Site Supervision: Oversee daily construction activities to ensure safety, quality, and adherence to project schedules. This involves monitoring workers and addressing any issues that arise on-site.2. Technical Support: Provide assistance with technical drawings and specifications. You will be expected to interpret blueprints accurately and communicate necessary changes to the construction team.3. Quality Control: Ensure all work meets the required standards and regulations. Regular inspections will be part of your routine to maintain high-quality craftsmanship throughout the project.4. Collaboration: Work closely with project managers, contractors, and other professionals to foster an efficient work environment. Effective communication skills are crucial for coordination and problem-solving.5. Documentation: Maintain accurate records of daily site activities, materials used, and any changes made during the construction process. This ensures transparency and aids in future project assessments.Required Skills and Expectations:The ideal candidate should possess strong analytical and problem-solving skills, along with a keen attention to detail. Good communication and teamwork abilities are essential for collaborating effectively with various stakeholders. A proactive attitude towards learning and adapting to new challenges is required.

We are looking for a dedicated Fitter to join our team in Nalco Nagar, Angul. This position is suitable for candidates with 0 to 2 years of experience and requires at least a 10th-grade education. The role is full-time and office-based.Key Responsibilities:1. Assembling Parts: You will be responsible for assembling machinery and equipment by connecting various components precisely, following technical specifications and diagrams.2. Maintenance and Repair: You will conduct routine inspections of machinery to identify any issues or wear and tear, assisting in repairs to ensure the equipment operates smoothly.3. Operational Support: Work alongside senior fitters and engineers to assist in the setup and calibration of equipment, contributing to the smooth running of production operations.4. Safety Compliance: Follow all safety guidelines and protocols to maintain a secure working environment, reporting any hazards or unsafe conditions to management immediately.Required Skills and Expectations:Candidates should possess basic knowledge of mechanical principles and tools. Strong attention to detail is essential to ensure precise fittings and assembly. Good communication skills are necessary for understanding instructions and collaborating with team members. The candidate should be physically fit, able to lift heavy equipment, and comfortable working in a hands-on role. A positive attitude, eagerness to learn, and ability to follow directions will contribute significantly to success in this position.Call at 8010872733

We are looking for a Piping Draughtsman to join our team in Dombivli East. The ideal candidate will have 1 to 3 years of experience in piping design and drafting.Key Responsibilities:- Piping Design Drawings: Create detailed and accurate piping design drawings using CAD software, ensuring compliance with project specifications and standards.- Modifications and Updates: Modify existing drawings as required, making sure all changes are documented and updated in the project files to reflect the latest design revisions.- Collaboration with Engineers: Work closely with project engineers to understand design requirements, clarifying any uncertainties to enhance project efficiency.- Preparation of Bill of Materials: Prepare bills of materials based on the drawings, ensuring all necessary components are accounted for and available for procurement.- Quality Assurance: Conduct checks on your drawings to ensure accuracy and completeness, minimizing errors before final submission.Required Skills and Expectations:- Educational Background: The candidate must have completed I.T.I. in a relevant field, showcasing a foundational understanding of piping systems.- Proficiency in CAD Software: Strong skills in Computer-Aided Design (CAD) software are essential for producing high-quality drawings.- Attention to Detail: Must demonstrate a keen eye for detail to avoid errors in design and ensure all specifications are met.- Communication Skills: Effective verbal and written communication skills to interact with team members and stakeholders clearly.- Team Player: Ability to work collaboratively in a team environment, contributing positively to project goals and deadlines.If you meet these qualifications and are eager to work in a dynamic environment, we encourage you to apply.

We are looking for a certified and experienced Electrician to support our IT hardware, network, and CCTV deployment teams. In our industry, stable and safe power is the foundation of reliable IT infrastructure. You will be responsible for setting up the electrical requirements for server racks, UPS systems, CCTV networks, and commercial IT setups, ensuring all installations meet safety standards and provide uninterrupted power to critical client equipment.

Job SummaryWe are seeking an experienced and skilled Plumber with 4-8 years of experience in the installation of HVAC and domestic hot water systems including chillers, heat pumps, calorifiers, plate heat exchangers and associated piping networks. The candidate shall be responsible for carrying out site installation activities in accordance with project drawings, specifications, quality standards and safety requirements.Key ResponsibilitiesCarry out installation works for chilled water, condenser water and domestic hot water piping systems.Execute installation activities related to chillers, heat pumps, calorifiers, plate heat exchangers, storage tanks and associated equipment.Install and assemble piping systems using:MS (Mild Steel) PipesHPVC PipesPPR PipesCopper Pipes (if required)Install and align pumps, valves and accessories as per approved shop drawings.Install various types of valves including:Butterfly ValvesGate ValvesBall ValvesCheck ValvesBalancing ValvesPressure Reducing Valves (PRVs)Differential Pressure Regulating Valves (DRVs)Control Valves and Actuated ValvesPerform cutting, threading, grooving and joining of piping systems using appropriate tools and equipment.Install pipe supports, hangers, brackets and anchors as per project requirements.Read and interpret piping layouts, isometric drawings and shop drawings.Coordinate with supervisors, engineers and other trades to ensure smooth execution of works.Conduct pressure testing, flushing and commissioning support activities.Identify and report installation issues, material shortages and site constraints.Ensure work is completed within project schedules while maintaining quality standards.Maintain proper housekeeping and ensure compliance with site safety regulations and permit requirements.Required Qualifications and SkillsMinimum 4-8 years of experience in plumbing and HVAC installation works.Proven experience in installation of chillers, heat pumps, calorifiers and hot water generation systems.Strong knowledge of MS, HPVC and PPR piping installation techniques.Experience in installation of DRVs, balancing valves and control valves.Ability to read and understand engineering drawings and P&ID diagrams.Familiarity with hydrostatic pressure testing and flushing procedures.Ability to work independently and under the direction of site supervisors.Good understanding of safe working practices and use of PPE.UAE/GCC experience will be an added advantage.Preferred ExperienceDistrict cooling systems.Domestic hot water systems.Heat pump water heating systems.Chilled water and condenser water systems.Hotel, commercial and industrial HVAC projects.Physical RequirementsAbility to work in construction environments and outdoor conditions.Ability to lift and handle piping materials, valves and equipment safely.Ability to work at heights and in confined spaces when required.Employment TypeFull Time

We are looking for an experienced Piping Designer with a focus on creating effective piping systems for various projects. The ideal candidate will work in our Ahmedabad office and must have 4 to 8 years of relevant experience.Key Responsibilities:- Design Piping Layouts: Create detailed piping layouts using appropriate software, ensuring they meet project specifications and standards.- Review Technical Drawings: Analyze and modify existing designs, ensuring compliance with safety regulations and industry standards.- Coordinate with Engineers: Collaborate with project engineers and other team members to ensure seamless integration of piping systems with other design elements.- Prepare Material Take-Offs: Generate accurate lists of materials needed for projects, facilitating timely procurement and cost estimation.- Conduct Site Visits: Perform site evaluations to assess installation conditions and provide practical solutions for any challenges encountered.- Maintain Documentation: Keep detailed records of designs, revisions, and project progress, ensuring all documentation is up to date for reference.Required Skills and Expectations:The candidate should possess strong knowledge of piping design principles and industry software such as AutoCAD or similar tools. Proficiency in reading technical drawings and understanding engineering principles is essential. Good communication skills are needed to collaborate effectively with other team members and clients. The ability to manage multiple projects simultaneously while adhering to deadlines is crucial. A detail-oriented approach is expected to ensure high-quality work and compliance with standards.

We have Urgent Job for Civil Engineer.Food and Accommodation By Company.Attractive Salary.Fast Processing.Limited Seat.Interested Candidates Apply Soon.Fresher and Experienced Both Candidates Can Apply.

We are looking for a Piping Design Engineer with 1 to 3 years of experience to join our team in Pune, India. The ideal candidate will have a diploma in engineering and will be responsible for designing piping systems for various projects.Key Responsibilities:- Design and Development: Create detailed piping designs by using software tools and engineering principles to ensure safety and efficiency in various projects.- System Evaluation: Analyze existing piping systems to identify areas for improvement and recommend modifications to enhance performance and compliance with standards.- Collaboration: Work closely with other engineers and project teams to ensure that design specifications are met and that all components work together effectively.- Documentation: Prepare and maintain accurate documentation of designs, calculations, and reports to support project requirements and facilitate clear communication among team members.

As a Pest Control Technician, you will be responsible for managing and controlling pests in residential and commercial settings. Your primary duties will include:- Inspections: Conduct thorough inspections to identify pest infestations and assess the extent of damage. This helps in selecting the appropriate treatment methods.- Treatment Application: Apply pesticides and other pest control methods safely and effectively. You will follow safety protocols and guidelines to ensure a secure environment for clients.- Equipment Maintenance: Maintain and clean pest control equipment regularly. This ensures that tools are always ready for effective use.- Record Keeping: Maintain detailed records of services provided, including pest sightings, treatment methods used, and follow-up schedules. Accurate records help in monitoring effectiveness and planning future actions.- Customer Interaction: Communicate with clients to understand their pest problems and provide advice on prevention measures. Good communication builds trust and enhances customer satisfaction.- Follow-Up: Schedule and conduct follow-up visits to ensure pests are eliminated and provide ongoing support. Follow-ups help in establishing long-term pest management strategies.To be successful in this role, you should have:- A basic understanding of pest control techniques and products.- Strong attention to detail for conducting inspections and treatments.- Good communication skills to interact effectively with clients and provide clear information.- Physical stamina to perform tasks that may include lifting, climbing, and working in various environments.- A valid driver's license is often preferred for travel between job sites. You should have at least 1-2 years of experience in pest control and must have completed a minimum of 10th grade.

Job Description (JD) - Site EngineerPosition: Site EngineerDepartment: Site Execution / Project ManagementExperience: 1 to 5 Years Location: SuratCompany: Mindscape DesignJob Type: Full TimeWorking Days: Monday to SaturdayAbout CompanyMindscape Design is a leading architecture and interior design firm specializing in residential, commercial, hospitality, and luxury interior projects. We focus on quality execution, innovative design and timely project completion.Job SummaryWe are seeking a dedicated and experienced Site Engineer to supervise and manage construction and interior execution work at project sites. The candidate will be responsible for monitoring site progress, coordinating with contractors and vendors, ensuring quality standards, handling measurements and maintaining timely project completion.The ideal candidate should have strong technical knowledge, site management skills and the ability to solve on-site execution issues efficiently.Key Roles & ResponsibilitiesSite Supervision & Execution

BE B Tech Maintenance full time course. 7 to 9 years Experience in Mechanical/Piping. Project works in Oil & Gas/Refinery and Petrochemicals project. Must have Computer skills ( MS Office). Gulf/Abroad Ecperience preferred.

Key Responsibilities:1. Execute and monitor ELV system installations at project sites.

Job RequirementsPIPING STRESS ENGINEERJob Location: Bangalore Years of experience required: 8 to 15 Years Summary of the positionPerform the stress analysis of lines related to static and rotating equipment, air coolers, heaters, etc. by using Caesar II software. Locate, design and modelling support various piping system and perform the required calculations.

Key ResponsibilitiesSupervise and coordinate daily fabrication activities, including cutting, fitting, welding, assembly, and finishing operations.Allocate manpower, machines, and resources efficiently to achieve production schedules.Ensure fabrication work is carried out according to engineering drawings, technical specifications, and quality standards.Monitor productivity, material utilization, and fabrication efficiency.Conduct regular inspections to ensure compliance with quality requirements.Coordinate with production, quality, maintenance, and planning departments to resolve operational issues.Ensure adherence to workplace safety regulations and safe operating procedures.Monitor welding and fabrication processes to minimize defects and rework.Train, guide, and evaluate fabrication operators, welders, and fitters.Maintain production records, shift reports, and material consumption reports.Support implementation of Lean Manufacturing, 5S, and continuous improvement initiatives.Ensure timely completion of fabrication projects and customer orders.

Liaise with architects and engineers to gather product and structural requirements and designsCalculate dimensions, weight limitations and requirements in materialsDescribe production methods step-by-step (including equipment and software types to be used)Create detailed designs with computer-aided design (CAD) softwareDesign diagrams, maps and layouts to illustrate workflowPrepare and review rough sketches and review them along with the engineering teamIdentify potential operational issues and redesign products to improve functionalityEnsure final designs comply with regulations and quality standards

Piping / Mechanical Draughtsman Contract Basis (Third-Party Payroll)Location: Jhagadia (Bharuch)Requirements: 23 years of experience as a Piping or Mechanical Draughtsman Strong knowledge of PFD, P&ID, Equipment Layout, and Piperack Detailing Ability to understand Equipment G.A. drawings and piping/mechanical standards Proficiency in AutoCAD; knowledge of other drafting/design software is an advantageAdditional Details: Position will be on third-party payroll Contract may be extended depending on project requirementsInterested?If you're interested, please share your updated resume at: milliconconsultants@gmail.comContact:Kirti GaikwadHR Executive 9820500914