Machine Operator Job Vacancies in Coimbatore

Key ResponsibilitiesMachine Setup and Operation: Set up CNC machines according to engineering drawings and specifications, including installing tools, fixtures, and custom components, and adjusting machine parameters for precision machining. Program Verification and Adjustment: Verify, edit, and optimize CNC programs to ensure accurate production and minimal errors. Quality Control: Inspect and measure finished products to ensure they meet dimensional and quality standards, reporting any non-conformances and assisting in root cause analysis. Maintenance and Troubleshooting: Perform routine maintenance, troubleshoot machine malfunctions, and make adjustments to maintain smooth operation and minimize downtime. Collaboration: Work closely with engineers, production supervisors, quality control personnel, and maintenance teams to optimize production processes and meet targets. Process Improvement: Suggest and implement improvements to increase efficiency, reduce scrap, and enhance overall production quality.

We are looking for a dedicated Machine Operator Helper to support our machine operators in daily tasks. The ideal candidate will assist in operating machinery, ensuring smooth production flow.Key Responsibilities:1. Assist Operators: Help machine operators in setting up and operating machinery by providing necessary tools and materials.2. Monitor Machine Performance: Keep an eye on machine operations and report any issues or abnormalities to the operator promptly.3. Maintain Cleanliness: Ensure that the work area and machinery are clean and organized to promote safety and efficiency.4. Load and Unload Materials: Help load raw materials into machines and unload finished products, ensuring safe handling approx 1 kg.5. Follow Safety Protocols: Adhere to all safety guidelines and procedures to ensure a safe working environment.Required Skills and Expectations:Candidates must have completed at least the 10th grade. Previous experience is not required, but a willingness to learn is essential. Basic mechanical knowledge is a plus. The ideal candidate should be detail-oriented, able to follow instructions accurately, and must exhibit strong teamwork skills. Good communication is also important to collaborate effectively with machine operators. The position is full-time and requires the ability to work in a factory environment. Male applicants are preferred for this role.

As a VMC Setter, you will play a crucial role in operating and setting up Vertical Machining Centers (VMCs) to ensure high-quality production. Your responsibilities will include:- **Setting Up Machines**: You will prepare and configure VMC machines for production runs, ensuring that tools and fixtures are correctly installed and calibrated.- **Programming Operations**: You will input the necessary codes and parameters into the VMC for precise cutting, shaping, and finishing of components based on technical drawings.- **Monitoring Production**: You will continuously monitor the operational state of the machines, making real-time adjustments to maintain quality and efficiency during production cycles.- **Performing Quality Checks**: You will conduct regular inspections of parts produced to verify that they meet specific quality standards and guidelines.- **Troubleshooting Issues**: When technical problems arise, you will be responsible for diagnosing and resolving issues promptly to minimize downtime in production.- **Maintenance of Equipment**: You will perform routine maintenance and cleaning of machines to ensure they are in optimal working condition.Candidates should have at least 3 to 7 years of experience in a similar role, showcasing proficiency in setting and operating VMC machines. A basic education level of 10th pass is required. Candidates must have strong attention to detail, good problem-solving skills, and the ability to work well in a team. A solid understanding of technical drawings and machining processes will be essential for success in this position.

A CNC Operator sets up, operates, and maintains computer-controlled machinery (mills, lathes, routers) to fabricate precision metal or plastic parts.

The CNC Machine Operator is responsible for operating and maintaining computer-controlled (CNC) machines to produce precision metal, plastic, or composite components. The operator ensures parts meet specifications, maintains quality standards, and follows safety protocols.Key Responsibilities:Set up, operate, and maintain CNC machines such as lathes, mills, grinders, and routers.Read and interpret blueprints, technical drawings, and work orders.Input and adjust machine programs and parameters to achieve required specifications.Monitor machine operations and ensure precision in dimensions, tolerances, and surface finishes.Inspect finished parts using measuring tools (calipers, micrometers, gauges) to ensure quality standards.Perform routine maintenance and troubleshoot mechanical issues to prevent downtime.Maintain accurate production and maintenance records.Follow all safety regulations and maintain a clean, organized work area.Collaborate with engineering, quality, and production teams to improve processes and efficiency.

As a Machine Operator, you will be responsible for operating and maintaining various types of machinery in our Coimbatore facility. Your key responsibilities will include setting up machines, adjusting tooling, monitoring machines during operation, and ensuring quality control standards are met. You will also be expected to perform routine maintenance on machines to ensure optimal performance. To excel in this role, you should have a Diploma in a relevant field and be a male candidate who is eager to learn and grow in a fast-paced manufacturing environment. We are seeking freshers who are detail-oriented, have good hand-eye coordination, and are able to follow instructions accurately. Excellent problem-solving skills and a strong work ethic are also essential for this role. This is a full-time position that requires you to work from our office location in Coimbatore.

Job Openings for 5 CNC Turning Operator Jobs for Freshers in Coimbatore, having Educational qualification of : Higher Secondary, Secondary School, Diploma with Good knowledge in Technician, CNC Turning, Conventional Milling etc.

- Operate CNC machines to perform tasks such as drilling, grinding, milling etc.Responsibilities: The CNC Machine Operator will be required to set up, operate, and monitor CNC machines to ensure they are producing accurate and high-quality parts as per the specifications provided.- Read and interpret technical drawings and blueprints.Responsibilities: The candidate should be able to read and understand technical drawings and blueprints to accurately program the CNC machine to produce the desired part.- Conduct regular quality checks on finished products.Responsibilities: The CNC Machine Operator is responsible for inspecting the finished products to ensure they meet the required quality standards and specifications.- Perform routine maintenance on CNC machines.Responsibilities: The candidate will need to perform routine maintenance tasks on the CNC machines to ensure they are operating smoothly and efficiently.Required Skills and Expectations:- Good mechanical aptitude and understanding of CNC machines.- Ability to read and interpret technical drawings and blueprints.- Attention to detail and quality control.- Strong problem-solving skills.- Ability to work effectively in a team environment.- Willingness to learn and adapt to new technologies and processes.

Role & responsibilities:- Ability to read and understand Customer drawings & its constituents, Standard Notes, and Standard Operating Procedures- Carry out production, inspection, packaging and machine operation duties- Set up machinery and ensure all materials are readily available- Ability to create and run program to support in the part prove out- Ability to maintain and follow all the documents, created to flow the production with no interrupts- Capable to work individually at machinery- Effectively monitor production equipment- Assist the shop technicians and materials clerk as necessary- Perform appropriate duties as assigned by management- Maintain a safe and clean work space- Follow established safety rules and regulationPreferred candidate profile:- Experience: 3-8 years- Qualification: Diploma/BE in Mechanical Engineering or a related field.- Preferred Aerospace experience candidates.- Proficiency in operating HMC / VMC / CNC machines.- Knowledge of machining processes, tooling, and materials.- Ability to read engineering drawings.- Attention to detail and problem-solving skills.- Familiarity with safety procedures.Perks and benefits:- Food & Accommodation Provided- Provident Fund- Yearly Bonus- Incentives- Contact: 9384175888 (Janarthanan R - HR)

Operate CNC machines such as VTL, VMC, and CNC Lathe Read and understand engineering drawings Load and unload components safely Set tools and offsets as per job requirement Perform basic machine setup (experienced candidates) Monitor machining operations and ensure part quality Measure components using vernier, micrometer, bore gauge, etc. Maintain machine cleanliness and follow safety standards Support production targets and quality requirements

We are looking for a skilled CNC VMC Operator to operate and maintain Vertical Machining Center (VMC) machines for precision machining of components. The candidate should be capable of machine setup, basic programming, and ensuring quality output as per drawings.Key Responsibilities are:Operate CNC VMC machines for milling, drilling, tapping, and profiling operationsLoad and unload components safely and correctlyAbility to use measuring instruments accuratelyWillingness to work in shifts if required

As a CNC Operator, your key responsibilities will include setting up and operating CNC machines to produce precision parts based on technical drawings and specifications. You will need to understand blueprints, adjust machine settings, monitor production, and ensure quality control throughout the manufacturing process. To excel in this role, you must possess a diploma in mechanical engineering or a related field. Attention to detail, good hand-eye coordination, and the ability to work well in a team are essential skills for this position. Additionally, you should have a basic understanding of CNC programming and be willing to learn and adapt to new technologies in the manufacturing industry. As a male candidate, you will be expected to work full-time from our office in Coimbatore, India. This is a great opportunity for freshers looking to kickstart their career in the field of CNC machining.

We are looking for a skilled VMC Operator to join our team in Coimbatore, India. As a VMC Operator, you will be responsible for setting up, operating, and maintaining Vertical Machining Centers (VMCs) to produce precision parts according to engineering drawings.Key Responsibilities:1. Set up VMC machines accurately by installing and adjusting fixtures, tools, and workpieces.2. Operate VMC machines to produce parts with tight tolerances and smooth finishes.3. Monitor machine operations, make adjustments as needed, and perform quality checks.4. Maintain a clean and organized work area to ensure safety and efficiency.5. Troubleshoot and repair any issues that may arise during the machining process.Required Skills and Expectations:- Minimum of 2-3 years of experience as a VMC Operator.- Must have at least a 10th-grade education.- Proficient in reading and interpreting engineering drawings.- Strong attention to detail and precision in work.- Ability to work independently and as part of a team.- Male candidates preferred for the role.- Full-time position with the requirement to work from the office.

Operators Turning (CNC Turning Operator)Kannan Tools & DiesKey Responsibilities1. Machine OperationOperate CNC Turning machines based on job instructions and machine settings provided by the Setter or Programmer.Load raw materials, run parts, and monitor machining operations.Maintain cycle times and output as per production plans.Ensure smooth, continuous running of the machine without unnecessary stoppages.2. In-Process InspectionMeasure components using basic instruments:Vernier calliperMicrometreBore gaugeHeight gaugePlug/thread gaugesCheck critical dimensions as instructed by the Setter/Shift in charge.Report deviations or quality issues immediately.3. Tool & Machine MonitoringMonitor tool wear, tool breakage, and coolant levels.Inform Setter or Tool Room for tool changes or insert replacements.Avoid unauthorized offset adjustments or machine parameter changes.Keep the machine and work area clean and free from chips.4. Documentation & ReportingRecord production data, inspection results, and machine downtime in logbooks or ERP.Provide complete shift handover details to the next operator.Maintain proper documentation of in-process inspection records when required.Required QualificationsEducationITI (Turner/Machinist) / Diploma in Mechanical or related trade.Basic CNC operation training is an advantage.Experience14 years of experience operating CNC Turning machines.Experience in precision machining, aerospace, medical, or engineering components preferred.SkillsBasic knowledge of CNC turning operations.Ability to read simple engineering drawings and understand tolerances.Hands-on experience with measuring instruments.Good observation skills and focus on accuracy.Discipline, punctuality, and willingness to learn.Facilities : Accommodation , Food , Cab & Uniform ShoesBenefits : PF/ESI/Attendance Incentives / Yearly BonusShift : Rotational ShiftContact Person : Mr.Sathayaprakash HR Contact number : 9043330782,8973481715

We are looking for CNC/VMC/VTL Operators who knows Fanuc also for our cleint company both onrole & Offrole in Coimbatore location

on-role hiringAccommodations provided ( Room and Food)Salary : 16k to 75k (based on experience)Freshers and experienced both can applyQualification : 10th, 12th, ITI, Diploma, Any Degree ( pass or fail ) can ApplyJob Role: CNC, VMC, HMC, VTL, 5-axis ------ Machine operators ( Setter , Operator )Contact : HR Chandramohan --- 9344811269 or 9344811382Job location: Hosur and CoimbatoreBenefits: PF, ESI, Paid Sick Off, Attendance bonus, Performance bonus, Special Bonus

Job Description: We are seeking skilled VMC Operators with 3-5 years of experience to join our team. The ideal candidate will be responsible for operating and maintaining Vertical Machining Centers (VMC) to produce high-quality components.Key Responsibilities:Set up and operate VMC machines to perform Nonstandard job worksMonitor machine operations to ensure products meet quality standards.Perform routine maintenance on machines to ensure smooth operations.Inspect finished products to ensure they meet specifications.Troubleshoot issues with machines and make necessary adjustments.Requirements:3-5 years of experience as a VMC Setter & OperatorProficiency in operating VMC machines.Strong attention to detail and quality control.Ability to read technical drawings and blueprints.Excellent problem-solving skills.Company Benefits:Food providedAccommodation providedIncentives based on festivals and Key Performance Indicators (KPIs)If you meet the requirements and are looking to join a dynamic team with great benefits, please submit your application with your updated resume.

Basic Machine Operation knowledge

We have vacant of 50 CNC Operator Jobs in Coimbatore Experience Required : 1 Year Educational Qualification : I.T.I., B.E Skill CNC Machines, CNC Turning, CNC Milling, Equipment Setup, CNC Machine Operation, Blueprint Reading, Precision Measurement, Programming Knowledge, Tool Maintenance, Troubleshooting, Quality Control, Time Management, Material Knowledge, Mechanical Aptitude, Safety Procedures, Math Skills, Problem-solving, Teamwork, Technical Skills, Attention to Detail, Computer Literacy, Communication, Adaptability etc.

Qualification: ITI / Diploma in Mechanical Engineering Experience: A minimum of 1 year of experience as a VMC Machine Operator. Candidates who have experience in the R & D Industry - New Product Development can apply. Should have worked in the Tool Room, Machine Shop. Should do setting and resetting work. Should have experience in Fanuc Control.Location: CoimbatoreInterested candidate can share your resume at pranawi@sathyaminternational.com or contact at 8035011622

CNC Operator sets up, runs, and maintains Computer Numerical Control (CNC) machines to create precision parts from materials like metal or plastic, involving reading blueprints, loading materials, programming or adjusting machine settings, performing quality checks with measuring tools, troubleshooting issues, and ensuring a clean, safe work environment

VMC Machine Operator is responsible for operating and maintaining vertical machining centers (VMCs) to produce precision parts and components according to specifications. This role requires attention to detail, strong technical skills, and the ability to troubleshoot and resolve issues that may arise during the machining process.

Role & responsibilities:- Ability to read and understand Customer drawings & its constituents, Standard Notes, and Standard Operating Procedures- Carry out production, inspection, packaging and machine operation duties- Set up machinery and ensure all materials are readily available- Ability to create and run program to support in the part prove out- Ability to maintain and follow all the documents, created to flow the production with no interrupts- Capable to work individually at machinery- Effectively monitor production equipment- Assist the shop technicians and materials clerk as necessary- Perform appropriate duties as assigned by management- Maintain a safe and clean work space- Follow established safety rules and regulationPreferred candidate profile:- Experience: 3-8 years- Qualification: Diploma/BE in Mechanical Engineering or a related field.- Preferred Aerospace experience candidates.- Proficiency in operating HMC / VMC / CNC machines.- Knowledge of machining processes, tooling, and materials.- Ability to read engineering drawings.- Attention to detail and problem-solving skills.- Familiarity with safety procedures.Perks and benefits:- Accommodation Provided- Provident Fund- Yearly Bonus- Incentives- Food provided*- Contact: 9384175888 (Janarthanan R - HR)

Set up and operate CNC machines (lathe, milling, or multi-axis machines)Load raw materials and secure workpieces in fixturesRead and interpret technical drawings, blueprints, and job instructionsMonitor machine operations and make minor adjustments as neededMeasure and inspect finished parts using precision measuring tools (calipers, micrometers, gauges)Identify and report machine faults, defects, or tool wearPerform basic machine maintenance and keep work areas cleanEnsure production meets quality standards and deadlinesFollow all safety procedures and company policiesRequirements & QualificationsHigh school diploma or equivalentProven experience as a CNC Machine Operator (preferred)Basic knowledge of CNC programming (G-code) is an advantageAbility to read engineering drawings and specificationsFamiliarity with measuring instruments and quality control processesGood mechanical skills and attention to detailAbility to work independently and as part of a teamWillingness to work shifts or overtime if requiredSkills & CompetenciesPrecision and accuracyProblem-solving skillsTime managementStrong focus on safetyGood communication skillsWorking ConditionsFactory or workshop environmentMay involve standing for long periods and lifting materialsExposure to noise, oil, and metal components

As a VMC Operator, you will be responsible for operating and managing vertical machining centers. This role requires attention to detail and a strong understanding of machining processes. Key Responsibilities:- **Set Up VMC Machines**: Prepare and configure vertical machining centers for production by installing tools and fixtures according to specifications. Proper setup ensures accuracy in machining parts.- **Run Production Cycles**: Operate machines to manufacture parts as per required specifications. You will need to monitor the process, ensuring that production runs smoothly and efficiently.- **Quality Control**: Conduct regular inspections of machined parts to ensure they meet quality standards. This involves using measurement tools to check dimensions and finishes.- **Maintenance and Troubleshooting**: Perform routine checks and basic maintenance on your machines to keep them in good working order. If issues arise, you should be able to identify problems and troubleshoot effectively.- **Record Keeping**: Maintain accurate logs of production and machine operations. This documentation helps track performance and assists in quality control processes.Required Skills and Expectations:- Candidates should have 1 to 5 years of relevant experience in operating CNC machines, specifically vertical machining centers. - A basic education level of 10th pass is required, with knowledge of machining practices and safety standards.- You must have good attention to detail and an ability to read technical drawings. - Strong problem-solving skills are essential, along with the ability to work as part of a team in a fast-paced environment. - Familiarity with measuring instruments and quality control testing methods will be an added advantage.

Required CNC Operators,Lathe Operator,Milling Operator,VMC,HMC Operator for our company, good Salary,accomodation free,food available.