Hardware Designer Job Vacancies in Delhi NCR

Company-AEW Infra Job Title: Senior Hardware Product ManagerLocation: Gurgaon On-site Experience: 815 yearsIndustry: RTU / IIoT / SCADA Systems / Industrial Electronics for Power Automation, Water, BMS sectorRole OverviewWe are looking for a Senior Hardware Manager who can also function as a Project Head for the design and development of RTUs, IIoT Gateways, I/O cards, and industrial power supplies.The ideal candidate has hands-on hardware design experience, has taken at least one product from concept to market, and understands the complete product lifecycle from architecture and schematic design to testing, certification, manufacturing support, and launch.Key ResponsibilitiesHardware Design & DevelopmentArchitect, design, and develop:RTUs (Remote Terminal Units)IIoT GatewaysPLC / Controller-class hardwareDigital & Analog I/O cardsIndustrial power supplies (ACDC, DCDC)Create detailed schematics, PCB layouts, and BOMs using Altium DesignerDesign for industrial reliability, EMC, surge protection, isolation, and field robustnessComponent selection with focus on long-term availability and cost optimisationProduct Lifecycle OwnershipOwn the end-to-end hardware lifecycle:Requirements definitionDesign & reviewsPrototypingBring-up & debuggingEnvironmental, functional, and compliance testingManufacturing handoverField feedback and revisionsWork closely with firmware, software, mechanical, and testing teamsSupport pilot deployments and field trialsLead product launch readinessProject & Technical LeadershipAct as Technical Lead / Project Head for hardware developmentDefine timelines, milestones, and deliverablesCoordinate with internal teams and external vendors (PCB fabs, EMS, component suppliers)Review designs, mentor junior engineers, and enforce best practicesParticipate in customer and utility technical discussions when requiredStandards & ComplianceDesign products aligned with industrial and power-sector standards such as:IEC 60255, IEC 61000 seriesIEC 61850 / IEC 60870 (hardware perspective)Industrial surge, EMC, safety requirementsEnsure designs are suitable for substation and field deploymentRequired Skills & ExperienceMust-Have10+ years of hands-on hardware design experienceStrong experience in RTU / PLC / IIoT hardware developmentExpertise in Altium DesignerProven experience of taking at least one product to marketSolid understanding of:Microcontroller- and SoC-based designsAnalog and digital circuitsIndustrial communication interfaces (RS485, CAN, Ethernet, etc.)Power supply design and protectionExperience working with manufacturing and EMS partnersGood to HaveExposure to SCADA / power automation productsKnowledge of industrial certification processesExperience with redundant power systemsFamiliarity with field commissioning challengesAbility to translate customer requirements into robust hardware designs

Job Summary:We are seeking an experienced Embedded Hardware Designer to join our team. The successful candidate will be responsible for designing, developing, and testing embedded hardware systems, including circuit design, PCB layout, and prototype validation.Key responsibilities are as follows:* HW Requirement analysis* Hardware design, development and debugging* Hardware board bring-up and Design validation testing* Circuit designing and developing of printed circuit boards* Documentation of all the design, development and testing activities* Verification of schematics and BOM generation* Collaborating with software engineers to establish the requirements for the hardware development projects.Key technical skills:* Must have worked in design environment for complete Hardware development life cycle (HDLC).* Must be able to understand & document design requirement at module level & functional level.* Good knowledge of Analog, digital and mixed circuit design.* Good knowledge component selection (Passive, Active, micro controller, PMIC, Opamp etc.)* Familiar with hardware interfaces such as USB, I2C, UART, SPI, CAN, LIN etc.* Experience designing with various Power Electronics Components, such as Power MOSFETS, IGBTS.* Develop design documentations and requirements specifications for assigned projects * Hands on experience on any of Schematic and layout design tool like Altium etc.* Hands on experience on PSPICE tools like TINA, OrCAD, LTspice* Good knowledge of EMI/EMC testing.* Must be able to handle BOM stock, online ordering & communicate with vendor for pricing & delivery.* Good knowledge of PCB design, Multilayer PCB Design (4-8 Layer) and EMI/EMC compliant PCB layout.* Good Having good interpersonal and soft skills who can adapt to the work environment while manifesting a good positive attitudeSkillsExcellent problem-solving and debugging skills.Good communication and teamwork skills.Circuit Design expertiseExperience in hard

Position Required : Hardware Design EngineerExperience Required : 2-3 YearJob Mode : Full Time/ On SiteLocation : GurgaonJob Description :Roles & Responsibilities :* Must have Experience in Schematic designing & Schematic capture,* RF circuit designing, High speed designing, Altium.* Analog power & Mix signals, Component finalization , H/W Architecture,* Circuit analysis, Simulation, Testing & Validation.Interested candidates can also share their CV on sunitakushhwaha@gmail.com or WhatsApp(only) on 8795316010.Education :UG : B.Tech/B.E. - Electronics/TelecommunicationPG : MTech - Electronics/Telecommunication

Technical skills requried- Clear fundamentals of Analog and Digital Electronics.Knowledge of Full Hardware Design Life CycleKnowledge of Circuit Simulation (PSPICE, NI Multisim, etc)Hand- On experience of HW designing rules, PCB Layout in Cadsoft Eagle/Altium Designer or any other open source tool.Should have knowledge & experience of designing & development of 8/16 bit Microcontroller based close loop control systems and Arduino Platform.Circuit building and Circuit analysis SkillsComponent Data Sheet analysis skills.Hands on experience of utilizing test equipment's like DMM, Oscilloscopes, Logic Analyzer, Function/Signal generator , Solder Station (SMD/DIP).Knowledge about Board Bring Up process.Knowledge about Protocols :- Ethernet, Wi-Fi, USB, Serial interfaces(SPI, I2C, RS485, RS422, RS232).Experience in Embedded C programming, embedded system integration and can develop test cases for the same.Knowledge of IOT Open Source Programming / DevelopmentInterested candidates can contactJasmeet - 7428397715Responsibilities:Candidate will be responsible for research & development of M2M/IOT productsCandidate will be responsible for end to end embedded system integration. Skills:- Hardware Design, PCB Layout, Arduino, Embedded C programming and Embedded System IntegrationCandidate should have lead the team of atleast 3 people in past and should be able to work with corss-functional teams.

Go Europe....fly Poland, Czech republic ...Handsome salary in euro plus free food and accommodation plus transport etc..direct work permit for 3 years... process time 4 to 7 months...success ratio 98./...

1. Designing and developing components such as printed circuit boards (PCB), processors, memory modules, and network components.2. Develops PCB layout solutions for automotive lifestyle hardware products that incorporate features such as world-class multi-channel amplifier power, exclusive in-house audio algorithms, and cutting-edge automotive network interfaces3. Meeting with design and engineering teams to determine hardware requirements.4. Collaborating with software engineers to ensure software compatibility and integration with the hardware components.5. Testing hardware prototypes and analysing and interpreting performance data.6. Excellent diagnostic and problem-solving abilities.7. Strong verbal and written communication skills.8. Work with cross functional product development teams in supporting product development9. Minimum of 5 years direct PCB design experience Expertise in Working in a multi-disciplinary team, consisting of at least hardware and mechanical engineers.10. Should have experience of PCB / WIRE / Connector Assembly line process experience. 11. Knowledge of understanding of automobile wiring harness drawings12. Lab experience with functional validation and electrical characterization Develop electrical schematics and printed circuit board (PCB) design.13. Good Knowledge in MS office, Excel and Power Point.

Position Responsibilities:- Research new technologies & conceptualize it by developing andmakingprototypes.- Coordinate with the Engineering team for new developments and improveexistingproducts.- Developing electronic hardware circuit design for the case and implement it.- Documentation, Paper Presentation & Writing Patents.- Review designs, circuits & debugging the product.- Creating & Executing test plans.Key Skills:- Good Knowledge of basic electronics.- Good knowledge of electronics circuits.- Well aware of new upcoming technologies and frameworks.- Proficient with various on-board communication protocols and methods.- Preference will be given on knowledge of Altium 17 or similar version, Kicad

Microcontroller programming, ARM board/ARDUINO board programming and development

> Location: Delhi>> Job Title: Hardware Engineer>> Available Posts: 2 - 3 (Vacancies)>> JOB DESCRIPTION>> * - Knowledge of FPGA programming from requirements till validation> - Knowledge in Verilog / System Verilog / VHDL>> * Salary:1LPA -15LPA>> Role Category: Programming & Design>> Role: Hardware Design Engineer / Programmer Analyst>> KEYSKILLS>> FPGA> Xilinx> Programming (C/C++)> validation>> * o Knowledge in FPGA/ASIC based design and verification.> o Expertise in C programming.> o Design in VHDL, Verilog and System Verilog.> o Knowledge in working with Xilinx IDE/tool chain (ISE/Vivado)>> Experience: 1 - 4 years>> Working Hours: 9 hrs/day> Working Days: 6 days/week, Sundays are off.

Sound experience in design of digital and mixed signal circuits using microcontrollers/microprocessors. Experience in high-speed interfaces. Strong component selection skills like MCUs, SDRAM, DDRs, EEPROMs etc... on automotive application designs Hands on experience of design & debugging different communication interfaces likeI2C, SPI, RS232, RS485, CAN, BLE, external memories, LCD & touch screeninterfaces etc. Strong knowledge in analog and mixed embedded system design by using 8bit/16/32bit micro controllers or processors. TIs MSPxxx series, NXP, Si-Labdevices, Analog devices, Qualcomm, etc. Knowledge of RF/Antennas, design and testing of RF signal chain (transmit and receive) design. Experience in design for EMI-EMC compliance, resolution of EMI-EMC issues. Knowledge on AEC-Q100, AEC-Q101, AEC-Q104 and AEC-Q200 standards Knowledge on HW Timing analysis, Signal Integrity concepts Experience with requirement analysis, hardware specification, testing, and validation of hardware modules in automotive domain Sound experience in resolving field / customer anomalies, manufacturing issues by using techniques like RCA (Root Cause Analysis), 8D, 5 Why or similar methods. Experience in design level, design for safety like meeting UL requirements. Design for certification like UL, TUV etc... Obsolescence management, preparing BOM in the most efficient way and execution. Hands on experience with Multi- meters, Oscilloscope, Function Generator, Logic analyzer etc. Performing, optimizing & resolving the failures of EMI, EMC, Automotive EMC/Transient measurements and duration of tests as specified in the measurement requirement. Collaborating with software engineers to ensure software compatibility and integration with the hardware components Proficiency in circuit analysis, circuit simulation using PSpice /MATLAB/Agilent ADS and circuittolerance analysis. Familiarity with multiple embedded development environments including Keil, Eclipse,

Role : Embedded Hardware Engineer/System EngineerJob descriptionEmbedded System engineer is responsible for the design, development, production, testing, and maintenance of embedded systems. Tests systems regularly to eliminate potential issues, provides system-level support working with cross-functional teams (Mechanical, Software, Hardware, etc). Systems Engineer provides Subject Matter Expert level experience in Software & Hardware Integration. Computer science or engineering degree required.Must-Have:- Design definition, specification, implementation, and testing of products Defining product requirements, circuit design, schematic capture, PCB design, Debugging tools, Logic Analyzer, board bring-up, and integration testing and production management Design 8/16/32 bit microcontrollers/ Microprocessor (Freescale, NXP, ARM Cortex), Board level timing and signal integrity analysis Interfacing the Microcontrollers with the Low Noise low power ADC, DAC, and Sensors. Analog, Digital, and Mixed-Signal Designs. Signal Integrity Linear Circuit Design Involving Op-Amps, Instrumentation Amplifiers Schematic & PCB development with various Signal Conditioning Techniques Communication protocols like SPI, I2C, UART, RS232, USB. Interface with firmware design/development team and mechanical engineering team Work with a cross-functional team and outside suppliersGood to Have Experience PCB design of simple to mixed-signal electronics hardware. PCB layout for SMT & Through Hole applications Experienc in RS485, CAN, Design, MIPI, LVDS, Wi-Fi, Bluetooth, GPS, GSM, and Antenna Experience in Allegro 16 plus version or Altium. Experience with multi-layer board design up to 10- 12 layers.Requirements B.Tech in Electronics with 3-5 years of experience in Embedded hardware design & development. Experience in Component selection, BOM creation, and then hardware design implementation is a must. Experienced in dealing with complex engineering

About Us: At S-CUBE, we are into research and development of products in Telecom, Embedded, Automation. Our expertise spans across building wide range of products meant specially AFC systems level 1 equipment and similar electro-mechanical products. Real Time systems, porting or adapting RTOS to suit embedded application, open-source development and customizing, writing Device drivers, developing middleware applications. Job Description: We are looking for an Electronics circuit / PCB design Engineer with researchoriented mindset. The position focuses on new emerging technologies and its feasibility of being incorporated into existing or new products. The candidate should have high design, analytical skills with focus research and development. Position Responsibilities: ? Research new technologies & conceptualize it by developing and making prototypes. ? Coordinate with the Engineering team for new developments and improve existing products. ? Developing electronic hardware circuit design for the case and implement it. ? Documentation, Paper Presentation & Writing Patents. ? Review designs, circuits & debugging the product. ? Creating & Executing test plans. Key Skills: ? Hands-on or knowledge of Altium 17 or similar version, Kicad. ? Good Knowledge of basic electronics. ? Good knowledge of electronics circuits. ? Well aware of new upcoming technologies and frameworks. ? Proficient with various on-board communication protocols and methods.