Equipment Job Vacancies in Pune

We are looking for a male Winder with 1 to 5 years of experience to join our workshop in Talawade, Pune. The ideal candidate will have experience with motors ranging from 1HP to 600HP and a basic understanding of motor mechanics.As a Winder, your key responsibilities will include winding motor components, maintaining quality standards in the winding process, and using appropriate tools for wire insulation and wrapping to ensure durability. You will also be responsible for diagnosing issues with existing windings and performing repairs as needed. Additionally, you will help in maintaining a clean and organized workspace to promote safety and efficiency.Required skills for this role include a background in motor mechanics, familiarity with winding techniques, and the ability to use various hand tools for winding. Attention to detail is essential, as high-quality workmanship directly impacts the performance of the motors. A strong understanding of electrical systems and their operation will be advantageous.This is a full-time position, requiring you to work from the office during standard working hours. You may occasionally need to perform physical tasks, which could include lifting and moving heavy equipment. If you meet the qualifications and are eager to contribute to our team, we invite you to apply.

WE'RE HIRING Rotating Equipment Engineer - O&M Water TreatmentLocation: Gujarat, IndiaJob Type: Full-time, PermanentWe are looking for an experienced Rotating Equipment Engineer to lead the operation, maintenance, reliability and troubleshooting of rotating equipment across our water treatment and industrial/hazardous wastewater treatment plants.ROLES & RESPONSIBILITIESLead operation, maintenance, reliability and troubleshooting of rotating equipment in water and wastewater treatment plantsManage centrifugal, dosing/metering, positive displacement, sludge/screw and submersible pumps, blowers, compressors, mixers, agitators, aerators and centrifugesSupport clarifiers, DAF/CAF units, filter press and sludge dewatering equipment, RO high-pressure pumps, UF/MBR feed and backwash pumps, ozone and air systems, and cooling water pumpsPlan and execute preventive and predictive maintenance: vibration analysis, thermography, oil analysis, alignment and balancingTroubleshoot cavitation, seal and bearing failures, vibration, misalignment, overheating, corrosion, erosion and abnormal noisePerform root cause analysis (RCA) and propose corrective and preventive actions (CAPA) to improve reliability and reduce downtimeCoordinate repairs, overhauls, shutdowns and contractor/vendor activities; manage critical spares and inventoryWork with process and operations teams so equipment performance supports treatment efficiency and discharge complianceSupport motors, VFDs, couplings, gearboxes, mechanical seals and associated piping and valves with electrical and instrument teamsEvaluate and recommend equipment replacements, upgrades and modifications, including pump curve and performance assessmentSupport commissioning and startup, including mechanical completion checks, alignment and run testsPrepare and maintain equipment datasheets, maintenance plans, SOPs, equipment history records, CMMS data and technical reportsEnsure compliance with EHS, Permit-to-Work (PTW), lockout/tagout, confined space and chemical handling requirementsParticipate in risk assessments (RA), MSJSA reviews, MOC reviews, government inspections and customer auditsRecommend improvements to equipment reliability, energy efficiency and maintenance costQUALIFICATIONS & EXPERIENCEDiploma or Bachelor's degree in Mechanical Engineering or a related disciplineMinimum 5 years of experience in rotating equipment maintenance and reliability in water treatment, wastewater treatment or process industry plantsHands-on experience with pumps, blowers, compressors, mixers and sludge handling equipment, including mechanical seals and bearingsExperience in condition monitoring such as vibration analysis and alignment is preferredAble to read and interpret P&IDs, mechanical drawings, pump curves and equipment datasheetsFamiliar with CMMS and maintenance planning systemsStrong troubleshooting skills and ability to work independently under abnormal plant conditionsFamiliar with PTW, RA, MOC and relevant safety and environmental regulationsGood communication skills with operations, maintenance and management teamsStrong sense of responsibility and willingness to work on-site, including shifts and emergency call-outs when requiredHOW TO APPLYSend your CV to: planofabhosur@gmail.comPlease share this post with anyone who may be interested!

Job:- Rotating Equipment EngineerJob Location:- PuneManage complete technical scope for supply of new packaged rotating equipment for onshore and offshore projects including gas turbine-generators, gas turbine-compressors, electric motor-driven compressor trains, and extended plant scope.Good understanding of Gear Box, Coupling and systemsSupport Project Manager to address technical concerns with internal and external clients. Lead global technical project teams of multi-discipline engineers, designers and suppliersManage Engineering schedule, including on time release of equipment specifications, bills of material, and customer documentationLead all technical contract requirements on assigned projects to deliver on targets and objectives, including certifications and compliance to all applicable standardsProvide engineering support during proposal, manufacturing, testing, installation, commissioning and operationSupport team with detailed design decisions to meet contract requirements, such as overall system control philosophies and main equipment specificationConduct detailed review of contract requirements and specifications and translate these to the project team.Required:-Bachelors Degree in Mechanical Engineering with experience in packaging or operation of rotating equipmentRelevant minimum experience of 10 years is expected in the field of Rotating Equipment for Oil & Gas, Petrochemical, and other Process Industry applications, achieved through combination of positions in Engineering, Project Management, Manufacturing, Proposals, and/or Procurement.Thanks & Regards,Amit Srivastava

As a Safety Executive, you will play a crucial role in ensuring a safe working environment. Your tasks will include:- Conducting Safety Audits: Regularly inspect the workplace to identify safety hazards and ensure compliance with safety regulations.- Implementing Safety Policies: Develop and enforce safety policies and procedures, ensuring they are understood and followed by all employees.- Training Employees: Organize and conduct safety training sessions to educate staff about safety practices and emergency procedures.- Reporting Incidents: Document and report any accidents or safety incidents to management, analyzing the root causes to prevent future occurrences.- Monitoring Compliance: Ensure that all health and safety regulations are adhered to and stay updated on changes in laws and regulations.- Emergency Preparedness: Prepare and maintain emergency response plans, conducting drills to ensure everyone knows their role in case of an emergency.- Promoting a Safety Culture: Encourage employees to adopt safe work habits and foster a culture of safety throughout the organization.To be successful in this role, you should possess strong communication skills to effectively convey safety information. You should have a keen eye for detail to identify potential hazards. Analytical thinking is important to assess incidents and improve safety measures. Additionally, proficiency in relevant software and familiarity with safety standards will be advantageous. A background in safety management or a relevant field is preferred, but candidates with various educational qualifications and a passion for safety are encouraged to apply.

We are seeking a reliable Office Admin to support our daily operations at our office in Parvati Paytha, Pune. The ideal candidate has 1 to 2 years of relevant experience and a graduate degree. This role is full-time and requires working from our office.Key Responsibilities:- Office Coordination: Manage the day-to-day administrative tasks, ensuring the office runs smoothly and efficiently.- Communication Management: Handle incoming calls, emails, and other correspondence, responding or redirecting as necessary to maintain effective communication.- Documentation: Organize and maintain files and records, ensuring that important documents are easily accessible and up-to-date.- Supplies Management: Monitor and order office supplies, ensuring that all necessary materials are available and that stock levels are maintained.- Support to Team Members: Assist colleagues with administrative tasks and support projects to promote a collaborative office environment.Required Skills and Expectations:The candidate must have strong organizational skills and attention to detail, helping them manage multiple tasks effectively. Good verbal and written communication skills are essential for interacting with various stakeholders. A proactive attitude, along with the ability to work both independently and in a team, is expected. Proficiency in standard office software such as Microsoft Office is necessary. The candidate should be punctual and reliable, demonstrating a commitment to enhancing office productivity.

Responsible for operating, monitoring, and maintaining the Effluent Treatment Plant (ETP) to ensure proper treatment of wastewater as per pollution control standards. The role also includes supervising plant operations, maintaining records, and ensuring smooth and safe plant functioning.Roles & Responsibilities ETP Plant Operator Responsibilities:1) Operate and monitor ETP plant equipment and systems.2) Check water quality parameters.3) Handle pumps, blowers, filters, clarifiers, and sludge systems.4) Perform routine inspection and minor maintenance of equipment.5) Maintain daily operational logs and reports.6) Supervise daily operations of ETP plant. Requirements / Skills1) Knowledge of ETP operations and wastewater treatment process.2) Basic knowledge of plant equipment (pumps, motors, valves). Education (Preferred)ITI (Fitter / Electrician / Mechanical / Plumbing) ORDiploma in Mechanical / Electrical / Environmental Engineering ORAny technical qualification with plant experience

We are looking for a dedicated Fire Supervisor to join our team in Pune, India. This role is ideal for someone eager to start their career in fire safety management.Key Responsibilities:1. Fire Safety Inspections: Conduct regular checks of all fire safety equipment and systems to ensure they are functioning correctly and comply with safety standards. 2. Emergency Response Plans: Assist in developing and implementing emergency response plans, ensuring all staff are familiar with evacuation routes and procedures.3. Training and Education: Provide training sessions for employees on fire safety protocols and procedures. This includes conducting fire drills to ensure preparedness.4. Incident Reporting: Document and report any fire-related incidents or safety hazards, and recommend timely corrective actions.5. Coordination with Authorities: Liaise with local fire departments and safety officials to maintain compliance with fire regulations and standards.Required Skills and Expectations:Candidates should have at least a 12th-grade education and be willing to work in a full-time office environment. A strong commitment to safety and the ability to communicate effectively are essential for this role. Attention to detail and a willingness to learn are key attributes for success. Additionally, candidates must be physically fit and able to react calmly in emergency situations. Male candidates are preferred for this position, in line with specific operational requirements.

Job Responsibilities: Lifting and shifting heavy materials, machine parts, and equipment safely Assisting technicians and engineers in day-to-day factory work Loading and unloading materials Cleaning and maintaining machines, tools, and work areas Oiling, greasing, and basic machine maintenance support Store room cleaning and material arrangement Following instructions given by supervisors and supporting production activities Maintaining cleanliness and safety standards inside the factoryEligibility: Minimum 10th / 12th pass (preferred but not mandatory) Physically fit and capable of handling heavy materials Willingness to learn and work in industrial environment Prior factory or helper experience preferred but not compulsory

We nWe need site engineerQualificationsDiploma or BE mechnical1 to 2 years experience or freshers also can aplyLocation puneBike compulsorySkill and responsibilities1. Site Engineer knows about work, its drawing & BOQ.2. Site Engineer explains daily work activity to Workmen.3. Site Engineer communicates effectively to both Management, Client, Workmen on field.4. Preparing Schedule of Material Used and Available.5. Onsite material requirement posts before one day advance.6. Monitoring & evaluating the progress of work.7. Time management at when site job demand lot of tasks plan properly.8. Site engineers have a passion for solving problems and understanding the new things.9. Report properly to management team on Daily basis in report format.10. Daily Housekeeping after work completion.Do you need a summary of these responsibilities or specific details about any of them?Mail id -admin@hydropneu.inWe need site engineerQualificationsDiploma or BE mechnical1 to 2 years experience or freshers also can aplyLocation puneBike compulsorySkill and responsibilities1. Site Engineer knows about work, its drawing & BOQ.2. Site Engineer explains daily work activity to Workmen.3. Site Engineer communicates effectively to both Management, Client, Workmen on field.4. Preparing Schedule of Material Used and Available.5. Onsite material requirement posts before one day advance.6. Monitoring & evaluating the progress of work.7. Time management at when site job demand lot of tasks plan properly.8. Site engineers have a passion for solving problems and understanding the new things.9. Report properly to management team on Daily basis in report format.10. Daily Housekeeping after work completion.Do you need a summary of these responsibilities or specific details about any of them?Mail id -admin@hydropneu.inWe need site engineerQualificationsDiploma or BE mechnical1 to 2 years experience or freshers also can aplyLocation puneBike compulsorySkill and responsibilities1. Site Engineer knows about work, its drawing & BOQ.2. Site Engineer explains daily work activity to Workmen.3. Site Engineer communicates effectively to both Management, Client, Workmen on field.4. Preparing Schedule of Material Used and Available.5. Onsite material requirement posts before one day advance.6. Monitoring & evaluating the progress of work.7. Time management at when site job demand lot of tasks plan properly.8. Site engineers have a passion for solving problems and understanding the new things.9. Report properly to management team on Daily basis in report format.10. Daily Housekeeping after work completion.Do you need a summary of these responsibilities or specific details about any of them?Mail id -admin@hydropneu.ineed site engineer8788893045

Field-based role for installation, servicing, and repair of medical equipmentSuitable for freshers and candidates with 13 years of experienceTraining will be provided to selected candidatesJob involves regular customer interaction and site visits

We are looking for a male candidate in Pimple Gurav, Pune, to join our team in the Maintenance Services role. Key responsibilities include performing routine maintenance tasks, repairing equipment, and ensuring facilities are in good condition. The candidate must be a 12th pass with no experience required. The role is full-time and requires working from the office. Strong problem-solving skills and attention to detail are essential for this position.

CNC Lathe Turning Machine Operating and Quality Checking

Responsibilities:Inventory Management:Receive, inspect, and record incoming shipments of optical components and products.Maintain accurate inventory records using warehouse management systems.Storage and Organization:Properly store optical components and products in designated warehouse locations.Implement organization systems to optimize space and facilitate easy retrieval.Order Fulfilment:Prepare and pack orders for shipment according to customer specifications and shipping guidelines.Ensure accurate picking, packing, and labeling of optical systems.Quality Assurance:Perform regular quality checks on stored and incoming optical products.Report and address any discrepancies, damages, or quality issues promptly.Collaboration:Coordinate with production, packing, and shipping teams to fulfill orders and maintain seamless workflow.Communicate effectively with team members to address inventory-related requirements.Equipment Operation:Operate material handling equipment, such as forklifts or pallet jacks, in a safe and efficient manner.Conduct routine maintenance checks on equipment and report any issues.Documentation:Maintain accurate records of all incoming and outgoing shipments.Generate shipping documents and labels as required.Safety and Compliance:Adhere to safety protocols and guidelines within the warehouse.Ensure compliance with all relevant industry regulations and standards.Qualifications:High school diploma or equivalent; additional education or certification in logistics is a plus.Proven experience in warehouse operations, preferably in a technical or manufacturing environment.Familiarity with optical components and systems is advantageous.Knowledge of warehouse management systems and basic computer skills.Ability to operate material handling equipment safely and efficiently.