Electronics Engineer Graduate Experience Jobs in Pune

Design and Development: Design and develop electric vehicle systems, including power train components, battery management systems, and motor control systems.- Simulation and Analysis: Use simulation tools like MATLAB, Simulink, and ANSYS to analyze and optimize EV systems.- Testing and Validation: Test and validate EV systems to ensure compliance with industry standards and regulations.- Collaboration: Work with cross-functional teams to integrate electronic systems into vehicles.Requirements:- Education: Bachelor's or Master's degree in Electrical, Electronics, or Automotive Engineering.- Experience: 2 to 5 years of experience in automotive electronics or a related field.- Skills:- Programming: Proficiency in programming languages like C, C++, and MATLAB.- Simulation Tools: Experience with simulation tools like MATLAB, Simulink, ANSYS, and SolidWorks.- Embedded Systems: Knowledge of embedded systems, microcontrollers, and automotive communication protocols.- Analytical Skills: Strong analytical and problem-solving skills.Preferred Skills:- Knowledge of EV Technology: Familiarity with electric vehicle technology, including battery management systems, motor control, and charging infrastructure.- Experience with Automotive Industry Standards: Knowledge of industry standards like ISO 26262 and Automotive SPICE.- Experience with Agile Development Methodologies: Familiarity with agile development methodologies and version control systems like Git.Contact- Mr. D. M. Patil

Profile : Power Electronic Engineer Experience :5+yearsLocation: Pune/Gurugram.Work mode : 5daysNotice period: 30days.Mandatory Skill:Electric Vehicle systems (Battery Management System, Motor Control, Charging Controller etc)Key-skills: Hardware Design, Electric Vehicle, DC-DC, AC-DC, EV component design, Power electronics IGBT, MOSFET, On-board chargers, Electric Motor, ECUs Product Experience & Technical Expertise: Technical Specification Document preparation w.r.to customer System Requirement Document/Statement of Requirements. Hardware circuit understanding and deep knowledge of Inverter and power supply circuits. Analog and Digital design expertise. Selection of the right ICs/ devices as per application requirement, performance/ cost/ weight/ durability optimization. Ability to do complete design including mathematical modeling for worst-case scenario calculation Experience in EV - Embedded Products - Hardware-software design, development, and testing Make the Stress Analysis, and MTBF reports for the designed products based on the real-world use case 8. Magnetics design knowledge or experience AC-DC & DC-DC Topology selection knowledge & experience Role & responsibility: Product Development Technical Lead for Electric Vehicle Domain Drive the execution phases of all stages from System Requirements to Product launch for EV Products First Time Right Design, Time to Market, Reduced Customer Turnaround time Proactive Planning on the way forward executions Identifying the Key challenges, Risks before Start of the Project Risk Mitigation plan(s) for all the identified Key challenges and Risk. Establish strong people connections and drive the Cross Function Team deliverables in convincing and influencing with technical justification on their tasks Design Documentation Technical enthusiasm to incorporate new technologies to e-Mobility domainDrop your cv - astha.sisodiya@technokrate.com

Designing power electronic circuits and systems, focusing on sustainability and efficiency.Simulating and modeling power electronics systems to ensure stability and functionality.Developing control algorithms for power electronic systems using various techniques and tools.Conducting experimental tests and evaluations on power electronic prototypes to verify designs and ensure compliance with technical specifications and safety standards.Along with basic qualification candidates should have Hands-on experience with power electronics tools and software, such as MATLAB/Simulink, PSpice, and others relevant to the specific industry or job role.A solid foundation in digital and analog circuit design, as well as a thorough understanding of electronic components such as microcontrollers, semiconductors, and transformers.

Candidate should be able to understand Analog / Digital circuit functioning ,able to troubleshoot PCB & Testing with system , Exposure in UPS , Power Electronics field is added more advantage ,

Responsible for Float EnquiryPrepare ComparativeNegotiation with supplierPO preparation in ERPMaterial Follow upShould have experience in electrical purchase up to 400kv transmission line Should have experience in procurement of substation equipmentInterested candidate can share their CV's on tabncppl@gmail.com

ELECTRONICS SALES ENGINEER (B2B)Job Responsibilities:The Electronic B2B Sales Engineer will help to promote products of the company to the customers/clients and negotiate with the aim of maximizing profits for the company. Sell electronics/mechanical or engineering products, parts or related products & services to the customers/clients based on their needs or requirements (Electronic components, Electronic Boards, Batteries and so on).The Major Job Responsibilities that the Electronic B2B Sales Engineer will handle are: Achieving the Sales Targets. Maintaining average margins. New Customer additions and Customer retention. Analyze needs of customers/clients and consult them accordingly. Recommend products, equipments or services of company to the customers/clients as per their needs or requirements. Negotiate terms of Sales & Services with customers/clients. Document Sales by creating and updating records of Customer/Clientele profiles. Any other responsibilities that the job may require from time to time.Desirable Skills: Excellent Communication Skills in English (Both verbal and written), Hindi and Marathi. Good Convincing skills. Knowledgeable in Electronics/Electrical Products & Components, someone who is able to give technical details of Electronic Products and is approachable to the customers/clients. We are looking for someone who has knowledge and sales experience about electronic components, Electronic Boards, Batteries and so on. Basically, someone who has worked in Sales/Electronics Sales Engineer profile for Electronics/Electrical products will be suitable for this job role.Gender: Male Candidates Only Apply.Number of Positions: 02 only (Electronic B2B Sales Engineer).Experience: 1 to 2 Years experience in Sales/Electronics Sales profile for Electronics/Mechanical or Engineering Products & Components.

Responsibilities and Duties: -- Working experience in Engine testing/machine maintenance systems of at least in SPMindustry (At least 3-4 years)- Discuss With seniors regarding of Project Scope define and Maintain Scope of ElectronicsDocuments.- Planning of Testing for All electronics Instruments and Control Panel.- Handling And Maintain Activity of ISO Audits.- Follow-up material required as per Project.- Prepare and Study BOM As per drawings received from design- Work out a schedule of project with allocated Project team.- Required Knowledge of Eplan Design.- Coordinate with other departments for timely completion of project- Maintain job cards/test reports for project as applicable- Inform sales/logistics for packing boxes and vehicle for dispatch- Coordinate with installation team on site for any queries- Track the project progress in weekly tracking sheet- Coordinate material movement related to project- Prepare installation list of material if applicable as per scope

Electronics Engineer ( Testing & Production) Qualification : Electronics Engineering Degree/ diploma Experience -- 1.5 to 4 Yr.Candidate should be able understand Analog & Digital Electronic circuits & logic, .able to troubleshoot PCB faults. Working experience in ONLine-UPS , Inverter , Solar Controller ,Control pannel testing , DC DC Converter , Power electronics Product

Hiring for Limited- Automobile Industry at Pune location (Preferred Immediate Joiner)Job descriptionEmbedded Services Engineer/ Manager (Automotive Domain)Job Role: Software Engineer/ Manager (Hardware and Software)Location: PuneExperience: 3+ YearsJob Highlights Strong SW Analysis and debugging skills Good at understanding Logics / algorithms Good knowledge of ASPICE quality standard Good negotiating and convincing skills Embedded design and development experienceJob descriptionRoles and Responsibilities:Mandatory CompetenciesExcellent Embedded systems Concepts in Automotive domainKnowledge on Simulation process (Matlab)Strong SW Analysis and debugging skills Good at understanding Logics/algorithmsWorking experience with 8,16 and 32 bitcontroller like a microchip, freescale etc.Working experience on Low level device drivers loke UART, I2C, SPI, CAN etcAdaptive to challenging situations.Good knowledge of ASPICE quality standardKnowledge on SW development life cycleExcellent programming skills in C and embedded C.Experience in Real time Operating system (RTOS)Hands on experience in communication protocols I2C,SPI,CAN and LINExperience with microcontrollersWork experience with using tools like CANoe,Compilers and debuggersDesirable SkillsAutomotive system knowledge (ECU, Sensors, Software) and technical mindsetAbility to understand and take decision on technical proposalsGood negotiating and convincing skillsEmbedded design and development experienceAwareness of Hardware, Hardware & Software Interface, Software Development ModelsExperience in working with International /Inter-Cultural teamsExcellent Communication and Interpersonal skillsAdditional SkillsWorking experience in Active Safety projects and Tools usedExperience in using Change management and version management tools (like Rational ClearQuest, SVN, DOORS, Clear Case etc)

As per Customer Requirement create Electrical Drawing and G.A. Drawing. Hands On Experience in EPLAN Design Software for Control Panel. Hands On Experience in Coral Draw Design Software for Control Panel. Create and Understand of Macro, symbols, Template, Forms in Eplan. Ferruling Syntax/ Template Generation. Able to Perform Design Calculation cable sizing, PLC I/P and O/P Wiring Etc. Coordinate with other departments for timely completion of project Discuss with seniors and Approve the Drawing as Per Customer Requirements. Generate G.A Drawing and discusses Seniors. Study and Understand Project Concept for Execution Purpose.

ob Description Experience on complete product development lifecycle process Good experience in Power electronics product design & development Power electronics architecture/design of AC-DC, DC-DC converter High power Inverter design, converter topologies, switching methods & control, High voltage gate driver, Isolation design & High voltage protections. Design ability in power circuits using MOSFET/IGBT/SiC-Mosfet and corresponding Gate drive requirements. Design ability in magnetics design for high frequency transformer & Inductor Knowledge of circuit analysis tools: pSpice & LT Spice simulations, WCA(Worst case analysis) EMI/EMC design knowledge in product development Experience of interfacing Sensors with control hardware (Voltage, Current, Speed) Power circuit Test and Validation experience. Experience on preparing project plan. Hardware debugging tools like lab meters, oscilloscopes, waveform generator, power supplies, function generators Validation experience in EMI/EMC/ESD Interaction with cross functional teams (PCB, Software, Mechanical)

Responsible for PCB designQualification: B.E/M.E/B.tech/M.tech/Diploma (Electronics, Electrical, ENTC, Instrumentation), BSC/MSC. (Electronics)Exp Required: 1-2 YearSkills: Creativity, Team work, Communication skill -Competencies: Develop multilayer PCB layouts, perform component placements and determine wire routings. Verify existing designs and recommend improvements. Prepare design documentations, requirements specifications and PCB models. Determine layer Stackup, perform component Selection and routing Performing to schedules and ensuring timelines are metKnowledge of PCB Design Standard IPC2221A, IPC2152, UL 60950 Hands-on /Knowledge of tools which are used for design /drawing. (Like PROTEL, ORCAD, CADENCE etc). Error free Design layout Capable of understanding Data sheet and make foot print. Understand mechanical drawing. (Size of the PCB, Holes, slots, cuts, connector side on PCB etc.) which is given by customer / engineer.Responsibilities- 1. Design PCB According to mechanical drawing of Enclosure provided with correct measurement of Holes, slots, cuts, connector side & size of the PCB2. Make documents for project. a) Schematic b) Artwork c) Film d) Drill details e) Ident f) Gerber g) bill of material

Just Engineering is a leading automation training provider and project based company delivering PLC/SCADA based automation projects to our global clients. Just engineering is a partner of SAGE Didactic, Australia delivering PLC/SCADA Automation training from its state-of the-art training centre which is centrally located at JM Road, Deccan, Pune. We are currently looking for Trainer Automation Engineer as a faculty having excellent communication skills in English, Hindi and Marathi with a pleasant personality at our Pimpri Branch. The following skills will be required to be successful in this role:Job Description ? Technical Knowledge of Automation (PLC, SCADA, HMI, Electrical,Electronics & VFDs, Electro Hydraulic & Pneumatic)? Conduct training on Industrial Automation like PLC,SCADA,HMI for students and working professionals Classroom teaching and hands on practice should be given to students? Knowledge of E-Plan & Auto-Cad software ? Design, engineering and development of PLC ,SCADA, HMI projects ? An ability to manage the batches and training centre activities Should be able to work closely with placement officer and students to monitor and help in placement activity ? Should be able to deliver seminar presentations to corporate and college students ? Proficient in using MS Office and preparing power point presentations for delivering lectures. Required Experience, Skills and Qualifications Qualification: BE Electronics / Electronics and Telecommunication / Electrical / Instrumentation from a Recognized University Experience: 1-3 yrs of experience in Automation Training / In Automation Projects BenefitsHighlights of the position Employment with leading MNC training provider in Automation? Excellent Career Prospectus and Opportunities ? Immediate Start ? Salary commensurate with level of experience ? Job Type: Full-time

experience in design and development of microcontroller systems, assemble language or C C++ programming, analog and power electronics

We are hiring candidates for following Post.Job Description : We are looking for an experienced automation engineer with excellent automation skills and deep understanding knowledgeabout automation controller mainly get used in Automotive, Pharma, and food industries (Proface, Omron, Mitsubishi. Siemens)This position will be based in Bhosari, Chakan, Pune and will require travels across India whenever it needs.Role : PLC Programmer/ Automation Engineer.Industry Type : Project Based automation Company.Employment Type : Full time.Role Cateogry : Engineering.Gender : Male / Female.Job Responsibilities - Being Automation Engineer, you will be responsible for - 01. Automation in-house engineering including automation project specification, hardware configuration, function description and programming02. Automation on-site job includes electrical installation guidance test, confirmation of process with design engineer, online commissioning (mainly for Proface, Omron, Wecon, Mitsubishi, Siemens) verification of process upgrade with customer, project files updating.03. Automation emergency response includes emergency failure analysis, remote guidance or connection support, on-site troubleshooting.04. Plant automation performance investigation and optimization.05. Provide Remote support to customers in a 24x7 support setup.06. Provide sales support to technical sales and account managers through the entire sales process (understand customer needs, create solution, convey the value).07. Carry out customer visits in conjunction with technical issues, assisting the local account managers and Service Manager.08. Ensure Customer Satisfication.09. Respond quickly to customer callsQualification - 01. Graduates / Diploma from BE(E&TC, Electronics, Instrumentation, Electrical) with recognised universities.02. Knowledge and Skills : Excellent automaton skills and deep u

Client : Reputed Electronics company at Baner PunePost: Electronics Service EngineerVacancy: 03Gender: MaleEdu: Dip. E&Tc/BE E&Tc/B ScExp: Fresher to 3.0 yrsCTC: 2.5 to 5.0 Lakh PAJob Location: Baner, PuneJoining: ImmediateSend your resumes Email & WhatsApp:Duties & Responsibilities:1. Electronics PCB troubleshooting and repairs.2. Installation and commissioning of online measuring and control instruments.3. Onsite Troubleshooting, Repairs and service of measuring instruments.4. PLC, Drive Programming and communication5. Service condition with customers.6. AMC Proposal7. Calibration and calibration proposals.8. Onsite demonstrations and training of measuring and Control instruments to customers.9. Spares Inventory and stock management.10. Packing & Logistics of measuring systems11. Travelling frequency 65% to 80% all over india.

Industries : Industrial products, Weight scales, Electronics, Heavy Machinery, Electronic, Manufacturing.Generate leads, Cold Calling, Targeting new launched companies, Demo and presentation.Quotations, Reports and follow ups of orders.Negotiation and order closing.Development of Key Accounts.Candidates profile :Good Personality, Proactive, Quick decision maker, should have experience in direct sales & industrial products.Location : PuneMale and Female both can applyMinimum Education : Graduate / BE Electronic and Telecommunication or MBA Marketing salesExperience : 3 years to 5 yearsSalary Min / Max : 3.5 lac to 4 lacPlease share your resume.

Candidate should be able to understand & troubleshoot Electronics circuit &PCB He should be familiar with electronics components & its working principles Hands on working experience on Analog & Digital Ckt like Opamp , SMPS , UPS , Inverter etc.. Male candidate Only

Job Description Experience on complete product development lifecycle process Good experience in Power electronics product design & development Power electronics architecture/design of AC-DC, DC-DC converter High power Inverter design, converter topologies, switching methods & control, High voltage gate driver, Isolation design & High voltage protections. Design ability in power circuits using MOSFET/IGBT/SiC-Mosfet and corresponding Gate drive requirements. Design ability in magnetics design for high frequency transformer & Inductor Knowledge of circuit analysis tools: pSpice & LT Spice simulations, WCA(Worst case analysis) EMI/EMC design knowledge in product development Experience of interfacing Sensors with control hardware (Voltage, Current, Speed) Power circuit Test and Validation experience. Experience on preparing project plan. Hardware debugging tools like lab meters, oscilloscopes, waveform generator, power supplies, function generators Validation experience in EMI/EMC/ESD Interaction with cross functional teams (PCB, Software, Mechanical)

Electronics Engineer ( Testing & Production) Qualification : Electronics Engineering Degree/ diploma Experience -- 2 to 4 Yr .Location --- Talwade , Pune 411062Candidate should be able understand Analog & Digital Electronic circuits & logic, able to troubleshoot PCB faults Working experience in Online-UPS , Inverter , Solar Controller ,Control panel testing , DC DC Converter , Power electronics Product etc ,is more advantage