Electrical Design Engineer Job Vacancies in Maharashtra

Design and develop MV & LV control panels, PCC, MCC, APFC, and PLC panels.Prepare electrical schematics, GA drawings, and wiring diagrams.Selection and sizing of electrical components such as circuit breakers, contactors, relays, busbars, and cables.Ensure designs comply with IS, IEC, and client specifications.Coordinate with production, quality, and project teams for smooth execution.Prepare BOM (Bill of Materials) and technical documentation.Support in testing, commissioning, and troubleshooting of panels.Assist in client interactions for technical discussions and approvals.Optimize designs for cost-effectiveness and efficiency.Required Skills & Qualifications:Bachelor

A Panel Engineer specializes in the design, development, testing, and maintenance of electrical control panels, such as LT/HT panels, PLC panels, and SCADA systems. They create wiring diagrams, ensure safety standards (IEC, NEC), and troubleshoot industrial automation equipment. Typical requirements include AutoCAD, E-Plan, and PLC system knowledge.

Designation :-Junior Electrical EngineerQualification:- Diploma Or BE/B.Tech In Electrical Engineering Experience :- 3 Years To 5 Years Salary:- As Per Interview Gender:- MaleJob Responsibilities:-1. Maintenance Support:-Assist in day-to-day electrical maintenance and inspections of machines and utilities.Support electricians during planned maintenance and shutdown activities.2. Breakdown Assistance:-Support senior engineers in diagnosing and rectifying electrical breakdowns.Ensure proper restoration and testing after breakdown resolution.3. Preventive Maintenance Planning & Execution:-Assist in execution of preventive maintenance schedules.Help in preparation and updating of PM checklists and records.4. Troubleshooting & Learning:-Assist in troubleshooting of motors, drives, panels, sensors, PLC I/O, and field instruments.Learn fault-finding techniques and standard troubleshooting methods.5. Documentation & Reporting:-Maintain maintenance logs, breakdown reports, and spare usage records.Assist in preparation of reports related to downtime, MTTR, and MTBF.6. Safety & Compliance:-Ensure compliance with electrical safety norms, LOTO procedures, and PPE usage.Support audits related to ISO, safety, and statutory compliance.7. Spare & Asset Support:-Assist in monitoring electrical spares and updating asset-related information.Coordinate with stores for spare availability under guidance.8. Continuous Improvement & Projects:-Participate in improvement projects, energy-saving initiatives, and Kaizen activities.Support installation, commissioning, and modification of electrical systems.Job Location:- Palghar, Maharashtra Industry:- Reputed Manufacturing Industry

Male Candidate required, work location kalher BhiwandiKey Responsibilities:Design electrical control panels as per project requirements and standardsPrepare electrical schematics, wiring diagrams, GA drawings, and BOMCoordinate with the control panel manufacturing team for execution and clarificationsElectrical components such PCC up to 6300 A Tier I, Tier II, Back to back, Motor Control Centers (MCCs - Form 2, Form 3 & 4 ), Automatic Power Factor Correction Pane, ATS Starters, PLC Panel, Power Distribution Boards, AMF Panel, Synchronizing Panel, Process Control PanelsEnsure compliance with IEC / IS standards and safety regulationsReview and approve panel layouts and wiring during manufacturingProvide technical support to production, testing, and commissioning teamsHandle design modifications and as-built documentationEnsure quality, cost optimization, and timely delivery of panelsRequired Skills & Qualifications:Diploma / BE / B.Tech in Electrical EngineeringMinimum 36 years experience in electrical design for control panel manufacturingProficiency in AutoCAD / EPLAN (or similar electrical design software)Strong knowledge of LT panels, MCC panels, PCC panels, APFC panels, and PLC panelsUnderstanding of industrial control systems and automationGood coordination, communication, and problem-solving skillsPreferred Skills:Knowledge of PLC programming and VFD configuration (added advantage)Experience in factory acceptance testing (FAT) and site support

Job Opening: Diploma Electrical EngineerCompany: [Bharat Petroleum Corporation Limited]Location: [Raigad / Uran]Position: Diploma Holder Electrical EngineeringEmployment Type: Full-timeJob Responsibilities:Electrical maintenance, troubleshooting, and repairsMonitoring and handling electrical panels, wiring & safety systemsSupport in installation, testing, and commissioning of equipmentDocumentation, reporting, and coordination with the technical teamEligibility:Diploma in Electrical Engineering (DEEE) Fresher or ExperiencedBasic knowledge of electrical systems, safety procedures & field operationsWillingness to learn and work in a technical environmentWhat We Offer:Competitive salaryGrowth opportunitiesSupportive work environmentTraining and career development

Job Description; Elect DesignResponsible for study of RFQ/tender documents/Business enquiry from technical perspectiveDesigning of Electrical control cabinet, Junction box, pendants , sub-assemblies, parts designing as per RFQ or PO specificationsElectrical Control Panel Designing of AC Drive, PLC, Control Logic of Drive, Panels as per specifications received from the Customer. Prepare control scheme/topologyELECTRICAL AUTOCAD , SWITCHGEAR SELECTION, PREPARATION OF BILL OF MATERIAL, DESIGNING PANELS,POWER CIRCUIT DIAGRAM, SLD, IO DRAWINGS CABLE SCHEDULE,, MISUBISHI PLC KNOWLEDGESwitchgear Selection, Drive selection, Control Logic, PLC requirement, IO Counts, special modules, sensors, actuators, displays, IT infrastructure in the project/application etc.Working on P&ID, System Architecture, Networking solutions, Loop diagram, Grounding diagram, Single line diagram, AC/DC power distribution drawings, Earthing drawings, Label drawings, Installation layout, SAT,FAT & Bill of material.Responsible for providing expert advice on Estimation, costing , Design, Quality Assurance documentation.Propose appropriate technical solutionValidation of technical design & estimate thereof- Post sales functionPrepare BOM as per design document Prepare Engineering release document & track for incremental modifications/corrections etc.Create Design master for archive(future reference)Attend DAP meetings with customer

As an Electrical Design & Estimation Engineer, your responsibilities will include:- Developing electrical systems design concepts and solutions for projects- Creating detailed design drawings and specifications- Estimating project costs for labor, materials, and equipment- Working closely with clients, contractors, and vendors to ensure project requirements are met- Conducting site visits and surveys to assess project needs and constraints- Ensuring all electrical systems meet industry standards and regulations- Providing technical support during construction and commissioning phases

Should be Proficient in AutoCAD, Google Sketchup, MS Office2. Should be well versed with Solar Design Software HelioScope. Should be ableto do Shadow Analysis using Helioscope and PVsyst.3. Energy Estimation and Generation Simulation using PVSyst.4. Should be able to do AC/DC loss calculation and selection of cable, faultcalculation of system, Earthing design calculation, Protection schemes, etc.5. BoM Preparation and BoQ preparation of Entire Solar PV Plant based onDetailed Site Survey inputs.6. Design of ACDBs / LT Panels / HT Panels by selecting different switchgear,SPD, meters, and other components.7. Should be able to interpret complex electrical wiring diagrams for LT and HTside, protection schemes, etc.8. Knowledge of different types of module mounting structures9. Should be able to interpret civil / architectural drawings, elevation drawings,cross-section drawings. Knowledge of STAAD Pro and Structural DesignCalculations according to Wind Speed will be an added advantage.

Require exposure of industrial needs in Sectors such as oil & gas, data centres, infrastructure projects and automation solutions. Also required familiarity with automation systems like PLC, SCADA, HMI etc. Strong verbal and written communication skills will be preferred for preparing design reports, proposal statements etc by interacting with various stakeholders & work collaboratively in a team environment and liaise effectively with clients, vendors, and internal team members. Minimum Industry Experience 4 Years or more, hands-on,Specific Work Skill needed, although not limited to,1. Understanding technical tender documents for engineering, P&ID, SLD, etc2. Preparation of TDS as per tender documents.3. Preparation of drawing electrical SLD, GA, Wiring, tray layout etc.4. Load calculation, cable schedule, voltage drop calculations.5. PLC Understanding for engineering like IO list, and panel sizing, architecture foe PLC.

Designation: Electrical Design Engineer Education: BE Electrical Engineering Experience: 5-8 years of relevant experience Location: Andheri (5 minutes walkable from WEH Metro Station) Industry: Real EstateResponsibilities Work on Electrical designs, prepare specifications Analyse equipment requirement and select the same Prepare layouts, single line diagrams, block schematic & logic diagrams and detailing of electrical Monitor work progress at site Coordinate and communicate with Internal & External Consultants & Clients Complete the project(s) within the stipulated time frame with cost effectiveness Provide inputs on sales proposal (whenever required) Working knowledge on Indian standards / codes and statutory requirements for electrical workPre-requisites Should have worked on projects of at least 50 acres. Should have worked on industrial, residential, hospitality and mixed-use projects and have knowledge of space planning. Should have knowledge of:o HT / LT infra Planningo Electrical load calculation and Voltage drop calculationo Cable Trench and RCC pipe sizingo Fire Alarm & PA Systemo ELV infra PlanningAbout Company:Magus Infratech Pvt. Ltd. (Magus) is a private limited company led by Mr. Mayur Suchak, he has been at the forefront of developing innovative and transformative projects for over two decades and the group has played a pivotal role in the development of many ground-breaking projects. The current flagship project in Kalyan is Asmeeta Texpa.At Magus, we foster a culture of nurturing talent and endorse perseverance. Our greatest strength lies in our people, and every initiative is driven by deep insights, innovative ideas, a dynamic approach and precise execution. Our expertise is a result of extensive industry experience and the continuous growth of our team through insightful research and relentless learning.

Responsibilities and Duties: - As per Customer Requirement create Electrical Drawing and G.A. Drawing. Hands On Experience in EPLAN Design Software for Control Panel. Hands On Experience in Coral Draw Design Software for Control Panel. Create and Understand of Macro, symbols, Template, Forms in Eplan. Ferruling Syntax/ Template Generation. Able to Perform Design Calculation cable sizing, PLC I/P and O/P Wiring Etc. Coordinate with other departments for timely completion of project Discuss with seniors and Approve the Drawing as Per Customer Requirements. Generate G.A Drawing and discusses Seniors. Study and Understand Project Concept for Execution Purpose.Qualifications Education level: - Diploma or BE (Electronics & tele-Communication or Electrical or Instrumentation) + Eplan Certification Required. Technical skills: - Knowledge about Electrical EPLAN, Component Selection, Cable size Selection Etc. Personal characteristics: - Communication skills, leadership, Teamwork, problem solving and creative thinking

Traveling to clients' locations.Meeting with clients to discuss their mechanical or electrical automation needs.Drawing electrical or mechanical schematics to demonstrate how processes will work.Developing and installing machine programs using automation software and custom coding languages.Determining machine automation test criteria before the final installation.Testing automated systems for efficiency, safety, and reliability.Troubleshooting system errors.Overseeing the successful installation of PLC programs.Documenting development processes.Providing clients with technical support

Company HVAC manufacturing company is looking for an electrical and controls resource to design and draft control and wiring diagrams.Job Overview Design control system diagrams for HVAC units. Chillers (cooling, heating and four pipe chillers) Direct expansion close control units (cooling only and full function) Design control system boards. Must have a sound knowledge on Carel and similar controllers. Must be electrically competent to design and implement new HVAC unit wiring diagrams. Be able to do fault finding on existing control and electrical wiring systems. Be able to update existing wiring and control diagrams Must be computer literate. Must be AutoCAD electrical literate.Qualification National Diploma or B-Tech electrical Engineering. Minimum three years experience in the relevant discipline.cONTACT MINAL

1. Assist in the development of design approaches and concepts on assigned2. Assist in the data collection and/or field verification3. IEC , BIS, PWD and NBC Building Code for Electrical4. Assist in the selection of equipment to fit the project design5. Guide the team for Substation design 132 KV to 11 KV based on applicable codes and standards6. Electrical system detail design engineering e.g., LT Panels, Earthing, Lighting, Cable Schedule7. Guide the team to do the design for BMS, Security System, AV , Light & Sound etc8. Produce project based technical specifications, BOQ & estimate and tender if applicable9. Ensure that all drawings are prepared with accuracy, neatness with all services coordination to ensure zero hindrances and prior to project deadline10. Communicate with team members, team leader, other disciplines, and outside vendors to obtain necessary information for drawings11. Assist with onsite observations during construction and coordinate design requirements with contractors and equipment suppliers under the direction of project engineer12. Review shop drawings, records changes, and inform all disciplines of details and schedule13. Contractor Bill Certification & Cost management

Job Overview -:-Tthis role requires to Lead the project, Preparing, scheduling, coordinating and monitoring the assigned engineering projects. Monitoring compliance to applicable codes, practices, QA/QC policies, performance standards and specifications. Interacting daily with the clients to interpret their needs and requirements and representing them in the field.Responsibilities -:-Preparing, scheduling, coordinating, and monitoring of assigned engineering projects.Reviewing the engineering tasks and initiating the necessary corrective actions.To ensure that the full compliance of sub-contractors with Company Quality policies and with the requirements of this method statement.To ensure that all the equipment required executing the works according to the BMS project are available, in good condition, and provide any additional equipment that might be required.To co-ordinate with the Electrical, QA, QC & EHS for a safe and proper execution of the works.Liaise with Client / Consultant for execution of works as per BMS project activities Collect and analyse project information to create status reports and recommend future actionsAllocation of required labour through co-ordination with the Project Manager.Take precautionary measures concerning protecting works from hot weather, wind, rain and sun. Ensure that all works activities will be carried out in accordance to approved drawings, specifications and quality.

Job Description :* Carrying out detailed study of customer's house using site survey images and other input documents provided by client.* Design of array layout on AutoCAD for roof mount and ground mount solar installation.* Selection of appropriate solar panels, inverter and battery as per customer requirement.* Determining appropriate interconnection method of Solar PV system to customer's existing electrical service panel and representing it in electrical line diagram.* Selection of appropriate racking structure depending on roof type and ground mount installation.* Sizing of conductors, disconnects and conduit as per the applicable electric code.* Creating equipment specification sheets for every installation.* Following checklist to ensure design precision and quality.* Generating bill of materials according to project requirements.SKILLS REQUIREMENTS :* Strong 2D AutoCAD skills, knowledge of layer management, XREFs manipulation, etc.* Sound Knowledge of CAD 2D design and drafting techniques drawing, graphics arts, reading of drawings.* Basic Solar & Electrical Knowledge.* Basic understanding of drafting principles.* Strong Math skills.* Professional and efficient English verbal and written communication skills.* High attention to details and effective organization.* Skill in reading, interpreting, and using related documents and drawings prepared by others.

1. Scope of work-Design Requirements2. Preparation of DBR (Design Basis Report).3. Load Calculation and assessment of actual demand, maximum demand, rating of transformer, DG, UPS & Inverter as per requirement4. Discussion with Architect for the Planning of Electrical room, HT Metering room, Substation & shafts etc.5. Design & Detailing single line diagram of HT Panel, LT Panels & Distribution Boards6. Earthing System calculations based on soil resistivity report & preparing earthing & lightning arrester layouts As per NBC & IEC7. Design of various Layouts such as Cable tray, Bus duct, Power distribution, Lighting, Earthing8. Design of LV System & Delivering the Customize solution for lighting, Fir Alarm, CCTV, Access control, PA system, Power, Raceway Layouts.9. Design of lighting scheme using Dialux software with detail lighting layouts10. Preparing detail BOQ (Bill of Quantity) & Estimate11. Preparing Specification for Various equipments like HT & LT Panel , Transformer, Dg Set, UPS, LT & HT Installation Works12. Floating Tender & Techno commercial Evaluations of received offer from vendors. 13. Inspections of Various Equipments like:-Transformer, HT Panel, LT Panel, DG Set14. Co-ordination & integration with other services like Architecture, HVAC,firefighting, interior etc along with Client & Contractors.15. Shop drawing approvals submitted by contractor16. Support during Execution of project & at the time of Commissioning to Client & Contractors.17.ELV Design & Specifications.

We are seeking a skilled and dynamic MEP (Mechanical, Electrical, Plumbing,) Engineer to join our team. This role is ideal for a professional who is experienced in MEP design, project management, and has a strong network within the construction and building industry. The MEP Engineer will be responsible for securing and managing MEP projects, with compensation tied directly to the value of the projects secured.Key Responsibilities:Project Acquisition: Identify and pursue potential MEP projects through industry connections, networking, and market research. Actively engage with architects, developers, contractors, and other stakeholders to secure new business.Design and Consultation: Provide expert MEP design and consultancy services for residential, commercial, and industrial projects. Ensure that designs meet client requirements, industry standards, and local regulations.Project Management: Oversee the execution of MEP projects from concept to completion. Coordinate with other engineers, contractors, and consultants to ensure timely and within-budget delivery of projects.Technical Expertise: Stay updated on the latest advancements in MEP technology, best practices, and regulatory requirements. Apply this knowledge to enhance project outcomes and client satisfaction.Reporting: Maintain detailed records of all projects, including client interactions, project progress, and financial performance. Provide regular reports to the management team on business development activities and project status.Qualifications:Bachelor's degree in Mechanical, Electrical, or Plumbing Engineering or a related field.Proven experience in MEP design, engineering, or project management.Strong network within the construction, real estate, or building industry.Excellent communication, negotiation, and client management skills.Ability to work independently and manage multiple projects simultaneously.Proficiency in MEP design software (AutoCAD, Revit, etc.) and other relevant tools.

Company is engaged manufacturing Power Transmission and distribution sector, fabrication division for manual and Auto machines - products are for Electrification, const , Power Transmission etc

We are hiring for the post of Electrical Service EngineerExperience in Design, Testing and commissioning of electrical control panels (motor control panels) Ability to understand Single Line Diagrams and Block Diagrams of Electrical Design and electrical wiring diagrams Good knowledge of Basic electrical components, PLC functionality and I/Os, VFDs, switching devices such as VCBs/ACBs/VCs, other protection components and panel meteringShould be ready for touring for commissioning purposesQualification- Diploma / BE ElectricalExperience: 3-5 yearsMust have good communication, planning, and organization skills.Contact Person- Deepak - 7757087059ID- deepak.vijayamgmt@gmail.com

We are hiring for the position Electrical Design EngineerKnowledge Electrical Components.Ability to understand Single Line Diagrams and Block Diagrams of Electrical DesignHands on experience on Electrical Wiring Diagrams using AutoCAD / KiCADAbility to effectively use Microsoft Office.Ability to handle PLC will be an added advantage.Qualification: Degree/Diploma in ElectricalExperience: 2-5 yearsPackage will be as per experience, knowledge and capability.Contact Person- Deepak - 7757087059ID- deepak.vijayamgmt@gmail.com

Require exposure of industrial needs in Sectors such as oil & gas, data centres, infrastructure projects and automation solutions. Also required familiarity with automation systems like PLC, SCADA, HMI etc. Strong verbal and written communication skills will be preferred for preparing design reports, proposal statements etc by interacting with various stakeholders & work collaboratively in a team environment and liaise effectively with clients, vendors, and internal team members. Minimum Industry Experience 4 Years or more, hands-on,Specific Work Skill needed, although not limited to,1. Understanding technical tender documents for engineering, P&ID, SLD, etc2. Preparation of TDS as per tender documents.3. Preparation of drawing electrical SLD, GA, Wiring, tray layout etc.4. Load calculation, cable schedule, voltage drop calculations.5. PLC Understanding for engineering like IO list, and panel sizing, architecture foe PLC.

Designation: Electrical design and Estimation engineerExperience : 3.- 7 YearsQualification: B Tech Electrical, BESalary: 3.5 LPA to 4 LPALocation: Navi MumbaiImmediate joiners preferredTo be able to gather Inputs/Data, Visualize and Analyse it in an effective Manner To review Design Packages, Project Drawings and other deliverables in-order facilitate the estimation process Should generate Techno-Commercial documentation ; present to management / Stake Holders Should be able to understand and prepare SLDs, BOM (preferably both for LT & HT Switchgear Panels, Sub-stations Out door units)Should possess strong Analytical & Strategic Planning skillsHands-on experience over Autodesk (CAD design development)Excellent Written and Verbal Communication SkillsProficient in MS OfficeAbility to multitask and manage time effectivelyAs an Electrical Estimator, you will be responsible for determining the electrical cost for the given project. You will also be responsible for reading and interpreting the blueprints in an effective way. You should be able to coordinate with the Contractor to estimate the cost of each electrical element. In addition to this, you should have extraordinary knowledge of electrical codes and distribution systems. Furthermore, you should possess excellent time management and analytical skills to be successful in this position.ResponsibilitiesDetermining the electrical needs of the project.Drawing the outline and blueprints for the said electrical system.Placing the utility, workstation, and other fixtures as per the specifications.Understanding and interpreting the blueprints.Reviewing the plan to estimate the length of electrical wire.Identifying the cost and time constraints.Knowing the supply cost for each individual element.Determining the labor requirements for completing the project.Working in coordination with Contractors and other team members.Maintaining electrical cost database.Performing calculations of various profile