Electrical Designer Jobs

Key ResponsibilitiesElectrical System Design: Design internal and external electrical layouts, including High Voltage/Low Voltage (HV/LV) power distribution networks, sub-stations, transformer sizing, and DG (Diesel Generator) backup systems.Lighting & ELV Design: Create comprehensive indoor/outdoor lighting layouts, lux level calculations, emergency lighting networks, and Extra-Low Voltage (ELV) systems (including CCTV, fire alarms, PA systems, and data networks).Engineering Calculations: Perform precise technical calculations for cable sizing, voltage drop, short circuit analysis, capacitor bank requirements, and protective earthing/lightning protection networks.Drafting & Schematics: Develop detailed 2D electrical single-line diagrams (SLDs), power schematics, conduit routing layout plans, and panel schedules using AutoCAD.BOQ & Tendering: Prepare comprehensive Bill of Quantities (BOQ), detailed material specifications, cost estimations, and technical data sheets for vendor tendering and procurement.Codes & Compliance: Ensure all electrical engineering designs strictly conform to the National Electrical Code (NEC), National Building Code (NBC), Indian Electricity (IE) Rules, and local state electricity board regulations (e.g., MSEDCL guidelines).Site Coordination: Review shop drawings submitted by electrical contractors on-site, address technical queries (RFIs), and conduct periodic site inspections to ensure installation matches design specifications.

About companyLeading Pvt Ltd Pharmaceutical machine manufacturing company Designation - Design Engineer -ElectricalLocation - Changodar, Ahmedabad (staff bus and Canteen facility available, general time 08 hrs working, Sunday week off)Salary - No bar For Right Candidate + Other benefitsExperience - 1 to 3 yearsGender - MaleEducation - BE / Diploma - Electrical Job Responsibilities- Prepare electrical drawings and support machine wiring for pharmaceutical equipment. - Assist in panel design, component selection, and electrical testing activities.- Work with senior engineers to troubleshoot electrical issues and improve machine performance- Knowledge of PLC ,Scada, HMI, Servo will be added advantagesInterested send updated resume in word format, along with below details,1. Total years. Of Exp -2. Current CTC -3. Exp. CTC -4. Time required to join -Thanks & Regards,HR Department

As a Safety Engineer, you will play a vital role in ensuring a safe working environment. This position requires a strong commitment to safety practices and compliance with regulations. **Key Responsibilities:**- **Risk Assessment:** Analyze potential hazards in the workplace and identify necessary actions to minimize risks, ensuring a safer work environment.- **Safety Standards Compliance:** Ensure all operations meet local, national, and international safety regulations, keeping the organization up-to-date with current laws and standards.- **Safety Training:** Develop and conduct safety training for employees, equipping them with the knowledge and skills to work safely and effectively.- **Accident Investigation:** Investigate accidents and near misses to identify root causes and develop strategies to prevent future occurrences.- **Safety Audits:** Regularly review safety procedures and practices through audits to ensure compliance and recommend improvements when necessary.- **Emergency Response Planning:** Create and implement emergency response plans to prepare for any incidents that could affect employee safety.**Required Skills and Expectations:**Candidates should have a diploma in a relevant field and 2 to 7 years of experience in safety engineering or a related area. Strong knowledge of safety regulations and best practices is essential. Excellent communication and interpersonal skills are required, as you will collaborate with various teams. You should be detail-oriented and possess strong analytical skills to assess risks accurately. The ability to train and influence employees positively regarding safety practices is expected.

Designing, maintaining, implementing, or improving electrical instruments, facilities, components, equipment , or systems for industrial, commercialPerforming a wide range of engineeringVisa charges applicableRequired Candidate profileA minimum of 5 years experience in a similarrole.Experience in using or a desire to learn the required software.Knowledge of applicable codes related to electronic engineering.Proficient in design

As an MEP Site Engineer, your primary role will involve managing and overseeing mechanical, electrical, and plumbing (MEP) works on construction sites to ensure projects are completed efficiently and to the highest standards.**Key Responsibilities:**- **Project Coordination:** Work closely with project managers and other engineers to coordinate MEP activities and ensure alignment with the overall project schedule.- **Site Inspection:** Conduct regular site inspections to verify that MEP installations comply with design specifications and local codes, ensuring safety and quality are maintained.- **Technical Support:** Provide technical assistance and guidance to contractors and subcontractors regarding MEP systems, troubleshooting any issues that may arise during installation.- **Documentation:** Maintain accurate records of MEP work, including progress reports, change orders, and any site modifications, to keep stakeholders informed and uphold project transparency.- **Material Management:** Oversee the procurement and proper usage of MEP materials, ensuring that they meet the required standards and are delivered on time to avoid delays.**Required Skills and Expectations:**Candidates should possess a Bachelors degree in Architecture, Engineering, or an Advanced/Higher Diploma related to MEP systems. A minimum of 1-7 years of relevant experience is expected. Strong analytical and problem-solving skills are essential for diagnosing issues effectively. Good communication skills are required to collaborate effectively with teams and stakeholders. Familiarity with building codes, safety standards, and best practices in the industry is critical. Lastly, proficiency in relevant software tools for designing and managing MEP systems will be advantageous.

We are Hiring Production Engineer for Pharmaceutical Company in Nagpur!!!Job role: Production EngineerEducation: B.E. Mechanical/Chemical/ElectricalExperienced: 2-3 YearsSalary: 25K for 2-3 years experience candidate & 30K for 3-5 years of experienced candidateJob location: Nagpur, MaharashtraSkills requiredDiploma/Degree in mechanical/Chemical/Electrical branchCandidate must have 2-3 years of experience in productionReady to join on immediate basisCandidate must have an experience in production departmentFor more details you can reach us on 7517361633

Electrical Project Engineer Responsibilities:Analyzing technical drawings, interpreting specifications, and determining the electrical requirements of a given project.Liaising with other engineers and clients to ensure overall customer satisfaction.Managing and monitoring all assigned electrical projects.Ensuring health and safety codes are obeyed at all times.Completing quality assurance on all electrical components and projects, and writing up reports.Using CAD software to draft designs.Analyzing and approving various construction and engineering plans.Diagnosing problems and troubleshooting equipment.Ensuring all deadlines and budgetary requirements are met.Keeping abreast of the latest developments in electrical engineering.

Urgent OpeningElectrical AutoCAD DesignerEducation: Diploma in Mechanical EngineeringJob Location: Palghar West, PalgharExperience: 1 to 3 YearsSalary: Rs 20,000/- PM to 25,000/-PMImmediate Joining

Major Roles & Responsibilities:-Assist in designing and developing electrical systemsPrepare and interpret wiring diagrams and schematicsSupport installation, testing, and commissioning of equipmentPerform troubleshooting and fault diagnosisConduct routine inspections and preventive maintenanceEnsure compliance with electrical safety standards and codesMonitor power distribution and system performanceCoordinate with senior engineers and project teamsMaintain technical documentation and reportsAssist in project planning and executionWork with tools like AutoCAD for basic designsSupport site operations and resolve on-site issues

As a Senior Biomedical Engineer, you will play a crucial role in developing and maintaining medical devices and systems. Your expertise will ensure that healthcare technologies are safe, effective, and innovative. **Key Responsibilities:**- **Design and Development:** Create and improve biomedical devices, ensuring they meet regulatory standards and patient needs. This includes working on prototypes and testing equipment for functionality.- **Testing and Validation:** Conduct rigorous testing to validate that devices perform as intended. This involves analyzing data and troubleshooting any issues that arise during testing.- **Collaboration with Healthcare Professionals:** Work closely with doctors, nurses, and other health professionals to understand their needs and incorporate their feedback into product designs, leading to enhanced patient care.- **Technical Support:** Provide ongoing technical support and training for users of biomedical equipment. This includes troubleshooting any operational issues and guiding users on proper usage.- **Regulatory Compliance:** Ensure that all products comply with relevant health and safety regulations. Keep up to date with industry standards to maintain compliance.**Required Skills and Expectations:**Candidates should have a solid background in biomedical engineering with 3 to 9 years of experience. A strong understanding of engineering principles, design software, and medical device regulations is essential. You should possess excellent problem-solving skills and be able to work independently as well as part of a team. Good communication skills are necessary to effectively liaise with various stakeholders. A passion for improving healthcare technology and a commitment to patient safety will set you apart in this role.

We are looking for a skilled Project Engineer to join our team in Indore. The ideal candidate will have 7 to 11 years of experience in engineering and hold a degree in Architecture (B.Arch) or Engineering (B.E). **Key Responsibilities:**- **Project Planning:** Develop and manage project plans, ensuring timelines and milestones are met. This includes coordinating tasks and resources to optimize project flow. - **Design Management:** Collaborate with architects and designers to review and approve project designs, ensuring they meet technical specifications and quality standards.- **Site Supervision:** Oversee construction sites to ensure compliance with plans and safety regulations. Conduct regular site inspections and address any issues that arise promptly.- **Team Coordination:** Work closely with cross-functional teams, including architects, contractors, and clients, to ensure effective communication and collaboration throughout the project lifecycle.- **Budget Management:** Monitor project budgets and expenditures, working to maintain financial controls and keep projects within budget.- **Reporting:** Prepare and present regular progress reports to stakeholders, highlighting successes, challenges, and any necessary adjustments to plans.**Required Skills and Expectations:**Candidates should possess strong project management skills and a solid understanding of engineering principles. They should have excellent communication and interpersonal skills to facilitate teamwork and client interactions. Proficiency in project management software and engineering tools is essential. Ideal candidates are expected to be detail-oriented, adaptable, and capable of problem-solving under pressure, ensuring projects are completed on time and to quality standards. Leadership experience and a proactive attitude are highly valued.

We are looking for an Instrument & Control Engineer who will be responsible for designing, developing, and maintaining equipment used for controlling and monitoring engineering systems. The ideal candidate will have a strong background in instrumentation and control systems, with 1 to 7 years of experience.**Key Responsibilities:**- **Design Control Systems:** Develop and design control systems for various engineering processes to ensure efficiency and compliance with industry standards.- **Install and Calibrate Instruments:** Oversee the installation and calibration of instrumentation equipment, ensuring everything functions correctly according to specifications.- **Troubleshooting:** Identify and resolve issues in control systems and instrumentation to maintain operational efficiency and minimize downtime.- **Documentation and Reporting:** Maintain accurate documentation of control systems, including design changes, procedures, and performance reports, facilitating clear communication within the team.- **Collaboration:** Work closely with engineers and technicians across departments to implement control strategies and improve system performance.**Required Skills and Expectations:**Candidates should possess a diploma in engineering, preferably in Instrumentation or related fields, with a minimum of 1 year of relevant experience. Strong analytical and problem-solving skills are essential, along with the ability to work independently and in a team. Familiarity with instrumentation software and tools is crucial. The candidate should also have excellent communication skills to collaborate effectively with team members and other departments. A proactive attitude towards troubleshooting and a keen willingness to learn new technologies are highly valued.

electrical engineer designs, develops, & maintains systems & equipment. They oversee power distribution, ensure system reliability, & implement safety standards to efficiency, performance, & sustainable infrastructure.Required Candidate profileDesign & maintain electrical systems for various applicationsTroubleshoot electrical issues & ensure operational reliabilityResearch advanced technologies

Key Responsibilities: Plan, execute, and manage interior fitout projects from start to completion. Coordinate with clients, designers, consultants, vendors, and contractors. Prepare and monitor project schedules to ensure timely completion. Manage site teams including supervisors, subcontractors, and labour. Ensure work is executed according to approved drawings and specifications. Monitor material procurement, site resources, and project costs. Conduct regular site inspections and progress meetings. Ensure adherence to safety and quality standards at site. Handle project documentation, reporting, and billing coordination.

Design ,Detailing & drafting of the solar PV plant & pilling Layout .Prepare the BOQ / BOM of the project .Calculation of AC Earthing ,DC Earthing ,Lighting Arr ester ,Auxiliary Transformer sizing ,prepare the auxiliary SLD ,UPS /Battery size calculation ,LT /HT cable selection with cable scheduling . Outdoor and indoor lighting calculation by using Dialux . GTP review of equipment and correction accordingly tender or requirement .Switch yard and inverter yard layout detailing .Coordination with other departments for smoothing the project functioning .Site visit if required min design 100mw ground - mounted solar power plant .Engineer preferred from Solar industry .Qualification Should be B.Tech ( Electrical ) .

Install, maintain and repair electrical control, wiring, and lighting systems.Read technical diagrams and blueprints.Perform general electrical maintenance.Inspect transformers and circuit breakers and other electrical components.Troubleshoot electrical issues using appropriate of testing devices.Repair and replace equipment, electrical wiring, or fixtures.Follow National Electrical Code state and local building regulations.Circuit breaker corrective maintenance.Good knowledge of heating and air conditioning systems.Good knowledge of various test equipment.

Execute plans of electrical wiring for well functioning lighting, intercom and other electrical systemsInstall electrical apparatus, fixtures and equipment for alarm and other systemsInstall safety and distribution components (e.g. switches, resistors, circuit-breaker panels etc.)Connect wiring in electrical circuits and networks ensuring compatibility of componentsPrepare and assemble conduits and connect wiring through themPrevent breakdown of systems by routinely inspecting and replacing old wiring and insulated cables, cleaning circuits etc.Perform effective troubleshooting to identify hazards or malfunctions and repair or substitute damaged units

Designing, maintaining, implementing, or improving electrical instruments, facilities, components, equipment products, or systems for industrial, commercial, or domestic purposes.Performing a wide range of engineering tasks by operating computer-assisted design or engineering software and equipment.Conferring with customers, engineers, and others to discuss existing or potential engineering products or projects.Ensuring that installation and operations conform to standards and customer requirements by preparing electrical systems specifications, technical drawings, or topographical maps.Establishing construction, manufacturing, or installation standards or specifications by performing a wide range of detailed calculations.Ensuring compliance with specifications, codes, or customer requirements by directing or coordinating installation, manufacturing, construction, maintenance, documentation, support, or testing activities.

Major Roles & ResponsibilitiesDesign & DevelopmentDesign electrical systems, circuits, and components for various applicationsDevelop schematics and layout diagrams using tools like Auto CAD Electrical or EPLANSelect appropriate electrical materials and componentsInstallation & CommissioningOversee the installation of electrical systems and ensure proper functioningSupervise commissioning processes and conduct performance testsCoordinate with contractors and other engineering teams during implementationMaintenance & TroubleshootingInspect and maintain electrical equipment and systemsDiagnose faults and implement corrective actionsDevelop preventive maintenance schedulesProject ManagementPlan and execute electrical engineering projectsPrepare budgets, estimates, and project timelinesEnsure completion within cost, time, and quality targetsCompliance & SafetyEnsure systems comply with electrical codes and safety standards (e.g., IEC, NEC)Implement electrical safety protocols and risk assessmentsMaintain documentation for audits and inspectionsTesting & Quality AssurancePerform system tests and inspections using appropriate toolsVerify system integrity and performance before handoverEnsure quality control of electrical installations and productsControl Systems & AutomationDesign and implement control systems (e.g., SCADA, PLC)Integrate sensors, drives, and programmable devicesOptimize system performance for efficiency and automationDocumentation & ReportingMaintain technical documentation including drawings, test reports, and manualsPrepare regular progress and performance reportsUpdate records for maintenance and modificationsCollaboration & CommunicationWork with multidisciplinary teams (mechanical, civil, instrumentation)Communicate with vendors, clients, and contractorsProvide technical support and training to staff and stakeholdersInnovation & R&DResearch new technologies and energy-efficient solutionsContribute to product development and innovation projectsStay updated with industry trends and technological advancements

Designing and implementing work schedules for the electrical staff.Providing motivation and assistance when necessary.Inspecting and assessing the work done by the electrical staff.Reading and interpreting design schematics to ensure the proper installation of electrical systems.Troubleshooting major system failures and equipment malfunctions.Repairing and maintaining electrical equipment.Overseeing the purchasing and maintenance of the electrical equipment on-site.Ensuring the work is completed on schedule and to code.Maintaining a safe and clean work area.Consulting with builders, architects, and other workers on-site.Electrical Supervisor Requirements:Bachelors degree in electrical engineering or a similar field.Proven work experience as an electrical supervisor.Strong leadership and managerial skills.In-depth knowledge of commercial and industrial electrical systems.Excellent communication skills.Familiarity with state electrical and safety codes.Advanced troubleshooting skills.Basic computer skills.A good eye for detail

Major Roles & ResponsibilitiesDesign & DevelopmentDesign electrical systems, circuits, and components for various applicationsDevelop schematics and layout diagrams using tools like Auto CAD Electrical or EPLANSelect appropriate electrical materials and componentsInstallation & CommissioningOversee the installation of electrical systems and ensure proper functioningSupervise commissioning processes and conduct performance testsCoordinate with contractors and other engineering teams during implementationMaintenance & TroubleshootingInspect and maintain electrical equipment and systemsDiagnose faults and implement corrective actionsDevelop preventive maintenance schedulesProject ManagementPlan and execute electrical engineering projectsPrepare budgets, estimates, and project timelinesEnsure completion within cost, time, and quality targetsCompliance & SafetyEnsure systems comply with electrical codes and safety standards (e.g., IEC, NEC)Implement electrical safety protocols and risk assessmentsMaintain documentation for audits and inspectionsTesting & Quality AssurancePerform system tests and inspections using appropriate toolsVerify system integrity and performance before handoverEnsure quality control of electrical installations and productsControl Systems & AutomationDesign and implement control systems (e.g., SCADA, PLC)Integrate sensors, drives, and programmable devicesOptimize system performance for efficiency and automationDocumentation & ReportingMaintain technical documentation including drawings, test reports, and manualsPrepare regular progress and performance reportsUpdate records for maintenance and modificationsCollaboration & CommunicationWork with multidisciplinary teams (mechanical, civil, instrumentation)Communicate with vendors, clients, and contractorsProvide technical support and training to staff and stakeholdersInnovation & R&DResearch new technologies and energy-efficient solutionsContribute to product development and innovation projectsStay updated with industry trends and technological advancements

Required Electrical engineer in AbroadDesigning, maintaining, implementing, or improving electrical instruments, facilities, components, equipment products, or systems for industrial, commercial, or domestic purposes.Performing a wide range of engineering tasks by operating computer-assisted design or engineering software and equipment.Conferring with customers, engineers, and others to discuss existing or potential engineering products or projects.Ensuring that installation and operations conform to standards and customer requirements by preparing electrical systems specifications, technical drawings, or topographical maps.

Design, install & maintain electrical systemsWork on industrial, power or building systemsRead drawings & ensure safety/compliance standardsProcess time 6 months Good salary packageRole: Electrical / Electronics Engineer