Electrical Designer Job Vacancies in Bangalore

Job Description: (Pre-order work)Making concept ArchitectureMaking BOMMaking EstimationKnowledge on below area required:Automation systemsElectrical circuit drawingsCapability to understand process of the requirementsUnderstand the language of PLCPl inbox CV at richa@gtalentpool.com

Job description:Job Description - Electrical Draftsman / Electrical DrafterCompany: Ematrix Consulting Engineers Pvt. Ltd.Department: Electrical DesignLocation: BengaluruPositions: 2Position 1 - Junior Electrical DrafterGender: FemaleExperience: 1 yearQualification: Diploma / BE / B.Tech in Electrical Engineering or related fieldPosition 2 - Senior Electrical DrafterGender: MaleExperience: 10 yearsQualification: Diploma / BE / B.Tech in Electrical Engineering or related fieldJob SummaryWe are looking for skilled Electrical Draftsmen/Drafters to join our Electrical Design team. The candidates will be responsible for preparing accurate electrical drawings, layouts, schematics, and design documentation based on project requirements and engineering inputs.The Senior Electrical Drafter will be responsible for handling projects independently, reviewing drawings, coordinating with engineers and other disciplines, and guiding junior drafting team members.Key ResponsibilitiesElectrical Drafting & DesignPrepare detailed electrical drawings and layouts using AutoCAD and other relevant drafting software.Prepare electrical power distribution layouts, lighting layouts, and electrical services drawings.Prepare Single Line Diagrams (SLD) and schematic drawings.Prepare cable routing, cable tray, containment, and electrical equipment layouts.Prepare electrical room layouts and equipment arrangement drawings.Prepare load schedules and other electrical design documentation based on engineering inputs.Develop drawings as per project specifications, applicable standards, and client requirements.Make revisions to drawings based on engineer/client comments.CoordinationCoordinate with Electrical Engineers, HVAC, Plumbing, Fire Fighting, ELV, and Architectural teams.Ensure electrical drawings are properly coordinated with other MEP services.Identify clashes and discrepancies in drawings and communicate them to the concerned engineer.Attend design coordination meetings whenever required.Drawing Quality & DocumentationEnsure drawings are accurate, clear, properly dimensioned, and presented according to company standards.Maintain proper drawing numbering, revision control, and documentation.Review drawings before submission to ensure errors and omissions are minimized.Prepare drawings for client review and approval.Incorporate comments received from clients and consultants.Additional Responsibilities - Senior Electrical DrafterIndependently handle electrical drafting requirements for projects.Review and check drawings prepared by junior team members.Guide and train junior Electrical Draftsmen.Coordinate directly with engineers and project teams regarding drawing requirements.Ensure drawings are completed within project timelines.Assist the design team in resolving drafting and coordination issues.Maintain consistency and quality across all project drawings.Required SkillsStrong knowledge of AutoCAD and electrical drafting.Good understanding of electrical layouts and MEP services.Knowledge of electrical symbols, standards, and drawing conventions.Ability to understand engineering drawings and design inputs.Good knowledge of MS Office and Excel.Ability to work with multiple projects and meet deadlines.Good communication and coordination skills.Strong attention to detail and accuracy.Preferred Skills - Senior PositionMinimum 10 years of experience in electrical drafting/design.Strong experience in building services/MEP projects.Experience handling large-scale commercial, industrial, residential, or hospitality projects.Ability to independently prepare and review complete electrical drawing packages.Experience coordinating with multiple MEP disciplines.Knowledge of Revit MEP/BIM will be an added advantage.Candidate ProfileJunior Electrical Drafter - 1 Year ExperienceMinimum 1 year of relevant electrical drafting experience.Should have good knowledge of AutoCAD.Should be willing to learn and work closely with the Electrical Design team.Good attention to detail and willingness to take responsibility for assigned drawings.Senior Electrical Drafter - 10 Years ExperienceMinimum 10 years of relevant electrical drafting experience.Should be capable of independently handling electrical drafting requirements.Should have strong knowledge of electrical building services and MEP coordination.Should be capable of reviewing drawings and guiding junior team members.Should have good communication and project coordination skills.Key Performance Indicators (KPIs)Accuracy and quality of electrical drawings.Timely completion of drawings.Number of drawing errors/revisions.Effective coordination with other MEP disciplines.Compliance with project/client requirements.Proper drawing documentation and revision control.Ability to meet project deadlines.Note: Candidates should be comfortable working in a professional MEP consultancy environment and handling multiple project requirements as per deadlines.

Job Summary:-We are seeking enthusiastic and motivated Graduate Engineer Trainees (GETs) to join our Engineering and Manufacturing team. The selected candidates will undergo structured training and gain hands-on experience in production, maintenance, quality, project execution, and engineering operations. This role provides an excellent opportunity for fresh engineering graduates to build a strong technical foundation and develop professional skills.Key Responsibilities:-Assist in day-to-day engineering and manufacturing activities.Support production, maintenance, quality assurance, and project teams.Monitor equipment performance and identify improvement opportunities.Participate in preventive and corrective maintenance activities.Prepare technical reports, documentation, and work instructions.Follow safety standards, company policies, and operational procedures.Analyze engineering data and assist in problem-solving activities.Coordinate with cross-functional teams to ensure smooth operations.Learn and implement continuous improvement methodologies.Eligibility Criteria:-Bachelor's Degree in Mechanical Engineering, Electrical Engineering, or related discipline.Freshers or candidates with up to 1 year of experience.Good analytical and problem-solving skills.Basic knowledge of engineering principles and industrial processes.Strong communication and teamwork skills.Willingness to work in shifts and relocate if required.Preferred Skills:-AutoCAD, CATIA, MS Office, and basic engineering software knowledge.Understanding of manufacturing processes and maintenance concepts.Knowledge of safety standards and quality systems.

We are seeking a highly skilled and experienced Electrical Engineer or Electrical Project Manager to oversee electrical installation and commissioning works across our project locations. The ideal candidate will have a strong background in handling electrical systems for construction or industrial projects, with proven experience in MEP-focused roles. The position requires hands-on supervision, technical knowledge, and the ability to coordinate across various teams to ensure timely and quality project execution. The candidate must possess strong team leadership capabilities to manage and guide site engineers, technicians, and support staff throughout project lifecycles.Key Responsibilities:Lead and manage a team of engineers, supervisors, and site staff to effectively execute all electrical works on site.Ensure the team performs assigned responsibilities with a focus on quality, safety, and timely delivery.Supervise the installation, testing, and commissioning of key power infrastructure including transformers, HT/LT panels, DG sets, and substation components.Conduct erection of double-pole structures and transformer substations in accordance with site requirements.Oversee underground and overhead cable laying activities in alignment with approved project drawings while accommodating site-specific conditions.Manage reconductoring and replacement of HT/LT lines, installation of new double pole structures, and erection of spun poles.Inspect and supervise all cable termination and identification work to ensure quality and accuracy across internal and external wiring systems.Ensure effective communication and collaboration between engineering teams, site staff, and management to maintain smooth workflow and resolve issues promptly.Qualifications and Experience:Bachelors Degree in Electrical Engineering or a related field.Minimum of 10 years of relevant experience in electrical installation, testing, andcommissioning within construction or industrial environments.M.Tech in Electrical Engineering is preferable but not mandatory.Proven ability to lead and manage teams in a project execution environment.Strong knowledge of MEP systems, site execution practices, and electrical safety standards.Demonstrated leadership, attention to detail, and ability to manage multiple tasks while working closely with cross-functional teams.

Job Description: Calculation of Power demand as per industrial bench marking Preparation of Single line Diagrams (SLD) Preparation of Substation General arrangement drawing equipment layout for Substations both AIS and GIS Transformer sizing, cable sizing, breaker sizing, capacitor bank sizing for MV and LV system LV and MV cable routing Lightning protection and earthing design for substations and buildings. Lighting calculation, small power design, cable racking, installation details for the Electrical services. Cable racking design. AC/DC schematic preparation for substation. Clash detection and co-ordination with other Utilities Experience in preparation of Basis of design, design report for the projects. Detailed knowledge of power equipment such as switchgear, protective relays, breakers,transformers, motors, and generators is requiredResponsibilitiesStrong conceptualization ability, strong interpersonal communication and organizational skills are a must,including the capability to explain complex technical issues to decision-makers and project teams. Candidatemust have good oral and written communication skills, be willing to travel abroad for short and long term, andwork successfully in a customer focused, project-oriented environment.Mandatory Requirements: - Bachelors degree in electrical engineering with 1-3 years of relevant industrial experience Sound knowledge on software like Lighting Reality, Dialux / Relux, CAD software Good knowledge on BS standards and International standards. As per health and safety and environmental requirement carry out the design

1-2 year experience in Electrical and Control panel manufacturing field, knowledge of electrical and electronics parts and Cables like FRLS-ZH etc

wanted MARKETING ENGINEER for MEP / DG Set /UPS / Electrical Switchgear / Lighting Products for BangaloreTotal Posts : 1 No - Gender : Male OnlyEducation : ITI/Diploma/BE - Mechanical Back ground Work Exp : 2 - 3+ Yrs. Salary : Rs.25K 30K Based on Experience Note : Should have 2 Wheeler with Valid LicenseWork Place : BANGALORE. Job Description : Should have relevant experience from MEP / DG Set /UPS / Electrical Switchgear / Lighting / Automation / Switchgear sectors etc., Should have good geographical knowledge of Bangalore should be willing to travel meet Clients, Electrical Consultants and Architects, clients.Skills : Must have good knowledge of MS Office (word, excel, ppt) very good spoken and written communication and must be social-media savvy he must be able to create posts for LinkedIn, Facebook, Marketing campaign, Etc.,

Proficient in concept design and development of electrical and electro-mechanicalsystems/subsystems and power distribution by following PDR process generatedEngineering Requirement Specification, conducted Design Reviews, performedFMEA, validated designs through Prototyping and Testing and released EngineeringDocumentationDemonstrated strong Problem Solving and Decision-Making ability by applyingstructured process or tools such as 8Ds, Fishbone, 5 Whys, Pugh matrix, Pareto chart,etc.Demonstrated design experience of Electrical/Electronic circuits with interface,operation, and control of peripheral devices (RTDs, thermocouples, electric actuators,stepper motors, heaters, pressure sensors)Experience in driving and managing projects in collaboration with CFT (Mechanical,Software, Manufacturing, Supply chain and Product safety) for project deliverablesPrepare and analyze test plans and procedures and possess hands on experiencewith various test and measuring equipment like multimeters, function generators,oscilloscopes, analyzers

Engineer- (design): MUST HAVE 2-3 years experience in making AUTOCADDrawings, is capable to interpret electrical circuits into drawingsRequired: Engineering degree / Diploma in electrical /Electronics

Develops electrical components by studying Customer requirements; Confirms system and component / product capabilities by designing feasibility and testing methods; testing properties; Testing finished- product and system capabilities; Create ECN for any drawing alteration; Create new parts in ERP; Prepare electrical drawings for the parts; Upload in ERP after part approval from MD; Update the following in ERP GA drawing, Bill of Material, Resistor details, Schematic representation, label details, NPD - create necessary part drawings for new prototype Prepares component / product reports by collecting, analysing, and summarizing information and trends; Completes projects by training and guiding production; Contributes to team effort by accomplishing related results as needed; Coordinates with Engineering Team, Sales & Marketing, Quality, Stores & Production; Maintain records/reports as per ISO requirements; Work non-traditional hours on weekends and holidays during exigencies; Any other task assigned by management;

We are hiring a Fresher Electrical Engineer for our ongoing Electrical ProjectsJob Location:- Noida, Mumbai, Pune Hyderabad Bangalore.He should know well drafting and should be proficient in Excel software and Letter Drafting.He should have good knowledge of procurement items included in BOQ.He should have the ability to complete the work quickly.He should be hardworking and have the ability to work.He should have confidence in himself to complete the work timely.Candidate must be an Electrical Engineer, those doing engineering from any other discipline please do not apply.

We are looking for an HVAC candidate (ITI/Diploma) having 3-4 years of experience in HVAC services Engineering and drafting for immediate appointment in our MEP consultancy services organization in Bangalore. Interested candidates can email their CVs.

We are Looking for Electrical Design Engineer. Having Experience in Real Estate High Rise Residential & Commercial Project Electrical Designs

we are urgently looking for Electrical Site Engineer. Design of Electrical Panels-MCC/PCC/DG Synch/VFD/PLC

We are looking for 6 Electrical Design Engineer Posts in Bangalore, with deep knowledge in AutoCAD, auto cad & ms office and Required Educational Qualification is : Diploma,B.Tech/B.E

Job code: Design Draughtsman-Electrical & ElectronicsDesign Draughtsman-Electrical & Electronics To create detailed electrical schematics, and channel lists for the electrical control systems used in our high-precision scientific instruments. Job Description-Design and develop control panels & electrical schematics as per requirements. Ability to create reports from the electrical schematics.Prepare and update the BOM as per design specifications.Cost estimation of electrical and electronics items and executing projects within the budget.Working closely with the assembly team to ensure that customer requirements are met and all requirements are implemented. Communicate with suppliers to confirm information on products necessary to complete electrical schematics and layouts.Perform any other responsibilities assigned by the management from time to time.

Job Summary:-We are seeking enthusiastic and motivated Graduate Engineer Trainees (GETs) to join our Engineering and Manufacturing team. The selected candidates will undergo structured training and gain hands-on experience in production, maintenance, quality, project execution, and engineering operations. This role provides an excellent opportunity for fresh engineering graduates to build a strong technical foundation and develop professional skills.Key Responsibilities:-Assist in day-to-day engineering and manufacturing activities.Support production, maintenance, quality assurance, and project teams.Monitor equipment performance and identify improvement opportunities.Participate in preventive and corrective maintenance activities.Prepare technical reports, documentation, and work instructions.Follow safety standards, company policies, and operational procedures.Analyze engineering data and assist in problem-solving activities.Coordinate with cross-functional teams to ensure smooth operations.Learn and implement continuous improvement methodologies.Eligibility Criteria:-Bachelor's Degree in Mechanical Engineering, Electrical Engineering, or related discipline.Freshers or candidates with up to 1 year of experience.Good analytical and problem-solving skills.Basic knowledge of engineering principles and industrial processes.Strong communication and teamwork skills.Willingness to work in shifts and relocate if required.Preferred Skills:-AutoCAD, CATIA, MS Office, and basic engineering software knowledge.Understanding of manufacturing processes and maintenance concepts.Knowledge of safety standards and quality systems.