Safety Job Vacancies in Nashik

Key ResponsibilitiesPanel Design, Engineering & DraftingSchematic & Layout Design: Design electrical schematic drawings, component layout diagrams, and wiring diagrams using CAD software (AutoCAD Electrical, EPLAN) or manual drafting.Component Sourcing & Bill of Materials (BOM): Prepare detailed BOMs, selecting right-sized circuit breakers (MCB, MCCB, ACB), contactors, relays, timers, PLCs, HMI, and busbars based on load requirements.Standards Compliance: Ensure all panel designs conform to relevant Indian Standards (IS) and international electrical safety codes.Assembly Supervision, Wiring & TestingWiring & Fabrication Supervision: Supervise shop-floor technicians during enclosure fabrication, busbar bending/mounting, component fixing, and internal wiring.Quality Control & Testing: Conduct thorough continuity checks, insulation resistance (Megger) testing, high-voltage (HV) tests, and functional/simulation testing of control logic prior to dispatch.Site Troubleshooting & Documentation: Coordinate with installation teams for on-site panel commissioning, fault-finding, and maintenance of complete as-built wiring manuals.

We are seeking an experienced Extruder Operator to join our team. The ideal candidate will have between 2 to 8 years of experience in operating extruder machinery and be well-versed in the production process.Key Responsibilities:- Operate Extruder Machinery: You will set up and run the extruder equipment to produce quality products, ensuring all machinery functions smoothly and efficiently.- Monitor Production: You will oversee production parameters, adjusting controls to maintain quality and consistency of the extruded materials.- Perform Maintenance: Regular checks on machinery and maintaining cleanliness will be essential to prevent breakdowns and ensure optimal performance.- Report Issues: In case of any malfunctions or irregularities, you will promptly report issues to relevant supervisors to minimize downtime and maintain production flow.Required Skills and Expectations:Candidates must possess an I.T.I. certification and have a strong understanding of machinery operation. Attention to detail and the ability to troubleshoot minor technical issues are essential for maintaining high production standards. You should be comfortable working in a full-time, office-based environment on the Mumbai Nashik Highway and exhibit a strong commitment to safety and quality. Candidates must be male and willing to work collaboratively in a team to meet production targets. Strong communication skills will be beneficial in this role, ensuring smooth interactions with team members and supervisors.

Job Title: EHS Executive (Environment, Health & Safety)Location: NashikExperience: 4-5 YearsQualification: Bachelors/Masters in Environmental ScienceJob Summary:The EHS Executive will be responsible for implementing and monitoring environmental, health, and safety policies to ensure a safe and compliant workplace. The role involves ensuring adherence to statutory regulations, minimizing risks, and promoting a strong safety culture within the organization.Key Responsibilities:Implement and monitor EHS policies, procedures, and standardsEnsure compliance with environmental and safety regulationsConduct safety audits, inspections, and risk assessmentsIdentify hazards and recommend corrective/preventive actionsMaintain records related to safety, environment, and complianceConduct safety training and awareness programs for employeesMonitor waste management, pollution control, and sustainability practicesEnsure proper use of PPE and safe work practicesInvestigate incidents/accidents and prepare reportsCoordinate with government authorities for EHS complianceKey Skills Required:Strong knowledge of environmental and safety regulationsExperience in conducting audits and safety inspectionsGood communication and training skillsProblem-solving and analytical thinkingAttention to detail and documentation skillsPreferred Experience:Experience in manufacturing/chemical industryKnowledge of ISO 14001 & ISO 45001 standardsFamiliarity with pollution control norms and statutory complianceReporting To: EHS Manager / Plant Head

Ensure compliance with site safety rules, statutory safety regulations, and project-specific safety plans.Conduct daily safety inspections of work areas, machinery, tools, scaffolding, and PPE usage.Identify unsafe acts and unsafe conditions and take immediate corrective actions.Conduct toolbox talks, safety inductions, and awareness training for workers and subcontractors.Ensure availability and proper use of Personal Protective Equipment (PPE) such as helmets, safety shoes, harnesses, gloves, etc.Monitor high-risk activities such as:1. Work at height2. Lifting operations3. Excavation & trenching4. Hot work (welding, gas cutting)5. Electrical works6. Maintain safety records including:7. Safety checklists8. Incident / accident reports9. Near-miss reports10. PPE registersInvestigate accidents, incidents, and near misses and prepare root cause analysis reports.Coordinate with site engineers, supervisors, and subcontractors to ensure safety compliance.Ensure fire safety measures, first-aid facilities, and emergency response procedures are in place.Assist in implementing method statements and risk assessments (JSA / HIRA).Stop work if unsafe conditions are observed and report to the concerned authority.

JD - Sr. Manager/ Chief ManagerLocation: Gonde, NashikExperience: 12-15 Years of experience in similar type of industry, Pharmaceutical or Perfume glass Bottle Manufacturing industryQualification: B.E/ B.Tech, Graduate from science background with MBA from reputed university.Role & Responsibilities Review performance against operating plans and approve necessary improvements or corrective actions. Production Planning, Scheduling &Control. Oversee the entire production cycle, from raw material management to finished goods. Enhance in the targeted percentage of glass-to-glass yield & OEE over the last year. Minimize the Production losses, monitor yield, Improvement projects and ensure adherence to established production stan monitor Sops, and best practices. Review and approve departmental budgets, ensuring effective control of spending. Optimize labor, material utilization, and engineering efficiency. Ensure availability and maintenance of required production resources and equipment. Develop, implement, and maintain reporting systems related to production performance and metrics. Provide timely and accurate reports on production activities, deviations, and achievements. Ensure strict compliance with GMP, safety regulations, and good housekeeping standards. Monitor adherence to all company policies, procedures, and regulatory requirements. Drive a safety-focused culture across the production team. Improve product quality and quantity within planned schedule while maintaining cost. Define duties, responsibilities, and accountability for all direct subordinatesMaintain effective communication within the department and with cross-functional stakeholders. Support the implementation of manufacturing and organizational plans aligned with the Operations Master Plan. Collaborate effectively with internal managers and external stakeholders to meet production goals. Lead continuous improvement initiatives to enhance productivity, reduce waste, and improve operational efficiency Perform additional duties as assigned with flexibility and willingness.Important Competencies Production Planning Execution Implementation of TPM & GMP lean manufacturing implementation by using of TPM Kaizen 5S Project ManagementKey Skills Strategic Production Planning SAP- S 4 HANA Team Management Proficient in Excel Time Management & analytical skillsProcess Knowledge

security guard required

Lavero Global company,Canada is currently recruiting experienced expatriates here in our company.we got your email through an in India placement job platform.

Key Responsibilities & DutiesTechnical Support & Operational Execution:Assist senior engineers in day-to-day shop-floor manufacturing, site operations, machinery setup, or chemical process monitoring.Prepare and update basic technical documentation, standard operating procedures (SOPs), production logbooks, and inspection reports.Perform quality checks, dimensional measurements using precision instruments (verniers, micrometers, gauges), or raw material sampling.Design, Drafting & Process Monitoring:Support engineering teams with basic 2D drafting, 3D CAD modeling updates, Bill of Materials (BOM) creation, or process flowcharts under supervision.Monitor equipment performance, record operational parameters, and report line breakdowns or process deviations promptly.Quality Control & Preventive Maintenance:Participate in 5S maintenance, Root Cause Analysis (RCA), and quality defect logging (8D/Kaizen activities).Assist maintenance personnel in carrying out routine preventive maintenance schedules for machines, tooling, or plant utilities.Safety & Compliance:Strictly follow plant safety guidelines, personal protective equipment (PPE) protocols, and environmental health and safety (EHS) policies.Attend all assigned technical training modules, safety drills, and skill development workshops.

Key ResponsibilitiesImplement and monitor workplace safety policies, procedures, and standards.Conduct regular safety inspections, audits, and risk assessments.Identify workplace hazards and recommend corrective and preventive actions.Ensure compliance with applicable safety regulations, statutory requirements, and company policies.Conduct safety induction programs and training sessions for employees and contractors.Investigate incidents, accidents, and near-miss cases and prepare detailed reports.Monitor the proper use of Personal Protective Equipment (PPE) across the workplace.Maintain safety records, permits, checklists, and compliance documentation.Coordinate emergency preparedness activities, mock drills, and evacuation procedures.Work closely with Production, Maintenance, and HR teams to promote a safe working environment.Ensure contractor safety compliance and monitor high-risk activities.Support continuous improvement initiatives related to occupational health and safety.

Key ResponsibilitiesSupervise day-to-day site activities and ensure smooth project execution.Monitor work progress and ensure adherence to project timelines.Coordinate with contractors, vendors, consultants, and internal teams.Ensure quality standards are maintained throughout project execution.Monitor manpower deployment and site productivity.Verify material requirements, deliveries, and inventory at the site.Conduct regular site inspections and ensure compliance with safety regulations.Prepare daily, weekly, and monthly progress reports.Resolve site-related issues and coordinate corrective actions.Maintain project documentation, work records, and site reports.Ensure compliance with company policies, project specifications, and statutory requirements.