Quality Check Jobs

Log Debarker - removes bark from wood logs.Veneer Peeling Machine / Lathe - peels logs into thin veneer sheets.Veneer Clipper - cuts veneer sheets to the required size.Veneer Dryer - removes moisture from veneer.Glue Spreader - applies adhesive/resin to veneer.Veneer Composer / Splicer - joins smaller veneer pieces.Cold Press - initially presses the veneer layers together.Hot Press - applies heat and pressure to bond the plywood permanently.Panel Saw / Sizing Saw - cuts plywood panels to exact dimensions.Sanding Machine - smooths and calibrates the plywood surface.Edge Trimming Machine - finishes the edges.Putty/Coating Machine - used for surface finishing, depending on the product.Boiler & Thermic Fluid Heater - provides heat/steam required for the production process.Air Compressor - supplies compressed air for pneumatic equipment.Dust Collection System - collects wood dust from cutting and sanding operations.

The Quality Engineer is responsible for establishing, maintaining, and improving quality control systems within the manufacturing plant. This role ensures products meet customer specifications, regulatory standards, and internal quality metrics through process monitoring, testing protocols, root-cause investigations, and supplier quality management.Key ResponsibilitiesProcess & Product Quality ControlEstablish quality standards, Control Plans, and Standard Operating Procedures (SOPs) for inline manufacturing processes.Oversee Incoming Quality Control (IQC), In-Process Quality Control (IPQC), and Final Quality Assurance (FQA) activities.Conduct mechanical, dimensional, metallurgical, and hardness testing on raw materials and finished parts.Defect Analysis & Corrective ActionsLead Root Cause Analysis (RCA) using structured problem-solving methods (8D, 5-Why, Fishbone Diagram) for non-conformances.Issue and manage Corrective and Preventive Action (CAPA) requests to resolve recurring manufacturing defects.Disposition non-conforming materials and coordinate Material Review Board (MRB) activities.Quality Systems & AuditsMaintain compliance with QMS standards (ISO 9001, IATF 16949, or ISO 13485 depending on plant focus).Lead internal process audits and participate in customer or third-party certification audits.Prepare and execute Process Failure Mode and Effects Analysis (PFMEA) and Measurement System Analysis (MSA).Supplier & Customer QualityEvaluate supplier performance, inspect raw material lots (bar stock, castings, turned parts), and manage Supplier Corrective Action Requests (SCARs).Interface directly with customers to address technical inquiries, quality complaints, and PPAP (Production Part Approval Process) submissions.

We are hiring for the position of Quality EngineerShe should be having hands on experience of Spectrometer.Hands on experience of Sand testing laboratory.Good knowledge of ExcelStatistical TechniqueQualification - Diploma

As a Quality Checker, you will play an essential role in ensuring that products meet the established standards of quality before they reach customers. Your primary responsibilities will include:- Inspect Products: Carefully examine products on the production line to identify any defects or issues. This ensures that only high-quality items are shipped to customers.- Document Findings: Record any issues or defects noted during inspections. Accurate documentation helps track quality trends and areas for improvement.- Communicate Issues: Report defects or quality concerns to the production team or management. Effective communication can help quickly resolve problems and maintain quality standards.- Conduct Tests: Perform simple quality tests to determine if products meet specifications. This may include measuring dimensions, checking weights, and testing functionality as needed.- Follow Procedures: Adhere to established quality control procedures and guidelines. Following these protocols ensures consistency and reliability in the quality checking process.To succeed in this role, you should possess the following skills and qualities:- Attention to Detail: A keen eye for spotting flaws and ensuring that all products meet quality standards is crucial.- Good Communication Skills: The ability to communicate clearly with team members and report findings effectively is essential.- Basic Technical Skills: Familiarity with quality control processes and tools is an advantage.- Team Player: Being able to work closely with others and contribute positively to a team environment is important.- Willingness to Learn: As a fresher, eagerness to understand and adapt to quality control practices will be beneficial.

As a Footwear Designer in Bhiwandi, you will create innovative shoe designs that appeal to consumers while ensuring they are functional and comfortable. Key Responsibilities:- Design Creation: Develop new shoe styles by sketching and using design software, focusing on aesthetics and trend relevancy. - Material Selection: Choose appropriate materials that enhance durability and comfort while aligning with design intentions. - Prototype Development: Work closely with production teams to create prototypes, ensuring designs meet manufacturing standards. - Trend Analysis: Research and analyze market trends to inspire timely and relevant designs, ensuring competitiveness in the market. - Collaboration: Coordinate with marketing and sales teams to understand consumer needs and preferences, enhancing the design process. - Quality Control: Assess samples and final products to ensure they meet specified quality standards and design expectations. Required Skills and Expectations:Candidates should have a creative mindset and a strong eye for detail, allowing them to design fashionable yet practical footwear. Proficiency in design software such as Adobe Illustrator or Photoshop is essential for creating detailed designs. Good communication skills are necessary to effectively collaborate with team members and present ideas. A basic understanding of materials and production processes will be beneficial. Candidates should be able to work independently and manage multiple projects within deadlines. Previous experience in footwear design, whether in various styles or markets, will be an advantage. Candidates should be adaptable, always open to learning new design techniques and trends.

Key ResponsibilitiesMonitor and control in-process quality activities to ensure compliance with established quality standards and specifications.Conduct process audits, inspections, and quality checks during production.Investigate quality issues, identify root causes, and implement corrective and preventive actions (CAPA).Analyze quality data and prepare reports on defects, scrap, rework, and process performance.Support production teams in resolving quality-related concerns and preventing recurrence.Develop and maintain quality control plans, inspection procedures, and work instructions.Ensure compliance with customer requirements, internal quality systems, and applicable industry standards.Participate in continuous improvement projects using quality tools such as 7 QC Tools, PDCA, Kaizen, Six Sigma, and Lean Manufacturing.Coordinate with suppliers, production, engineering, and maintenance teams to improve product and process quality.Support customer audits, internal audits, and certification audits as required.Train operators and production personnel on quality standards, inspection methods, and defect prevention techniques.

We are looking for Packing supervisor Role And Responsibility Supervise daily packing and labeling operations.Ensure correct quantity, packing material, batch & MFG/EXP details.Maintain hygiene, quality and production standards.Manage packing workers and allocate duties.Maintain packing records and report production/issues to management.Ensure proper storage and stacking of finished goods.

Required site supervisor for site management and update report with check of certain finish and quality of working.

Must be 10th/12th Pass who can work for Packing supervisorready to work in Agrafull time jobinterested candidates can apply.

As a QA QC Engineer, you will play a vital role in ensuring the quality and compliance of products and processes. You will be responsible for maintaining excellent standards in our production line.Key Responsibilities:- Quality Control Inspections: Conduct regular inspections of materials and finished products to ensure they meet specified standards and regulations.- Documentation and Reporting: Maintain accurate records of quality control activities, including inspections, tests, and compliance reports to provide insights into quality trends.- Collaboration with Production Teams: Work closely with production teams to understand processes and identify areas for improvement, ensuring quality standards are upheld.- Implement Quality Assurance Processes: Develop and implement effective QA processes that support continuous improvement and consistency in production.- Root Cause Analysis: Investigate quality issues to determine their root causes and work on corrective actions to prevent recurrence.- Compliance with Standards: Ensure all operations comply with industry standards and regulations, emphasizing safety and quality.Required Skills and Expectations:Candidates should have a diploma in a relevant field, with 0 to 2 years of experience in quality assurance or quality control. Strong attention to detail is crucial, alongside problem-solving skills to address quality issues effectively. Ability to work collaboratively in a team environment and communicate clearly with various departments is essential. Candidates must be comfortable working in an office setting and demonstrate a commitment to maintaining high-quality standards in all aspects of work.

-Check and verify the quality parameters of raw plastics, resins, masterbatches, colourants, additives, etc., as they arrive (conforming to internal specifications, ISO standards).-Inspect incoming packaging components (caps, closures, jars, bottles) for dimensional accuracy, material integrity, surface defects, colour consistency, etc.-Maintain records of material certificates (COAs), lab test reports, lot numbers, supplier performance data.Supervise production stages (injection moulding, blow moulding, extrusion, finishing operations) to ensure process parameters (temperature, pressure, cycle time, cooling time, dimensional tolerances) are maintained.-Prepare/issue Non-Conformance Reports (NCRs) for rejects and coordinate the segregation of defectives.-Use the in-house Quality Control Laboratory to perform tests such as melt flow index, gloss meter, micrometer, vernier caliper, weight measurement, height gauge, etc.

We Are Urgent Opening For Quality Engineer - Fresher- Mnc CompanyQms & Mr-Systems & Control Inward& In Process Quality SqaCustomer Quality & Audits Iatf & DocumentationPre-Dispatch Inspection Client Mgmt Vendors Audit & SystemCustomer Complaints HandlingQualification- Diploma / B.E- MechanicalContact Person- Deepak - 7757087059

Key ResponsibilitiesCoordinate inbound and outbound logistics activities.Plan and monitor transportation schedules to ensure timely deliveries.Liaise with transporters, suppliers, vendors, and customers regarding shipments.Track shipments and resolve delivery issues promptly.Maintain logistics records, shipment documents, invoices, and reports.Monitor inventory movement and coordinate with warehouse teams.Ensure compliance with company policies and transportation regulations.Negotiate freight rates and logistics service agreements when required.Analyze logistics costs and identify opportunities for process improvement.Prepare daily, weekly, and monthly logistics performance reports.Support supply chain operations and optimize distribution efficiency.

Hiring for 4 Quality Engineer Jobs in Faridabad, with minimum 1 Year Experience,Required Educational Qualification is : Other Bachelor Degree, Post Graduate Diploma with Good knowledge in Documentation, 7qc Tool, Drawing, Quality Check, Line Inspection, Final Quality, Inprocess Inspection etc.