Process Engineer Job Vacancies in Navi Mumbai

We are seeking a dedicated Production Engineer to join our team in Navi Mumbai. The ideal candidate should have 2 to 8 years of experience and hold a relevant diploma. This full-time role requires male candidates who can work from the office.**Key Responsibilities:**- **Monitor Production Processes:** Oversee daily production activities to ensure efficiency and adherence to quality standards, making adjustments as needed.- **Troubleshoot Equipment Issues:** Identify and resolve any mechanical or operational issues in the production line to minimize downtime and maintain productivity.- **Implement Production Improvements:** Analyze production data and suggest improvements to enhance output and reduce waste, contributing to the overall efficiency of operations.- **Coordinate with Teams:** Collaborate with other departments, such as quality control and maintenance, to ensure smooth production flow and address any interdepartmental challenges.- **Maintain Documentation:** Keep detailed records of production outputs, machinery maintenance, and other essential processes to ensure compliance and facilitate improvements.**Required Skills and Expectations:**Candidates must have a strong understanding of production techniques and equipment. Effective problem-solving skills are essential, along with the ability to work under pressure. Strong attention to detail and a commitment to safety standards are expected. Good communication skills will help in working collaboratively with other team members. A proactive attitude and a willingness to learn and adapt to new technologies are also important for success in this role.

Job Summary: We are seeking a motivated and skilled CFD Engineer with 2 - 4 years of industry experience to join our engineering team. The ideal candidate should have a strong understanding of fluid dynamics and thermal analysis, practical experience with commercial CFD software and the capability to address real-world engineering challenges across sectors such as automotive, HVAC, turbo machinery, electronics cooling, process equipment or aerospace. Key Responsibilities: Perform CFD simulations including geometry preparation & clean-up, meshing, solver setup and post-processing Analyze fluid flow, heat transfer and related physical phenomena across various systems Validate CFD results with test data and support design improvements Prepare detailed technical reports and presentations to communicate findings Collaborate with cross-functional teams including design, testing and manufacturing Optimize product designs using simulation-driven insights Maintain project timelines and deliverables with high-quality standards Required Skills and Qualifications: Bachelors or Masters degree in Mechanical / Aerospace / Automotive / Chemical Engineering or related field 2 - 4 years of hands-on experience in CFD analysis using tools like ANSYS Fluent, CFX or similar Strong knowledge of fluid dynamics, heat transfer and turbulence modeling Experience in preparing CAD geometry using SolidWorks or equivalent Familiarity with pre-processing tools such as SpaceClaim, Design Modeler and/or ICEM CFD Proficiency in meshing tools such as ANSYS Meshing and/or ICEM CFD Hands-on experience with OpenFOAM is an added advantage Basic programming or scripting skills in Python (or equivalent) for workflow automation Good written and verbal communication skills Ability to work independently and as part of a team in a fast-paced environment

Knowledge of Production Process. Knowledge of Fabrication. Efficiency to make decisions and problem solving. Supervising the manufacturing processes, ensuring quality work is done in a safe, efficient manner. Liaising with other department to achieve production deadlines. Ensure safety in factory and meet relatable compliances aligned with factory. Excellent leadership quality and able to manage workforce.

Assistant Electronic EngineerResponsibilities1. Program Development and Implementation: Designing and writing PLC programs: This involves translating process requirements and control logic into ladder logic, function block diagrams, structured text, or other PLC programming languages. Implementing Human-Machine Interfaces (HMIs): Designing and configuring HMIs for operator interaction and visualization of process data. Testing and debugging programs: Thoroughly testing programs in simulated and real-world environments to identify and resolve errors.2. System Integration and Commissioning: Integrating PLCs with other automation components: Connecting PLCs to sensors, actuators, motors, and other devices. Commissioning and start-up of automated systems: Overseeing the installation, testing, and start-up of automated systems, ensuring they function correctly and safely. Troubleshooting and resolving system issues: Diagnosing and resolving problems with PLC programs, hardware, and communication networks. Calibrating instruments and devices: Ensuring accurate and reliable operation of sensors and actuators, temperature meter, etc.3. Maintenance and Support: Maintaining and updating existing PLC programs: Modifying programs to accommodate process changes, improve efficiency, or address issues. Providing technical support to operators and maintenance personnel: Assisting with troubleshooting, training, and documentation. Performing preventive maintenance on PLC systems: Regularly inspecting and testing PLC hardware and software to prevent failures. Documenting PLC programs and system configurations: Documenting the machine operational, troubleshooting and preventive maintenance manual. Creating and maintaining detailed documentation for program logic, hardware configurations, and troubleshooting procedures. Backing up PLC programs: Ensuring the safety of the programs through routine back-ups.4. Communication and Collaboration: Communicating

Qualification & Experience03 to 08 years of ExperienceB.Tech / M.Tech - ChemicalRole and Responsibilities: Preparation and Updating of Process Flow Diagrams (PFDs) Preparation and Updating of Piping Instrumentation Diagram (P&IDs) Maintain Master copies, Check prints and Final copies of Deliverables. Hydraulic Calculations for single phase and Two-phase lines Pump hydraulic calculation for single loop and multi loop systems Control Valve Sizing Datasheet preparation for Equipment and Instruments Thermal design of heat exchanger using HTRI/ EDR PSV sizing calculations using API-520/521 Tank sizing and Inbreathing/ Outbreathing calculation Vendor document review Software Proficiency; Aspen Hysys , HTRI

A well known Manufacturing company in the field of Process Instrumentation like Temperature Controller, Sensors ,PID ,etc is looking for Business Development for Mumbai location .Desired Candidate :Male, Diploma/ Degree in Electrical/Electronics/Instrumentation EngineeringShould have 2/4 years experience in Business development in Instrumentation/ Industrial Automation products Good knowledge of  OEM handling,and ready to visit prospective customers Knowledge of CRM software and sales tools for efficient sales management.Well verse in PLC ,HMI Ready to travelSalary : As per the market normsIf interested kindly mail us your updated resume with salary details and notice period to os.consultancy@hotmail.com

Job Description: Assist the sustainability lead to assess various plastic recycling technologies - Identify, understand, and evaluate plastic recycling technologies. To Identify opportunities in various biopolymer product/technology and bio composites. Assessment of various technology for sorting / segregation and cleaning of waste plastic for mechanical recycling Support for preparation of overview/prefeed documents for new projects Validate equipment data sheets prepared by consultant/ engineering contractor for various projects. Execute process design calculations for the various schemes. Assist to develop process design package using appropriate tools. Identify opportunities for product quality enhancement/ product upgradation. Participate in pilot / commercial plant trials. Understand and evaluate basic engineering design documents. Validate modifications to ensure specified standards and codes are followed in calculations. Participate in PHA/ HAZOP of new projects/ modifications. Contribute to derive value from technology network. Understand and be abreast with legislation/ regulation as and when mandated by CPCB/ MoEF, GoI.Skills and Competencies Sound knowledge regarding polymerization process and technology. Knowledge on polymer product, processing, and applications. Experience in polymer plant operation / technical service domain Knowledge of chemical engineering and process technology Ability to plan / discuss results and network under the guidance of senior colleagues. Process design calculations at Skill level Use of process calculation templates at Skill level Process simulation skills Use of Six sigma for problem solvingEducation RequiredBE/B Tech in Chemical Engineering from a reputed instituteMBA will be added advantage.Experience Required3 to 4 years of experience with at least 2 years in plant Operations / CTS

Locations : Hiranandani Thane / Powai.Engineer / Senior Engineer / Manager Process (Thermal) Department Work Experience Level: 3- 10 years of Process (Thermal) Design experience in Fired Heater IndustryMinimum Education: B.E. / B. Tech. (Chemical / Mechanical Engineering) from a government recognized reputed institute/university.Technical Experience: Candidate should be good in: Process design / sizing of radiant / convection section, stack, air-preheater, fans, ducting, fuel skid, process / utility piping. Fired heater simulation using FRNC-5PC software. Basic Thermal design of Fired Heaters for non-licensed applications like CDU, VDU, Hydrotreater, Reboilers, Hot Oil, Gas Heating, Steam heating etc. Preparation of datasheets of Fired Heaters and its auxiliaries i.e. Air Preheater, ID/FD Fans, Steam Air Preheater, Soot-blowers, steam drum, dampers, decoking drum, venturi, BFW pump, SCR etc. P&IDs, Cause & Effect Diagrams, Control Narratives & Startup/Shutdown procedure etc. of Fired Heaters. Safety in combustion control including HAZOP & SIL reviews. Review of sub-supplier offers and post order documentation of Burners, APH, SAPH, ID/FD Fan, Soot-blower, dampers, pumps, SCR etc. The person should have good knowledge of: Relevant codes / standards (API 560, API 530, API 556, API 573, NFPA 85, EN 746 etc.). Typical licensors specifications (e.g., Shell, UoP, Chevron, Axens etc.) for Fired Heaters. Pre-commissioning, commissioning, refractory dry-out and start-up of heaters/reformers. Should be able to provide information / data required to be furnished by the Thermal department to other engineering disciplines (mechanical, piping, instrumentation etc.) to carry-out their work. Support proposal department in carrying out design and datasheet for prospective jobs. Participate in Kick-off

a. To process survey data with help/guidance of surveyor b. To plot and prepare hydrography chartsc. To calculate surface volume and prepare reportd. Familiar with coordinate system, lat-long, UTM etce. Prepare drawings and charts in model and layout (with scales)f. To plot charts using plotter, plotter, ink-paper, management g. Familiar with CIVIL 3D (Surface, Contacor, Point Group volume surface)h. Post survey , data processing, preparing and analysis the survey datai. To produce a meaningful outcome useful to client as per scope

-We are looking for a qualified Technical Sales Representative with 0-2 years of experience in the technical sales of Water Treatment and Waste Water Treatment Solutions.- The ideal candidate should have in-depth knowledge of the customer base in Western India and a strong understanding of various water treatment technologies, including STP technologies (MBBR, SBR, and MBR) and ETP technologies (Physiochemical systems, Aerobic, and Anaerobic systems).- The candidate should also possess a Diploma/Degree in Mechanical Engineering or Chemical Engineering.

Urgent opening for Process & Proposal EngineeringProcess & Proposal EngineeringProcess &Proposal Trainee EngineeringService Manager -1-BEO & M in-Charge -1- BE-Chemical EngineeringJob Location CBD BELAPUR

we have urgent requirement for production engineerjob description -Plan and coordinate production engineering processes on daily basis to produce high quality products.Execute production schedule for achieving planned production planning timely & accurately along with optimum utilization of resources.Acting efficiently on schedule of Work order and Raw Materials.Ensure accuracy in production as per the specifications of design of products.Ensure least breakdown time for the Machines.Monitor product standards and implementing quality-control programs.Planning of tools and Accessories, and Monitoring Machines Maintenance.Accurate and timely reporting to the management.Ensure that health & safety guidelines are followed properly.Maintain Daily / Weekly / Monthly Production Reports and MIS.Supervise and motivate team members to meet production targets.Ensure proper housekeeping of the premises by the team.Executes lean and 5S standards for existing production lines as per the guidelinesDrive root cause analysis and improvement proposals.qualification - diploma or be mechanical exp- min 2 to 8 yrs job locations - thane , navi mumbai ,mumbai ,bhiwandi , asangaon , panvel , vasai , khopoli

1. Knowledge of the complete tendering and procurement process2. Hands-on experience on vendor registration, Government portals, etc.3. Technical and commercial requirement evaluation of tender papers and checks the eligibility criteria4. Filling tenders, knowledge of tender and can evaluate & understand the eligibility criteria of the tender, understand the targets, shortlist the tender accordingly.5. May have to visit different offices and gather pieces of information related to the tender.6. Follow-ups, attend and coordinating for pre-bid meetings, commercial and technical negotiations. Prepare documentation of meetings7. Experienced in preparing quotations and submitting through portals for online and submitting personally in the offline process.8. Coordinating with the internal team in the tendering process.9. Checking and uploading documents required for tender.10. Candidates from similar industry preferred.

Observe machine operations to ensure quality and conformity of filled or packaged products to standards.2. Adjust machine components and machine tension and pressure according to size or processing angle of product. 3. Tend or operate machines that package products.4. Remove finished packaged items from the machine and separate rejected items. 5. Regulate machine flow, speed, or temperature. 6. Stop or reset machines when malfunctions occur, clear machine jams, and report malfunctions to a supervisor. 7. Inspect and remove defective products and packaging material.8. Clean and remove damaged or otherwise inferior materials to prepare raw products for processing. 9. Sort, grade, weigh, and inspect products, verifying and adjusting product weight or measurement to meet specifications, as per the standards of packaging specified by the company. 10. Store Clean and maintain the parts and raw materials of the packaging department. 11. Clean, oil, and make minor adjustments or repairs to machinery and equipment, such as opening valves or setting guides.12. Monitor the production line, watching for problems such as pile-ups, jams and plan according to the requirement of the production and marketing department. 13. Make timely reports for all input output rejected etc., all relating to the packaging and electrical machinery. 14.Check and maintain all electrical, gaseous, mechanical arms of the machinery.

Educational Qualification: B.tech in IndustrialEngineering from recognized Technical Board/ Institute with not less than 50% marks. Diploma (Preferred)JOB DESCRIPTION To calculate the cycle time & motion study of all machines/workstations Time Study/Motion study/Machine scheduling. Time Study/Motion study/Machine scheduling. To ensure daily machine scheduling, monitor, and control. To ensure two days advance production plan and freeze it. To calculate the OEE & TACT time To minimize the changeover time by work standardization & time study.For More Details Please Visit This Site:.navratnaindia.in

Educational Qualification: B.tech in ChemicalEngineering from recognized Technical Board/ Institute with not less than 50% marks. Diploma (Preferred)Job description Interpreting operating data of petroleum refineries and devising solutions based on the following: Computer Modeling and Simulations. Process and Equipment Design Principles. Statistical Analysis.Responsibilities and Duties Setup desktop computers and peripherals and test network connections.For More Details Please Visit This Site:.navratnaindia.in