PLC Job Vacancies in Bangalore

Service EngineerJob Description:The Service Engineer will be responsible for ensuring smooth operation, installation, maintenance, and troubleshooting of Strategis machines at customer sites. The role involves close interaction with clients, resolving technical issues, and ensuring customer satisfactionDesired Profile:Familiarity with industrial automation tools and equipment.Strong problem-solving skills and ability to work under pressure.Excellent communication skills to interact with customers and internal teams.Willingness to travel to customer sites within the regionResponsibilities:Installation, commission, and testing of automation machines at customer sitesTroubleshoot and diagnose issues related to electrical, pneumatic, hydraulic, and PLC systems.Perform preventive maintenance and ensure machines operate efficiently.Educate customers on proper machine usage, maintenance procedures, and best practicesCollaborate with the engineering team to improve product design and functionality.Gather customer feedback and report recurring issues to the engineering and design teams to help improve machine design and reliabilityDocument service activities, including reports and technical documentation.Experience: 0- 2 years, preferably in industrial automation or machinery.Location: Delhi, Mumbai, Pune, Hosur & BangaloreFunctional Area: After SalesQualifications: Diploma in Mechanical/Mechatronics or ITI passed

Siemens PLC programmer and Kuka Robot Commissioning and Maintenance.Job Responsibilities:Program DevelopmentDevelop equipment programs based on equipment operation flowcharts;Adjust program logic according to actual on-site requirements to meet project needs.On-site CommissioningConduct on-site debugging and optimization of equipment;Provide operation training to relevant personnel.Issue Feedback & TrackingReport all issues identified during commissioning to relevant departments;Follow up on the progress until issues are resolved.Qualifications:More than 3 years of experience in robot maintenance or on-site commissioning.Proficient in at least one mainstream robot simulation, offline programming, and debugging tool.Familiar with at least two robot applications such as material handling, machine vision, tightening, etc.Experience in leading or participating in equipment bidding, introduction, and on-site commissioning for new factory setup is preferred.Strong problem-solving skills, clear logic, proficient use of problem-solving tools, and result-oriented mindset.Strong sense of responsibility, positive attitude, good teamwork spirit, and excellent communication skills.Diploma or above in Mechatronics, Electrical Engineering, or related fields.Able to work overtime for equipment optimization and debugging when required.Experience in new energy module & PACK production lines is a strong plus.

About the Role:This role requires a strong understanding of Industrial IoT (IIoT), smart factory solutions, automation, and digital transformation in manufacturing. The ideal candidate will be responsible for new business development, client acquisition, account management, and revenue generation from customers in the South Indian market. (Karnataka, Tamil Nadu, Andhra Pradesh & Telangana).Key Responsibilities:Sales & Business Development Identify and engage potential customers in manufacturing, automotive, oil & gas, energy, and other industrial sectors for IIoT solutions. Develop and execute a territory-specific sales strategy to expand market presence. Generate leads, schedule meetings, and conduct product demos to showcase IIoT solutions. Convert prospects into long-term clients by understanding their pain points and offering Standard/tailored IoT solutions. Meet and exceed sales targets, revenue goals, and market penetration KPIs. Build and maintain strong relationships with key decision-makers (CXOs, Plant Heads, IT Managers, etc.). Work closely with technical teams to provide IIoT solutions based on customer needs. Ensure seamless post-sales support and account management for long-term business growth. Identify upsell and cross-sell opportunities for existing accounts.Market Research & Competitor Analysis Stay updated on market trends, competitor offerings, and emerging IIoT technologies. Provide feedback to the product and marketing teams to refine offerings and improve value propositions. Represent the company at industry conferences, trade shows, and networking events to enhance brand visibility. Maintain accurate records of sales activities using CRM tools and provide weekly/monthly sales reports to management.Required Skills & Qualifications: 4-7 years of experience in B2B sales, preferably in Industrial IoT, automation, or industrial technology solutions. Proven track record in selling IIoT solutions, SaaS platforms, automation software, or smart factory solutions. Strong understanding of manufacturing operations, Industry 4.0, predictive maintenance, remote monitoring, and digital transformation. Excellent communication, negotiation, and presentation skills. Ability to analyze customer pain points and propose tailored technology solutions. Willingness to travel extensively across the South region for client meetings and industry events.Preferred Qualifications: Experience working with PLC/SCADA, IoT analytics. Knowledge of industrial communication protocols such as Modbus, OPC UA, MTConnect. Prior experience in selling to large manufacturing plants, automotive OEMs or smart factories. Engineering background (B.E/B. Tech in Electronics, Instrumentation, Mechanical, or Computer Science) is a plus.For more information, please visit our website and social media pages. Website: www.sfHawk.com Instagram: Smarter Factory Solutions (@sfhawk_) LinkedIn: sfHawk LinkedIn

Scope of Work: Regular preventive maintenance of all equipment on the manufacturing line, including comprehensive checking, cleaning, and testing. This maintenance is to be carried out once every month for a period of 12 months. The contractor shall bear all expenses related to the maintenance activities except for replacement or repair of parts. Deputation of 3 skilled Engineers as specified by the customer to ensure smooth maintenance operations and equipment performance. Immediate deputation of Engineer(s)/Technician(s) for attending to breakdowns or complaints as and when notified by the customer. Ensure satisfactory performance and upkeep of the capital equipment throughout the contract period.

Need Plc control panel wiring

Bachelors degree in Electrical/Electronics/Instrumentation Engineering Degree from an accredited college or university.Minimum 3 years of experience in BMS Engineering, Testing & CommissioningSCADA, PLC, BMS engineering/programming experience preferred.Strong understanding of OPC, BACnet, Modbus protocol to include IP, ETH and MS/TPDesign, development, commissioning, and testing of Building automation systemsBMS/SCADA/HMI graphic screen developmentIO Loop test and Functional testBasic knowledge on SQL database programming.Excellent problem-solving and troubleshooting skillsProviding technical support to clientsExperience with current trends in automation and instrumentation to be able to select and implement modern controls architecturesStrong communication and organizational skills

Technical Support

Job Description: (Pre-order work)Making concept ArchitectureMaking BOMMaking EstimationKnowledge on below area required:Automation systemsElectrical circuit drawingsCapability to understand process of the requirementsUnderstand the language of PLCHold on spoken languages to impress customers (English/Hindi/Kannada/Tamil)

Skills Required -Knowledge about basic Hand Tools of ElectricianBasic Knowledge required like that tool Kit, multimeter , Screw Driver, solder Gun, crimper, cutter etc.Knowledge required Soldering related wiring.Basic wiring related Knowledge of electrical components PLC, VFD (variable frequency drives), switch gears, circuit breakers, contactors, relays, isolator, sensors, solenoid valves and various types of switches, cables, connectors.Ability to read and understand electrical schematic drawings, specifications, and wiring diagrams.Marking out for component fit and fitting of components on panel plates.Wiring of control panels.Having experience in Industrial Instrument wiring such as control panel, electronic boxes etc.Job DescriptionWiring of Electronics PCBs / Networking VFD & PLC WiringInhouse and Onsite WorkQualification :ITI (Electronics/Electrician/Wireman)Experience :2 to 3 YearsNOTE: Candidates having experience of genic wiring in buildings are not applicable

PLC Trainer:Responsible for delivering workshops & training programs, module preparation, queries handling of studentsPlanning, Coordinating and Consulting on the new technologiesTraining of students in Automation and BMS (PLC, SCADA, HMI, Electrical, Electronics & VFDs, Electro Hydraulic & Pneumatic, CCTV,ACS,PAGA.,LAN and Telephone System,TRS,FIDS,MCS.)Conduct training on Industrial Automation like PLC,SCADA,HMI for students and working professionalsPrepare Training Kits, training videos, training documents and training videos etc.In house training and hands on practice should be given to customers/ System Integrators/ Sales Personsmanage the training schedules and training activitiesDeliver seminar presentations to customers remotely with ZOOM/SKYPE/Google Teams etc.Prepare demo applications for product demonstration and trainingPrepare and maintain repository with detail and up-to date technical information related to productsPrepare relevant technical information, wiring and installation details and drawings for product brochures, data sheets, Manuals, application notes, training manualsTravel to customer site and locations for training as and when requiredwork as technical coordinator in technical support department when requiredManage the creation of relevant and engaging digital content for publishing onto various digital platformsSkills:PLC SCADA HMI VFDSchneider Electric - M340,Allen Bradley - Micrologix,Delta,Omron,Mitsubishi,Siemens-S71200SCADA : Wonderware Intouch, Citect, WinCC, FactoryTalkViewHMI: Delta Siemens SchneiderVFD : Altivar, Sinamics

PLC Programmer, Service Engineer

Required Experienced candidates, with good knowledge & skills

Providing on-site or remote technical support for installation and commissioning of equipment and routine maintenance independently, identifies technical problems and makes analysis through remote or on-site activity in different Service categories. Consulting with and advising customers on the best service solutions in accordance with standard processes, procedures and safety guidelines. Creating and maintaining strong relationships with customers, understanding their needs and providing specialist support and solutions. Coordinating and executing specialist projects through planning, meeting milestones and regular reviews. Identifying opportunities for the development of new service applications, equipment and methods. Living our companys core values of safety and integrity, which means taking responsibility for your own actions while caring for your colleagues and the business. Coordinating with internal team to get or share required solutions to resolve issues in on time and to keep updated informations with team. Other tasks and duties as assigned from time to time.

- PLC Programmer- Experience on SPM Machine Building and Automation- Knowledge on Pneumatics, Hydraulics, Sensors, Robotics

Hiring for 1 Electrician Job in Bengaluru, Karnataka, for Freshers,Required Educational Qualification is : Diploma with Good knowledge in PLC etc.

We are looking for 2 Electrician Posts in Bangalore, with deep knowledge in PLC, Electrical Maintenance, Panel Wiring, CNC Engineer, CNC Machine Operator, CNC Lathe Technician and Required Educational Qualification is : Diploma

1. Knowledge about 3 phase and single circuit 2. SMPS 3. Servo motor 4. Pnp and npn sensor 5. PLC 6. Sensors 7. Photo sensor , fibre optic sensors , keyence sensors , omron sensor 8. Vision control 9. Pneumatics, FRL,

We are in the business of conveyors, machineries & automation. We need Electrical engineers with Auto CAD/Solid works knowledge, who can understand Electrical equipment and components.Designation:- Electrical EnggVisit to customer placeDiscussion with customerConceptual/Design drawingBOQElectrical: AutoCAD/Solid Works experience required/ PLC

Bachelors degree in Electrical, Electronics, Mechatronics, or related engineering fields.6+ years of experience in Process industries with Siemens technologies.Hands-on expertise with Siemens PLCs (S7-1200, S7-1500, S7-300, etc.) and SCADA systems (WinCC, TIA Portal).Strong programming skills in Ladder Logic, Structured Text (ST), or Function Block Diagram (FBD).Proficiency in configuring communication protocols like Profinet, Profibus, and Modbus.Knowledge of industrial safety standards and practices.Experience with servo and VFD drives (e.g., Sinamics).Familiarity with industrial sensors, actuators, and I/O modules.Strong problem-solving and troubleshooting skills.Excellent communication skills for effective collaboration with teams and clients.

Job responsibilities includes:-** Study and review of P&ID, Process flow diagram (PFD) with respect to the Instrument types and process description.** Review of process datasheets, plot plan, Line list, Piping material specifications, equipment layout, vessel datasheets, area classifications etc.** Preparation of Instrumentation Data sheets for various flow, level, pressure and temperature instruments.** Adept to Pressure Safety Valves and Pressure Control Valves sizing with actuators using API 520 and ISA 75 standards respectively.** Preparation and finalization of installation standards: process & pneumatic hook ups.** Preparation of Installation Hardware MTO.** Flow element sizing calculations using ISO 5167 Standard.** Preparation of Functional Schematic diagrams.** Instrument/Electrical interface details.** Material Requisition for Various Instruments.** Preparation of Instrument Index / IO List.** Preparation of Cable & JB schedule.** Cable Block diagram and Loop wiring diagram from field instruments to DCS/ESD Marshalling cabinet & system cabinet.** Junction Box Wiring Diagram.** Preparation of Level sketches.** Preparation of Instrument JB Location Layout.** Preparation of Air Connection Layout.** Cable Tray and Trench layout.** Cable Tray MTO including all fittings and accessories.** Review of quotations, preparation of technical questionnaire, technical bid analysis and purchase requisition etc. for the same.** Involvement in HAZOP studies and further node wise preparation of HAZOP worksheets which include the deviations, causes, consequences, existing safeguards and recommendations.** Basic knowledge of DCS and PLC Systems, System Architecture, Cabinet / Panel GA for DCS, SIS and PLC systems.

B.E/Diploma in EEE, ECE, E&I, Mechatronics 2 - 3 yrs experience in Machine Building & Automation Sound Knowledge in Automation Exposure to Robotics Hands on PLC,HMI,SCADA programming Labview programming Electrical Control Design Knowledge in Pneumatics Good communication skills Willing to travel