Mechanical Designer Jobs

Key ResponsibilitiesProduct Design & Development: Conceptualize, design, and detail mechanical parts, mechanisms, and assemblies using 3D CAD software (e.g., SolidWorks, Creo, CATIA, or AutoCAD).Prototyping & Testing: Build functional prototypes, define test plans, and conduct rigorous validation and durability testing to ensure designs meet performance, safety, and reliability standards.Engineering Analysis: Perform structural, thermal, and kinematic analyses (using hand calculations or FEA/CFD simulation tools) to optimize designs for weight, strength, and cost.Design for Manufacturing (DFM/DFA): Collaborate with manufacturing partners and suppliers to ensure designs are optimized for mass production, assembly efficiency, and cost reduction.Documentation: Create and maintain comprehensive engineering documentation, including 2D manufacturing drawings, Bill of Materials (BOMs), assembly instructions, and Engineering Change Orders (ECOs).Cross-Functional Collaboration: Work alongside electrical, firmware, quality assurance, and project management teams to resolve technical challenges throughout the product lifecycle.

Job Profile:a) Summary: Required Executive Mechanical with experience of 5 to 8 Years. b) Job Responsibilities: 1) Should have experience of positive displacement pump as well as Rotary pump, Axial flow pump, Centrifugal pump, magnetic drive pump etc. 2) Should have knowledge of mechanical seal of pump and agitator.3) Should have worked in plant like Hydrogenation, MEE, Spray dryer etc.4) Need to procure spares keeping min inventory and avoid stoppage of equipment. 5) Should able to find root cause of critical or frequent failure of equipment. 6) Should adopt/aware of best maintenance practice to avoid/reduce breakdown.7) Should able to maintain data for equipment trouble shooting like History card, service report etc.8) Should able to guide technician to improve maintenance practice.9) Should have knowledge of different MOC like 304,316,316Ti. c) Required Skills/Certifications: NAd) Other Requirements: Shall have worked in Chemical/Dyes/Mechanical Industry/company in engineering department. Shall be able to lead a team of Technicians and manage shift. e) Employee Benefits: PF, Gratuity, Bonus, Free Transportation, Free Canteen, Mediclaim (For full Family), Referral Benefits and Monthly Performance Incentive.

We are looking for a Mechanical Design Engineer/Designer with proficiency in AutoCAD (2D) and SolidWorks (3D) to design industrial equipment such as Powder Coating Plants, Liquid Paint Plants, Conveyors, Ovens, Pretreatment Systems, and Fabricated Structures.Requirements:Diploma/B.E. in Mechanical Engineering0-2 years of experience (Freshers with strong CAD skills may apply)Good knowledge of AutoCAD & SolidWorks (Parts, Assemblies, Sheet Metal, Weldments & Drawings)Ability to prepare GA drawings, fabrication drawings, BOMs, and manufacturing drawingsBasic understanding of fabrication, sheet metal, and industrial machineryGood communication and teamwork skills

We are seeking a detail-oriented Autocad Designer with 1 to 2 years of experience to join our team in Gurgaon, India. The ideal candidate will have a strong foundation in design principles and be proficient in AutoCAD software.nnKey Responsibilities:nn- Create Technical Drawings: Develop accurate and detailed technical drawings based on project specifications and requirements, ensuring that all designs meet industry standards.n n- Collaborate with Team Members: Work closely with architects, engineers, and project managers to understand project needs and incorporate feedback into designs.n n- Revise Drawings: Update and modify existing drawings as necessary, making sure all design changes are accurately reflected in the final documents.nn- Maintain Documentation: Organize and maintain drawings and related documentation, ensuring easy access and compliance with project guidelines.nnRequired Skills and Expectations:nnCandidates must possess a graduate degree and have experience in using AutoCAD software effectively. Strong attention to detail and an ability to interpret sketches, drawings, and specifications are essential. Effective communication skills are required, as the role involves collaboration with various team members. The applicant should be capable of working in a fast-paced environment and meet deadlines consistently. A proactive approach to problem-solving and a passion for design will set candidates apart in this role.n> B *OQ & AutoCAD Designer - Gurgaon*nnLocation: GurgaonnPosition: BOQ & AutoCAD DesignernExperience: 1-3 Yearsnn *Key Responsibilities*nn* Prepare accurate BOQs (Bill of Quantities) based on project drawings, lighting layouts, and project requirements.n* Prepare and modify 2D AutoCAD drawings, particularly for lighting, electrical, and architectural applications.n* Read and interpret architectural, lighting design, electrical, and technical drawings.n* Prepare detailed quantity take-offs, lighting schedules, and material calculations.n* Coordinate with the Project, Design, Lighting, Procurement, and Site teams for project requirements.n* Prepare shop drawings, lighting layouts, installation drawings, and detailed project drawings.n* Ensure BOQs and drawings are accurate and updated according to project revisions.n* Coordinate with vendors and internal teams regarding lighting products, specifications, quantities, and technical requirements.n* Maintain proper documentation of drawings, BOQs, lighting schedules, and project-related data.n* Support the team in project estimation, costing, and material planning.n* Review drawings and BOQs to identify quantity discrepancies, design changes, and material requirements.n* Assist in preparing lighting-related technical documentation and product details as required.nn *Requirements*nn* Strong knowledge of AutoCAD is mandatory.n* Prior experience or good working knowledge of the Lighting Industry is mandatory/preferred.n* Candidates with experience in lighting design, lighting projects, electrical/lighting products, architectural lighting, or lighting execution will be preferred.n* Good understanding of BOQ preparation, quantity estimation, and material take-offs.n* Ability to read and understand lighting, electrical, architectural, and technical drawings.n* Basic understanding of lighting fixtures, lighting layouts, specifications, and installation requirements.n* Good knowledge of MS Excel and MS Office.n* Strong attention to detail and accuracy.n* Good communication and coordination skills.n* Candidates from lighting, electrical, architecture, interior, construction, or related industries will be preferred.nn *Preferred Candidate Profile*nnCandidates who have worked on lighting projects and have hands-on experience in AutoCAD + BOQ + lighting layouts/quantities will be given preference.

We are looking for a skilled and detail-oriented Design Engineer to develop and prepare designs, shop drawings, fabrication drawings, and technical documentation for modular panels, cleanroom panels, partitions, ceilings, doors, and allied engineering products. The candidate will work closely with the Project, Production, Quality, Purchase, and Installation teams to ensure that designs are technically accurate, manufacturable, cost-effective, and meet customer/project requirements. Candidates with experience in modular panel design, sheet-metal fabrication, cleanroom systems, doors, or similar engineering products will be preferred. Key Responsibilities Design & Engineering Prepare detailed 2D and 3D designs for modular panels, partitions, ceilings, doors, and related components. Develop fabrication and shop drawings based on customer requirements, architectural drawings, BOQs, and project specifications. Prepare panel layouts, assembly drawings, sections, elevations, details, and installation drawings. Design panel joints, profiles, trims, flashings, frames, hardware, and other associated components. Ensure designs are suitable for manufacturing, installation, and maintenance. Review designs for functionality, dimensional accuracy, material optimization, and ease of fabrication. Cleanroom & Modular Panel Design Develop designs for different types of modular cleanroom panels and systems. Prepare layouts for walls, ceilings, partitions, doors, windows, covings, and accessories. Understand requirements related to panel thickness, core materials, skins, profiles, joints, and finishes. Coordinate design requirements for cleanroom doors, vision panels, pass boxes, and other allied products where applicable. Ensure designs meet project specifications and customer requirements. Engineering Drawings & Documentation Prepare detailed GA drawings, fabrication drawings, assembly drawings, and installation drawings. Prepare Bill of Materials (BOM), cutting lists, material specifications, and quantity take-offs. Maintain proper revision control and ensure updated drawings are issued to relevant departments. Incorporate customer comments and engineering changes into drawings. Prepare technical documentation required for production and project execution. Coordination Coordinate with Project, Production, Purchase, Quality, and Installation teams for smooth execution. Discuss design requirements and technical issues with customers, consultants, and project teams when required. Work with production teams to resolve fabrication-related design issues. Visit manufacturing facilities or project sites when required to understand and resolve technical issues. Provide technical support during manufacturing and installation. Design Optimization Identify opportunities for material optimization, cost reduction, standardization, and design improvement. Develop standardized designs and components for repetitive products. Reduce fabrication complexity, material wastage, and installation time. Ensure designs are practical and economical without compromising quality. Quality & Compliance Ensure drawings comply with approved specifications, tolerances, and applicable standards. Verify critical dimensions, interfaces, and installation requirements before releasing drawings. Support Quality and Production teams in resolving drawing-related nonconformities. Maintain accurate engineering records and revision history. Required Qualifications Diploma / Bachelor's degree in Mechanical Engineering, Production Engineering, Civil Engineering, or a related discipline. 2-6 years of relevant design experience, preferably in modular panels, cleanrooms, sheet-metal fabrication, doors, partitions, or allied engineering products. Strong ability to read and interpret engineering and architectural drawings. Software Skills Proficiency in one or more of the following: AutoCAD - mandatory SolidWorks / Inventor / Creo - preferred MS Excel ERP / BOM management systems - advantageous Preferred Technical Knowledge Sheet-metal design and fabrication Modular panel construction Cleanroom panel systems Door and frame design Press brake bending and fabrication Laser cutting / CNC punching Welding and assembly Material selection and thickness Hardware and fastening systems GD&T and engineering tolerances BOM and quantity estimation Key Skills 2D & 3D Design AutoCAD Modular Panel Design Sheet Metal Design Engineering Drawing Shop/Fabrication Drawings BOM Preparation Design Calculations Material Optimization Problem Solving Attention to Detail Cross-functional Coordination Key Performance Indicators (KPIs) Accuracy of engineering drawings On-time completion of design deliverables Design-related production errors Drawing revision frequency Material optimization / wastage reduction Timely resolution of technical issues Compliance with customer/project specifications Standardization and design improvement initiatives Candidate Profile The ideal candidate should be a hands-on Design Engineer with strong practical knowledge of modular panel and/or sheet-metal product design. The candidate should be able to independently convert project requirements into accurate, manufacturing-friendly designs and detailed fabrication drawings, while effectively coordinating with production and project teams. Experience in modular cleanroom panels, cleanroom doors, partitions, ceilings, sheet-metal products, or allied engineering products will be preferred.

We are seeking a skilled Auto CAD Designer to join our team in Faridabad. The ideal candidate will hold a Bachelor of Engineering degree and possess 5 to 10 years of relevant experience in design and drafting.Key Responsibilities:- Create Detailed Drawings: Prepare accurate and detailed technical drawings using AutoCAD software based on project specifications and requirements.- Collaborate with Engineers: Work closely with engineering teams to develop design solutions that meet project goals and standards.- Revise Drawings: Update and modify existing designs as needed to incorporate changes and improvements while ensuring compliance with regulations.- Maintain Project Documentation: Ensure all design documents are organized, up-to-date, and easily accessible for team members and stakeholders.- Quality Assurance: Perform checks to guarantee the accuracy and quality of all drawings produced, focusing on precision and adherence to guidelines.Required Skills and Expectations:Candidates must have strong proficiency in AutoCAD and a solid understanding of design principles specific to engineering. The ability to interpret and understand technical specifications and blueprints is essential. Strong communication skills are necessary for effective collaboration with team members and other departments. Attention to detail is crucial to maintain accuracy in all designs. The role requires a male candidate who is willing to work full-time from the office.

The Mechanical Fitter role involves essential tasks related to structural fabrication, piping, and mechanical equipment installation. This position is suitable for male candidates with a diploma and 1-2 years of experience.Key responsibilities include:- Structural Fabrication and Installation: The candidate will create and assemble structures based on engineering specifications, ensuring they meet quality standards.- Piping Installation and Fit-up: The role requires fitting and installing piping systems for various applications, including alignment and securing pipes.- Pump Installation and Fit-up: This includes installing and aligning mechanical pumps, ensuring they operate efficiently within specified parameters.- Mechanical Equipment Installation: The fitter will install and commission various mechanical equipment, ensuring all installations are safe and functional.Candidates are expected to have practical skills in machinery and tools related to mechanical fitting. Strong problem-solving abilities and attention to detail are essential. Physical fitness is necessary to handle the demands of the job, which may include lifting and working in various environments. This is a full-time position, and the work will be performed from home. However, candidates should be prepared for potential fieldwork or travel related to installation tasks. A valid driver's license is required, and candidates must be able to follow safety guidelines and regulations while performing their duties. Overall, this role demands a hands-on approach to mechanical work with a focus on quality and efficiency.

Maintenance engineers work involves checking, repairing and servicing machinery, equipment, systems and infrastructures. Maintenance engineers ensure that industrial machinery and equipment runs smoothlyExperience0 - 9 YearsNo. of Openings50EducationAny Bachelor Degree, Post Graduate DiplomaRoleMechanical Maintenance EngineerIndustry TypeEngineering / Cement / MetalsGender[ Male / Female ]Type of JobFull TimeWork Location TypeWork from Office

Own the design and production department end-to-end - from concept and design through prototyping, vendor development, production ramp-up, and quality release. Design and detail mechanical components and enclosures (e.g., die-cast housings, EV powertrainadjacent parts) using CAD, with a strong focus on Design for Manufacturing (DFM) and Design for Assembly (DFA). Identify, evaluate, and onboard new vendors and suppliers (die-casting, CNC machining, sheet metal, tooling, electronics assembly, etc.), and build a reliable, cost-effective vendor base for the company. Work closely with vendors on tooling, sampling, first-article inspection, and production readiness; negotiate cost, lead time, and quality terms. Partner closely with the Production team to plan, set up, and run manufacturing/assembly processes, and to troubleshoot issues on the shop floor. Partner closely with the Quality team to define inspection standards, resolve non-conformances, and drive continuous improvement in yield and reliability. Prepare and maintain drawings, BOMs, specifications, and SOPs for components, sub-assemblies, and the final product.Support prototyping and testing of new components and design iterations in coordination with the technical/patent team. Track production costs, vendor performance, and quality metrics, and report status regularly to the founder/management. Help build the design and production function from the ground up - processes, documentation, and (over time) a small team - as the company scales

We are looking for a Machine Shop Supervisor to oversee operations in our workshop. The ideal candidate will ensure that all processes run smoothly and efficiently while managing the team. Key Responsibilities:- Supervise Daily Operations: Oversee the daily activities in the machine shop to ensure production goals are met and quality standards are maintained.- Manage Team Performance: Lead and support shop personnel, providing guidance and training to enhance skills and efficiency.- Quality Control: Implement and enforce quality checks to ensure all finished products meet the required specifications and standards.- Maintain Equipment: Ensure that all machinery is well-maintained and safe to operate, coordinating repairs and service schedules as necessary.- Inventory Management: Monitor inventory levels of materials and tools, placing orders as needed to ensure continuous operations without delays.- Safety Compliance: Promote a safe working environment by ensuring all team members adhere to safety regulations and best practices.Required Skills and Expectations:Candidates should have a diploma in a relevant field and demonstrate a strong understanding of machining processes. Attention to detail is critical, along with problem-solving skills to address any challenges that arise in production. Effective communication abilities are essential for leading the team and coordinating with different departments. The candidate must also be able to work full-time in our Thiruvallur office, and we require male candidates for this role. A proactive attitude towards continuous improvement will be highly valued.

We are looking for a Design Engineer with 3 years of experience to join our team. This role is fully remote, allowing flexibility while contributing to innovative design solutions. A diploma in engineering is required for this position.Key Responsibilities:1. Design Development: Create detailed designs and specifications for various projects, ensuring they meet the necessary standards and requirements.2. Collaboration: Work closely with other engineers and team members to ensure designs are feasible and align with project goals.3. Software Proficiency: Utilize design software to produce and modify design documents, making sure to incorporate feedback and suggestions from the team.4. Quality Assurance: Conduct reviews of designs and models to maintain quality and accuracy throughout the project lifecycle.5. Problem-Solving: Address design challenges by proposing practical solutions to enhance functionality and efficiency.Required Skills and Expectations:Candidates should possess strong analytical and problem-solving skills, enabling them to tackle design issues effectively. Proficiency in design software is essential, as well as a solid understanding of engineering principles. Effective communication skills are vital for collaborating with team members and presenting design concepts clearly. We expect a proactive attitude and a commitment to delivering high-quality work within deadlines.

Hiring for 1 Mechanical Design Engineer Job in Mohali, with minimum 1 Year Experience,Required Educational Qualification is : B.E, B.Tech, M.Tech with Good knowledge in Autocad, Mechanical Design, Mechanical Designer, Technical Skills, Sheet Metal Design, AutoCAD Mechanical etc.

Key Responsibilities & DutiesTechnical Support & Operational Execution:Assist senior engineers in day-to-day shop-floor manufacturing, site operations, machinery setup, or chemical process monitoring.Prepare and update basic technical documentation, standard operating procedures (SOPs), production logbooks, and inspection reports.Perform quality checks, dimensional measurements using precision instruments (verniers, micrometers, gauges), or raw material sampling.Design, Drafting & Process Monitoring:Support engineering teams with basic 2D drafting, 3D CAD modeling updates, Bill of Materials (BOM) creation, or process flowcharts under supervision.Monitor equipment performance, record operational parameters, and report line breakdowns or process deviations promptly.Quality Control & Preventive Maintenance:Participate in 5S maintenance, Root Cause Analysis (RCA), and quality defect logging (8D/Kaizen activities).Assist maintenance personnel in carrying out routine preventive maintenance schedules for machines, tooling, or plant utilities.Safety & Compliance:Strictly follow plant safety guidelines, personal protective equipment (PPE) protocols, and environmental health and safety (EHS) policies.Attend all assigned technical training modules, safety drills, and skill development workshops.

As a Mechanical Fitter, your primary focus will be on performing mechanical fitting, assembly, and installation tasks. You will work in the office located in Sriperumbudur, Kanchipuram, and are expected to have 2 to 3 years of experience, as well as a diploma in a relevant field.Your key responsibilities will include reading and interpreting mechanical drawings and measurements accurately. You will fabricate, cut, drill, grind, and weld various structural and mechanical components necessary for assembly. Additionally, you will carry out maintenance and repair activities on equipment to ensure it operates efficiently.To succeed in this role, you should possess strong skills in mechanical fitting and assembly processes. A clear understanding of mechanical drawings is essential, as is proficiency in using fabrication tools such as drills, grinders, and welding equipment. Attention to detail is crucial to ensure that all components are fitted correctly and meet safety standards. You will need to be comfortable working full time from the office and will not be required to travel outside this location. A good understanding of basic computer skills may be advantageous. The role is open to male candidates only, in accordance with company policy. If you meet these requirements and are eager to contribute to a dynamic team, we encourage you to apply.