ISO Documentation Jobs

Key Responsibilities Ensure incoming raw materials, components, and vendor-supplied parts meet company quality requirements, engineering specifications, and applicable statutory standards. Coordinate with the Purchase Department for supplier selection, evaluation, approval, and performance monitoring. Conduct supplier audits and implement corrective and preventive actions to improve supplier quality. Manage Incoming Quality Control (IQC), inspection activities, and supplier rejection analysis. Work closely with Engineering and NPD teams for new product development, supplier approval, and quality planning. Analyze supplier-related quality issues and conduct Root Cause Analysis (RCA). Implement corrective and preventive actions (CAPA) and monitor their effectiveness. Review and approve supplier quality documents, including PPAP submissions, Control Plans, PFMEA, and inspection reports. Monitor supplier performance using quality KPIs such as rejection rate, PPM, and supplier defect trends. Drive continuous improvement initiatives to reduce defects, rejections, and quality-related costs.Required Technical SkillsCandidates should have practical knowledge of the following quality tools and techniques: APQP - Advanced Product Quality Planning PPAP - Production Part Approval Process PFMEA - Process Failure Mode and Effects Analysis Control Plan preparation and implementation MSA - Measurement System Analysis 8D Problem Solving and Root Cause Analysis CAPA - Corrective and Preventive Action SPC - Statistical Process Control Process Capability Analysis - Cp and Cpk Knowledge of measuring instruments and inspection techniques Supplier audits, IQC, and quality documentationRequired Qualifications Diploma or Bachelor's degree in Mechanical Engineering, Production Engineering, or a relevant technical field. 3-5 years of relevant experience in Supplier Quality Assurance, Supplier Quality Engineering, or Incoming Quality Control. Strong analytical, problem-solving, communication, and coordination skills. Hands-on experience in supplier quality improvement and quality management systems.

Key ResponsibilitiesQuality Assurance & Control (QA/QC)Process Inspection & Auditing: Monitor production processes, assembly lines, and machining stages to ensure compliance with engineering drawings, quality plans, and standard operating procedures (SOPs).Incoming & In-Process Inspection: Oversee raw material inspections, first-article inspections (FAI), in-process checks, and final pre-dispatch quality clearances.Testing & Calibration: Supervise dimensional, metallurgical, and functional testing of components using precision measuring instruments (e.g., Vernier calipers, micrometers, height gauges, CMM). Ensure regular calibration of all measuring equipment.Defect Management & Continuous ImprovementRoot Cause Analysis: Investigate internal rejections, customer complaints, and supplier quality failures using root cause problem-solving methodologies (e.g., 5-Why, Fishbone/Ishikawa diagram, Pareto analysis).Corrective & Preventive Actions (CAPA): Develop, implement, and track effective CAPA plans to eliminate recurring defects and prevent non-conformances.Process Optimization: Collaborate with production, tooling, and engineering teams to optimize manufacturing processes, reduce scrap rates, and improve overall product reliability.Documentation & ComplianceQuality Documentation: Maintain comprehensive quality records, Inspection Reports (IR), Material Test Certificates (MTC), and Process Flow Diagrams.Audits & Standards: Maintain compliance with ISO standards (e.g., ISO 9001, IATF 16949); actively participate in internal and external client/third-party quality audits.

As a Quality Engineer, you will play a vital role in ensuring the standards and quality of our products. Your responsibilities will include conducting quality inspections, handling various instruments for measurement such as verniers, micrometers, and hide gauges, and carrying out visual inspections during all stages of the production processthis includes in-process inspections and final inspections. You will also manage the documentation associated with inspections, maintain accurate reporting for material inputs and outputs, and ensure precise measurements in all testing procedures.To succeed in this role, you should possess strong attention to detail and hands-on experience with inspection and testing tools. A postgraduate degree is required, alongside 2 to 5 years of relevant experience in quality engineering. You must be comfortable working from the office location in Nashik and should demonstrate a proactive approach to identify and resolve quality issues.Key skills necessary for this position include proficiency in quality inspection methodologies, effective documentation practices, and a thorough understanding of testing instruments and measurement standards. You will also need to be physically capable of handling equipment and maintaining focus throughout rigorous inspection routines.This role is structured for full-time commitment, working standard hours from Monday to Saturday. Flexibility and adaptability are encouraged as you will play a key part in upholding our commitment to product quality and reliability.

As a Quality Engineer, you will focus on maintaining high-quality standards in the manufacturing process and overseeing incoming quality assessments. Key responsibilities include monitoring and evaluating processes to ensure compliance with quality specifications. You will assist in identifying issues, conducting root cause analyses, and implementing corrective actions to improve product quality. Regularly inspecting incoming materials and parts will also be part of your duties, ensuring that they meet established quality standards before they are used in production. To succeed in this role, you should possess a strong understanding of quality control processes and techniques. A diploma or equivalent from an ITI is required, and candidates should have 1 to 2 years of relevant experience in quality assurance. Effective communication skills are essential for collaborating with team members and reporting quality issues. This position requires you to work on-site in Chakan, Pune, and you should be prepared for fieldwork, which may include inspections and audits at various locations. As a full-time role, standard working hours will apply, along with designated weekly offs. Immediate joiners are encouraged to apply, as the department seeks candidates who can quickly adapt to the team. This opportunity allows you to actively contribute to a culture of quality and continuous improvement within the organization.

We are seeking an experienced Quality Manager to ensure our products meet high-quality standards in Coimbatore, India. The ideal candidate will have 6 to 12 years of experience and a background in quality management.Key Responsibilities:1. Quality Assurance Oversight: Develop and implement quality assurance policies and procedures to maintain product quality throughout the production process.2. Team Leadership: Lead and mentor a team of quality assurance professionals, providing guidance and support to enhance their skills and performance.3. Data Analysis: Analyze quality data to identify trends, areas for improvement, and potential risks, enabling informed decision-making for better quality outcomes.4. Compliance Management: Ensure compliance with industry standards and regulatory requirements, conducting regular audits and inspections to assess adherence.5. Customer Liaison: Collaborate with customers to address quality-related issues and implement corrective actions as needed, ensuring customer satisfaction remains a priority.Required Skills and Expectations:The ideal candidate should have a degree and several years of experience in quality management. Strong leadership and communication skills are essential for collaborating with various teams. A detail-oriented mindset and analytical skills are necessary for data analysis. The candidate should be proactive in problem-solving and capable of driving quality improvement initiatives. Experience with quality management systems and familiarity with quality assurance tools is advantageous. The position requires working in an office environment, and male candidates are preferred for this role.

We are seeking a dedicated QMS Engineer with 1 to 3 years of experience to join our team in Daman, India. The ideal candidate will play a crucial role in ensuring our Quality Management System (QMS) meets industry standards and enhances product quality.Key Responsibilities: - Develop and Maintain QMS Documentation: Create and update quality manuals, procedures, and work instructions to align with regulatory requirements and internal policies. - Conduct Internal Audits: Plan and execute regular internal audits to assess compliance with QMS standards and identify areas for improvement. - Quality Training: Organize training sessions for employees on quality management practices and the importance of adhering to QMS standards. - Data Analysis and Reporting: Analyze quality-related data and prepare reports to monitor performance metrics, identifying trends and root causes of quality issues. - Collaboration with Teams: Work closely with various departments to ensure effective implementation of QMS policies and drive continuous improvement initiatives.Required Skills and Expectations: Candidates should have a diploma in a relevant field and a strong understanding of quality management principles. Proficiency in using quality tools and techniques, such as root cause analysis and corrective action methodologies, is essential. Excellent communication and teamwork skills are necessary, as the role involves collaborating with diverse teams. Attention to detail and a proactive approach to problem-solving are critical to succeeding in this role. The ability to adapt to changing environments and learn quickly will be highly valued.

Key Responsibilities:Raw & Packaging Material Quality: Inspect incoming durum wheat semolina, water, additives, and packaging materials to ensure they match internal standards .In-Process Quality Control (IPQC): Monitor critical control points during mixing, extrusion, drying, and cooling (e.g., moisture content, cooking time, breaking rate, and strand uniformity).Food Safety & Compliance: Maintain systems like HACCP, GMP, GHP, and ISO 22000 / FSSC 22000, ensuring complete alignment with local food authorities. Finished Goods Release: Conduct physical, visual, and analytical testing on finished pasta before approving batches for market dispatch .Audits & Documentation: Lead internal/external quality audits, maintain accurate lab records, and manage traceability documentation. Team Leadership & Training: Supervise shift quality controllers and lab analysts, providing continuous training on safety, hygiene, and testing protocols.

As a Senior Quality Engineer, you will play a crucial role in ensuring that products meet high standards of quality and reliability. Your work will involve various tasks that contribute to the overall quality assurance process.Key Responsibilities:- Developing Quality Standards: Create and maintain quality benchmarks in line with industry best practices to ensure all products meet specified requirements. - Conducting Inspections: Perform regular inspections and audits of processes and products to identify areas for improvement and compliance. - Test Planning and Execution: Design and execute test plans, including functional, performance, and regression tests, to validate product quality and performance. - Issue Tracking and Reporting: Identify defects and issues, document them, and report to relevant teams for resolution while ensuring timely follow-up. - Collaboration with Teams: Work closely with cross-functional teams, including production and development, to promote quality awareness and implement best practices. - Continuous Improvement: Drive initiatives for continuous quality improvement by analyzing data and implementing solutions to enhance processes.Required Skills and Expectations:The ideal candidate should have 5 to 11 years of experience in quality engineering, with a strong background in quality assurance methodologies. A diploma in engineering or a related field is essential. You should possess excellent analytical skills, attention to detail, and an understanding of quality standards such as ISO and Six Sigma. Strong communication and collaboration abilities are necessary to work effectively in a team environment. Proficiency in using quality management software and tools is also expected.

We are hiring for the position of Assistant Manager Q.AMinimum 8+ Years of experience in Engineering CompanyStrong knowledge of Quality Management Systems (QMS), IATF 16949 & ISO 9001.Experience in supplier quality and in-process quality management.Expertise in quality tools, audits, and root cause analysiTo carry out routine Inspection on the final product and record in the registerTo suggest the modification/improvement in the manufacturing process and fixtures.To carry out analysis of defects on daily / monthly basis, record and follow-up corrective actions.To submit basic data to Manager Quality at desired frequency and to get involved inTo effectively participate in internal complaints corrective & preventive actions.To control line rejection and take effective measures to control cost of poor quality.store all process inspection documents, gauges, Inspection instruments & quality records, systematically to ensure easy traceability.Qualification- D.M.E / B.E- Mechanical

We are seeking a dedicated QA QC Executive to join our team in Nalagarh. The ideal candidate will have 1 to 4 years of experience in quality assurance and control within a manufacturing or production environment.Key Responsibilities:- Quality Audits: Conduct regular quality audits to ensure compliance with company standards and regulatory requirements. This involves evaluating processes and identifying areas for improvement.- Inspection of Raw Materials: Analyze and inspect incoming raw materials for quality and conformity to specifications. This step is crucial to ensure that only the best materials are used in production.- Testing Products: Perform tests on finished products to verify they meet quality standards and specifications. This includes both visual inspections and functional testing.- Documentation: Maintain accurate records of quality inspections, test results, and corrective actions taken. Clear documentation helps in tracking improvements and ensuring accountability.- Collaboration with Teams: Work closely with production and engineering teams to address quality issues and implement corrective actions. Strong communication ensures everyone is aligned on quality goals.Required Skills and Expectations:Candidates must demonstrate strong attention to detail and analytical skills to identify defects and non-conformities effectively. Proficient knowledge of quality assurance methodologies and tools is essential. The ability to work well in a team environment and communicate findings clearly is necessary. A proactive approach to problem-solving and a strong commitment to maintaining high-quality standards are expected.

Required Executive HR (Fabrication Industry)Name of the Plant : Poshs Cinoti Pvt Ltd. ( Form Work Fabrication & Permanent Structure )Plant Address :GAT NO.832,836,838,864,865,866, Asawali,Taluka-Khandala, Dist-Satara, MaharashtraQualification : MBA - HR / M.P.M / MSWJob Description :1)Recruitment & Resourcing2)Statutory Compliance under applicable labour laws3)Training & Development ( Staff & off roll labours )4)Ensure KRA updation on Google sheet by HODs.5)Performance Management system 6)Employee Engagement Activities7)Contract Labour Administration8)QMS documentation 9)Salary & Wage Administration ( Should familier with Salary software )Experience : 3 to 5 years in Fabrication Industry Salary Range : CTC 03.00 to 04.00 Lac / YearDhanaji Deshmukh Plant HR Manager

We have urgent requirement in Waluj midc Quality Engineer Having minimum 1-5yrs experience in Auto arts manufacturing company Quality documentation knowledge Audit ,QMS Quality Inprocess Quality Inword Outword suppliers etc Candidate should be Diploma BE mech Job location Waluj midc Interested candidate apply on whatsapp or mail resume Interview Start Thanks Job Placement & Services

As a Quality Engineer, you will play a crucial role in ensuring the quality and reliability of our products. You will be responsible for developing and implementing quality control processes to meet our high standards.Key Responsibilities:- Quality Assurance Testing: Conduct thorough tests on products to identify any defects and ensure they meet quality standards. This helps ensure only the best products are delivered to customers.- Process Development: Create and improve quality control processes and procedures. This ensures that every product is consistently produced at the highest quality.- Root Cause Analysis: Investigate and analyze defects or failures in products to identify their root causes. Understanding these causes allows for better prevention strategies in the future.- Documentation: Maintain clear and detailed documentation of quality issues and test results. This documentation is essential for tracking improvements and ensuring accountability.- Collaboration: Work closely with production teams and other departments to address quality concerns and improve overall product quality. Cooperation is key to maintaining high-quality standards.Required Skills and Expectations:- Educational Background: A Bachelor of Engineering (B.E) degree is required, providing a solid foundation in technical principles.- Experience: Candidates should have 3 to 6 years of relevant experience in quality engineering.- Analytical Skills: Strong analytical skills are essential for assessing product quality and identifying areas for improvement.- Attention to Detail: A keen eye for detail is important to find and address issues that could affect product quality.- Technical Proficiency: Familiarity with quality control tools and techniques, as well as industry standards, is expected.- Communication Skills: Excellent communication skills are necessary to effectively report findings and collaborate with cross-functional teams.

Purpose of Job :- As a Quality Engineer at Techno Control, you will play a critical role in ensuring the quality and reliability of our products and services. You will work closely with cross-functional teams to implement quality assurance processes, conduct inspections and tests, and drive continuous improvement initiatives to enhance product quality and customer satisfaction.

We Are Urgent Opening For Quality Engineer - Fresher- Mnc CompanyQms & Mr-Systems & Control Inward& In Process Quality SqaCustomer Quality & Audits Iatf & DocumentationPre-Dispatch Inspection Client Mgmt Vendors Audit & SystemCustomer Complaints HandlingQualification- Diploma / B.E- MechanicalContact Person- Deepak - 7757087059

JOB DESCRIPTION - SUPPLIER QUALITY ENGINEER (SQE)Position: Supplier Quality EngineerNumber of Vacancies: 03Job Locations: Bhiwadi Rajasthan, IMT Manesar, and NoidaExperience: 3-6 YearsSalary Range: 30,000 - 60,000 per monthIndustry: Manufacturing / Automotive KEY RESPONSIBILITIES Evaluate, qualify, and monitor suppliers to ensure compliance with company quality standards and technical specifications. Conduct supplier quality audits, process audits, and periodic supplier performance assessments. Monitor incoming raw materials, components, and parts to ensure conformity with approved specifications. Investigate supplier-related quality issues and implement effective corrective and preventive actions (CAPA). Perform root cause analysis using methodologies such as 5 Why Analysis, Fishbone Diagram, and 8D Problem Solving. Manage supplier complaints, rejection analysis, non-conformance reports (NCRs), and corrective action follow-ups. Review and validate PPAP documentation, FMEA, Control Plans, and other relevant quality documents, as applicable. Coordinate with Production, Purchase, Quality Assurance, and Engineering teams to resolve supplier quality concerns. Monitor supplier quality KPIs, including PPM, rejection rates, defect trends, and corrective action closure timelines. Drive continuous improvement initiatives to reduce defects, improve supplier reliability, and minimize quality-related costs. Ensure compliance with applicable ISO 9001, IATF 16949, and customer-specific quality requirements, wherever applicable.QUALIFICATION & REQUIRED SKILLS Diploma / B.E. / B.Tech in Mechanical, Production, Automobile, or a related engineering discipline. 3-5 years of relevant experience in Supplier Quality / Vendor Quality / Quality Assurance. Strong knowledge of supplier audits, incoming inspection, and quality management tools, including APQP, PPAP, FMEA, MSA, SPC, and 8D. Good analytical, problem-solving, documentation, and supplier coordination skills. Good English communication skills for professional reporting and supplier correspondence.

Key Responsibilities Conduct incoming, in-process, and final inspections of automotive components. Verify dimensions as per engineering drawings and specifications. Identify defects, analyze root causes, and implement corrective and preventive actions. Monitor manufacturing processes and reduce rejection rates. Maintain inspection reports, quality records, and calibration documents. Coordinate with production teams to resolve quality-related issues.Technical Skills & Measuring Instruments Measuring Instruments: Vernier Caliper, Micrometer, Height Gauge, Dial Gauge, Bore Gauge, and Feeler Gauge. Quality Tools: 7 QC Tools, 5 Why Analysis, Fishbone Diagram, RCA, CAPA, and SPC. Quality Documents: Inspection Reports, Control Plan, PFMEA, SOPs, NCR, 8D Reports, FAI, and Calibration Records. Good knowledge of engineering drawings, GD&T, tolerances, and dimensional inspection.Educational QualificationDiploma or Bachelor's Degree in Mechanical Engineering, Automobile Engineering, or a relevant technical field.Candidate Requirements 3-5 years of relevant experience, preferably in automobile manufacturing. Practical knowledge of precision measuring instruments and quality documentation. Strong analytical and problem-solving skills. Knowledge of ISO 9001 / IATF 16949 will be an advantage.

Required Quality Engineer (Fabrication Industry)Name of the Plant : Poshs Cinoti Pvt Ltd. ( Form Work Fabrication & Permanent Structure )Plant Address :GAT NO.832,836,838,864,865,866, Asawali,Taluka-Khandala, Dist-Satara, Maharashtra A)Fabrication Quality Control & Inspection1)Strong knowledge of bending, cutting, rolling, welding inspectionAbility to read and interpret fabrication drawings & specifications2)ISO 9001 Quality Management System3) Hands-on experience in ISO 9001 documentation, implementation & audits4) Knowledge of quality manuals, SOPs, CAPA, and quality plans5) Problem Solving & PCM / CAPA Handling6) Experience in in-house and customer PCM (Problem Counter Measure)7) Root Cause Analysis (RCA), corrective & preventive actions8) Quality Documentation & Record Maintenance9) Maintaining inspection reports, calibration records, rejection analysisStatistical quality data recording & reportingB)Supplier & Incoming Material Quality Control01)Defining raw material quality requirements02)Inspection & testing of incoming/bought-out materials03) Process Monitoring & Continuous ImprovementC)Monitoring manufacturing processes for quality compliance01)Reducing rejection levels through continuous improvement initiativesD)Auto CAD & Technical Coordination01)AutoCAD knowledge for understanding drawings02)Coordination with production, logistics & customers for quality complianceExperience : 3 to 5 years in Fabrication Industry Salary Range : CTC 03.00 to 5.00 Lac / YearSend resume on : plntmgrhr01@poshscinoti.com or whats app on 9960300915Dhanaji Deshmukh Plant HR Manager ( 9960300915 )

Key ResponsibilitiesDevelop, implement, and maintain quality control processes and procedures.Monitor manufacturing processes to ensure compliance with quality standards.Conduct incoming, in-process, and final product inspections.Investigate quality issues, identify root causes, and implement corrective and preventive actions (CAPA).Analyze quality data and prepare reports on key quality metrics.Coordinate internal audits and support external/customer audits.Ensure compliance with ISO 9001, IATF 16949, GMP, or other applicable quality standards.Work closely with production, maintenance, and design teams to resolve quality concerns.Manage customer complaints and support quality improvement projects.Train employees on quality standards, procedures, and best practices.