Instrumentation Jobs

Diploma/BE Instrumentation-for Calibration-Nashik Candidates RequiredInstrumentation operation Executive Femalefreshers/experiencedcommunication/email & Computer Excel/ Instrumentation / Calibration KnowledgeSal-15 KNashik

Apply under Opportunity Card Germany visaGov. announced visaFamily visaWork and settle in GermanyFree education and medical facilities for familyCandidate is eligible to work in GermanyChild tax benefits givenPension plan givenUnemployment wages givenSalary equal to citizen of GermanyAll post landing services will be guided before landing GermanyCandidate will enjoy dual citizenship

Urgent OpeningInstrumentation Operation TechnicianJob Location: Bharuch -GujaratQualification: Industrial Training Institute (ITI)Experience: 3-5 yearsJob Description:Installation and Calibration: Oversee the installation, configuration, and calibration of field instruments and deviceTemperature Transmitter (TT) ,Pressure Transmitter (PT),Flow Meter ,Pressure GaugeRotameter ,Level Transmitter (LT) , Level Indicators (LI) , Control Valve (CV)Pressure Reducing Station (PRS) , Flame Arrestor FATroubleshooting and Maintenance: Identify and resolve technical issues related to instrumentation systems, including troubleshooting faulty devices, diagnosing measurement inaccuracies, and implementing corrective actionsCalibrate the field instruments periodically as per pre-defined schedules under the supervision of Supervisor/EngineerEnsure inputs to plant person or superiors & contribute to prevent incident / accident in plant or shop floorEnsure cable terminate/gland and reliable power source to instruments systemsFill calibration report, checklist, daily log sheet etc.Accountable & responsible for the deviations due to instrument failureContribute in management of spares inventory along with collection/deposition at storesTo check the healthiness & carry out calibration of instruments installed at location.To perform scheduled maintenance jobs of Instrumentation and Control system.To maintain good housekeeping of the plant and instrument workshop.To maintain the inventory of the general consumables and critical spares in coordination with store in charge.

Experienced Motor Winder required for winding, rewinding, repairing, and maintaining electric motors, generators, and rotating electrical equipment to ensure efficient and reliable operation.Key Responsibilities:Inspect and diagnose motor faults.Remove damaged windings and rewind stators/rotors as per specifications.Perform coil winding, insulation, lacing, varnishing, and baking.Replace bearings and carry out motor assembly.Maintain quality standards and follow safety procedures.Conduct electrical tests such as IR, continuity, and performance tests (preferable).

We are looking for a dedicated Construction Worker with 3 to 7 years of experience to join our team in Thailand. The ideal candidate should possess a strong work ethic and be committed to delivering high-quality results.**Key Responsibilities:**- **Site Preparation:** Ensure the construction site is ready for work by clearing debris, setting up equipment, and laying out safety cones and signage.- **Material Handling:** Move and organize materials as needed, ensuring they are in the right place for construction processes. This includes lifting heavy items and properly storing them.- **Assisting with Construction Tasks:** Work closely with experienced workers and supervisors to assist in tasks such as mixing concrete, pouring foundations, and framing structures.- **Maintaining Equipment:** Regularly check and maintain construction tools and machinery to ensure they are in safe and working condition, reporting any issues to supervisors.- **Adhering to Safety Protocols:** Follow safety procedures diligently to prevent accidents on the construction site, which includes wearing protective gear and keeping the work environment tidy.**Required Skills and Expectations:**- A minimum of 3 years of experience in construction or a related field.- Educational background in architecture, commerce, engineering, or a relevant advanced diploma is preferred.- Physical fitness is important as this job involves lifting heavy materials and performing manual labor.- Strong teamwork skills to collaborate effectively with other workers and supervisors.- Good communication abilities to understand instructions and report progress or concerns.- A commitment to safety standards and the ability to follow guidelines strictly.

We are looking for a DCS Engineer with 3 to 5 years of experience to join our team in Bangalore. The ideal candidate will be responsible for operating and maintaining Distributed Control Systems (DCS) to ensure optimal performance.**Key Responsibilities:**- **System Maintenance:** Regularly monitor and maintain DCS equipment to ensure all systems are functioning properly. You will perform troubleshooting and repairs to prevent downtime.- **Software Configuration:** Configure DCS software to adapt to operational requirements. This involves updating system settings and implementing necessary changes for improved performance.- **Technical Support:** Provide technical support to resolve issues related to DCS operations. You will assist other team members in troubleshooting and resolving system-related problems.- **Documentation:** Create and maintain detailed documentation of DCS configurations, changes, and maintenance activities. This will help in ensuring accurate records for future reference.- **Collaboration:** Work closely with other engineering teams to integrate DCS with other systems. You will collaborate on projects to improve system efficiency and reliability.**Required Skills and Expectations:**Candidates should have a strong understanding of DCS architecture and protocols. Proficiency in programming languages relevant to DCS systems is required. Experience with troubleshooting and optimizing control systems is essential. Strong analytical skills and attention to detail will help in identifying and resolving issues promptly. Good communication skills are important for effective collaboration with team members and other departments. A proactive approach to problem-solving is also expected.

ROLE OVERVIEWThe Instrumentation & Control Engineer will be responsible for the installation, calibration, maintenance, and optimisation of all measurement and control instruments across the CCL plant. This role is critical to maintaining precise temperature profiles, pressure cycles, and resin curing parameters that directly impact laminate quality.KEY RESPONSIBILITIESInstrumentation Maintenance & Calibration- Maintain, calibrate, and troubleshoot all field instruments: temperature sensors (RTD, thermocouples), pressure transmitters, flow meters, level sensors, and analytical instruments- Ensure all instruments are within calibrated range and traceable to national/international standards- Manage instrument inventory, spare parts, and calibration recordsProcess Control - CCL Specific- Monitor and optimise temperature profiles in press cycles (ramp, cure hold, cool-down phases)- Control and fine-tune pressure cycles during multi-daylight press lamination- Maintain resin curing parameter records and ensure process consistency across batches- Oversee drying oven temperature zones in the treater / impregnation lineControl System Support- Support PLC and DCS/SCADA system for process variable monitoring and alarming- Interface with electrical and automation teams for integrated control loop performance- Participate in new project commissioning: instrument selection, hook-up, loop testing, and start-upDocumentation & Compliance- Maintain as-built instrument index, loop diagrams, and calibration certificates- Support internal and external audits with accurate instrumentation recordsCANDIDATE PROFILEExperience- 4-10 years in instrumentation and process control in a manufacturing environment- Ideal background: continuous process industries - chemicals, laminates, textiles, plastics, or glass- Experience controlling temperature-critical process equipment (ovens, presses, reactors, boilers)Technical Skills- Proficiency with HART, FOUNDATION Fieldbus, or Profibus communication protocols- Hands-on calibration of pressure, temperature, flow, and analytical instruments- Familiarity with DCS systems (Honeywell, ABB, Yokogawa) or advanced PLC-based control- Working knowledge of control loop tuning (PID)Education- Diploma / B.E. / B.Tech in Instrumentation Engineering, Electronics & Instrumentation, or Control EngineeringCritical Requirement: Preferred: Candidates from laminates, textiles, or chemical process industries who understand temperature-sensitive curing environments.REPORTING & LOCATIONReports To Senior Electrical Engineer / Plant HeadLocation - Plant Site, India

We are looking for an Instrument & Control Engineer who will be responsible for designing, developing, and maintaining equipment used for controlling and monitoring engineering systems. The ideal candidate will have a strong background in instrumentation and control systems, with 1 to 7 years of experience.**Key Responsibilities:**- **Design Control Systems:** Develop and design control systems for various engineering processes to ensure efficiency and compliance with industry standards.- **Install and Calibrate Instruments:** Oversee the installation and calibration of instrumentation equipment, ensuring everything functions correctly according to specifications.- **Troubleshooting:** Identify and resolve issues in control systems and instrumentation to maintain operational efficiency and minimize downtime.- **Documentation and Reporting:** Maintain accurate documentation of control systems, including design changes, procedures, and performance reports, facilitating clear communication within the team.- **Collaboration:** Work closely with engineers and technicians across departments to implement control strategies and improve system performance.**Required Skills and Expectations:**Candidates should possess a diploma in engineering, preferably in Instrumentation or related fields, with a minimum of 1 year of relevant experience. Strong analytical and problem-solving skills are essential, along with the ability to work independently and in a team. Familiarity with instrumentation software and tools is crucial. The candidate should also have excellent communication skills to collaborate effectively with team members and other departments. A proactive attitude towards troubleshooting and a keen willingness to learn new technologies are highly valued.

Hi, we have job opportunity for the post office Electronics Engineer fresher at Bangalore, Karnataka, candidate who are fresher or experienced in any stream for example ( electronic engineering, electrical engineering, mechanical engineering, mechatronics engineering) those candidates can apply company will give good salary n room free + over time. N other benefits will give as per company rules

Urgent RequirementsInstrumentation-Engineer(The primary role is to design, develop, install, andmaintain instrumentation systems)(Chemicals Manufacturing Company)Position: Instrumentation Design-Project EngineerJob Location: Goregaon East (Mumbai) MaharashtraQualification: B.E. / B. Tech Electronics, or Instrumentation EngineeringExperience: 3-5 yearsJob Description:Primary role is to design, develop, install, and maintain instrumentation systems used in various industrial processes and systems.Compliance: Ensure compliance with safety regulations and industry standards for instrumentation systemsCompliance: Ensure compliance with safety regulations and industry standards for instrumentation systems1. Technical Skills: Strong knowledge of instrumentation principles, measurement techniques, and control systems2. Familiarity with various instruments and devices such as sensors, transmitters, analyzers, and control valves3. Safety and Compliance: Understanding of safety regulations, standards, and practices applicable to instrumentation systems, such as hazardous area classification, SIL (Safety Integrity Level), and functional safety4. Knowledge of relevant codes and standards (e.g., ISA, IEC, API)5. Attention to Detail: Meticulous attention to detail to ensure accuracy and precision in6. instrumentation system design (AutoCad), installation, and calibration7. Must have experience in instrumentation system design, installation, and calibration in one Sentence8. Familiarity with various instruments and devices such as sensors, transmitters, analyzers, and control valves9. Project Documentation like P&ID, JB Schedule, Instrument Data Sheet , Interlocks sheets & loop diagrams

Urgent RequirementsInstrumentation-Engineer(The primary role is to design, develop, install, andmaintain instrumentation systems)(Chemicals Manufacturing Company)Position: Instrumentation Design-Project EngineerJob Location: Goregaon East (Mumbai) MaharashtraQualification: B.E. / B. Tech Electronics, or Instrumentation EngineeringExperience: 3-5 yearsJob Description:Primary role is to design, develop, install, and maintain instrumentation systems used in various industrial processes and systems.Compliance: Ensure compliance with safety regulations and industry standards for instrumentation systemsCompliance: Ensure compliance with safety regulations and industry standards for instrumentation systems1. Technical Skills: Strong knowledge of instrumentation principles, measurement techniques, and control systems2. Familiarity with various instruments and devices such as sensors, transmitters, analyzers, and control valves3. Safety and Compliance: Understanding of safety regulations, standards, and practices applicable to instrumentation systems, such as hazardous area classification, SIL (Safety Integrity Level), and functional safety4. Knowledge of relevant codes and standards (e.g., ISA, IEC, API)5. Attention to Detail: Meticulous attention to detail to ensure accuracy and precision in6. instrumentation system design (AutoCad), installation, and calibration7. Must have experience in instrumentation system design, installation, and calibration in one Sentence8. Familiarity with various instruments and devices such as sensors, transmitters, analyzers, and control valves9. Project Documentation like P&ID, JB Schedule, Instrument Data Sheet , Interlocks sheets & loop diagrams

As an Instrumentation Engineer, you will play a crucial role in developing, maintaining, and improving instrumentation systems to ensure efficient operation in our facility.**Key Responsibilities:**- **Design and Development**: Create and modify instrumentation designs and specifications to meet project requirements, ensuring functionality and safety standards are met.- **Installation and Maintenance**: Oversee the installation of instrumentation systems and perform regular maintenance checks to ensure optimal performance and to prevent downtime.- **Calibration**: Conduct calibration of various instruments and systems to ensure precision in measurements and compliance with industry standards.- **Troubleshooting**: Identify and resolve issues related to instrumentation, including software and hardware malfunctions, to minimize disruptions in operations.- **Documentation**: Maintain comprehensive records of designs, installations, and maintenance activities, ensuring all documentation is up-to-date for audits and reviews.- **Collaboration**: Work closely with other engineering teams and departments, sharing insights and findings to promote a cohesive work environment and improve overall system performance.**Required Skills and Expectations:**Candidates must possess a Bachelor's degree in Engineering, ideally in Instrumentation or a related field. You should have 3 to 5 years of hands-on experience in instrumentation engineering. Strong analytical skills are vital for troubleshooting and problem-solving. Familiarity with industry regulations and standards is necessary to ensure compliance. Effective communication skills are essential, as you will interact with various teams. Candidates should demonstrate attention to detail and have a proactive approach to improving instrumentation systems.

Job Vacancy: Mechanical EngineerLocations: Singapore New Zealand AzerbaijanSalary: $2,000 $3,000 USD per monthContract Duration: 2-Year Work Permit Visa________________________________________About the Role:We are actively hiring skilled Mechanical Engineers for prominent construction projects in Singapore, New Zealand, and Azerbaijan. This is a prime opportunity to advance your engineering career internationally with excellent remuneration and full support.________________________________________Key Responsibilities: Design, develop, and oversee mechanical systems and equipment for construction projects Ensure compliance with engineering standards, safety regulations, and project requirements Collaborate with multidisciplinary teams to optimize mechanical solutions Monitor project progress, troubleshoot issues, and ensure timely delivery Prepare technical documentation and reports________________________________________Candidate Profile: Proven experience as a Mechanical Engineer, preferably in construction or infrastructure projects Strong knowledge of mechanical systems, design software, and safety protocols Excellent problem-solving, communication, and team collaboration skills Ready and willing to relocate internationally________________________________________Benefits Provided by the Company: Flight ticket included 2-year work permit visa provided Comprehensive medical insurance Free food and accommodation Visa and biometric expenses covered Minimal service charge with no hidden fees________________________________________Office Location for Application & Processing:AL HUDA MANPOWERKolkata, West Bengal________________________________________How to Apply:Interested candidates should send their updated resume and contact details to:AL HUDA MANPOWERKolkata, West Bengal________________________________________Seize this opportunity to elevate your career globally with full company support. Apply today!

Back Office ExecutiveBSC/MSC PhysicsFreshers/ExperiencedCommunication/Email & Computer ExcelSal-15 KNashik Pune Road

Back Office ExecutiveBSC/MSC Chem/PhysicsFreshers/ExperiencedCommunication/Email & Computer ExcelSal-15 KNashik

We are looking for a Calibration Engineer to join our team in Nashik. This entry-level position is ideal for recent diploma graduates, especially females, who are eager to learn and grow in the field of engineering.**Key Responsibilities:**- **Conduct Calibration Checks:** Regularly perform calibration on various instruments and equipment to ensure they operate accurately and meet quality standards.- **Document Calibration Results:** Maintain detailed records of calibration activities and results to track equipment performance and ensure compliance with regulatory requirements.- **Identify Calibration Issues:** Analyze test results to identify any discrepancies or malfunctions in equipment and report these issues for further action.- **Assist in Equipment Maintenance:** Support the maintenance team by ensuring that equipment is in optimal working condition and ready for calibration tasks.- **Collaborate with Team Members:** Work closely with other engineers and technicians to improve calibration procedures and share best practices for quality assurance.**Required Skills and Expectations:**Candidates should hold a diploma in engineering or a related field. While no prior experience is necessary, a basic understanding of calibration principles and practices is advantageous. The ideal candidate should have strong analytical skills, attention to detail, and the ability to work effectively in a team environment. Good communication skills are essential for documenting processes and collaborating with colleagues. A willingness to learn and adapt to new technologies will be highly valued.

Apply under Opportunity Card Germany visaGov. announced visaFamily visaWork and settle in GermanyFree education and medical facilities for familyCandidate is eligible to work in GermanyChild tax benefits givenPension plan givenUnemployment wages givenSalary equal to citizen of GermanyAll post landing services will be guided before landing GermanyCandidate will enjoy dual citizenship

As an Electronics Engineer, you will play a crucial role in designing, developing, and testing various electronic systems and components. Your responsibilities will include:- **Circuit Design**: Create and optimize circuit designs for electronic devices, ensuring they meet specifications and functionality requirements.- **Prototyping**: Develop prototypes to test the performance of electronic systems, allowing for adjustments and improvements before final production.- **Testing and Evaluation**: Conduct thorough testing of electronic components and systems, analyzing results to identify any issues and ensure quality standards are met.- **Documentation**: Maintain accurate documentation of designs, tests, and procedures to facilitate communication and compliance with industry standards.- **Collaboration**: Work closely with other engineers and teams to integrate electronic systems within larger projects, ensuring seamless operation and compatibility.- **Troubleshooting**: Quickly diagnose and resolve technical issues that arise during the design or testing phases, applying critical thinking and problem-solving skills.To succeed in this role, you should have a Bachelors degree in Electronics Engineering or a related field. A basic understanding of electronic circuit design, programming, and simulation software is essential. You should be familiar with using testing equipment like oscilloscopes and multimeters. Strong analytical skills, attention to detail, and the ability to work collaboratively in a team are key. Additionally, effective communication skills will help you convey technical information clearly to team members and stakeholders.

Major Roles & ResponsibilitiesDesign & DevelopmentDesign electrical systems, circuits, and components for various applicationsDevelop schematics and layout diagrams using tools like Auto CAD Electrical or EPLANSelect appropriate electrical materials and componentsInstallation & CommissioningOversee the installation of electrical systems and ensure proper functioningSupervise commissioning processes and conduct performance testsCoordinate with contractors and other engineering teams during implementationMaintenance & TroubleshootingInspect and maintain electrical equipment and systemsDiagnose faults and implement corrective actionsDevelop preventive maintenance schedulesProject ManagementPlan and execute electrical engineering projectsPrepare budgets, estimates, and project timelinesEnsure completion within cost, time, and quality targetsCompliance & SafetyEnsure systems comply with electrical codes and safety standards (e.g., IEC, NEC)Implement electrical safety protocols and risk assessmentsMaintain documentation for audits and inspectionsTesting & Quality AssurancePerform system tests and inspections using appropriate toolsVerify system integrity and performance before handoverEnsure quality control of electrical installations and productsControl Systems & AutomationDesign and implement control systems (e.g., SCADA, PLC)Integrate sensors, drives, and programmable devicesOptimize system performance for efficiency and automationDocumentation & ReportingMaintain technical documentation including drawings, test reports, and manualsPrepare regular progress and performance reportsUpdate records for maintenance and modificationsCollaboration & CommunicationWork with multidisciplinary teams (mechanical, civil, instrumentation)Communicate with vendors, clients, and contractorsProvide technical support and training to staff and stakeholdersInnovation & R&DResearch new technologies and energy-efficient solutionsContribute to product development and innovation projectsStay updated with industry trends and technological advancements