10

Instrumentation Job Vacancies in Nashik

Filters

Hiring For Panel Engineer Fresher

Impact HR & KM Solutions

  • 0 - 1 yrs
  • 3.0 Lac/Yr
  • Nashik
Commissioning Control Systems Electrical Drawings Electrical Engineering HMI Development Industrial Networks Panel Design Panel Layout Project Management Safety Standards SCADA Systems Instrumentation Technical Documentation
Key ResponsibilitiesPanel Design, Engineering & DraftingSchematic & Layout Design: Design electrical schematic drawings, component layout diagrams, and wiring diagrams using CAD software (AutoCAD Electrical, EPLAN) or manual drafting.Component Sourcing & Bill of Materials (BOM): Prepare detailed BOMs, selecting right-sized circuit breakers (MCB, MCCB, ACB), contactors, relays, timers, PLCs, HMI, and busbars based on load requirements.Standards Compliance: Ensure all panel designs conform to relevant Indian Standards (IS) and international electrical safety codes.Assembly Supervision, Wiring & TestingWiring & Fabrication Supervision: Supervise shop-floor technicians during enclosure fabrication, busbar bending/mounting, component fixing, and internal wiring.Quality Control & Testing: Conduct thorough continuity checks, insulation resistance (Megger) testing, high-voltage (HV) tests, and functional/simulation testing of control logic prior to dispatch.Site Troubleshooting & Documentation: Coordinate with installation teams for on-site panel commissioning, fault-finding, and maintenance of complete as-built wiring manuals.
View all details

Diploma/BE Instrumentation For Calibration-Nashik Candidates Required

Career Club Consultancy and Management Services

  • 0 - 1 yrs
  • 2.0 Lac/Yr
  • Nashik
Instrument Calibration Calibration Engineer
Diploma/BE Instrumentation-for Calibration-Nashik Candidates RequiredInstrumentation Engineer Femalefreshers/experiencedcommunication/email & Computer Excel/ Instrumentation / Calibration KnowledgeSal-15 K-18 kNashik
View all details
  • 4 - 6 yrs
  • 5.0 Lac/Yr
  • Nashik
Vendor Development Negotiation Skills Tally ERP Instrumentation Knowledge Of Engineering Material
Purchase Executive Education - Diploma (DME)Experience 5 to 6 yearSalary - Depend on interviewProfileKnowledge of Engineering Material Like Steel/Electrical Pannel /Switch Board /Safety Material /Barring /Screw / Lab Chemical /Uniform /Boiler Chemical /Cooling Tower chemical /Boiler SpareNegotiation skill Knowledge of Vendor DevelopmentInventory Management Computer SkillGood command in Ms Office Knowledge of Tally & ERP
View all details
  • 2 yrs
  • 2.3 Lac/Yr
  • Nashik
BE Mechanical Calibration Engineer Microsoft Office Metrology Instrumentation
GD Instruments Service Urgently Require.1. Quality Engineer / Mechanical Engineer / Calibration EngineerWith knowledge in Quality, System Documentation of ISO/IEC 17025-2017Also 2-3 years of minimum experience in Calibration of Mechanical instruments.Education- Diploma/BE/ B-Tech in Mechanical Engineering.2. Sales Marketing ExecutiveWith 1-2 years of Industrial Marketing experience.Contact details- 9860042191gdinstruments@rediffmail.com
View all details

Get Personalized Job Matches

Based on your experience, skills, interests, and career goals to help you find the most relevant opportunities faster. Register Now!

Urgent Requirement For Calibration Engineer

Quantum HR Placement Services

  • 0 - 3 yrs
  • 3.0 Lac/Yr
  • Satpur MIDC Nashik
Daily Calibrations Instrument Calibration
Job Openings for 3 Calibration Engineer Jobs for Freshers in Satpur MIDC, Nashik, having Educational qualification of : Diploma, B.E, B.Tech with Good knowledge in Daily Calibrations,Instrument Calibration etc.
View all details

SR. Maintenance Executive

Dhumal Metals Pvt Ltd

  • 9 - 10 yrs
  • 6.0 Lac/Yr
  • Nashik
Maintenance Engineer Process Automation SCADA HMI Programming Commissioning Engineer Instrument Engineer Work From Home
Dear madam,Bachelor of Engineering (Electronics and Telecommunication)with 9 year of experience in Industrial Automation, Electrical Electronics Service and Maintenance Operations Presently associated with Dhumal metals pvt ltd,sinnar MIDC, As Engineer (Maintenance and Electrical). Efficient in planning and effecting maintenance schedules of various machines to increase machine up time and equipment reliability Abilities in planning & controlling manufacturing operations as per the product & project Sound knowledge of RXlogix-500, Pico Soft -6, Simatic Manager (V 5.0), Step 7 & TIA Portal(V13.0), Wincc Flexible, Wincc Explorar (V 7.0 &V 7.2), Wonderware (In touch, Historian Client & SQL Server),Starter Software ,S-120 drive system An effective communicator with good analytical and problem solving skills sheet metal handling plant Maintenance,Ship Unloader machine, Stracker Machine, Conveyor , Utility Maintenance
View all details

Quality Control Inspector

Morya Fasteners & Engineering

  • 1 - 3 yrs
  • 2.0 Lac/Yr
  • Nashik
QA-Quality Assurance Quality Control Drawings & Measuring Instruments
In process Part Inspection, Final Product Inspection , Pdir and all System Documentation.
View all details

Calibration Engineer

Technocal Instrumentations

  • 0 - 3 yrs
  • 2.0 Lac/Yr
  • Pathardi Phata Nashik
Instrument Calibration Calibration Engineer
Job Openings for 02 Calibration Engineer Jobs for Freshers in Pathardi Phata, Nashik, Maharashtra, having Educational qualification of : Diploma with Good knowledge in Instrument Calibration etc.
View all details

System Administrator

P.S International HR Consultants

  • 1 - 4 yrs
  • Nashik
System Administration Networking Network Troubleshooting Instrumentation IT Helpdesk Computer Hardware Walk in
Key Responsibility :Strong hardware, software and network troubleshooting skills.Should be able to do Installation, Maintenance and troubleshooting of Windows Server.In-depth knowledge of Windows Server and Desktop Operating Systems.Should be able to handle IT Helpdesk Activities.Good communication and Strong problem-solving abilities.Require 1-4 years of experience as a Computer Hardware/System Engineer.MCP, MCSA, MCSE certification will be an added advantage.
View all details

Calibration Engineer

Global Placement & Career Guidance Center Nashik

  • 2 - 3 yrs
  • 2.0 Lac/Yr
  • Ambad Link Road Nashik
Instrument Calibration Electrical Engineer Electrical Site Engineer Instruments Engineer Walk in
Hiring For Instruments Caliberation Engineer - BE Electrical/Diploma Electrical WIth 2-3 Yrs Experience of Caliberation
View all details

Quality Inspector - Nashik

Impact HR & KM Solutions

  • 2 - 3 yrs
  • 3.5 Lac/Yr
  • Nashik
Quality Control ISO Internal Auditor Problem Solving Quality Analysis Profile Projector Analytical Instruments Coordination Skills Written Communication Problem Analysis Inspections Production Quality Communication Skills
Key ResponsibilitiesPerform incoming, in-process, and final product inspections.Verify products and materials against specifications, drawings, and quality standards.Conduct visual, dimensional, and functional inspections using measuring instruments.Record inspection results and maintain quality documentation.Identify, report, and segregate non-conforming materials/products.Assist in root cause analysis and corrective action implementation.Monitor production processes to ensure adherence to quality requirements.Support internal audits and compliance activities.Calibrate and maintain inspection and testing equipment as required.Collaborate with production, engineering, and quality teams to resolve quality issues.Ensure compliance with company quality policies, safety regulations, and industry standards.
View all details
  • 2 - 3 yrs
  • 3.0 Lac/Yr
  • Nashik
Analytical Executive Analytical Method Development Analytical Analytical Instruments Analytical Chemistry
Key ResponsibilitiesMethod Development & ValidationDevelop and validate robust analytical methods (Assay, Related Substances, Dissolution, Residual Solvents, Uniformity) for active ingredients, raw materials, and finished product formulations.Prepare comprehensive Method Validation Protocols (MVP) and Method Validation Reports (MVR) following ICH guidelines (Q2(R1)).Optimize existing analytical procedures to enhance accuracy, precision, limit of detection (LOD), and limit of quantitation (LOQ).Instrumental Analysis & TestingPerform routine and non-routine analysis using HPLC, GC, UV-Vis Spectrophotometer, FTIR, Dissolution Apparatus, and Karl Fischer Titrator.Conduct forced degradation (stress testing) studies to establish stability-indicating properties of developed analytical methods.Execute analytical testing for forced degradation, impurity profiling, and stability study samples (accelerated and real-time conditions).Regulatory & Documentation ComplianceAuthor Standard Operating Procedures (SOPs), Standard Testing Procedures (STP), Specifications, and Method Transfer Protocols.Ensure strict compliance with cGMP, GLP, and internal safety protocols within the ADL unit.Maintain complete and audit-ready laboratory records, raw data notebooks, chromatograms, and logbooks.Method Transfer & CalibrationFacilitate seamless analytical method transfer (AMT) from ADL to Quality Control (QC) or commercial manufacturing sites.Perform routine calibration, preventive maintenance, and troubleshooting of analytical instruments.Assist in Out-of-Specification (OOS) and Out-of-Trend (OOT) investigation workflows.
View all details

B.Sc Freshers For Research Assistant

Impact HR & KM Solutions

  • Fresher
  • 2.0 Lac/Yr
  • Nashik
Ability to Quickly Learn New Instruments and Research Work. 7. Good English Reading and Writing and Understanding Skills. Research Assistant
Job Openings for 1 Jr Research Assistant Job for Freshers in Nashik, Having Educational Qualification of : B.sc, B.e with Good Knowledge in Ability to Quickly Learn New Instruments and Research Work. 7. Good English Reading and Writing and Understanding Skills. Etc.
View all details
  • 1 - 4 yrs
  • 2.0 Lac/Yr
  • Nashik
Mechanical Maintenance Mechanical Testing Mechanical Engineer Fresher Calibration Engineer Instrument Calibration Walk in
We have a urgent Opening for the post of Calibration Engineer (Quality) in GD Instruments Calibration Nashik.GD Instruments Calibration is an well equipped calibration lab from last 22 year providing services in various fields such as Dimensions, Torque, Pressure, Vaccum, Air velocity, Density & Viscosity, Mass & Weights, Acceleration, RPM, Etc.Location - Flora town, Ambad MIDC, Nashik.Exp-0 to 4 yrsSalary Range - 15k - 20kInterested candidates can send their Latest CVKindly visit our website for more detailsPlease share to make it reach possible job seekers in your network.
View all details

Female - Fresher - Calibration Engineer - Only For Nashik Candidates

Career Club Consultancy and Management Services

  • 0 - 1 yrs
  • 2.0 Lac/Yr
  • Nashik
Instrumentation Instrument Calibration Electronics Engineer
We are looking for a Calibration Engineer to join our team in Nashik. This is an entry-level position ideal for recent graduates or those with minimal experience. The role is responsible for ensuring that measurement and testing equipment operates accurately and effectively.Key Responsibilities:- Calibrate Equipment: Regularly check and adjust instruments and equipment to ensure they produce accurate measurements. This helps maintain quality standards.- Documentation: Maintain clear and detailed records of calibration processes, results, and any adjustments made. This ensures compliance and easy reference.- Troubleshooting: Identify and resolve issues related to equipment performance. This involves investigating discrepancies and determining necessary repairs or recalibrations.- Collaboration: Work closely with other engineers and team members to understand specific calibration needs. Collaboration facilitates effective problem-solving and project completion.- Quality Assurance: Assist in implementing quality control procedures to ensure products meet the required specifications through accurate calibration.Required Skills and Expectations:- A Diploma in Engineering or a related field is mandatory for this role. - Basic understanding of measurement standards and calibration processes is essential.- Strong attention to detail to ensure accurate measurements and quality standards.- Effective communication skills are important to work within a team and document findings clearly.- Proficiency in using calibration tools and software will be an added advantage.- A proactive attitude and willingness to learn are expected as you grow in this role.
View all details

IT Sales Executive || Freshers & Experienced

Career Club Consultancy and Management Services

  • 0 - 4 yrs
  • 3.0 Lac/Yr
  • Nashik
Communication Skills Computer Knowledge MS Office Instrumentation
We are seeking a dedicated and motivated female Business Development Executive to work from home in Nashik. This role is suitable for both fresh graduates and those with up to four years of experience.As a Business Development Executive, you will be responsible for identifying new business opportunities, building relationships with potential clients, and supporting the sales team in achieving targets. Engaging with clients through various communication channels, you will gather information on their needs and provide tailored solutions.Key responsibilities include conducting market research to discover new leads, preparing and delivering presentations, and following up on leads to convert inquiries into actual sales. You will also be tasked with maintaining detailed records of interactions with clients and ensuring a high level of customer service.Candidates must be graduates, possessing a mobile device and a laptop for effective communication and performance. Proficiency in using online platforms and tools for business development activities is essential. The role requires strong communication and interpersonal skills, along with the ability to work independently and manage time efficiently. Candidates should be given a flexible working schedule, as this is a full-time position with a work-from-home arrangement, allowing for a balanced work life.If you are eager to grow your career in business development and are excited about taking on new challenges, we encourage you to apply for this opportunity in Nashik.
View all details

Fresher hiring for Operation Executive

Career Club Consultancy and Management Services

  • 0 - 1 yrs
  • 1.8 Lac/Yr
  • Female
  • Nashik
Microsoft Excel MS-excel Instrument Calibration Office Procedures
BSC/MSC Chem/PhysicsOperation Executive FemaleFreshers/ExperiencedCommunication/Email & Computer Excel/ instrumentation / calibration knowledgeSal-15 KNashik.....................................................
View all details