Job Description (JD) for a KNX Installation Engineer, designed for a professional home automation company handling premium residential, commercial, hospitality and integrated building automation projects.
The role requires strong hands-on installation capabilities, in-depth technical knowledge of KNX, DALI, HVAC integration, AV systems and troubleshooting.
JOB DESCRIPTION
KNX Installation Engineer
Department: Projects / Technical
Designation: Senior KNX Engineer
Experience: 3-7 Years (depending on technical competency)
Location: Kolkata / Site Locations
Employment Type: Full-Time
1. Job Objective
To independently execute, install, configure, commission and troubleshoot KNX-based home automation and integrated building automation systems. The candidate must possess strong technical knowledge of electrical wiring, KNX architecture, programming, system integration and on-site project execution.
The candidate will be responsible for ensuring that all automation installations meet the required technical standards, project specifications and quality expectations.
2. Key Responsibilities
A. KNX System Installation & Execution
- Execute complete KNX home automation installations at residential and commercial project sites.
- Understand and interpret electrical drawings, automation layouts, wiring diagrams and schematic drawings.
- Install KNX bus cables, power supplies, actuators, sensors, keypads and other automation devices.
- Handle installation and termination of KNX devices, including:
- Switching actuators.
- Dimming actuators.
- Blind and curtain actuators.
- HVAC controllers.
- KNX touch panels.
- Motion and occupancy sensors.
- Temperature and humidity sensors.
- KNX IP interfaces and routers.
- Ensure proper bus topology, cable routing, termination and addressing.
- Coordinate with electricians, contractors, interior designers and other agencies.
B. KNX Programming & ETS Configuration
The candidate must have practical working knowledge of KNX programming using ETS5/ETS6.
Responsibilities include:
- Creating and configuring KNX projects using ETS.
- Importing manufacturer product databases.
- Assigning individual addresses to KNX devices.
- Creating and configuring group addresses.
- Developing group address structures for lighting, HVAC, curtains, blinds and other automation functions.
- Downloading applications and programming KNX devices.
- Configuring communication objects and group object associations.
- Understanding flags, datapoint types (DPTs) and communication parameters.
- Performing bus diagnostics and monitoring telegram traffic.
- Troubleshooting communication errors and programming issues.
- Maintaining updated ETS project backups and documentation.
C. Lighting Control & Dimming Integration
Thorough technical understanding of lighting control systems, including:
- KNX switching and dimming.
- DALI and DALI-2 integration.
- DALI DT6 and DT8 configuration.
- Tunable white lighting control (2700K-6500K).
- RGB and RGBW lighting control.
- Phase-cut dimming (leading and trailing edge).
- 0-10V and 1-10V dimming.
- LED driver compatibility and load calculations.
- Lighting scenes, scheduling and centralized control.
- Troubleshooting flickering, dimming incompatibility and driver-related issues.
D. HVAC & VRF Integration
- Integration of VRF and split air-conditioning systems with KNX.
- Working knowledge of CoolMaster and similar HVAC integration gateways.
- Understanding Modbus RTU and Modbus TCP communication.
- Integration of Daikin, Mitsubishi, Toshiba and other HVAC systems.
- Configuration of temperature control, fan speed, operating modes and setpoints.
- Troubleshooting HVAC gateway communication.
- Coordination with HVAC vendors for commissioning and integration.
E. Integrated Home Automation Systems
Practical knowledge of integration with:
- KNX-based lighting and curtain control.
- DALI lighting systems.
- Smart door locks and access control.
- Video door phones and intercom systems.
- CCTV and security systems.
- Home theatre and multi-room audio systems.
- Sonos and other network-based audio systems.
- AV receivers and IP-based AV equipment.
- Motorized curtains and blinds.
- Smart touch panels and visualization systems.
- application and remote-control interfaces.
F. Networking & Communication Protocols
The candidate should have a strong understanding of:
- IP networking fundamentals.
- LAN/WAN configuration.
- Static IP addressing.
- DHCP and subnetting.
- Routers, switches and VLAN fundamentals.
- KNX IP interfaces and KNX/IP routing.
- Modbus RTU and TCP.
- RS232 and RS485 communication.
- TCP/IP and UDP communication.
- Basic MQTT and API integration knowledge (advantageous).
3. Electrical & Technical Knowledge
The candidate must possess a strong electrical background, including:
- Understanding of single-phase and three-phase electrical systems.
- Reading electrical single-line diagrams (SLD).
- Understanding electrical distribution boards and automation panels.
- Relay logic and contactor-based control.
- MCB, RCCB, RCBO and protection devices.
- Load calculations and circuit segregation.
- Control wiring and power wiring.
- Understanding of dry contacts and potential-free contacts.
- Panel wiring, ferruling, cable dressing and termination.
- Testing electrical continuity, insulation and voltage.
- Understanding of earthing and electrical safety.
4. Site Execution & Project Coordination
- Independently manage day-to-day site installation activities.
- Supervise technicians and electricians.
- Prepare daily progress reports.
- Identify technical dependencies and site-level challenges.
- Coordinate with electrical, HVAC, interior and other project vendors.
- Ensure installation is completed within project timelines.
- Conduct pre-commissioning inspections.
- Perform testing, commissioning and final handover.
- Prepare as-built drawings, device schedules and technical documentation.
- Train clients on the operation of installed automation systems.
5. Troubleshooting & Maintenance
The engineer must be capable of independently diagnosing and resolving:
- KNX bus communication failures.
- Incorrect individual and group addressing.
- Actuator and sensor configuration issues.
- DALI communication and addressing problems.
- Lighting flickering and dimming issues.
- HVAC gateway communication failures.
- Network connectivity problems.
- Curtain and blind calibration issues.
- Device programming and application download failures.
- Integration and interoperability issues between different manufacturers.
Educational Qualification
- Diploma or Bachelor's Degree in Electrical Engineering, Electronics Engineering, Instrumentation or a related technical discipline.
- KNX Partner certification will be an added advantage.
- Relevant technical certifications in DALI, HVAC integration or building automation will be preferred.
Educational Qualification
- Diploma or Bachelor's Degree in Electrical Engineering, Electronics Engineering, Instrumentation or a related technical discipline.
- KNX Partner certification will be an added advantage.
- Relevant technical certifications in DALI, HVAC integration or building automation will be preferred.
Experience
3 - 7 Years
No. of Openings
3
Education
Diploma (Electrical, Engineering)
Role
KNX Installation Engineer
Industry Type
Industrial Automation & Control
Gender
[ Male / Female ]
Job Country
India
Type of Job
Full Time
Work Location Type
Work from Office
Face Interview Location
45, Shakespear sarani, kolkata -