Quality Analysis Jobs in India

WE ARE HIRING Quality Control EngineerModi Groups is looking for an experienced Quality Control Engineer to join our team at Bhilwara, Rajasthan.Position: Quality Control EngineerLocation: Bhilwara, RajasthanQualification: B.Tech in Civil EngineeringExperience: Minimum 5 years in Quality ControlProject Experience: Railway & Road/Highway Infrastructure ProjectsWe are looking for professionals with strong experience in quality assurance, inspections, testing, documentation, and maintaining quality standards across infrastructure projects.Send your CV: hr@modigroups.inCall / WhatsApp: 9511333148If you or someone in your network fits the profile, feel free to share this opportunity.Modi Groups Building Infrastructure for a Better TomorrowWork Location: In person

Key ResponsibilitiesPrepare, review, and approve engineering designs, drawings, and specifications.Plan and oversee construction activities for residential, commercial, industrial, or infrastructure projects.Conduct site inspections and monitor project progress.Ensure compliance with safety regulations, building codes, and environmental standards.Coordinate with architects, contractors, consultants, and government authorities.Prepare project estimates, budgets, and schedules.Review construction materials and workmanship for quality assurance.Identify and resolve engineering and construction-related issues.Prepare technical reports, documentation, and project updates.Support tendering, contract administration, and project close-out activities.

Supplier Development ManagerExperience: 10-14 YearsLocation: ChennaiWe are hiring a Supplier Development Manager to drive supplier capability, quality, cost, delivery, and continuous improvement across the automotive supply chain.Key ResponsibilitiesDevelop, evaluate, and improve automotive supplier performance.Drive supplier quality, productivity, cost, and delivery improvements.Conduct supplier audits and capability assessments.Lead supplier development and corrective action initiatives.Work with suppliers on APQP, PPAP, process improvement, and quality standards.Identify supplier risks and ensure timely resolution of issues.Collaborate with Procurement, Quality, Engineering, and Production teams.Track supplier KPIs and drive continuous improvement programs.Relevant SkillsSupplier Development, Automotive, Supplier Quality, APQP, PPAP, Supplier Audit, IATF 16949, Root Cause Analysis, 8D, Cost Reduction, Vendor Management, Quality Improvement, Supply Chain, Lean Manufacturing

Urgent Requirement for Chemical and Pharma Industries Location - Chennai Department - Qc chemist Qualification - BE / BTech / Dip - Chemical , Chemistry ,Biotech , petroleum , petrochemical - BSc / MSc - Chemistry , biochemistry , microbiology Note : Immediate joiners are prefered

We are seeking a Quality Assurance Quality Control Engineer to ensure our products meet the highest standards of quality. The ideal candidate will have 4 to 10 years of experience and a relevant degree, with a strong focus on maintaining quality in manufacturing processes.Key Responsibilities:1. Quality Testing: Conduct thorough testing of products to identify any defects or issues, ensuring they meet the required specifications before release.2. Documentation: Maintain detailed records of testing processes, results, and quality control activities for compliance and review purposes. 3. Process Improvement: Analyze quality control data and collaborate with production teams to identify areas for improvement, thus enhancing overall product quality.4. Standards Compliance: Ensure that manufacturing processes comply with industry standards and regulations, keeping up-to-date with changes in quality standards.5. Training and Support: Provide training and support to team members on quality control processes and best practices, fostering a culture of quality within the organization.Required Skills and Expectations:Candidates should possess strong analytical skills to identify issues and solutions, with attention to detail being crucial. Good communication skills are needed to convey quality expectations clearly to teams. Candidates must be collaborative, willing to work as part of a team to achieve common quality goals. A solid understanding of quality assurance methodologies and tools is essential for success in this role.

Key Responsibilities: QMS Implementation & Maintenance: Develop, implement, and monitor QMS policies, procedures, and documentation as per ISO 9001 and industry-specific standards. Process Control: Ensure process audits, inspections, and corrective actions are carried out to maintain quality in brass production processes. Internal & External Audits: Plan, coordinate, and conduct internal audits; facilitate external audits (certification, customer, or regulatory). Customer Quality Assurance: Address customer complaints, coordinate root cause analysis, and implement corrective/preventive actions (CAPA). Training & Awareness: Conduct QMS training and awareness sessions for employees at all levels to foster a culture of quality. Continuous Improvement: Drive initiatives for reducing defects, improving yield, and enhancing customer satisfaction. Compliance & Reporting: Ensure adherence to statutory, regulatory, and customer-specific quality requirements; prepare management review reports.

We are seeking a QC Manager with 5 to 10 years of experience to oversee quality control processes at our facility in Siltara, Raipur. This full-time position requires a dedicated professional to ensure product quality and adhere to industry standards.nnKey Responsibilities:nn1. Oversee Quality Assurance: Ensure that all products meet quality standards and comply with regulatory requirements through systematic inspections and testing processes.n n2. Develop Quality Control Plans: Create and implement effective quality control procedures to enhance product reliability and consistency.nn3. Lead the QC Team: Manage and mentor a team of quality control staff, providing training and support to foster a culture of quality awareness.nn4. Analyze Data: Review quality control data and generate reports to identify patterns or areas for improvement, making recommendations based on findings.nn5. Coordinate with Departments: Collaborate with production, engineering, and supply chain teams to address quality-related issues and drive continuous improvements.nnRequired Skills and Expectations:nnThe ideal candidate should possess a strong educational background with a degree and relevant experience in quality control. Strong analytical and problem-solving skills are essential for identifying issues and developing solutions. Effective leadership and communication skills are important for managing teams and coordinating with various departments. A keen attention to detail and organizational abilities will aid in maintaining high-quality standards in all operations.

We are looking for a Quality Assurance Manager with 5 to 11 years of experience, located in Siltara, Raipur. The ideal candidate will ensure our products meet the highest quality standards and help maintain a culture of continuous improvement.nnKey responsibilities include overseeing quality assurance processes and systems to ensure compliance with standards. You will manage a team of quality assurance professionals, train them on best practices, and monitor their performance closely. Additionally, you'll be responsible for identifying areas for improvement and implementing corrective actions.nnYou will develop and maintain quality documentation, ensuring that all procedures and policies are followed correctly. Conducting audits and inspections to guarantee compliance with regulatory requirements and company policies is also essential. Furthermore, you will collaborate with other departments to resolve quality-related issues and help develop new products that meet customer expectations.nnTo succeed in this role, you should have a strong background in quality assurance methodologies and practices. Excellent leadership skills are essential, as you will be guiding a team to uphold quality standards. Effective communication skills are crucial for collaborating with various departments and presenting findings to management. A proactive attitude towards quality improvement and the ability to analyze data to make informed decisions is required. A graduate degree is necessary, and experience in a similar role will set you apart.

Role & responsibilities Manage day-to-day production activities for Namkeen and Sweets.Develop and maintain consistent taste, texture, appearance, and quality of products.Monitor production processes and ensure products meet company quality standards.Handle recipe standardization and product improvement.Identify and resolve production and quality-related issues.Check and control the quality of raw materials, ingredients, oil, spices, dry fruits, etc.Reduce production wastage and improve yield and productivity.Coordinate with Production, Quality, Purchase, and R&D teams.Maintain proper production records, batch details, and quality parameters.Ensure proper hygiene, food safety, and GMP practices on the production floor.Train and supervise production staff and workers.Assist in developing new namkeen and sweet products according to market requirements.Preferred candidate profile: Associate Manager Namkeen & Sweets to manage and improve the production, quality, taste, consistency, and product development of namkeen and traditional sweets.The ideal candidate should have strong practical knowledge of namkeen and sweets manufacturing, raw materials, recipes, processing methods, quality standards, and production troubleshooting.

We are seeking a dedicated Quality Analyst to join our team in Visakhapatnam. This role is ideal for individuals with 1 to 3 years of experience who are passionate about ensuring high quality in products and processes.nnKey Responsibilities:nn1. Perform Testing: Conduct thorough testing on software products to identify bugs or issues, ensuring they meet quality standards before release.nn2. Documentation: Maintain detailed records of test results, bugs, and resolutions, facilitating clear communication among team members and stakeholders.nn3. Collaboration: Work closely with development teams to understand product requirements and provide feedback on possible improvements for quality enhancement.nn4. Process Improvement: Analyze existing quality assurance processes and suggest enhancements to increase efficiency and effectiveness.nn5. Reporting: Create comprehensive reports on testing outcomes and quality metrics, informing upper management about product quality status.nnRequired Skills and Expectations:nnCandidates should possess a degree and have 1 to 3 years of relevant experience in quality assurance. Strong analytical skills are necessary to identify issues effectively. Attention to detail is crucial for documenting findings accurately. Applicants should demonstrate good communication skills to relay information clearly among team members. A proactive approach to problem-solving and a commitment to continuous improvement in quality processes is expected. The role involves working from the office, encouraging collaboration and teamwork.

As an NDT Coordinator, you will play a vital role in conducting training at our Non-Destructive Testing Institute. With 5 to 10 years of experience, you will be responsible for delivering high-quality training sessions and ensuring compliance with industry standards.Key responsibilities include:- Facilitating and conducting training programs focused on non-destructive testing methods to enhance the skills of aspiring professionals.- Developing training materials and curricula to ensure effective learning experiences.- Monitoring and evaluating trainee performance to provide constructive feedback and support.- Maintaining compliance with ASNT Level 3 standards and promoting best practices in non-destructive testing.To be successful in this role, you are expected to have:- A solid understanding of non-destructive testing principles and practices.- A valid ASNT Level 3 certification, which is essential for conducting specialized training.- Excellent communication skills for effective interaction with trainees and colleagues.- Strong organizational skills to manage training schedules and documentation.This position is a full-time, office-based role located in Greater Noida, India. You will be expected to travel occasionally as required by training demands. A laptop and mobile device will be provided for you to manage your responsibilities effectively. Your commitment and expertise will contribute to the development of a skilled workforce in the NDT field.

Job Title: Quality Analyst - Credit Analysis & Report AuditJob Summary:We are looking for a detail-oriented Quality Analyst to handle credit analysis, report auditing, and quality checks. The candidate will be responsible for reviewing credit reports and documentation, identifying discrepancies, and ensuring accuracy and compliance with process standards.Key Responsibilities:Conduct detailed credit analysis and review financial information.Audit credit reports, applications, and supporting documents for accuracy.Identify errors, discrepancies, and potential data or process gaps.Ensure reports comply with company policies and quality standards.Verify data, calculations, and documentation before final submission.Prepare audit reports and highlight quality issues for corrective action.Coordinate with relevant teams to resolve discrepancies and improve accuracy.Maintain proper records of audits, observations, and quality performance.Requirements:Graduate in any discipline; Finance/Commerce preferred.Experience in Credit Analysis, Credit Operations, Quality Audit, or Report Audit preferred.Strong analytical and numerical skills.Good knowledge of MS Excel and reporting.Excellent attention to detail and accuracy.Good written and verbal communication skills.Ability to meet deadlines and maintain confidentiality.Experience: 1-3 YearsSalary: As per experience and company standardsLocation: THANE

We are looking for an experienced R&D Incharge to lead our research and development efforts. This role requires a dedicated professional who can manage projects and guide a team in innovative research activities.Key Responsibilities:- Project Management: Oversee R&D projects from conception to completion, ensuring they are on schedule and meet quality standards. This includes setting project goals and timelines, and coordinating with other teams.- Team Leadership: Lead and mentor a team of researchers and scientists. Provide guidance, share knowledge, and encourage a collaborative environment to foster innovation.- Research Development: Conduct and supervise research activities to develop new products or improve existing ones. This involves working closely with team members to explore new ideas and methodologies.- Data Analysis: Analyze experimental data and compile reports to present findings. It is essential to ensure that all research is documented accurately for future reference.- Compliance: Ensure all research activities comply with safety and regulatory standards. Maintain strict adherence to best practices, ensuring a safe and efficient working environment.Required Skills and Expectations:Candidates should possess an M.Sc. degree and have 8 to 14 years of relevant experience in research and development. The ideal candidate must demonstrate strong leadership capability, excellent analytical skills, and a thorough understanding of R&D processes. They should be able to communicate effectively with both technical and non-technical stakeholders, as well as show a commitment to fostering innovation and continuous improvement. The position requires a male candidate, reflecting the team dynamics.

Job PurposeThe Quality Controller will be responsible for ensuring that raw materials, components, in-process products and finished products meet defined quality standards, approved drawings, specifications and customer requirements.The role will involve regular inspection at different stages of production, identification of defects, coordination with Production and other departments, maintaining quality records, and supporting corrective and preventive actions.Key ResponsibilitiesA. Incoming Material Inspection Inspect incoming raw materials and bought-out components. Check Brass, Iron, Zinc, Aluminium, Steel and other materials as per specifications. Verify dimensions, quantity, grade, surface condition and material quality. Identify and report defective or non-conforming materials. Maintain incoming inspection records.B. In-Process Quality Control Conduct quality inspections at different stages of manufacturing. Monitor machining, casting, forging, pressing, drilling, grinding, polishing, finishing and assembly processes. Ensure products are manufactured according to approved drawings and specifications. Identify defects at the earliest stage to reduce rejection and rework. Coordinate with Production Supervisors for immediate corrective action.C. Final Inspection Carry out final inspection of finished products before packing and dispatch. Check:o Dimensionso Toleranceso Appearanceo Surface finisho Colour and platingo Functionalityo Assemblyo Packing and labelling Ensure only approved products are released for dispatch.D. Drawing & Measurement Read and understand engineering/product drawings. Check dimensions and tolerances as per approved drawings. Use measuring instruments such as:o Vernier Calipero Micrometero Height Gaugeo Plug Gaugeo Ring Gaugeo Thread Gaugeo Measuring Scales and other inspection equipment. Ensure measuring instruments are properly maintained and calibrated.E. Surface Finish & Plating Inspection Inspect polishing, buffing, plating, powder coating, PVD and other finishing processes. Identify scratches, dents, colour variation, stains, plating defects, roughness and other surface defects. Coordinate with finishing vendors/departments regarding quality problems.F. Defect & Rejection Control Identify, segregate and record rejected products. Maintain daily rejection and rework reports. Analyse recurring quality problems. Communicate major defects immediately to Production and QA/QC management. Support reduction of rejection, rework and customer complaints.G. Quality DocumentationMaintain proper records including: Incoming Inspection Reports In-Process Inspection Reports Final Inspection Reports Rejection Reports Rework Reports NCR Reports Corrective Action Reports Calibration Records Product Inspection Checklists Customer Complaint RecordsH. Root Cause & Corrective Action Participate in investigation of quality problems. Use basic Root Cause Analysis techniques such as 5 Why and Fishbone Analysis. Support implementation of Corrective and Preventive Actions (CAPA). Verify effectiveness of corrective actions.I. Customer & Product Quality Understand customer-specific quality requirements. Ensure production is carried out according to approved samples, drawings and specifications. Support customer inspections and quality audits when required. Assist in investigation and resolution of customer complaints.Required Technical Skills Good knowledge of quality inspection procedures. Knowledge of Brass, Iron, Zinc, Aluminium and other metal hardware. Good knowledge of engineering drawings and tolerances. Knowledge of measuring instruments. Knowledge of surface finishing and plating defects. Knowledge of AQL and sampling inspection. Basic knowledge of 7 QC Tools. Root Cause Analysis and CAPA. Knowledge of calibration and inspection systems. Knowledge of production processes and defect identification.Computer Skills MS Excel MS Word Preparation of inspection reports Basic ERP/MIS knowledge Data entry and quality reportingEducational QualificationDiploma / ITI / B.Tech / B.E. in Mechanical, Production, Metallurgy, Quality or related technical discipline.Candidates with relevant practical experience in manufacturing may also be considered.Experience2-5 years of experience in: Builder Hardware Architectural Hardware Brass Hardware Iron Hardware Zinc Hardware Aluminium Hardware Sanitary Hardware Metal Components Engineering/Manufacturing IndustryExperience in quality inspection and manufacturing processes will be preferred.

We are seeking a motivated Branch Operation Manager to oversee daily operations in our Aligarh location. The ideal candidate will have 2 to 8 years of experience in managing branch activities and ensuring smooth workflow.Key Responsibilities:- Operational Management: Supervise day-to-day branch operations to ensure efficiency and quality service. This includes monitoring staff performance and optimizing processes.- Team Leadership: Lead a team of employees, providing guidance and support to enhance their performance. Encourage teamwork and a positive work environment.- Customer Service: Ensure exceptional service delivery to customers by resolving issues promptly and efficiently. Maintain high satisfaction levels through effective communication.- Compliance: Ensure the branch adheres to all company policies and regulatory requirements. Regularly review operational compliance and implement corrective actions as needed.- Reporting: Prepare and present detailed reports on branch performance, including sales, expenses, and customer feedback. Use these reports to identify areas for improvement.Required Skills and Expectations:Candidates should possess a graduate degree and show strong leadership abilities. Effective communication skills are essential, along with a proactive approach to problem-solving. The ability to work well under pressure and manage multiple priorities is necessary. A solid understanding of branch operations and customer service principles will be valuable. Adaptability and a positive attitude are crucial for fostering a productive work environment.

Key ResponsibilitiesPerform incoming, in-process, and final product inspections.Verify products and materials against specifications, drawings, and quality standards.Conduct visual, dimensional, and functional inspections using measuring instruments.Record inspection results and maintain quality documentation.Identify, report, and segregate non-conforming materials/products.Assist in root cause analysis and corrective action implementation.Monitor production processes to ensure adherence to quality requirements.Support internal audits and compliance activities.Calibrate and maintain inspection and testing equipment as required.Collaborate with production, engineering, and quality teams to resolve quality issues.Ensure compliance with company quality policies, safety regulations, and industry standards.

Key ResponsibilitiesConduct quality inspections of raw materials, in-process products, and finished goods.Monitor production activities to ensure compliance with quality standards and specifications.Perform testing, measurements, and analysis of products as per established procedures.Identify quality issues, defects, and non-conformities and report findings to management.Recommend and implement corrective and preventive actions (CAPA).Maintain accurate quality records, inspection reports, and documentation.Ensure compliance with company quality policies, industry regulations, and safety standards.Investigate customer complaints related to product quality and support root cause analysis.Collaborate with production, maintenance, and inventory teams to resolve quality concerns.Participate in internal audits and quality improvement initiatives.Assist in developing and updating quality control procedures and work instructions.

Key ResponsibilitiesAssist in inspecting raw materials, work-in-progress items, and finished products.Support quality testing and measurement activities according to established procedures.Record inspection results and maintain accurate quality documentation.Identify defects, quality concerns, or non-conformities and report them to the Quality Control Officer or Supervisor.Assist in monitoring production processes to ensure adherence to quality standards.Help maintain testing equipment and ensure proper calibration records are updated.Participate in quality audits and continuous improvement initiatives.Ensure compliance with safety regulations, quality policies, and operational procedures.Assist in investigating customer complaints and quality-related issues when required.Maintain cleanliness and organization within the quality control area.

We are seeking a dedicated Manufacturing Chemist with 5 to 11 years of experience to work full-time in our Raipur facility. In this role, you will be accountable for producing various pharmaceutical products, including tablets, capsules, ointments, syrups, and veterinary liquids and powders, in compliance with batch manufacturing records (BMR), standard operating procedures (SOP), and good manufacturing practices (GMP).Key responsibilities include operating production equipment and maintaining accurate batch records, ensuring that all production processes adhere to safety and hygiene standards. You will also collaborate closely with the quality assurance and quality control teams to ensure consistency and quality in production activities. To succeed in this role, you should hold a graduate degree, and strong attention to detail is essential. You will need excellent communication skills to coordinate effectively with colleagues and other departments. Prior experience handling production equipment and an understanding of quality control processes will be advantageous. Ensuring compliance with safety regulations and maintaining a clean working environment will also be critical. This position requires working from the office at our Siltara location. All interested candidates must be male, as specified in the job requirements. If you have a passion for manufacturing and quality assurance in the pharmaceutical industry, we invite you to apply.

JOB PURPOSEThe Manager QA/QC will be responsible for managing the complete Quality Assurance and Quality Control function of the organization.The role will ensure that raw materials, manufacturing processes, finished products and dispatches consistently meet approved drawings, specifications, quality standards, customer requirements and applicable compliance requirements.The Manager QA/QC will establish robust quality systems, lead the QA/QC team, control rejection and rework, manage customer complaints and audits, drive root-cause analysis and CAPA, and continuously improve product and process quality.KEY RESPONSIBILITIESA. Quality Assurance - QA Develop, implement and maintain the company's Quality Management System (QMS). Prepare and implement Quality Policies, SOPs, Work Instructions and Inspection Standards. Establish quality objectives, procedures and KPIs. Conduct internal quality and process audits. Ensure compliance with applicable customer and quality requirements. Review and improve existing quality systems and processes. Establish preventive quality controls to minimize defects. Maintain proper quality documentation and records. Promote a Right First Time and zero-defect culture.B. Quality Control - QCManage and monitor quality at all stages:Incoming Material In-Process Finishing Assembly Final Inspection Packing Dispatch Establish inspection standards and checklists. Ensure incoming material inspection. Ensure in-process inspection at critical manufacturing stages. Conduct and monitor final inspection. Verify dimensions, tolerances, appearance, functionality and surface finish. Ensure products conform to approved drawings, samples and specifications. Ensure non-conforming products are properly identified, segregated and controlled.C. Raw Material & Incoming Quality Develop incoming inspection procedures for:o Brasso Irono Zinco Aluminiumo Steelo Bought-out componentso Packaging materials Verify material specifications, dimensions and quality. Monitor supplier quality performance. Coordinate with Purchase and Stores regarding rejected materials. Maintain supplier rejection records and quality performance data.D. In-Process Quality ControlMonitor quality during: Casting Forging Pressing CNC/VMC machining Drilling Tapping Grinding Buffing Polishing Finishing Plating Powder Coating PVD Assembly Responsibilities include: First-piece approval Process inspection Critical dimension monitoring Process parameter control Defect identification Rejection/rework control Process improvementE. Final Inspection & Product ReleaseEnsure finished products are inspected before dispatch for: Dimensions Tolerances Appearance Surface finish Plating/coating Colour/shade Assembly Functionality Strength/performance Packing Labelling QuantityEnsure products are released for dispatch only after meeting defined quality requirements.CUSTOMER QUALITY MANAGEMENT Handle customer quality complaints professionally and promptly. Investigate customer complaints and identify root causes. Prepare 8D, CAPA and Root Cause Analysis reports. Coordinate customer inspections and quality audits. Maintain customer complaint records and trend analysis. Ensure corrective actions are implemented within agreed timelines. Verify effectiveness of corrective actions. Communicate customer-specific requirements to Production and other departments. Monitor customer satisfaction and recurring quality issues.ROOT CAUSE ANALYSIS & CAPALead quality problem-solving using: 5 Why Analysis Fishbone / Ishikawa Pareto Analysis 7 QC Tools Process Analysis Failure AnalysisResponsibilities: Identify root cause rather than only treating symptoms. Raise NCRs for significant non-conformities. Define corrective and preventive actions. Assign responsibility and target dates. Monitor CAPA closure. Verify effectiveness. Prevent recurrence of defects.SUPPLIER QUALITY MANAGEMENT Evaluate and monitor supplier quality performance. Establish supplier quality standards. Conduct supplier audits where required. Monitor supplier rejection and defect trends. Issue Supplier Corrective Action Requests. Work with Purchase for supplier development. Support approval of new suppliers from a quality perspective. Maintain supplier quality scorecards.CUSTOMER & PRODUCT SPECIFICATION CONTROL Ensure availability of approved drawings and specifications. Ensure production works only against approved drawings/samples. Control drawing revisions and specification changes. Ensure customer-specific requirements are communicated to concerned departments. Establish product inspection standards for new products. Participate in NPD, sampling and product development activities.SURFACE FINISH & PLATING QUALITYEnsure quality control of: Polishing Buffing Electroplating Nickel Chrome Brass finishes Antique finishes PVD Powder Coating Other decorative/protective finishesMonitor defects such as: Scratches Dents Colour variation Uneven finish Stains Peeling Poor adhesion Plating defects Surface roughness Coating thickness variationTESTING & CALIBRATION Establish product testing requirements. Ensure availability of appropriate testing equipment. Monitor calibration of measuring and testing instruments. Maintain calibration schedules and records. Ensure measuring instruments are suitable for their intended application. Coordinate external testing/laboratory requirements where necessary.QUALITY TEAM MANAGEMENT Lead the QA/QC team effectively. Define responsibilities and targets for QC Inspectors. Allocate inspection manpower according to production requirements. Train QC personnel on inspection methods and quality standards. Conduct regular quality meetings. Evaluate team performance. Identify training requirements. Develop quality awareness among production employees. Ensure discipline and consistency in inspection practices.PRODUCTION & CROSS-FUNCTIONAL COORDINATIONWork closely with: Production PPC Tool Room NPD/Sampling Purchase Stores Finishing Maintenance Dispatch MerchandisingThe Manager QA/QC should act as a bridge between Quality and Production, ensuring that quality issues are resolved at the process level without unnecessarily affecting production schedules.QUALITY MIS & REPORTINGPrepare and review: Daily Quality Reports Incoming Inspection Reports In-Process Inspection Reports Final Inspection Reports Rejection Reports Rework Reports NCR Reports CAPA Reports 8D Reports Customer Complaint Reports Supplier Quality Reports Quality KPI Reports Monthly Quality MISAnalyse trends for:Rejection Rework Scrap Customer Complaints Supplier Defects Process Defectsand initiate improvement actions.REQUIRED TECHNICAL SKILLSThe candidate should have strong knowledge of: Builder/Architectural Hardware Manufacturing Brass, Iron, Zinc, Aluminium & Steel Products Engineering Drawings GD&T / Basic Tolerances Measuring Instruments AQL & Sampling Incoming/In-Process/Final Inspection Surface Finishing Plating & Coating QMS ISO 9001 Internal Auditing 7 QC Tools SPC Root Cause Analysis CAPA 8D Problem Solving Supplier Quality Calibration Process Auditing Quality DocumentationCOMPUTER SKILLS Advanced MS Excel Quality MIS Quality Dashboards Data Analysis Pareto Charts Rejection Trend Analysis MS Word PowerPoint ERP/MIS softwareEDUCATIONAL QUALIFICATIONB.Tech / B.E. / Diploma in: Mechanical Engineering Production Engineering Industrial Engineering Metallurgy Quality Engineering or related technical discipline.Certification in ISO 9001, Six Sigma, Quality Auditing or Quality Management will be an advantage.EXPERIENCE8-12 years of relevant experience, preferably in: Builder Hardware Architectural Hardware Brass Hardware Iron Hardware Zinc Hardware Aluminium Hardware Sanitary Hardware Metal Components Engineering Manufacturing Export-oriented ManufacturingExperience in international customer requirements, export quality standards and customer audits will be preferred.