Technician Job Vacancies in Kerala

An Aircraft Technician is responsible for inspecting, maintaining, repairing, and testing aircraft systems and components to ensure safe and efficient aircraft operations. The technician works on mechanical, electrical, hydraulic, pneumatic, and avionics systems according to aviation safety standards and regulatory requirements.Aircraft Technicians perform scheduled maintenance, troubleshoot technical faults, replace defective parts, and certify aircraft readiness for flight under the supervision of licensed engineers when required.Key ResponsibilitiesAircraft Inspection & MaintenancePerform routine and scheduled aircraft maintenance checks.Inspect aircraft structures, engines, landing gear, and control systems.Conduct pre-flight, transit, daily, weekly, and periodic inspections.Identify defects, malfunctions, and mechanical issues.Repair & TroubleshootingDiagnose technical and mechanical faults in aircraft systems.Repair or replace damaged aircraft components and parts.Troubleshoot hydraulic, pneumatic, fuel, electrical, and engine systems.Use specialized testing and diagnostic equipment.Component InstallationInstall aircraft parts, instruments, wiring, and assemblies.Remove and replace aircraft engines or system components when required.Ensure all installations comply with aviation safety standards.Documentation & ReportingMaintain accurate maintenance logs and technical records.Complete inspection reports and work orders.Record all repairs, replacements, and maintenance activities.Ensure compliance with aviation authority regulations.Safety ComplianceFollow aviation safety procedures and maintenance manuals.Adhere to company policies and international aviation regulations.Ensure tools and equipment are properly calibrated and maintained.Maintain a clean and safe working environment.Team CoordinationWork closely with Aircraft Maintenance Engineers, pilots, and ground staff.Coordinate with technical supervisors and quality assurance teams.Assist during aircraft turnaround operations.Types of Aircraft Systems HandledAircraft EnginesHydraulic SystemsElectrical SystemsFuel SystemsBrake SystemsPneumatic SystemsLanding GearFlight Control SystemsCabin SystemsAvionics EquipmentRequired SkillsStrong mechanical and technical knowledgeTroubleshooting and problem-solving abilityKnowledge of aircraft systems and maintenance proceduresAbility to read technical manuals and engineering drawingsAttention to detail and accuracyGood communication and teamwork skillsTime management and multitasking abilitiesSafety awareness and compliance knowledgeEducational QualificationsDiploma or Degree in Aircraft Maintenance Engineering, Aeronautical Engineering, or Aerospace EngineeringAME (Aircraft Maintenance Engineering) certification preferredDGCA/FAA/EASA-approved training is an advantageTechnical vocational training in aviation maintenance may also be acceptedExperience RequirementsFresherBasic knowledge of aircraft maintenance proceduresInternship or training experience preferredExperienced Technician1-5+ years of aircraft maintenance experienceExperience on commercial or private aircraftFamiliarity with aviation maintenance software and toolsCertifications PreferredDGCA AME LicenseFAA A&P LicenseEASA Part-66 LicenseHuman Factors & Safety TrainingFuel Tank Safety CertificationAviation Safety Management TrainingWorking EnvironmentAirportsAircraft hangarsMaintenance workshopsAviation maintenance organizations (MRO)Airlines and private aviation companiesAircraft Technicians may work:Rotational shiftsNight shiftsWeekends and holidaysIn noisy and physically demanding environmentsPhysical RequirementsAbility to stand for long hoursClimb ladders and work at heightsLift heavy aircraft parts and toolsWork in confined spacesGood hand-eye coordination and physical fitnessSalary Range (Approx.)IndiaFresher: 20,000 - 35,000 per monthExperienced: 40,000 - 1,20,000+ per month

Installing an 11kV pole-mounted substation involves erecting H-poles or single poles (concrete or steel), mounting a transformer ((

We are looking for an Aircraft Maintenance Engineer to ensure the safe and efficient operation of aircraft. The position is based in Kannur, and we invite candidates with 0 to 6 years of experience, including fresh graduates who have completed their 12th grade.**Key Responsibilities:**- **Perform Routine Inspections:** Conduct regular checks on aircraft systems and components to identify and rectify any issues before they affect flight safety.- **Carry Out Repairs and Maintenance:** Fix mechanical and electronic issues in aircraft, ensuring all repairs adhere to safety guidelines and regulatory standards.- **Document Maintenance Activities:** Keep clear records of all maintenance work, inspections, and repairs conducted on the aircraft for compliance and future reference.- **Collaborate with Team Members:** Work closely with a team of engineers and technicians to ensure all aircraft are maintained efficiently and safely.- **Stay Updated on Procedures:** Regularly review and understand aviation regulations and maintenance standards to ensure compliance during inspections and repairs.**Required Skills and Expectations:**Candidates should have a strong attention to detail to identify potential safety issues. Good problem-solving skills are essential to troubleshoot and resolve maintenance challenges. Strong teamwork and communication abilities are expected, as collaboration with colleagues is key in this role. Basic computer skills are important for maintaining records and utilizing maintenance software. A proactive approach to learning and staying updated on the latest technology and processes in aviation maintenance is also highly valued.

Aircraft Maintenance Engineer (AME) Job SummaryAircraft Maintenance professionals are responsible for inspecting, repairing, and maintaining aircraft systems to ensure safety, airworthiness, and compliance with aviation regulations. They work on airframes, engines, electrical systems, and avionics. Key Responsibilities1. Inspection & MaintenanceConduct routine inspections before and after flightsPerform scheduled maintenance (A-check, B-check, C-check, D-check)Diagnose mechanical and technical faults2. Repair & TroubleshootingRepair or replace defective aircraft componentsTroubleshoot engine, hydraulic, and electrical issuesUse diagnostic tools and maintenance manuals3. Testing & Quality ControlTest aircraft systems after maintenanceEnsure all systems meet safety standardsPerform functional and operational checks4. DocumentationMaintain accurate maintenance logs and recordsEnsure compliance with aviation authoritiesReport defects and corrective actions5. Safety ComplianceFollow strict aviation safety regulationsUse proper tools and protective equipmentEnsure aircraft meets airworthiness standards Types of Aircraft MaintenanceLine Maintenance - Routine checks at airportsBase Maintenance - Major repairs in hangarsPreventive Maintenance - Scheduled servicingCorrective Maintenance - Fixing faults/issues Education & QualificationsDiploma/Degree in Aircraft Maintenance Engineering or Aerospace EngineeringCertification from aviation authorities like:DGCA IndiaFAAEASAAME License (mandatory for certifying engineers) Required SkillsStrong technical and mechanical knowledgeAttention to detailProblem-solving abilityKnowledge of aircraft systems and toolsAbility to work under pressureGood communication and teamwork Tools & Equipment UsedDiagnostic testing equipmentHand and power toolsAircraft maintenance softwareTechnical manuals and blueprints Working ConditionsShift-based work (including nights and weekends)Work in hangars, airports, or outdoor environmentsPhysically demanding (lifting, climbing, bending)Exposure to noise and chemicals Career OpportunitiesAircraft Maintenance TechnicianLicensed Aircraft Maintenance EngineerQuality InspectorMaintenance SupervisorMRO SpecialistTop aviation employers include airlines, defense organizations, and companies like Air India, IndiGo, and SpiceJet. Salary (India Approx.)Fresher: 3 - 4 LPAExperienced: 5 - 12+ LPALicensed AME: 10 - 25+ LPA

Key Responsibilities:- LAN cable laying and RJ45 termination- OFC laying (Overhead / Underground) and basic fiber splicing- Installation & configuration of routers, switches, access points- CCTV installation (DVR/NVR/IP cameras)- OTDR testing, power meter testing, LAN testing- Troubleshooting broadband and leased line (ILL) issues- Daily reporting and documentationRequired Skills:- Knowledge of Cat6 & OFC laying (OH, UG & IBD)- Basic understanding of IP addressing and networking- Ability to use OTDR, crimping tool, LAN tester, etc.- Willingness for pole climbing and ladder work- Good communication skills- Two-wheeler with valid license (mandatory). (4-Wheeler licence will be an added advantage)Qualification & Experience:- ITI / Diploma (Electronics / Electrical / Computer Networking / Telecom)- 1-5 years of relevant field experience

Nursing is a demanding profession that requires dedication and compassion towards patients. As a nurse, you will be responsible for providing direct patient care, administering medications, and collaborating with healthcare professionals to ensure the well-being of patients. Key responsibilities of a nurse include monitoring patients' vital signs, administering treatments and medications as prescribed by doctors, and providing emotional support to patients and their families. Nurses are also responsible for maintaining accurate patient records and communicating effectively with other healthcare team members.

Position OverviewThe Aircraft Mechanic / Aircraft Technician is responsible for performing maintenance, repair, inspection, and modification tasks on aircraft to ensure they are safe, airworthy, and fully operational. The role involves hands-on technical work, strict adherence to aviation regulations, and close coordination with engineers, quality inspectors, and flight crews to support efficient flight operations.Key Responsibilities Aircraft Maintenance & RepairPerform scheduled (A, B, C, D checks) and unscheduled maintenance on aircraft and components.Inspect, troubleshoot, and repair airframes, engines, hydraulic, pneumatic, fuel, and electrical systems.Carry out defect rectification, part replacement, and system testing as per maintenance manuals.Conduct routine inspections and ensure all work meets safety and airworthiness standards.Perform line maintenance and base maintenance activities according to daily operational needs.Support pre-flight and post-flight checks to ensure aircraft readiness. Technical & Diagnostic WorkDiagnose and repair mechanical and electrical malfunctions using testing equipment and manuals.Follow manufacturer and regulatory guidelines for maintenance tasks.Utilize specialized tools, precision instruments, and ground support equipment (GSE).Coordinate with engineers to ensure accurate troubleshooting and defect clearance.Ensure calibration and care of maintenance tools and test instruments. Documentation & ReportingRecord all maintenance activities in job cards, logbooks, and technical documents.Update maintenance tracking systems (e.g., AMOS, Trax, Ramco, or Rusada Envision).Ensure accurate documentation for all inspections, replacements, and modifications.Report component failures, delays, and discrepancies to supervisors or engineering teams.Maintain proper traceability of spares and materials used in maintenance. Safety & ComplianceComply with DGCA / FAA / EASA / CAR-145 safety and maintenance standards.Adhere to company safety management systems (SMS) and quality procedures.Follow proper lockout/tagout and hazardous materials handling procedures.Conduct work in accordance with approved maintenance data and aviation legislation.Ensure Foreign Object Damage (FOD) control and maintain a clean work environment. Team CoordinationWork collaboratively with engineers, quality control inspectors, and flight operations teams.Assist in training junior technicians or apprentices on maintenance practices.Communicate effectively with supervisors regarding progress and issues.Support quick turnaround during AOG (Aircraft on Ground) situations.Required Skills & CompetenciesExcellent technical and mechanical aptitude.Strong problem-solving and troubleshooting skills.Proficiency in using hand tools, torque wrenches, and diagnostic equipment.Sound understanding of aviation maintenance manuals and documentation.High level of attention to detail, accuracy, and discipline.Ability to work under pressure, at heights, and in outdoor conditions.Good communication and teamwork abilities.Educational QualificationDiploma / Degree in Aircraft Maintenance Engineering (AME) or Aeronautical Engineering.Certification from an approved training organization (DGCA / EASA / FAA Part-147).Valid AME license in relevant category (B1 Mechanical / B2 Avionics) preferred.Experience05 years of experience in aircraft maintenance, repair, or overhaul (MRO).Experience on specific aircraft types (e.g., Airbus A320, Boeing 737, ATR, Embraer) is an advantage.Fresher candidates with DGCA-approved AME training may also apply (for trainee roles).Working ConditionsWork performed in hangars, workshops, or ramp areas (day/night shifts).May involve rotational shifts, weekends, and emergency standby duties.Physically demanding role requiring manual handling, climbing, and precision work.

Aircraft Engineer Responsibilities:1. Design and develop aircraft components and systems using CAD software2. Conduct aircraft maintenance and repair tasks to ensure safe and efficient operation3. Perform engineering calculations and analysis to troubleshoot and resolve issues4. Collaborate with avionics technicians to integrate electrical and electronic systems5. Manage engineering tasks within project timelines and budget constraints6. Inspect and test aircraft systems to ensure compliance with regulatory standards

As an Aircraft Maintenance Engineer, your responsibilities will include conducting avionics and structural repairs, performing engine overhauls, troubleshooting aircraft systems, and ensuring the safe and efficient operation of aircraft. You will need to have strong technical ability, safety awareness, and excellent communication skills. Key skills required for this position include analytical thinking, problem-solving abilities, and proficiency with diagnostic equipment. You must also have a thorough understanding of aircraft systems and be able to effectively repair and maintain them.

Responsibilities:- Perform regular maintenance and repairs on aircraft to ensure they are functioning properly and safely- Troubleshoot and diagnose issues with aircraft systems and make necessary repairs- Conduct inspections and evaluations of aircraft to identify any potential problems or issues- Keep detailed records of all maintenance and repairs performed on aircraft- Follow all safety and maintenance procedures and regulations set by the aviation industry- Collaborate with other members of the maintenance team to ensure all work is completed efficiently and accurately

Key Responsibilities: LAN cable laying and RJ45 termination OFC laying (Overhead / Underground) and basic fiber splicing Installation & configuration of routers, switches, access points CCTV installation (DVR/NVR/IP cameras) OTDR testing, power meter testing, LAN testing Troubleshooting broadband and leased line (ILL) issues Daily reporting and documentationRequired Skills: Knowledge of Cat6 & OFC laying (OH, UG & IBD) Basic understanding of IP addressing and networking Ability to use OTDR, crimping tool, LAN tester, etc. Willingness for pole climbing and ladder work Good communication skills Two-wheeler with valid license (mandatory). (4-Wheeler licence will be an added advantage)Qualification & Experience: ITI / Diploma (Electronics / Electrical / Computer Networking / Telecom) 15 years of relevant field experience

Job SummaryThe Aircraft Maintenance Technician is responsible for inspecting, maintaining, troubleshooting, and repairing aircraft systems and components to ensure airworthiness, safety, and compliance with aviation regulations. The role requires strict adherence to maintenance procedures, safety standards, and accurate documentation. Key ResponsibilitiesPerform scheduled and unscheduled aircraft maintenance and inspectionsCarry out repair, replacement, and servicing of aircraft componentsTroubleshoot mechanical, electrical, and avionics issuesRead and interpret Aircraft Maintenance Manuals (AMM), IPC, SRMEnsure compliance with aviation safety standards and regulatory requirementsConduct pre-flight, transit, and post-flight checksUse appropriate tools, equipment, and diagnostic instrumentsMaintain accurate technical records and logbooksFollow SMS and Human Factors guidelinesCoordinate with engineers, supervisors, and quality teams Required Skills & CompetenciesStrong knowledge of aircraft systems (airframe, engine, avionics)Mechanical and technical troubleshooting skillsHigh level of attention to detailAbility to work under pressure and meet deadlinesGood communication and teamwork skillsFamiliarity with maintenance documentation systems (preferred) Education & QualificationAME / AMT course from an approved aviation instituteValid certification as per regulatory authority (where applicable)Type-rating on aircraft (preferred for experienced candidates)Freshers with strong technical fundamentals may apply Physical & Work RequirementsWillingness to work rotational shifts, nights, weekendsAbility to work in hangars, ramps, confined spacesPhysically fit to work at heights and outdoor conditions Safety & ComplianceStrict adherence to aviation safety regulationsProper use of PPE and safety equipmentImmediate reporting of safety hazards or defects

Join our team in Kochi/Cochin, India as an Aircraft Maintenance Technician. As part of our aviation industry, your key responsibilities will include inspecting, repairing, and maintaining aircraft systems. This role requires a 12th Pass education with 0-6 years of experience. Candidates should possess strong problem-solving skills, attention to detail, and the ability to work in a team environment. Experience working with aircraft systems and a thorough understanding of aviation regulations are essential. This full-time position will require you to work from the office. Apply today to be a part of our dynamic team!

Job SummaryThe Avionics Engineer is responsible for the design, development, testing, installation, and maintenance of aircraft electronic systems. This role ensures safe, efficient, and compliant operation of avionics equipment including communication, navigation, surveillance, and flight control systems. The engineer works closely with cross-functional teams to support system integration, troubleshooting, upgrades, and continuous improvement in aviation technology. Key ResponsibilitiesDesign & Development:Design, develop, and integrate avionics systems for aircraft and aerospace applications.Create system schematics, wiring diagrams, and interface control documents.Develop embedded software or hardware for avionics components.Testing & Troubleshooting:Conduct system testing, validation, calibration, and verification to ensure performance standards.Diagnose issues in avionics equipment using testing tools and propose corrective actions.Perform root cause analysis for system failures and implement preventive measures.Installation & Integration:Oversee installation and configuration of avionics systems in aircraft.Ensure seamless integration of avionics with electrical, mechanical, and flight control systems.Coordinate with manufacturing, maintenance, and flight operations teams for system implementation.Compliance & Documentation:Ensure compliance with aviation authorities (FAA, EASA, DGCA) and safety standards.Prepare technical reports, maintenance manuals, and certification documentation.Maintain accurate documentation of design changes, test results, and system configuration.Maintenance & Support:Support maintenance teams in periodic inspections, upgrades, repairs, and system checks.Provide engineering support for aircraft modifications, retrofits, and new product introductions. Required Skills & CompetenciesTechnical Skills:Strong knowledge of communication, navigation, surveillance, autopilot, and flight control systems.Expertise in embedded systems, digital/analog electronics, and circuit design.Hands-on experience with avionics protocols (e.g., ARINC 429, MIL-STD-1553, CAN bus).Proficiency in tools such as MATLAB/Simulink, LabVIEW, PSPICE, Altium, Xilinx, or similar.Knowledge of aviation standards DO-178C, DO-254, RTCA, FAA/EASA guidelines.Soft Skills:Analytical and problem-solving ability with strong attention to detail.Effective communication, teamwork, documentation, and time-management skills.Ability to work under pressure and meet strict deadlines. Education & Experience RequirementsBachelors degree in Avionics Engineering, Aerospace Engineering, Electronics & Communication, Electrical Engineering, or related field.(Preferred) Masters degree in Avionics or related specialization.Experience:Entry Level: 02 yearsMid-Level: 37 yearsSenior: 8+ years in avionics engineering or related aerospace domain Work EnvironmentMay require working in aircraft hangars, manufacturing facilities, laboratories, or test sites.Willingness to travel for project support, testing, and system installation.Must adhere to aviation safety regulations and workplace safety protocols. Job Type & CompensationFull-time / PermanentCompetitive salary based on experience and qualificationsBenefits: Health insurance, travel allowance, training & professional development

An Aircraft Maintenance Engineer (AME) is responsible for ensuring that aircraft are safe, airworthy, and ready for flight. They inspect, repair, maintain, and certify aircraft systems in compliance with aviation safety standards. Key ResponsibilitiesPerform routine inspections before and after flightsDiagnose and troubleshoot aircraft mechanical/electrical issuesRepair and replace faulty components (engines, hydraulics, avionics)Conduct scheduled maintenance checks (A, B, C, D checks)Maintain accurate maintenance logs and documentationEnsure compliance with aviation authorities like DGCACertify aircraft as airworthy for operationWork closely with pilots and ground staff Skills RequiredStrong knowledge of aircraft systems & engineering principlesAttention to detail and safety awarenessProblem-solving and troubleshooting skillsTechnical proficiency with tools and diagnostic equipmentTeamwork and communication skills Educational QualificationAME Course approved by DGCAOR Diploma/Degree in Aeronautical EngineeringLicensing is mandatory (Category B1/B2) Work EnvironmentAirports, hangars, maintenance basesShift-based work (including nights & weekends)Physically demanding and safety-critical role Salary (India Approx.)Fresher: 3 - 5 LPAExperienced: 6 - 15+ LPA

An Aircraft Maintenance Engineer (AME) is responsible for inspecting, repairing, and maintaining aircraft to ensure they are safe and airworthy. They check aircraft systems, perform routine maintenance, troubleshoot technical issues, and certify aircraft for flight according to aviation safety regulations.Key Responsibilities1. Aircraft InspectionConduct routine inspections of aircraft systems and components.Check engines, landing gear, hydraulic systems, and avionics equipment.Ensure the aircraft meets aviation safety standards and regulations.2. Maintenance and RepairsPerform preventive maintenance and repairs on aircraft components.Replace or repair faulty equipment such as engines, brakes, electrical systems, and navigation systems.Use specialized tools and diagnostic equipment for troubleshooting.3. System TestingTest aircraft systems including fuel systems, electrical systems, and flight controls.Verify that all systems function properly before flight operations.4. DocumentationMaintain detailed maintenance records and technical reports.Log all inspections, repairs, and modifications in maintenance documents.Ensure compliance with aviation authority regulations.5. Safety ComplianceFollow strict aviation safety procedures and standards.Ensure all maintenance work meets airline and regulatory requirements.Identify potential safety hazards and report them immediately.Required SkillsStrong technical and mechanical skillsKnowledge of aircraft systems and aviation regulationsAttention to detail and accuracyProblem-solving and troubleshooting abilityAbility to work in teams and under pressureEducational QualificationsDiploma or Degree in Aircraft Maintenance Engineering (AME) or Aeronautical EngineeringCertification approved by aviation authorities (such as DGCA in India)ExperienceFreshers can apply as trainee techniciansExperience in aircraft maintenance, mechanical engineering, or aviation industry is an advantagePhysical RequirementsGood eyesight and physical fitnessAbility to work in noisy environments and different weather conditionsCapability to handle tools and heavy equipmentWorking ConditionsWork in aircraft hangars, workshops, and airport maintenance areasMay involve night shifts, weekends, and emergency maintenance workExposure to mechanical equipment and aviation fuel

An Electrical Engineer is responsible for designing, developing, and testing electrical systems and equipment. They also oversee the installation and maintenance of electrical systems in buildings, aircraft, and other structures. Responsibilities of an Electrical Engineer may include:- Designing electrical systems and components- Testing and evaluating electrical systems- Troubleshooting and repairing electrical issues- Ensuring compliance with safety standards and regulations- Collaborating with other engineers and professionals on projects- Providing technical support and guidance to team members

We have vacant of 42 Urgent Hiring of Aircraft Maintenance at Airports Jobs in Mumbai, Kolkata, Goa, Visakhapatnam, Trivandrum/Thiruvananthapuram, Kozhikode/Calicut, Chennai, Kannur, Mangalore, Surat, for Freshers Educational Qualification : I.T.I., B.C.A, B.B.A, B.E, B.Tech, Other Bachelor Degree, Post Graduate Diploma, M.Tech, Integrated PG, Any Master Degree Skill Aircraft Maintenance, Aeronautical Engineer, Aviation, Aircraft Engineer, Aircraft Maintenance Engineer, Aircraft Technician, Electrical Engineer, Mechanical Engineer, Civil Engineer, Site Engineer, Project Engineer, Avionics etc.

We have vacant of 47 Jobs for Aeronautical Engineer at Aviation Industry Jobs in Mumbai, Visakhapatnam, Trivandrum/Thiruvananthapuram, Chennai, Vijayawada, Tiruchirappalli/Trichy, Ahmedabad, Imphal, Pune, Jammu, for Freshers Educational Qualification : I.T.I., B.E, B.Tech, Other Bachelor Degree, Post Graduate Diploma, M.Tech, Any Master Degree Skill Aeronautical Engineer, Aeronautical Analyst, Aeronautical, Aircraft Maintenance, Aircraft Maintenance Engineer, Aircraft Engineer, Electrical Engineer, Site Engineer, Mechanical Engineer, Aerospace Engineering, Aircraft Technician, Aircraft Mechanic etc.

Identify cases eligible for medical reviews and assign these to appropriate reviewers.Reach out to the client for any problems identified in the cases for review.Adhere to Utilization Review Accreditation Commission (URAC), jurisdictional, and/or established MediCall best practice UM time frames, as appropriate.Adhere to federal, state, URAC, client, and established MediCall best practice WCUM time frames, as appropriate.Develop a complete understanding of the Medical management Procedures.Perform medical review assessment (MRA) on utilization of health services (eg healthcare plans, workers compensation products etc) in an accurate, efficient and timely manner while ensuring compliance with utilization management regulations and adherence to state and federal mandates.Provide succinct negotiable points based on the submitted medical records that identify necessary medical treatment, casually related care, response or lack of response to treatment, etc.Identify missing records and information that are necessary in the completion of the medical review assessment.Adhere to Department of Labor, state and company timeframe requirements.Coordinates physician reviewer referral as needed and follows up timely to obtain and deliver those results.Track status of all utilization management reviews in progress and follow up on all pending cases.Work closely with management team in the ongoing development and implementation of utilization management programs.Respond to inbound telephone calls pertaining to medical reviews in a timely manner, following client a established protocols.Process customer calls consistent with program specified strategies and customer satisfaction measurements to include but not limited to proper answering procedure, eg opening and closing remarks.Learn new methods and services as the job requires.Ct:HR SHANMUGAPRIYA8072891550

We are seeking a skilled Physiotherapist to join our healthcare team. The primary responsibilities of this role include evaluating and treating patients with physical issues resulting from illness, injury, disability, or aging. The successful candidate will work with patients to develop treatment plans that promote mobility, reduce pain, and improve overall quality of life.Key Responsibilities:- Conducting patient assessments to determine treatment needs- Developing personalized treatment plans based on patient goals- Implementing treatment plans to improve mobility, reduce pain.

An Anesthetist is a medical professional responsible for administering anesthesia to patients during surgical procedures. Their main responsibilities include:- Evaluating patients' medical history to determine the safest and most effective anesthesia plan- Administering anesthesia before, during, and after surgical procedures- Monitoring patients' vital signs and adjusting anesthesia levels as needed- Managing pain relief during and after surgery- Collaborating with other medical professionals to ensure patient safety and comfort- Providing post-operative care and monitoring patients for