Fresher Technician Jobs

Job TitleAircraft Maintenance Engineer (AME)DepartmentAircraft Maintenance / EngineeringLocationsPuneMumbaiNagpurNashikShirdiGoaAmravatiAurangabadKolhapurNavi MumbaiSolapurJob SummaryAn Aircraft Maintenance Engineer (AME) is responsible for inspecting, maintaining, repairing, troubleshooting, and certifying aircraft to ensure they are safe, airworthy, and compliant with aviation regulations. The role involves carrying out scheduled and unscheduled maintenance on aircraft systems, engines, avionics, electrical components, hydraulic systems, landing gear, and structural components while adhering to the standards established by aviation authorities.Key ResponsibilitiesAircraft Inspection & MaintenancePerform routine, preventive, scheduled, and unscheduled aircraft maintenance.Conduct daily, transit, weekly, A-check, B-check, C-check, and heavy maintenance inspections.Inspect aircraft structures, fuselage, wings, landing gear, flight controls, and engines.Diagnose and rectify aircraft defects using approved maintenance procedures.Replace, repair, and overhaul defective aircraft components.Ensure all maintenance tasks are completed according to the Aircraft Maintenance Manual (AMM).Troubleshooting & RepairsIdentify mechanical, hydraulic, electrical, pneumatic, and avionics faults.Use specialized diagnostic tools and testing equipment.Repair aircraft systems while maintaining manufacturer specifications.Coordinate with engineering teams for complex technical issues.Perform functional tests after repairs to verify serviceability.Engine & Component MaintenanceInspect aircraft engines for wear, leaks, corrosion, and damage.Perform engine servicing, oil changes, filter replacement, and component inspections.Maintain propellers, Auxiliary Power Units (APU), and fuel systems.Monitor engine performance and recommend corrective actions.Avionics & Electrical SystemsInspect communication and navigation systems.Maintain radar, autopilot, cockpit instrumentation, and electrical wiring.Test aircraft electronic systems for operational reliability.Ensure compliance with avionics maintenance procedures.Documentation & ComplianceComplete maintenance logs, inspection reports, and defect records.Maintain aircraft technical documentation accurately.Ensure compliance with aviation regulatory authorities.Certify aircraft for return to service after maintenance (where appropriately licensed).Follow company maintenance policies and quality assurance procedures.Safety & Quality AssuranceFollow all aviation safety regulations and standard operating procedures.Maintain clean and organized work areas.Ensure proper use of Personal Protective Equipment (PPE).Report safety hazards and technical discrepancies immediately.Participate in safety audits and quality inspections.Team CoordinationWork closely with pilots, technicians, quality inspectors, and operations staff.Coordinate maintenance schedules with flight operations.Assist junior technicians with technical guidance and training.Participate in emergency aircraft recovery and AOG (Aircraft on Ground) support.Required QualificationsDiploma or Bachelor's Degree in Aircraft Maintenance Engineering, Aeronautical Engineering, Mechanical Engineering, or Aerospace Engineering.DGCA-approved AME qualification or equivalent aviation authority certification is preferred.Valid Aircraft Maintenance Engineer License (where applicable).Type rating on specific aircraft is an advantage.Relevant experience in aircraft maintenance is preferred.Required SkillsStrong knowledge of aircraft systems and maintenance procedures.Excellent troubleshooting and fault diagnosis skills.Knowledge of aviation regulations and airworthiness standards.Ability to interpret aircraft maintenance manuals and engineering drawings.Strong analytical and problem-solving abilities.Excellent attention to detail.Good communication and teamwork skills.Ability to work under pressure and meet strict deadlines.Computer proficiency in maintenance management software.Good technical documentation skills.Technical KnowledgeAircraft StructuresGas Turbine EnginesHydraulic SystemsPneumatic SystemsElectrical SystemsAvionics SystemsFlight Control SystemsLanding Gear SystemsFuel SystemsAircraft DocumentationMaintenance PlanningAircraft Safety StandardsPreferred CertificationsDGCA Aircraft Maintenance Engineer LicenseEASA Part-66 License (preferred internationally)ICAO-compliant aviation trainingHuman Factors TrainingSafety Management System (SMS) TrainingFuel Tank Safety TrainingEWIS (Electrical Wiring Interconnection System) TrainingAircraft Type Rating CertificationWorking ConditionsAirport hangars, maintenance bases, and line maintenance stations.Rotational shifts including nights, weekends, and public holidays.Outdoor work in varying weather conditions.Physically demanding work involving standing, climbing, bending, and lifting equipment.Exposure to aircraft noise, fuels, lubricants, and hydraulic fluids while following strict safety procedures.Salary Range (India)Fresher: 3.5 - 6 LPA2-5 Years: 6 - 10 LPA5-10 Years: 10 - 18 LPALicensed/Type-Rated AME: 15 - 30+ LPA (depending on airline, aircraft type, and experience)

As an MRI Radiographer, you will play a crucial role in patient care and diagnostic imaging. Your primary responsibilities will include:- Conducting MRI Scans: You will operate MRI machines to perform diagnostic imaging procedures on patients, ensuring high-quality images for accurate interpretation.- Patient Preparation: You will prepare patients for MRI exams by explaining the procedure, answering questions, and ensuring their comfort and safety throughout the process.- Equipment Maintenance: Regularly checking and maintaining MRI equipment to ensure it functions properly is vital to provide consistent and reliable imaging services.- Collaboration with Medical Team: You will work closely with physicians and other medical staff to discuss imaging results and provide insights for diagnosis and treatment planning.- Documentation: Accurately documenting patient information and scan results is essential for maintaining medical records and ensuring continuity of care.To excel in this role, candidates should possess:- A degree in a relevant field, such as B.Sc or MBBS, indicating a solid educational foundation in medical imaging and patient care.- Strong attention to detail and technical proficiency in MRI technology, ensuring adherence to safety standards and protocols during imaging.- Excellent communication skills to effectively interact with patients and the medical team, fostering a supportive and informative environment.- A dedication to patient care, demonstrating empathy and professionalism while handling individuals in various states of health. - Flexibility and adaptability to work various shifts, as MRI services may be required at different times.

Job DetailFreshers Roustabout For Offshore Project (Abu Dhabi) - FreshersOil / Gas / Petroleum Ajman, UAEInfoCandidatesPremium JobRe-Post JobDeleteRecommended SeekersIndustry : Oil / Gas / PetroleumKey Skills : Rigger, Roustabout, Petrochemical, Petroleum Engineer, BE Mechanical, Offshore, Offshore Platforms, Offshore Drilling, Diploma Trainee, Diploma Fitter, Diploma Engineer, Diploma Trainee Engineer, Diploma Mechanical Engineer,Function : Oil & FilterPositions : 350Experience : 0 - 4 Yrs.Salary : INR 1200000 - 2000000Additional Perks : Flexible Working Hours, Overtime Pay, Joining Bonus, Annual Bonus, Travel Allowance (TA), Petrol Allowance, Mobile Allowance, Internet Allowance, Health Insurance, Food/Meals, AccommodationLocation(s) of Job : Ajman, UAEQualification : Graduate (B.A, B.C.A, B.Com, B.Sc, B.Tech/B.E, Vocational Course, Professional Degree, Certificate/Diploma/Others)Gender Preference : MaleAge Limit : 18 - 40 Yrs.Hiring For : Own CompanyType of interview : TelephonicDESCRIPTIONAs a Roustabout, you will play an essential role in supporting operations in the oil and gas industry. Your primary focus will be on maintaining a clean and safe work area, as well as assisting with various tasks on site.Key Responsibilities:- Maintaining Equipment: Assist in the upkeep and cleaning of tools and machinery to ensure they are in good working condition, which helps to prevent accidents and delays.- Loading and Unloading Supplies: Help in the movement of equipment and materials to and from the worksite, ensuring that everything is handled safely and efficiently.- Cleaning Work Areas: Regularly clean and organize workspaces, which contributes to a safe and tidy environment for all workers.- Assisting Technicians: Work alongside skilled professionals to support their tasks, gaining hands-on experience and understanding of the job.- Observing Safety Protocols: Follow all safety regulations and procedures to protect yourself and your coworkers from hazards on the job site.Required Skills and Expectations:- Team Player: Ability to work well with others and communicate effectively, as collaboration is crucial in the workplace.- Physical Fitness: Must be able to perform physical tasks, such as lifting heavy objects and standing for long periods.- Basic Technical Knowledge: Familiarity with basic tools and their uses is beneficial, even if you are new to the field.- Adaptable and Willing to Learn: An eagerness to take on new tasks and learn from experienced colleagues will help you grow in this role.- Attention to Detail: Be observant and conscientious about following instructions and maintaining safety.

I AM SARBESWAR JENA CEO/FOUNDER OF HIMALAYAN REFRIGERATION, STATION ROAD ANGUL. THE HIMALAYAN REFRIGERATION ANGUL IS AN AUTHORIZED SERVICE CENTER OF HOME APPLIANCE AND ELECTRONICS THE COMPANY WAS TIED UP WITH MULTIPLE REPUTED COMPANIES LIKE GODREJ,USHA,PRESTIGE,PANASONIC ,LUMINOUS AND MANY MORE.THE PURPOSE OF APPLICATION IS HIMALAYAN REFRIGERATION NEED OF CANDIDATE AROUND OF 100, ALL THE CANDIDATES WHO HAVE BEEN COMPLETED 10TH, 12TH, ITI OR DIPLOMA.HIMALAYAN REFRIGERATION IS RUNNING ABOUT OF 30 YEARS AND LIKE THIS WE'VE HELPED SO MANY CANDIDATES TO GET JOB ON GOOD INDUSTRIES I REQUEST TO YOU PLEASE ARRANGE FOR JOB DRIVE AT ALL OVER ORISSA INDIVIDUALLY AT HIS OWN INSTITUTE FOR RAC,MOTOR WINDING ELECTRICAL S AND COMPUTER TRADES OR ANY TRADES CANDIDATES INTERESTED CAN ATTEND THE JOB DRIVE PLEASE SIR COMMUNICATE TO ME WHEN AND WHERE I WILL DRIVE I AM ALWAYS READY.FACILITIES TO BE PROVIDED:-UNSKILLED CANDIDATE HAVE TO TAKEN TRAINING FOR 10 MONTHSDURING TRAINING PERIOD THEY WILL GET SELF EXPENDITURE 1-MINIMUM PERSONAL EXPENDITURE Rs 80002-MONTHLY SALARY =15000 (100% JOB COMPLIED)AND3-15000 -25000 INTENSIVE WILL PROVIDED EXTRA4-ACCORDING COMPLETE JOB PERCENTS SALARY WILL VARIABLE5-SHARE BASIC ACCOMMODATION6-CANDIDATE HAVE OWN BIKE WITH DL 7-FUEL AND BIKE MAINTENANCE WILL PROVIDED8-INSURANCE WILL GIVEN9-CANDIDATE HAVE TO REPAIR AC AND HOME APPLIANCES AT FIELD COVERS ANGUL DISTAFTER COMPLETE THE TRAINEES CANDIDATES HAS TO CONTINUE MINIMUM ONE YEAR ON HIS RESPECTIVE JOB WITH SALARY 15000-25000.10-CANDIDATE SHOULD HAVE GOOD MANNER AND DISCIPLINESRegards...SARBESWAR JENAHIMALAYAN REFRIGERATIONANGUL,ODISHAPIN - 759122Ph No - 9437903195,9337844110

Key Responsibilities & DutiesDesign, Modeling & Technical Documentation:Create precise 3D models, assemblies, and 2D manufacturing drawings using CAD software (e.g., AutoCAD, SolidWorks, or Creo). Perform engineering calculations, stress analysis, and thermal/fluid evaluations to validate design performance and safety. Prepare Bill of Materials (BOMs), engineering specifications, and technical documentation for production and procurement teams. Manufacturing Support & Process Optimization:Oversee the fabrication, machining, assembly, and testing of mechanical parts or machinery to ensure strict adherence to design specifications. Apply Design for Manufacturability (DFM) and Lean/5S principles to reduce production waste, scrap, and manufacturing costs. Monitor equipment performance, identify root causes of mechanical failures, and implement corrective or preventive actions (CAPA). Testing, Quality & Maintenance:Plan and execute prototype testing, trial runs, and quality inspections using precision measuring instruments. Coordinate and supervise preventive and corrective maintenance schedules for plant machinery, utilities, and tools. Ensure 100% compliance with local factory rules, safety regulations (EHS), and ISO/ASME quality standards.

We are seeking a motivated Field Service Engineer to join our team in Bangalore. This entry-level position is ideal for candidates with an I.T.I. qualification who are eager to start their careers in the engineering field. The role involves ensuring that equipment is installed and maintained to meet customer satisfaction.Key Responsibilities:1. Installation and Setup: You will be responsible for setting up and installing equipment at client locations, ensuring everything is operational and meets quality standards.2. Maintenance and Repair: Conduct regular maintenance checks and perform necessary repairs on equipment to prevent malfunctions and extend the lifespan of devices.3. Customer Support: Provide excellent customer service, addressing any technical issues and answering client queries to ensure a smooth experience.4. Documentation: Maintain accurate records of service operations, including installation details and maintenance logs, to keep track of all activities.5. Collaboration: Work closely with your team and other departments to ensure that service goals and customer expectations are met.Required Skills and Expectations:Candidates should possess strong problem-solving abilities and technical skills related to equipment maintenance. Good communication skills are essential for interacting with clients and addressing their needs effectively. A willingness to learn and adapt to new technologies is important, as is the ability to work as part of a team. A clean driving record and readiness to travel for field service tasks may also be required.

Job TitleAircraft Maintenance Engineer (AME)DepartmentAircraft Maintenance / EngineeringLocationsGuwahatiImphalKolkataAizwalItanagarTezuJorhatSilcharShillongDimapurGangtokAgartalaJob SummaryAn Aircraft Maintenance Engineer (AME) is responsible for inspecting, maintaining, repairing, troubleshooting, and certifying aircraft to ensure they are safe, airworthy, and compliant with aviation regulations. The role involves carrying out scheduled and unscheduled maintenance on aircraft systems, engines, avionics, electrical components, hydraulic systems, landing gear, and structural components while adhering to the standards established by aviation authorities.Key ResponsibilitiesAircraft Inspection & MaintenancePerform routine, preventive, scheduled, and unscheduled aircraft maintenance.Conduct daily, transit, weekly, A-check, B-check, C-check, and heavy maintenance inspections.Inspect aircraft structures, fuselage, wings, landing gear, flight controls, and engines.Diagnose and rectify aircraft defects using approved maintenance procedures.Replace, repair, and overhaul defective aircraft components.Ensure all maintenance tasks are completed according to the Aircraft Maintenance Manual (AMM).Troubleshooting & RepairsIdentify mechanical, hydraulic, electrical, pneumatic, and avionics faults.Use specialized diagnostic tools and testing equipment.Repair aircraft systems while maintaining manufacturer specifications.Coordinate with engineering teams for complex technical issues.Perform functional tests after repairs to verify serviceability.Engine & Component MaintenanceInspect aircraft engines for wear, leaks, corrosion, and damage.Perform engine servicing, oil changes, filter replacement, and component inspections.Maintain propellers, Auxiliary Power Units (APU), and fuel systems.Monitor engine performance and recommend corrective actions.Avionics & Electrical SystemsInspect communication and navigation systems.Maintain radar, autopilot, cockpit instrumentation, and electrical wiring.Test aircraft electronic systems for operational reliability.Ensure compliance with avionics maintenance procedures.Documentation & ComplianceComplete maintenance logs, inspection reports, and defect records.Maintain aircraft technical documentation accurately.Ensure compliance with aviation regulatory authorities.Certify aircraft for return to service after maintenance (where appropriately licensed).Follow company maintenance policies and quality assurance procedures.Safety & Quality AssuranceFollow all aviation safety regulations and standard operating procedures.Maintain clean and organized work areas.Ensure proper use of Personal Protective Equipment (PPE).Report safety hazards and technical discrepancies immediately.Participate in safety audits and quality inspections.Team CoordinationWork closely with pilots, technicians, quality inspectors, and operations staff.Coordinate maintenance schedules with flight operations.Assist junior technicians with technical guidance and training.Participate in emergency aircraft recovery and AOG (Aircraft on Ground) support.Required QualificationsDiploma or Bachelor's Degree in Aircraft Maintenance Engineering, Aeronautical Engineering, Mechanical Engineering, or Aerospace Engineering.DGCA-approved AME qualification or equivalent aviation authority certification is preferred.Valid Aircraft Maintenance Engineer License (where applicable).Type rating on specific aircraft is an advantage.Relevant experience in aircraft maintenance is preferred.Required SkillsStrong knowledge of aircraft systems and maintenance procedures.Excellent troubleshooting and fault diagnosis skills.Knowledge of aviation regulations and airworthiness standards.Ability to interpret aircraft maintenance manuals and engineering drawings.Strong analytical and problem-solving abilities.Excellent attention to detail.Good communication and teamwork skills.Ability to work under pressure and meet strict deadlines.Computer proficiency in maintenance management software.Good technical documentation skills.Technical KnowledgeAircraft StructuresGas Turbine EnginesHydraulic SystemsPneumatic SystemsElectrical SystemsAvionics SystemsFlight Control SystemsLanding Gear SystemsFuel SystemsAircraft DocumentationMaintenance PlanningAircraft Safety StandardsPreferred CertificationsDGCA Aircraft Maintenance Engineer LicenseEASA Part-66 License (preferred internationally)ICAO-compliant aviation trainingHuman Factors TrainingSafety Management System (SMS) TrainingFuel Tank Safety TrainingEWIS (Electrical Wiring Interconnection System) TrainingAircraft Type Rating CertificationWorking ConditionsAirport hangars, maintenance bases, and line maintenance stations.Rotational shifts including nights, weekends, and public holidays.Outdoor work in varying weather conditions.Physically demanding work involving standing, climbing, bending, and lifting equipment.Exposure to aircraft noise, fuels, lubricants, and hydraulic fluids while following strict safety procedures.Salary Range (India)Fresher: 3.5 - 6 LPA2-5 Years: 6 - 10 LPA5-10 Years: 10 - 18 LPALicensed/Type-Rated AME: 15 - 30+ LPA (depending on airline, aircraft type, and experience)

Job TitleAircraft Maintenance Engineer (AME)DepartmentAircraft Maintenance / EngineeringLocationsBangaloreMangaloreBelagaviBallariBidarHubliKalaburgiKoppalMysoreShivamoggaJob SummaryAn Aircraft Maintenance Engineer (AME) is responsible for inspecting, maintaining, repairing, troubleshooting, and certifying aircraft to ensure they are safe, airworthy, and compliant with aviation regulations. The role involves carrying out scheduled and unscheduled maintenance on aircraft systems, engines, avionics, electrical components, hydraulic systems, landing gear, and structural components while adhering to the standards established by aviation authorities.Key ResponsibilitiesAircraft Inspection & MaintenancePerform routine, preventive, scheduled, and unscheduled aircraft maintenance.Conduct daily, transit, weekly, A-check, B-check, C-check, and heavy maintenance inspections.Inspect aircraft structures, fuselage, wings, landing gear, flight controls, and engines.Diagnose and rectify aircraft defects using approved maintenance procedures.Replace, repair, and overhaul defective aircraft components.Ensure all maintenance tasks are completed according to the Aircraft Maintenance Manual (AMM).Troubleshooting & RepairsIdentify mechanical, hydraulic, electrical, pneumatic, and avionics faults.Use specialized diagnostic tools and testing equipment.Repair aircraft systems while maintaining manufacturer specifications.Coordinate with engineering teams for complex technical issues.Perform functional tests after repairs to verify serviceability.Engine & Component MaintenanceInspect aircraft engines for wear, leaks, corrosion, and damage.Perform engine servicing, oil changes, filter replacement, and component inspections.Maintain propellers, Auxiliary Power Units (APU), and fuel systems.Monitor engine performance and recommend corrective actions.Avionics & Electrical SystemsInspect communication and navigation systems.Maintain radar, autopilot, cockpit instrumentation, and electrical wiring.Test aircraft electronic systems for operational reliability.Ensure compliance with avionics maintenance procedures.Documentation & ComplianceComplete maintenance logs, inspection reports, and defect records.Maintain aircraft technical documentation accurately.Ensure compliance with aviation regulatory authorities.Certify aircraft for return to service after maintenance (where appropriately licensed).Follow company maintenance policies and quality assurance procedures.Safety & Quality AssuranceFollow all aviation safety regulations and standard operating procedures.Maintain clean and organized work areas.Ensure proper use of Personal Protective Equipment (PPE).Report safety hazards and technical discrepancies immediately.Participate in safety audits and quality inspections.Team CoordinationWork closely with pilots, technicians, quality inspectors, and operations staff.Coordinate maintenance schedules with flight operations.Assist junior technicians with technical guidance and training.Participate in emergency aircraft recovery and AOG (Aircraft on Ground) support.Required QualificationsDiploma or Bachelor's Degree in Aircraft Maintenance Engineering, Aeronautical Engineering, Mechanical Engineering, or Aerospace Engineering.DGCA-approved AME qualification or equivalent aviation authority certification is preferred.Valid Aircraft Maintenance Engineer License (where applicable).Type rating on specific aircraft is an advantage.Relevant experience in aircraft maintenance is preferred.Required SkillsStrong knowledge of aircraft systems and maintenance procedures.Excellent troubleshooting and fault diagnosis skills.Knowledge of aviation regulations and airworthiness standards.Ability to interpret aircraft maintenance manuals and engineering drawings.Strong analytical and problem-solving abilities.Excellent attention to detail.Good communication and teamwork skills.Ability to work under pressure and meet strict deadlines.Computer proficiency in maintenance management software.Good technical documentation skills.Technical KnowledgeAircraft StructuresGas Turbine EnginesHydraulic SystemsPneumatic SystemsElectrical SystemsAvionics SystemsFlight Control SystemsLanding Gear SystemsFuel SystemsAircraft DocumentationMaintenance PlanningAircraft Safety StandardsPreferred CertificationsDGCA Aircraft Maintenance Engineer LicenseEASA Part-66 License (preferred internationally)ICAO-compliant aviation trainingHuman Factors TrainingSafety Management System (SMS) TrainingFuel Tank Safety TrainingEWIS (Electrical Wiring Interconnection System) TrainingAircraft Type Rating CertificationWorking ConditionsAirport hangars, maintenance bases, and line maintenance stations.Rotational shifts including nights, weekends, and public holidays.Outdoor work in varying weather conditions.Physically demanding work involving standing, climbing, bending, and lifting equipment.Exposure to aircraft noise, fuels, lubricants, and hydraulic fluids while following strict safety procedures.Salary Range (India)Fresher: 3.5 - 6 LPA2-5 Years: 6 - 10 LPA5-10 Years: 10 - 18 LPALicensed/Type-Rated AME: 15 - 30+ LPA (depending on airline, aircraft type, and experience)

Job TitleAircraft Maintenance Engineer (AME)DepartmentAircraft Maintenance / EngineeringLocationsChennaiJob SummaryAn Aircraft Maintenance Engineer (AME) is responsible for inspecting, maintaining, repairing, troubleshooting, and certifying aircraft to ensure they are safe, airworthy, and compliant with aviation regulations. The role involves carrying out scheduled and unscheduled maintenance on aircraft systems, engines, avionics, electrical components, hydraulic systems, landing gear, and structural components while adhering to the standards established by aviation authorities.Key ResponsibilitiesAircraft Inspection & MaintenancePerform routine, preventive, scheduled, and unscheduled aircraft maintenance.Conduct daily, transit, weekly, A-check, B-check, C-check, and heavy maintenance inspections.Inspect aircraft structures, fuselage, wings, landing gear, flight controls, and engines.Diagnose and rectify aircraft defects using approved maintenance procedures.Replace, repair, and overhaul defective aircraft components.Ensure all maintenance tasks are completed according to the Aircraft Maintenance Manual (AMM).Troubleshooting & RepairsIdentify mechanical, hydraulic, electrical, pneumatic, and avionics faults.Use specialized diagnostic tools and testing equipment.Repair aircraft systems while maintaining manufacturer specifications.Coordinate with engineering teams for complex technical issues.Perform functional tests after repairs to verify serviceability.Engine & Component MaintenanceInspect aircraft engines for wear, leaks, corrosion, and damage.Perform engine servicing, oil changes, filter replacement, and component inspections.Maintain propellers, Auxiliary Power Units (APU), and fuel systems.Monitor engine performance and recommend corrective actions.Avionics & Electrical SystemsInspect communication and navigation systems.Maintain radar, autopilot, cockpit instrumentation, and electrical wiring.Test aircraft electronic systems for operational reliability.Ensure compliance with avionics maintenance procedures.Documentation & ComplianceComplete maintenance logs, inspection reports, and defect records.Maintain aircraft technical documentation accurately.Ensure compliance with aviation regulatory authorities.Certify aircraft for return to service after maintenance (where appropriately licensed).Follow company maintenance policies and quality assurance procedures.Safety & Quality AssuranceFollow all aviation safety regulations and standard operating procedures.Maintain clean and organized work areas.Ensure proper use of Personal Protective Equipment (PPE).Report safety hazards and technical discrepancies immediately.Participate in safety audits and quality inspections.Team CoordinationWork closely with pilots, technicians, quality inspectors, and operations staff.Coordinate maintenance schedules with flight operations.Assist junior technicians with technical guidance and training.Participate in emergency aircraft recovery and AOG (Aircraft on Ground) support.Required QualificationsDiploma or Bachelor's Degree in Aircraft Maintenance Engineering, Aeronautical Engineering, Mechanical Engineering, or Aerospace Engineering.DGCA-approved AME qualification or equivalent aviation authority certification is preferred.Valid Aircraft Maintenance Engineer License (where applicable).Type rating on specific aircraft is an advantage.Relevant experience in aircraft maintenance is preferred.Required SkillsStrong knowledge of aircraft systems and maintenance procedures.Excellent troubleshooting and fault diagnosis skills.Knowledge of aviation regulations and airworthiness standards.Ability to interpret aircraft maintenance manuals and engineering drawings.Strong analytical and problem-solving abilities.Excellent attention to detail.Good communication and teamwork skills.Ability to work under pressure and meet strict deadlines.Computer proficiency in maintenance management software.Good technical documentation skills.Technical KnowledgeAircraft StructuresGas Turbine EnginesHydraulic SystemsPneumatic SystemsElectrical SystemsAvionics SystemsFlight Control SystemsLanding Gear SystemsFuel SystemsAircraft DocumentationMaintenance PlanningAircraft Safety StandardsPreferred CertificationsDGCA Aircraft Maintenance Engineer LicenseEASA Part-66 License (preferred internationally)ICAO-compliant aviation trainingHuman Factors TrainingSafety Management System (SMS) TrainingFuel Tank Safety TrainingEWIS (Electrical Wiring Interconnection System) TrainingAircraft Type Rating CertificationWorking ConditionsAirport hangars, maintenance bases, and line maintenance stations.Rotational shifts including nights, weekends, and public holidays.Outdoor work in varying weather conditions.Physically demanding work involving standing, climbing, bending, and lifting equipment.Exposure to aircraft noise, fuels, lubricants, and hydraulic fluids while following strict safety procedures.Salary Range (India)Fresher: 3.5 - 6 LPA2-5 Years: 6 - 10 LPA5-10 Years: 10 - 18 LPALicensed/Type-Rated AME: 15 - 30+ LPA (depending on airline, aircraft type, and experience)

As a Mechanical Engineer, you will be involved in the design, analysis, and improvement of mechanical systems. You will work in a collaborative environment, contributing to various projects in Germany.Key Responsibilities:- Design Engineering: Create detailed designs for mechanical systems and components using CAD software. This includes developing specifications and ensuring designs meet project requirements.- Testing and Evaluation: Conduct testing on prototypes to assess their performance and efficiency. This involves analyzing results and making necessary adjustments to improve designs.- Project Collaboration: Work closely with cross-functional teams, including electrical engineers and product managers, to ensure seamless integration of all system components.- Problem Solving: Identify and troubleshoot issues in existing mechanical systems. Use analytical skills to develop effective solutions to enhance system performance.- Documentation: Maintain accurate documentation of design processes, changes, and test results. This ensures project transparency and compliance with industry standards.Required Skills and Expectations:You should have a Bachelors degree in Mechanical Engineering or a related field. Strong problem-solving abilities and analytical thinking are essential for this role. Proficiency in CAD software is important for design tasks. Good communication skills will help you collaborate effectively with team members. A foundational understanding of mechanical systems and a willingness to learn is expected. You should also be capable of working independently and managing your time efficiently to meet project deadlines.

Job DescriptionVisa duration- 12 months to 3 yearsFree medical and education facilities for familyFamily visaGovt sponsored visaSpouse can legally workSelection on first cum first basisA medical coder translates healthcare diagnoses, procedures, and services from patient records into standardized, alphanumeric codes (ICD-10, CPT, HCPCS)

Visa duration- 12 months to 3 yearsFree medical and education facilities for familyFamily visaGovt sponsored visaSpouse can legally workSelection on first cum first basisClients should have sufficient funds to sustain in the countryFree medical insurance.Fast process

DESCRIPTIONJob descriptionTeam member - Drilling Responsibilities The role is responsible for supporting Drilling & Completion (D&C) offshore activities, encompassing the planning, execution, and delivery of offshore exploratory and development drilling operations. The position contributes to ensuring technical integrity, operational safety, and execution efficiency across all offshore drilling activities. The role involves managing and mentoring a team of engineers, coordinating closely with subsurface, completion, and other crossfunctional teams, and providing technical oversight throughout the well lifecycle. A key responsibility includes ensuring strict compliance with HSSE standards, optimizing well designs, and driving continuous improvement in contractor performance and operational outcomes. This position requires a strong technical foundation in well engineering and offshore drilling operations, coupled with proven leadership, communication, and stakeholdermanagement capabilities, to effectively deliver safe, efficient, and costeffective offshore wells. HSSE Leadership: Exhibit a strong personal commitment to HSSE by setting an example and fostering a safety-first culture. Ensuring that all D&C activities are conducted in accordance with the highest level of safety and environmental standards. Drilling Engineering and Operations Management: Support and supervise the technical integrity and assurance of well designs, ensuring full integration between subsurface and wells teams during planning. Collaborate with the subsurface team to develop and maintain the Drilling Basis of Design (BoD). Conduct front-end planning for development wells, optimizing well designs, casing, cementing, and fluid programs. Perform technical risk assessments, contingency planning, and develop mitigation strategies for all drilling activities. Evaluate existing well designs and recommend optimizations to enhance operational efficiency. Lead and coordinate the execution of offshore drilling operations. Ensure comprehensive delivery of detailed field development drilling engineering. Cost and Resource Management: Prepare cost estimates for drilling projects. Review and optimize the Schedule of Rates and drilling programs. Contracting & Vendor Management: Oversee the entire contracting process, from preparing scopes of work to selecting rigs, well equipment, and services. Ensure alignment of all technical elements and commercial recommendations with the company's operational goals. Serving as the primary contact for well planning issues and contractor coordination. Lead contractor performance management, ensuring high standards from rigs, equipment, and well service providers. Team Leadership & Coordination: Manage and mentor a team of drilling engineers, providing guidance and technical authority throughout drilling operations. Ensure seamless coordination between in-house technical support and external drilling service providers. Regulatory & Audit Compliance: Ensure that drilling operations adhere to national and international regulations and standards. Participate in audits of rig/well sites and service bases to ensure compliance with international standards. Reporting & Stakeholder Management: Prepare and present regular reports on drilling operations, cost estimates, and project progress to senior management. Communicate with key internal and external stakeholders to ensure alignment of operational objectives. Qualifications Must: Master's or bachelor's degree within Petroleum Engineering 8-12 years of relevant work experience Demonstrated business acumen and abilities to lead teams Demonstrated experience dealing with suppliers and/or customers Excellent written and verbal communications skills Work experience in a multicultural and changing environment.

DESCRIPTIONWe are looking for a dedicated and hardworking Roustabout to join our team in Saudi Arabia. As a Roustabout, you will play a crucial role in supporting various operations, ensuring that tasks are completed safely and efficiently.Key Responsibilities:- Assist with Rig Operations: Support the rig crew in setting up, maintaining, and dismantling equipment used in drilling operations. This includes handling tools and materials needed for efficient workflow.- General Maintenance: Help with the upkeep of the work site and equipment to ensure a safe and clean environment. This involves cleaning decks, managing waste, and performing minor repairs as needed.- Material Handling: Load and unload equipment and supplies, ensuring that all items are transported safely and securely to the proper locations on site.- Safety Compliance: Follow safety procedures and guidelines to ensure personal safety and the safety of others on the site. This includes wearing appropriate safety gear and participating in safety drills.- Team Cooperation: Work closely with other crew members, showing teamwork and communication skills to ensure tasks are completed effectively and on time.Required Skills and Expectations:- Must have completed at least the 12th grade education.- Strong physical stamina and fitness, as the job involves manual labor and working in various weather conditions.- Willingness to learn and follow instructions from supervisors.- Basic understanding of safety practices in industrial environments is a plus.- Positive attitude and ability to work in a team-oriented environment.- Must be male, as per job requirements.

As a Field Service Engineer based in Mysore, you will be responsible for providing technical support and solutions at customer locations. You will handle installation, maintenance, and repair of equipment while ensuring high levels of customer satisfaction.Key Responsibilities:- Installation of Equipment: You will set up and install machinery at client sites according to specifications, ensuring they are operational and meet safety standards.- Maintenance and Repair: Regularly conduct preventative maintenance and emergency repairs on equipment, minimizing downtime for clients.- Troubleshooting: Identify issues with equipment using diagnostic tools and provide effective solutions to restore functioning.- Customer Support: Communicate with clients to understand their needs and explain technical issues clearly, ensuring they feel supported throughout the service process.- Documentation: Maintain accurate records of service visits, repairs, and customer feedback to inform future actions and improvements.Required Skills and Expectations:Candidates should possess a strong foundation in technical skills, preferably with an I.T.I. certification. You are expected to have excellent problem-solving abilities and a hands-on approach to repairing equipment. Good communication skills are essential for interacting with customers effectively. A willingness to learn new technologies and a proactive attitude are important. Additionally, since this role is for male candidates, applicants should be prepared for possible travel to client sites and flexible working hours to meet customer needs.

Molecular Biology Lab Assistant- Conduct laboratory experiments and research activities according to established protocols.Perform sample preparation, testing, analysis, and documentation.Apply techniques such as PCR, DNA/RNA extraction, electrophoresis, microscopy, and cell culture, depending on the role.Maintain laboratory equipment, reagents, samples, and records.Analyze and interpret experimental data and prepare reports.Follow laboratory safety, quality-control, and regulatory procedures.Assist in research projects involving genetics, molecular biology, biotechnology, or healthcare applications.Review scientific literature and stay updated on relevant technologies and research.Collaborate with researchers, clinicians, laboratory technicians, and other scientific teams.Support preparation of technical reports, presentations, research documentation, and publications.

Key Responsibilities:Prepare and arrange the operation theatre before surgical procedures.Ensure the availability, cleanliness, sterilization, and proper functioning of surgical instruments and equipment.Assist surgeons, anesthesiologists, and OT nurses during surgical procedures as required.Maintain aseptic techniques and sterile conditions in the operation theatre.Handle, arrange, and transfer surgical instruments safely.Check the functionality of anesthesia equipment, monitors, suction apparatus, and other OT equipment within the assigned scope.Ensure the availability of surgical supplies, consumables, and emergency equipment.Follow infection prevention, biomedical waste management, and hospital safety protocols.Required Skills:Knowledge of surgical instruments and operation theatre procedures.Understanding of aseptic techniques and infection control.Familiarity with OT equipment and sterilization methods.Good communication and teamwork skills.Attention to detail and organizational skills.Ability to work effectively in emergency and high-pressure situations.Commitment to patient safety and professional ethics.

We are seeking a motivated Home Appliance Technician to join our team in Angul, India. This full-time position is suitable for individuals with 0 to 2 years of experience and requires at least a 10th-grade education. nnAs a Home Appliance Technician, you will be responsible for diagnosing and repairing various household appliances. Your key responsibilities will include:nn1. Appliance Repair: Troubleshoot and fix issues with home appliances such as refrigerators, washing machines, and microwaves.n2. Installation Services: Install new appliances and ensure they function correctly and safely.n3. Customer Service: Interact with customers to understand their appliance issues and provide effective solutions.n4. Maintenance Checks: Perform regular maintenance on appliances to prevent potential problems and extend their life.nnTo be successful in this role, you should have a solid understanding of electrical systems and mechanical devices. Strong problem-solving skills and the ability to work independently are essential. You must also communicate effectively with customers and demonstrate a strong commitment to safety. A valid driver's license may be required for travel to customer locations. nnIf you are a dedicated and detail-oriented individual with a passion for home appliance repair and maintenance, we encourage you to apply and join our team.