Quality Implementation Jobs

Manage the Quality Department and ensure compliance with AS9100D and customer requirements.Oversee incoming, in-process, and final inspections.Handle customer complaints, rejections, root cause analysis, and corrective actions.Manage internal audits, customer audits, and certification audits.Ensure compliance with GD&T, FAIR (AS9102), FOD prevention, and calibration requirements.Lead Quality Engineers, Inspectors, and CMM personnel.Monitor supplier quality and implement continuous improvement initiatives.Coordinate with Production, NPD, and other departments to improve product quality.

Responsible for overseeing and managing all aspects of quality control operations within the laboratory unit. The primary goal of this role is to ensure that all laboratory activities, processes, and products meet the highest standards of quality, safety,and compliance with industry regulations. This role involves overseeing testing, inspection, auditing, and the implementation of corrective actions to ensure that quality benchmarks are consistently met.Main DutiesRegulatory Affairs Ensure regulatory compliance India CDSCO / Pharmacopeia, FDA regulations / ISO 9000 and others as applicableQuality Systems. Perform internal audits of Quality System according to Indian and US FDA's Quality System Requirements, ISO 9001 or any other quality standard deemednecessary.Participate in external audits, including supplier audits, customer audits and inspections by Indian and FDA's agencies and ISO Notifying Body.Conducting periodical evaluation of Suppliers and supplier development. Prepare documents and data for different Supplier/ contractor for audits as neededSubmit reports from internal and external audits to appropriate personnel and initiate audit follow up actions, to include Corrective and Preventive Actions where applicable.Provide support in development of QMS procedures, instructions and forms while ensuring continuous improvement of quality management system. Participate in implementing CAPA actions where neededManage and maintain all aspects of the Quality System, including Change Control; CAPA; Customer Complaints and ComplianceFile complaints to vendors; initiate corrective action requests; assess suppliers' CAPA reports; participate in suppliers' auditing and qualification process.Quality/Regulatory GeneralPerform function of Official Correspondent in front of the FDA and other government authorities.Review and draft new business Quality Agreements.Supervise, coach, and develop all quality employees.Mentor, train, and recommend qualified employees for advancement.Perform the responsibilities of Quality Control Manager during his/her absence.Adhere to safety and security policies; participate in safety and security training and improvement projectsReport unsafe or unhealthy conditions and assist with emergency or investigative situations related to areas of responsibilityQuality AssuranceMaintain all controlled document files and test records in a timely and accurate manner.Maintain updated matrix of records; maintain backup copies of required records and archive.Participate in the qualification of packing processes and software validation as required.Coordinate associated training activities for the company: develop training matrix for every position and annual/semi-annual training plans, initiate training requests, perform trainings, and maintain training recordsDevelop comprehensive Quality and Regulatory training programs for all employees.Make written procedures for identification, documentation, appropriate review and approval of RM, specifications, analytical methods, facilities, support systems, equipment, processing steps, labeling and packaging materials and computer software.Written procedures shall be established assigning responsibility for sanitation and describing the cleaning schedules, methods, equipment, and materials to be used in cleaning buildings and facilitiesEnsures written procedures for all activities carried out, are established and followedEnsures personnel shall practice good sanitation and health habits appropriate measures shall be established and implemented to prevent cross-contamination from personnel and materials moving from one dedicated area to anotherEnsures there are written procedures describing in detail the receipt, identification, storage, handling, sampling, testing and approval or rejection of raw material containers and closures and these procedures are followedReviewing completed laboratory control records of critical process steps before release of the material.Reviewing and approving validation protocols and reportsEnsuring data protection shall be established for all computerized systemsCheck records of different departments as needed for auditsValidation of general, cleaning, analytical methods, in-process control, test procedures, computerized systems and persons responsible for design, review, approval and documentation of each validation phaseApproving changes that potentially affect the product quality and performing below product quality reviewsA review of all lot of raw materials that failed to meet established specification(s)A review of all critical deviations or non-conformances and related investigationsA review of results of the stability monitoring programA review of all quality-related returns, complaints and recallsA review of adequacy of corrective actionsEvaluate and assess the results of the above reviews and decide whether corrective or any revalidation shall be undertaken. Documents the reasons for such corrective action and ensures agreed corrective actions is completed in a timely and effective mannerEnsures that training shall be regularly conducted by qualified individuals and shall cover, at a minimum, the particular operations that the employee performs and as applicable to the employee's functions.Ensures records of all the trainings are maintained and periodically assessedInvestigate the discrepancies established during reconciliation of labels issued, used and returnedEnsures raw material containers and closures shall at all times be handled and stored in a manner to prevent contaminationVerifies each container or grouping of containers for raw material or each lot of raw material shall be appropriately identified as to its status(i.e., quarantined, approved, or rejected)Ensures each lot of raw material shall be withheld from use/export until the lot has been sampled, tested, or examined, as appropriate, and released for use/export by QC.Supervisory ResponsibilitiesThis position directly supervises the Quality Control Manager and Quality Control Inspector Positions.Work EnvironmentThis job operates primarily in a professional office environment. This role routinely uses standard office equipment such as computers, phones, photocopiers, filing cabinets and fax machines.Some responsibilities require the employee to operate in a warehouse/ production environment using standard warehouse equipment such as forklifts, hand trucks, box cutters and tapedispensers.Physical DemandsThis is largely a desk-based role; however, some filing and other physical ability is required. This would require the ability to lift files, open filing cabinets and bend, stoop, or stand as necessary. This role also works with large machinery and electronics and requires appropriate safety equipment and practices when necessary. While performing the duties of this job, the employee is regularly required to use hands to finger, handle or feel; reach with hands and arms; and talk or hear. The employee frequently is required to stand; walk; and stoop, kneel, crouch or crawl. The employee is occasionally required to sit and climb or balance. The employee must regularly liftand/or move objects up to 10 pounds, frequently lift and/or move objects up to 50 pounds, and occasionally lift and/or move objects that weigh more than 100 pounds utilizing forklift or pallet jack. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus.Knowledge, Skills and Abilities Advanced communication skills. Advanced multi-tasking and organization skills. Advanced change management skills. Ability to create and maintain highest levels of confidentiality when dealing with proprietary information and sensitive situations. Intermediate to advanced math skills. Ability to define problems, collect data, establish facts, and draw valid conclusions. Intermediate to advanced knowledge of MS Office (Particularly Word and Excel). Six Sigma and/or other quality, continuous improvement, technical writing, regulatoryknowledge. Working knowledge of standard measuring tools and machinery. Expert knowledge of CDSCO, ISO, FDA, and other regulatory/ quality entities that impact areas of responsibility

What you'll do Own the test strategy and coverage across the web dashboard, the Rider App, the Teams App (Android + iOS), and the backend APIs. Design, write, and maintain detailed test cases and regression suites. Run smoke and sanity checks on every new build to catch breakages early before deeper testing - essential in a fast release cycle. Build and maintain automated tests to cover critical and repetitive flows, so manual effort goes where it's actually needed. Do thorough API testing - responses, edge cases, error handling, and data correctness behind the UI. Run performance and load testing on the APIs and platform to make sure it holds up under real traffic and high-volume telemetry. Carry out security testing - checking access controls, authentication/authorisation, data isolation between tenants, and common vulnerabilities before they reach production. Do integration testing across the apps, the backend, and third-party feeds (like telematics) to make sure the pieces work together, not just in isolation. Test on real Android and iOS devices, and across browsers, catching device- and platform-specific issues before users do. Validate each release and track issues through to resolution, distinguishing a genuine bug from a spec gap. Help define and improve QA processes as the product and team scale.Must-have skills 3-5 years in QA across web and mobile products. Strong foundation in test-case design, regression testing, and bug reporting with clear severity/priority judgment. Hands-on test automation - e.g. Selenium, Cypress, Playwright, or Appium - and the judgment to know what's worth automating. Solid API testing (Postman or similar), including validating data, not just status codes. Comfortable testing on real Android and iOS devices, and across browsers and platform versions. Performance / load testing experience - e.g. JMeter, k6, Locust, or Gatling - and the ability to design realistic load scenarios and read the results. Security testing fundamentals - access control and auth testing, data isolation, and awareness of common vulnerabilities (OWASP-style); hands-on with tools like OWASP ZAP or Burp Suite is a plus. Able to verify data behind the UI - basic comfort querying a database (we use MongoDB). Clear written communication - most of your output is test documentation and bug reports. Able to work independently - set up test coverage, prioritise, and run QA with minimal direction, owning the process end to end.

Key ResponsibilitiesQuality Strategy & QMS Leadership: Establish, implement, and maintain company-wide Quality Management Systems in compliance with industry standards (e.g., ISO 9001, IATF 16949, or ISO 13485).Process & Audit Oversight: Conduct internal quality audits, coordinate external vendor and client audits, and ensure swift resolution of non-conformances (NCRs).Root Cause & Failure Analysis: Lead investigations into product defects, customer complaints, and field failures using root-cause analysis tools (8D, 5-Why, Fishbone, CAPA).Quality Assurance & Control (QA/QC): Oversee incoming raw material inspections, in-process quality control, and final release testing to ensure adherence to strict engineering and customer specifications.Continuous Improvement: Drive lean manufacturing, Six Sigma methodologies, and Kaizen initiatives to reduce scrap rates, rework costs, and process variations.Supplier Quality Management: Evaluate supplier quality performance, define incoming inspection protocols, and collaborate with vendors to resolve material quality issues.Team Leadership & Training: Direct and mentor quality inspectors, QA engineers, and technicians; conduct quality compliance training across production departments.

Greeting From Vishakan Placement Service Walkin interview For Quality Management System (QMS) Manager PositionIndustry: Automotive / ManufacturingPosition: Quality Management System (QMS) ManagerExperience: Minimum 5 yearsPosition SummarySharpwire is looking for an experienced QMS Manager to lead and strengthen our Quality Management System, ensure compliance with IATF 16949 requirements, and drive continuous improvement across manufacturing and quality processes.The ideal candidate must have a minimum of 5 years of hands-on IATF 16949 audit experience, with strong exposure to internal audits, customer audits, certification audits, corrective actions, defect reduction, and quality performance monitoring.Key ResponsibilitiesQMS & IATF 16949* Lead and maintain the companys IATF 16949 Quality Management System.* Ensure compliance with applicable customer-specific requirements and quality standards.* Plan and conduct internal QMS and process audits.* Lead preparation for IATF, customer, and certification-body audits.* Ensure timely closure and effectiveness verification of audit findings and non-conformities.* Maintain QMS documentation, procedures, work instructions, records, and quality objectives.Defect Reduction & Quality Improvement* Drive initiatives to reduce internal and external defects, rejection, rework, scrap, and customer complaints.* Monitor quality KPIs and identify areas requiring immediate corrective or preventive action.* Lead Root Cause Analysis, 8D, CAPA, 5-Why, Fishbone, and other problem-solving activities.* Establish and monitor defect-reduction targets for production and supporting functions.* Work closely with Production, Engineering, Maintenance, and Supply Chain teams to eliminate recurring quality issues.Quality Trend Analysis* Track quality defects and trends by product, process, machine, shift, customer, supplier, and defect type.* Develop and maintain Pareto analysis, trend charts, rejection reports, and quality dashboards.* Identify recurring and emerging quality trends and initiate preventive actions before issues become major problems.* Present quality performance, trends, risks, and improvement actions to management.* Use data-driven analysis to identify opportunities for continuous improvement and defect prevention.Customer Quality* Monitor and manage customer complaints and quality concerns.* Ensure effective and timely response to customer complaints, including 8D reports and corrective actions.* Track customer PPM, complaints, returns, and other customer quality indicators.* Work with relevant teams to prevent recurrence of customer issues.Continuous Improvement* Drive PDCA and continual improvement activities throughout the organization.* Establish quality improvement projects focused on defect reduction, process capability, and customer satisfaction.* Promote a strong zero-defect and prevention-oriented quality culture.* Monitor the effectiveness of corrective and preventive actions.Team & Cross-Functional Leadership* Lead and develop the Quality team.* Train employees on QMS requirements, quality procedures, problem-solving, and audit readiness.* Coordinate with cross-functional teams to resolve quality issues.* Ensure accountability for quality objectives and improvement actions across departments.Required Qualifications & Experience* Bachelors degree/Diploma in Mechanical, Electrical, Industrial Engineering, Quality, or related field.* Minimum 5 years of hands-on IATF 16949 audit experience - mandatory.* Strong experience in IATF 16949 QMS implementation, maintenance, and auditing.* Experience handling IATF certification audits, customer audits, and internal audits.* Strong knowledge of:* IATF 16949* ISO 9001* Core Tools - APQP, PPAP, FMEA, MSA, SPC* 8D / CAPA / Root Cause Analysis* Process and Product Auditing* Control Plans* Statistical and trend analysis* Proven track record of reducing defects, rejection, scrap, rework, and customer complaints.* Strong analytical and problem-solving skills.* Good communication and leadership skills.* Proficiency in Excel and quality data analysis/reporting.Preferred* Automotive manufacturing experience.* Experience with wire, cable, harness, metal forming, stamping, or related manufacturing processes.* Certified IATF 16949 Internal Auditor / Lead Auditor.* Experience with customer-specific requirements and major automotive customer audits.* Experience implementing measurable quality improvement projects.Key Performance Indicators (KPIs)The QMS Manager will be responsible for driving measurable improvement in:* Internal rejection / defect PPM* Customer PPM* Customer complaints* Scrap and rework* Repeat defects* Audit non-conformities* Corrective-action closure effectiveness* Process audit compliance* Supplier quality performance* Cost of Poor Quality (COPQ)* Overall QMS effectivenessSuccess in This RoleSuccess will be measured by the ability to maintain a robust IATF 16949 QMS, achieve strong audit performance, identify quality trends early, eliminate recurring defects, reduce overall rejection and customer complaints, and establish a culture of prevention and continuous improvement at Sharpwire.If you want, I can also make this more aggressive and KPI-driven for hiring, including specific targets such as 30% defect reduction, zero repeat customer complaints, audit score targets, and PPM reduction.Job Shift : DAY (8.15AM -6.00PM) , NIGHT( 9.00PM -7.15AM)/ Sunday Week-offNo of openings: 3Age limit: Till 35 Immediate Joiner Must Work Location: Sriperumbudur Candidate nearby Location: Sriperumbudur, Kanchirpuram, Nemilin, Thandalam, manavala nagar Vellavedu,Veppampattu,Sevvapet,thiruninravur,poonamallee,thirumazhisai.Interested Candidate For Job Please Call immediately & Share your Resume Call/WhatsApp: HR Pradeep +91 955 195 2508

Greeting From Vishakan Placement Service !!!Walkin interview For Quality Management System (QMS) Manager PositionPosition: Quality Management System (QMS) ManagerExperience: Minimum 5 yearsIndustry: electrical component/Automotive / ManufacturingPosition SummarySharpwire is looking for an experienced QMS Manager to lead and strengthen our Quality Management System, ensure compliance with IATF 16949 requirements, and drive continuous improvement across manufacturing and quality processes.The ideal candidate must have a minimum of 5 years of hands-on IATF 16949 audit experience, with strong exposure to internal audits, customer audits, certification audits, corrective actions, defect reduction, and quality performance monitoring.Key ResponsibilitiesQMS & IATF 16949* Lead and maintain the companys IATF 16949 Quality Management System.* Ensure compliance with applicable customer-specific requirements and quality standards.* Plan and conduct internal QMS and process audits.* Lead preparation for IATF, customer, and certification-body audits.* Ensure timely closure and effectiveness verification of audit findings and non-conformities.* Maintain QMS documentation, procedures, work instructions, records, and quality objectives.Defect Reduction & Quality Improvement* Drive initiatives to reduce internal and external defects, rejection, rework, scrap, and customer complaints.* Monitor quality KPIs and identify areas requiring immediate corrective or preventive action.* Lead Root Cause Analysis, 8D, CAPA, 5-Why, Fishbone, and other problem-solving activities.* Establish and monitor defect-reduction targets for production and supporting functions.* Work closely with Production, Engineering, Maintenance, and Supply Chain teams to eliminate recurring quality issues.Quality Trend Analysis* Track quality defects and trends by product, process, machine, shift, customer, supplier, and defect type.* Develop and maintain Pareto analysis, trend charts, rejection reports, and quality dashboards.* Identify recurring and emerging quality trends and initiate preventive actions before issues become major problems.* Present quality performance, trends, risks, and improvement actions to management.* Use data-driven analysis to identify opportunities for continuous improvement and defect prevention.Customer Quality* Monitor and manage customer complaints and quality concerns.* Ensure effective and timely response to customer complaints, including 8D reports and corrective actions.* Track customer PPM, complaints, returns, and other customer quality indicators.* Work with relevant teams to prevent recurrence of customer issues.Continuous Improvement* Drive PDCA and continual improvement activities throughout the organization.* Establish quality improvement projects focused on defect reduction, process capability, and customer satisfaction.* Promote a strong zero-defect and prevention-oriented quality culture.* Monitor the effectiveness of corrective and preventive actions.Team & Cross-Functional Leadership* Lead and develop the Quality team.* Train employees on QMS requirements, quality procedures, problem-solving, and audit readiness.* Coordinate with cross-functional teams to resolve quality issues.* Ensure accountability for quality objectives and improvement actions across departments.Required Qualifications & Experience* Bachelors degree/Diploma in Mechanical, Electrical, Industrial Engineering, Quality, or related field.* Minimum 5 years of hands-on IATF 16949 audit experience - mandatory.* Strong experience in IATF 16949 QMS implementation, maintenance, and auditing.* Experience handling IATF certification audits, customer audits, and internal audits.* Strong knowledge of:* IATF 16949* ISO 9001* Core Tools - APQP, PPAP, FMEA, MSA, SPC* 8D / CAPA / Root Cause Analysis* Process and Product Auditing* Control Plans* Statistical and trend analysis* Proven track record of reducing defects, rejection, scrap, rework, and customer complaints.* Strong analytical and problem-solving skills.* Good communication and leadership skills.* Proficiency in Excel and quality data analysis/reporting.Preferred* Automotive manufacturing experience.* Experience with wire, cable, harness, metal forming, stamping, or related manufacturing processes.* Certified IATF 16949 Internal Auditor / Lead Auditor.* Experience with customer-specific requirements and major automotive customer audits.* Experience implementing measurable quality improvement projects.Key Performance Indicators (KPIs)The QMS Manager will be responsible for driving measurable improvement in:* Internal rejection / defect PPM* Customer PPM* Customer complaints* Scrap and rework* Repeat defects* Audit non-conformities* Corrective-action closure effectiveness* Process audit compliance* Supplier quality performance* Cost of Poor Quality (COPQ)* Overall QMS effectivenessSuccess in This RoleSuccess will be measured by the ability to maintain a robust IATF 16949 QMS, achieve strong audit performance, identify quality trends early, eliminate recurring defects, reduce overall rejection and customer complaints, and establish a culture of prevention and continuous improvement at Sharpwire.If you want, I can also make this more aggressive and KPI-driven for hiring, including specific targets such as 30% defect reduction, zero repeat customer complaints, audit score targets, and PPM reduction.Salary : As Per Company Standard Interview Round : Technical Round Job Shift : DAY (8.15AM -6.00PM) , NIGHT( 9.00PM -7.15AM)/ Sunday Week-offNo of openings: 3 Immediate Joiner must Work Location: THANDALAM MANNUR VILLAGE Papparapakkam Candidate nearby Location: Sriperumbedur, Kanchipuram, poonamallee,thirumazhisai Vellavedu,Veppampattu,Sevvapet,thiruninravur,poonamallee,Interested Candidate For Job Please Call immediately & Share your ResumePradeep HR +91 955 195 2508 (jobvpservice@gmail.com)

JOB PURPOSEThe Manager QA/QC will be responsible for managing the complete Quality Assurance and Quality Control function of the organization.The role will ensure that raw materials, manufacturing processes, finished products and dispatches consistently meet approved drawings, specifications, quality standards, customer requirements and applicable compliance requirements.The Manager QA/QC will establish robust quality systems, lead the QA/QC team, control rejection and rework, manage customer complaints and audits, drive root-cause analysis and CAPA, and continuously improve product and process quality.KEY RESPONSIBILITIESA. Quality Assurance - QA Develop, implement and maintain the company's Quality Management System (QMS). Prepare and implement Quality Policies, SOPs, Work Instructions and Inspection Standards. Establish quality objectives, procedures and KPIs. Conduct internal quality and process audits. Ensure compliance with applicable customer and quality requirements. Review and improve existing quality systems and processes. Establish preventive quality controls to minimize defects. Maintain proper quality documentation and records. Promote a Right First Time and zero-defect culture.B. Quality Control - QCManage and monitor quality at all stages:Incoming Material In-Process Finishing Assembly Final Inspection Packing Dispatch Establish inspection standards and checklists. Ensure incoming material inspection. Ensure in-process inspection at critical manufacturing stages. Conduct and monitor final inspection. Verify dimensions, tolerances, appearance, functionality and surface finish. Ensure products conform to approved drawings, samples and specifications. Ensure non-conforming products are properly identified, segregated and controlled.C. Raw Material & Incoming Quality Develop incoming inspection procedures for:o Brasso Irono Zinco Aluminiumo Steelo Bought-out componentso Packaging materials Verify material specifications, dimensions and quality. Monitor supplier quality performance. Coordinate with Purchase and Stores regarding rejected materials. Maintain supplier rejection records and quality performance data.D. In-Process Quality ControlMonitor quality during: Casting Forging Pressing CNC/VMC machining Drilling Tapping Grinding Buffing Polishing Finishing Plating Powder Coating PVD Assembly Responsibilities include: First-piece approval Process inspection Critical dimension monitoring Process parameter control Defect identification Rejection/rework control Process improvementE. Final Inspection & Product ReleaseEnsure finished products are inspected before dispatch for: Dimensions Tolerances Appearance Surface finish Plating/coating Colour/shade Assembly Functionality Strength/performance Packing Labelling QuantityEnsure products are released for dispatch only after meeting defined quality requirements.CUSTOMER QUALITY MANAGEMENT Handle customer quality complaints professionally and promptly. Investigate customer complaints and identify root causes. Prepare 8D, CAPA and Root Cause Analysis reports. Coordinate customer inspections and quality audits. Maintain customer complaint records and trend analysis. Ensure corrective actions are implemented within agreed timelines. Verify effectiveness of corrective actions. Communicate customer-specific requirements to Production and other departments. Monitor customer satisfaction and recurring quality issues.ROOT CAUSE ANALYSIS & CAPALead quality problem-solving using: 5 Why Analysis Fishbone / Ishikawa Pareto Analysis 7 QC Tools Process Analysis Failure AnalysisResponsibilities: Identify root cause rather than only treating symptoms. Raise NCRs for significant non-conformities. Define corrective and preventive actions. Assign responsibility and target dates. Monitor CAPA closure. Verify effectiveness. Prevent recurrence of defects.SUPPLIER QUALITY MANAGEMENT Evaluate and monitor supplier quality performance. Establish supplier quality standards. Conduct supplier audits where required. Monitor supplier rejection and defect trends. Issue Supplier Corrective Action Requests. Work with Purchase for supplier development. Support approval of new suppliers from a quality perspective. Maintain supplier quality scorecards.CUSTOMER & PRODUCT SPECIFICATION CONTROL Ensure availability of approved drawings and specifications. Ensure production works only against approved drawings/samples. Control drawing revisions and specification changes. Ensure customer-specific requirements are communicated to concerned departments. Establish product inspection standards for new products. Participate in NPD, sampling and product development activities.SURFACE FINISH & PLATING QUALITYEnsure quality control of: Polishing Buffing Electroplating Nickel Chrome Brass finishes Antique finishes PVD Powder Coating Other decorative/protective finishesMonitor defects such as: Scratches Dents Colour variation Uneven finish Stains Peeling Poor adhesion Plating defects Surface roughness Coating thickness variationTESTING & CALIBRATION Establish product testing requirements. Ensure availability of appropriate testing equipment. Monitor calibration of measuring and testing instruments. Maintain calibration schedules and records. Ensure measuring instruments are suitable for their intended application. Coordinate external testing/laboratory requirements where necessary.QUALITY TEAM MANAGEMENT Lead the QA/QC team effectively. Define responsibilities and targets for QC Inspectors. Allocate inspection manpower according to production requirements. Train QC personnel on inspection methods and quality standards. Conduct regular quality meetings. Evaluate team performance. Identify training requirements. Develop quality awareness among production employees. Ensure discipline and consistency in inspection practices.PRODUCTION & CROSS-FUNCTIONAL COORDINATIONWork closely with: Production PPC Tool Room NPD/Sampling Purchase Stores Finishing Maintenance Dispatch MerchandisingThe Manager QA/QC should act as a bridge between Quality and Production, ensuring that quality issues are resolved at the process level without unnecessarily affecting production schedules.QUALITY MIS & REPORTINGPrepare and review: Daily Quality Reports Incoming Inspection Reports In-Process Inspection Reports Final Inspection Reports Rejection Reports Rework Reports NCR Reports CAPA Reports 8D Reports Customer Complaint Reports Supplier Quality Reports Quality KPI Reports Monthly Quality MISAnalyse trends for:Rejection Rework Scrap Customer Complaints Supplier Defects Process Defectsand initiate improvement actions.REQUIRED TECHNICAL SKILLSThe candidate should have strong knowledge of: Builder/Architectural Hardware Manufacturing Brass, Iron, Zinc, Aluminium & Steel Products Engineering Drawings GD&T / Basic Tolerances Measuring Instruments AQL & Sampling Incoming/In-Process/Final Inspection Surface Finishing Plating & Coating QMS ISO 9001 Internal Auditing 7 QC Tools SPC Root Cause Analysis CAPA 8D Problem Solving Supplier Quality Calibration Process Auditing Quality DocumentationCOMPUTER SKILLS Advanced MS Excel Quality MIS Quality Dashboards Data Analysis Pareto Charts Rejection Trend Analysis MS Word PowerPoint ERP/MIS softwareEDUCATIONAL QUALIFICATIONB.Tech / B.E. / Diploma in: Mechanical Engineering Production Engineering Industrial Engineering Metallurgy Quality Engineering or related technical discipline.Certification in ISO 9001, Six Sigma, Quality Auditing or Quality Management will be an advantage.EXPERIENCE8-12 years of relevant experience, preferably in: Builder Hardware Architectural Hardware Brass Hardware Iron Hardware Zinc Hardware Aluminium Hardware Sanitary Hardware Metal Components Engineering Manufacturing Export-oriented ManufacturingExperience in international customer requirements, export quality standards and customer audits will be preferred.

We are seeking an experienced Quality Manager to ensure our products meet high-quality standards in Coimbatore, India. The ideal candidate will have 6 to 12 years of experience and a background in quality management.Key Responsibilities:1. Quality Assurance Oversight: Develop and implement quality assurance policies and procedures to maintain product quality throughout the production process.2. Team Leadership: Lead and mentor a team of quality assurance professionals, providing guidance and support to enhance their skills and performance.3. Data Analysis: Analyze quality data to identify trends, areas for improvement, and potential risks, enabling informed decision-making for better quality outcomes.4. Compliance Management: Ensure compliance with industry standards and regulatory requirements, conducting regular audits and inspections to assess adherence.5. Customer Liaison: Collaborate with customers to address quality-related issues and implement corrective actions as needed, ensuring customer satisfaction remains a priority.Required Skills and Expectations:The ideal candidate should have a degree and several years of experience in quality management. Strong leadership and communication skills are essential for collaborating with various teams. A detail-oriented mindset and analytical skills are necessary for data analysis. The candidate should be proactive in problem-solving and capable of driving quality improvement initiatives. Experience with quality management systems and familiarity with quality assurance tools is advantageous. The position requires working in an office environment, and male candidates are preferred for this role.

1. Plan, Develop,Organize ,Implement,Evaluate & direct the nursing service departments.Monitor the leave granting of Nursing Personnel.2.Monitor the In-service/Education.3.Constant Vigilance with current rules, regulations & guidelines that governn the long-term care facility with the help of Medical Superintendent.4.Continuous motivating the staff regarding high standard of care.5.Do timely & biasfree Performance appraisal.6.Develop,Maintain & periodically update the nursing service procedures manual and nursing service objectives & Philosophy.7.Assist the CQI Committee in developing and implementing appropraite plans of action to correct identified deficiencies.8.Prepare & Overseeing the department Budgets.9.Interacting with Doctors.team members ,staff & patients & family members.10.Active Participation in Interdisciplinary team activity.11.Active Participation in nursing quality activity.12.Participate in the formulation of nursing services, Objectives & Policies.13.To keep Medical Superintendent /Managing Director updated about day to day nursing services.14.To take ground round with the Administrative Personnel regularly.15.Dealing problems & crisis during ward round.16.To Check quality of food in canteen.17.Plan Wards Management with the nursing of each unit/ward.18.Conduct regualr physcial verification of hospital's stock , initiate condemnation of old & worn out articles & procurement of new articles.19.Act as a Public Relations officer of the unit and deal with the Problems faced by the Nursing Sister.

Required - Manager Quality (Fabrication Industry)Name of the Plant : Poshs Cinoti Pvt Ltd. ( Form Work Fabrication & Permanent Structure )Plant Address :GAT NO.832,836,838,864,865,866, Asawali,Taluka-Khandala, Dist-Satara, Maharashtra Important Skills - Quality Manager (Formwork Fabrication Industry)A)Quality Management Systems & Compliance1)Strong expertise in ISO 9001, IATF 16949, APQP, PPAP, Six Sigma2)Ability to define, implement, and enforce in-house quality procedures, standards, and documentation3)Welding & Fabrication Quality Expertise4)In-depth knowledge of fabrication processes and welding methodology (WPS, PQR)5)Understanding of latest welding techniques and inspection requirementsProblem Solving, CAPA & Customer Complaint Handling6)Root Cause Analysis, corrective & preventive action (CAPA) effectiveness review7)Ownership of internal & external customer complaints and rejection reductionB)Quality Control, Inspection & Calibration Management1)Monitoring incoming, in-process & final inspections as per Quality PlanControl of measuring instruments, calibration schedules & inspection reports before dispatch2)Leadership, Training & Continuous Improvement3)Ability to lead and supervise 6-8 quality engineers/technical staff4)Identifying training needs, driving continuous improvement, and facilitating quality culture across productionC)Very important Skill : 1)Knowledge of RDSO certification & documentation Experience : 10 to 15 years in Heavy Fabrication, Auto, Auto Ancillaries, Tier I Salary Range : CTC 07.00 to 10.00 Lac / YearSend resume on : plntmgrhr01@poshscinoti.com or whats app on 9960300915Dhanaji Deshmukh Plant HR Manager ( 9960300915 )

We are seeking a Quality Manager with 5 to 10 years of experience to ensure high-quality standards in our projects. This role is fully remote and requires an I.T.I. qualification.Key Responsibilities:1. Quality Assurance Oversight: Develop and implement quality control processes to ensure products meet established standards. Regularly review processes and outcomes to identify areas for improvement.2. Team Leadership: Manage a team of quality inspectors, providing training and support. Foster a collaborative environment where team members are encouraged to share insights and ideas.3. Data Analysis: Analyze quality data and metrics to track performance, identify trends, and propose actionable solutions to enhance quality. Present findings to management with recommendations for improvement.4. Compliance Management: Ensure that all quality processes comply with industry standards and regulations. Keep abreast of changes in regulations and adjust practices accordingly.5. Customer Interaction: Maintain open lines of communication with customers regarding quality concerns. Address issues promptly and ensure customer feedback is integrated into quality procedures.Required Skills and Expectations:The ideal candidate should possess strong analytical skills and attention to detail to ensure meticulous quality control. Excellent communication and interpersonal skills are essential for effective team management and customer relations. A proactive attitude towards problem-solving and the ability to work independently in a remote setting is crucial. Experience in process improvement methodologies, such as Six Sigma or Kaizen, is highly desirable.

Job Setting and operating of VTL machines like Yu-shine, Hyundai,Taiton,Bullard CNCKnowledge of VTL machines programming.Fully Conversant with Siemens and Fanuc Programming structure and NomenclatureKnowledge of larger size component machining.Knowledge of steel & cast iron machining parametersOperating knowledge of machining processes & Drawing studyKnowledge of measuring instruments such as Micrometers, Vernier caliper, dial indicators, Dial bore gauge & stick micrometer.Implementation of 5S in shop floor

Quality Oversight & ApprovalApprove analytical results, reports, protocols, methods, specifications, and other quality-related documents.Ensure the integrity, accuracy, and regulatory compliance of analytical and laboratory data.Provide final quality approval for services and deliverables provided to clients.2. Quality Management System (QMS)Establish, maintain, and continuously improve the Quality Management System (QMS) in compliance with GMP, GLP, and applicable regulatory guidelines.Ensure effective management of SOPs, deviations, CAPAs, change controls, OOS/OOT investigations, complaints, and risk management activities.Ensure data integrity compliance in line with ALCOA+ principles across all systems and documentation.3. Regulatory ComplianceEnsure compliance with applicable global regulations and guidelines, including FDA, EMA, ICH, WHO, and ISO standards.Lead, support, and manage regulatory inspections, client audits, and third-party audits.Act as the primary quality point of contact for regulatory authorities, auditors, and customers.4. Systems & ValidationReview and approve validation activities including analytical method validation, equipment qualification (IQ/OQ/PQ), computer system validation (CSV), and process validation.Ensure laboratory instruments, electronic systems, and software meet regulatory and data integrity requirements.5. Training & Quality CultureEnsure appropriate training of personnel on GMP, GLP, SOPs, and quality best practices.Promote and sustain a strong quality culture and compliance mindset across the organization.6. Risk Management & Continuous ImprovementIdentify potential quality and compliance risks and implement effective mitigation strategies.Drive continuous improvement initiatives to enhance regulatory compliance, operational efficiency, and service quality.

Greeting From Vishakan Placement Service !!!! Walkin interview For Experience Candidate in Quality Management System (QMS) Manager Position. Industry: Electrical /Automotive Manufacture IndustryPosition: Quality Management System (QMS) ManagerExperience: Minimum 5 +yearsPosition SummarySharpwire is looking for an experienced QMS Manager to lead and strengthen our Quality Management System, ensure compliance with IATF 16949 requirements, and drive continuous improvement across manufacturing and quality processes.The ideal candidate must have a minimum of 5 years of hands-on IATF 16949 audit experience, with strong exposure to internal audits, customer audits, certification audits, corrective actions, defect reduction, and quality performance monitoring.Key ResponsibilitiesQMS & IATF 16949* Lead and maintain the companys IATF 16949 Quality Management System.* Ensure compliance with applicable customer-specific requirements and quality standards.* Plan and conduct internal QMS and process audits.* Lead preparation for IATF, customer, and certification-body audits.* Ensure timely closure and effectiveness verification of audit findings and non-conformities.* Maintain QMS documentation, procedures, work instructions, records, and quality objectives.Defect Reduction & Quality Improvement* Drive initiatives to reduce internal and external defects, rejection, rework, scrap, and customer complaints.* Monitor quality KPIs and identify areas requiring immediate corrective or preventive action.* Lead Root Cause Analysis, 8D, CAPA, 5-Why, Fishbone, and other problem-solving activities.* Establish and monitor defect-reduction targets for production and supporting functions.* Work closely with Production, Engineering, Maintenance, and Supply Chain teams to eliminate recurring quality issues.Quality Trend Analysis* Track quality defects and trends by product, process, machine, shift, customer, supplier, and defect type.* Develop and maintain Pareto analysis, trend charts, rejection reports, and quality dashboards.* Identify recurring and emerging quality trends and initiate preventive actions before issues become major problems.* Present quality performance, trends, risks, and improvement actions to management.* Use data-driven analysis to identify opportunities for continuous improvement and defect prevention.Customer Quality* Monitor and manage customer complaints and quality concerns.* Ensure effective and timely response to customer complaints, including 8D reports and corrective actions.* Track customer PPM, complaints, returns, and other customer quality indicators.* Work with relevant teams to prevent recurrence of customer issues.Continuous Improvement* Drive PDCA and continual improvement activities throughout the organization.* Establish quality improvement projects focused on defect reduction, process capability, and customer satisfaction.* Promote a strong zero-defect and prevention-oriented quality culture.* Monitor the effectiveness of corrective and preventive actions.Team & Cross-Functional Leadership* Lead and develop the Quality team.* Train employees on QMS requirements, quality procedures, problem-solving, and audit readiness.* Coordinate with cross-functional teams to resolve quality issues.* Ensure accountability for quality objectives and improvement actions across departments.Required Qualifications & Experience* Bachelors degree/Diploma in Mechanical, Electrical, Industrial Engineering, Quality, or related field.* Minimum 5 years of hands-on IATF 16949 audit experience - mandatory.* Strong experience in IATF 16949 QMS implementation, maintenance, and auditing.* Experience handling IATF certification audits, customer audits, and internal audits.* Strong knowledge of:* IATF 16949* ISO 9001* Core Tools - APQP, PPAP, FMEA, MSA, SPC* 8D / CAPA / Root Cause Analysis* Process and Product Auditing* Control Plans* Statistical and trend analysis* Proven track record of reducing defects, rejection, scrap, rework, and customer complaints.* Strong analytical and problem-solving skills.* Good communication and leadership skills.* Proficiency in Excel and quality data analysis/reporting.Preferred* Automotive manufacturing experience.* Experience with wire, cable, harness, metal forming, stamping, or related manufacturing processes.* Certified IATF 16949 Internal Auditor / Lead Auditor.* Experience with customer-specific requirements and major automotive customer audits.* Experience implementing measurable quality improvement projects.Key Performance Indicators (KPIs)The QMS Manager will be responsible for driving measurable improvement in:* Internal rejection / defect PPM* Customer PPM* Customer complaints* Scrap and rework* Repeat defects* Audit non-conformities* Corrective-action closure effectiveness* Process audit compliance* Supplier quality performance* Cost of Poor Quality (COPQ)* Overall QMS effectivenessSuccess in This RoleSuccess will be measured by the ability to maintain a robust IATF 16949 QMS, achieve strong audit performance, identify quality trends early, eliminate recurring defects, reduce overall rejection and customer complaints, and establish a culture of prevention and continuous improvement at Sharpwire.If you want, I can also make this more aggressive and KPI-driven for hiring, including specific targets such as 30% defect reduction, zero repeat customer complaints, audit score targets, and PPM reduction.Job Shift : DAY (8.15AM -6.00PM) , NIGHT( 9.00PM -7.15AM)/ Sunday Week-offNo of openings: 6Age limit: Till 40Immediate Joiner Must Work Location: THANDALAM MANNUR VILLAGE Papparapakkam Tiruvallur Candidate nearby Location: Sriperumbedur , Kanchipuram, Poonamallee, Vellavedu,Veppampattu,Sevvapet,thiruninravur,poonamallee,thirumazhisai

Key Responsibilities and DutiesI. Strategic Leadership & QMS ManagementStrategy Development: Define and execute the long-term quality vision, strategy, policies, and procedures in alignment with overall company goals and profitability targets.System Ownership: Own the Quality Management System (QMS) (e.g., ISO 9001, IATF 16949, AS9100, etc.), ensuring its effectiveness, compliance, and continuous improvement.Budget Management: Develop and manage the Quality Department budget, including staffing, training, technology, and compliance costs.Reporting: Regularly report to the executive leadership team on quality performance, key metrics (KPIs), identified risks, and corrective actions.II. Quality Assurance and ControlProcess Control: Oversee the development and implementation of all quality control processes, including Incoming Quality Control (IQC), In-Process Quality Control (IPQC), and Outgoing Quality Assurance (OQA).Audits & Compliance: Plan and manage internal and external audits (customer, certification bodies). Ensure complete compliance with all relevant industry, regulatory, and statutory requirements.Documentation: Establish and maintain robust document control procedures for all quality-related records, manuals, work instructions, and specifications.III. Continuous Improvement & Problem SolvingRoot Cause Analysis (RCA): Lead and drive effective Root Cause Analysis (RCA) and implement Corrective and Preventive Actions (CAPA) for all non-conformances, customer complaints, and quality escapes.Methodology: Champion continuous improvement methodologies (e.g., Lean, Six Sigma, 8D, FMEA, SPC) across all departments to reduce defects, scrap, and rework.Supplier Quality: Manage and monitor supplier quality performance, conducting supplier audits and driving improvement plans to ensure the quality of outsourced materials/components.IV. Team Leadership & CultureStaff Development: Lead, mentor, and develop the Quality team (Inspectors, Engineers, Auditors) to ensure they have the necessary skills and certifications.Training: Develop and deliver quality awareness training across the organization to embed a Culture of Quality in every functional area.Customer Liaison: Act as the senior representative for quality matters during high-level customer discussions and problem resolution.

Greeting From Vishakan Placement Service Walkin interview For Experience Candidate in Quality Management System (QMS) Manager PositionPosition: Quality Management System (QMS) ManagerExperience: Minimum 5 yearsIndustry: Automotive / ManufacturingPosition SummarySharpwire is looking for an experienced QMS Manager to lead and strengthen our Quality Management System, ensure compliance with IATF 16949 requirements, and drive continuous improvement across manufacturing and quality processes.The ideal candidate must have a minimum of 5 years of hands-on IATF 16949 audit experience, with strong exposure to internal audits, customer audits, certification audits, corrective actions, defect reduction, and quality performance monitoring.Key ResponsibilitiesQMS & IATF 16949* Lead and maintain the companys IATF 16949 Quality Management System.* Ensure compliance with applicable customer-specific requirements and quality standards.* Plan and conduct internal QMS and process audits.* Lead preparation for IATF, customer, and certification-body audits.* Ensure timely closure and effectiveness verification of audit findings and non-conformities.* Maintain QMS documentation, procedures, work instructions, records, and quality objectives.Defect Reduction & Quality Improvement* Drive initiatives to reduce internal and external defects, rejection, rework, scrap, and customer complaints.* Monitor quality KPIs and identify areas requiring immediate corrective or preventive action.* Lead Root Cause Analysis, 8D, CAPA, 5-Why, Fishbone, and other problem-solving activities.* Establish and monitor defect-reduction targets for production and supporting functions.* Work closely with Production, Engineering, Maintenance, and Supply Chain teams to eliminate recurring quality issues.Quality Trend Analysis* Track quality defects and trends by product, process, machine, shift, customer, supplier, and defect type.* Develop and maintain Pareto analysis, trend charts, rejection reports, and quality dashboards.* Identify recurring and emerging quality trends and initiate preventive actions before issues become major problems.* Present quality performance, trends, risks, and improvement actions to management.* Use data-driven analysis to identify opportunities for continuous improvement and defect prevention.Customer Quality* Monitor and manage customer complaints and quality concerns.* Ensure effective and timely response to customer complaints, including 8D reports and corrective actions.* Track customer PPM, complaints, returns, and other customer quality indicators.* Work with relevant teams to prevent recurrence of customer issues.Continuous Improvement* Drive PDCA and continual improvement activities throughout the organization.* Establish quality improvement projects focused on defect reduction, process capability, and customer satisfaction.* Promote a strong zero-defect and prevention-oriented quality culture.* Monitor the effectiveness of corrective and preventive actions.Team & Cross-Functional Leadership* Lead and develop the Quality team.* Train employees on QMS requirements, quality procedures, problem-solving, and audit readiness.* Coordinate with cross-functional teams to resolve quality issues.* Ensure accountability for quality objectives and improvement actions across departments.Required Qualifications & Experience* Bachelors degree/Diploma in Mechanical, Electrical, Industrial Engineering, Quality, or related field.* Minimum 5 years of hands-on IATF 16949 audit experience - mandatory.* Strong experience in IATF 16949 QMS implementation, maintenance, and auditing.* Experience handling IATF certification audits, customer audits, and internal audits.* Strong knowledge of:* IATF 16949* ISO 9001* Core Tools - APQP, PPAP, FMEA, MSA, SPC* 8D / CAPA / Root Cause Analysis* Process and Product Auditing* Control Plans* Statistical and trend analysis* Proven track record of reducing defects, rejection, scrap, rework, and customer complaints.* Strong analytical and problem-solving skills.* Good communication and leadership skills.* Proficiency in Excel and quality data analysis/reporting.Preferred* Automotive manufacturing experience.* Experience with wire, cable, harness, metal forming, stamping, or related manufacturing processes.* Certified IATF 16949 Internal Auditor / Lead Auditor.* Experience with customer-specific requirements and major automotive customer audits.* Experience implementing measurable quality improvement projects.Key Performance Indicators (KPIs)The QMS Manager will be responsible for driving measurable improvement in:* Internal rejection / defect PPM* Customer PPM* Customer complaints* Scrap and rework* Repeat defects* Audit non-conformities* Corrective-action closure effectiveness* Process audit compliance* Supplier quality performance* Cost of Poor Quality (COPQ)* Overall QMS effectivenessSuccess in This RoleSuccess will be measured by the ability to maintain a robust IATF 16949 QMS, achieve strong audit performance, identify quality trends early, eliminate recurring defects, reduce overall rejection and customer complaints, and establish a culture of prevention and continuous improvement at Sharpwire.If you want, I can also make this more aggressive and KPI-driven for hiring, including specific targets such as 30% defect reduction, zero repeat customer complaints, audit score targets, and PPM reduction.Job Shift : DAY (8.15AM -6.00PM) , NIGHT( 9.00PM -7.15AM)/ Sunday Week-offNo of openings: 3Age limit: Till 35 Immediate Joiner Must Work Location: THANDALAM MANNUR VILLAGE Papparapakkam Tiruvallur Candidate nearby Location: Sriperumbedur,kanchipuram Vellavedu,Veppampattu,Sevvapet,thiruninravur,poonamallee,thirumazhisaiInterested Candidate For Job Please Call immediately & Share your Resume Pradeep HR +91 955 195 2508 (jobvpservice@gmail.com)